tracker - pursuit clocks for cycling track

tracker - pursuit clocks for cycling track
TRACKER - PURSUIT CLOCKS FOR CYCLING TRACK
Overview
The Tracker is designed to complement the Swiss Timing
Cycling Starting Gates and also integrates with our
Quantum timing system.
Normally working in pairs for Cycling Track, they are used
as the official start device for Individual and Team Pursuit,
500m Time Trial, Kilometre Time Trial and Team Sprint.
TOP FEATURES
■■ Countdown display & sound
■■ Lap counter
■■ Red and green semaphore (signalling)
■■ Integrated keyboard
■■ Manual rotation
■■ Integrated battery
When linked to Starting Gates, they ensure a fully
automated start sequence. After a programmable
countdown time with audible signals, the Tracker perfectly
synchronises the start signal with the timing system, the
opening of the Starting Gates and the starting sound.
The start signal can be selected from a choice of sounds
including a horn and a sampled gun shot. Once the race
is underway, the countdown resets to become the lap
counter and bell.
An integrated sensor adapts the luminosity of its 150 LED
digits to the ambient light conditions. When integrated
with a cycling timing system from Swiss Timing, red and
green semaphore (signalling) lamps mounted above the
digits can indicate in real time the corresponding athletes‘
contact with their finish line during pursuit style races.
The easy-to-use Tracker controller LCD matrix screen
shows the status of the competition and provides
access to all of the configurable options. Lap counter
functions can be selected by the officials using the
console or an integrated keypad on the side of the clocks.
The Tracker is homologated by the International Cycling
Union (UCI) for national and international competitions,
and is used worldwide by Tissot Timing at all of their major
events.
Intellectual property of Swiss Timing. All rights reserved, especially those of reproduction and distribution to third parties.
HOW IT WORKS
SPECIFICATIONS
During the start phase, the Trackers display a 50-second
countdown, as required by the UCI rules. Geographically
located at the centre of the Velodrome, the „Official
Starter“ launches the countdown from the Main Judge
Controller.
TRACKER SPECIFICATIONS
Article number
3442.900
Housing width
640 mm
(690 mm with handles)
Housing
715 x 155 mm (H x D)
To help the athletes to stay concentrated on the start
signal, the Tracker beeps at 30 seconds, 10 seconds, and
then every second for the last five seconds, with a different
sound for the last beep. The volume is adjustable, and
the last sound (signalling the start) can be switched to a
synthesised pistol sound. As soon as both Starting Gates
are opened, the timing starts and the Tracker automatically
switches to „Lap Counter“ mode after 5 seconds. All
distance values and the amount of laps are entered in the
Main Judge Controller prior to the race.
Digit height
26 cm
Support height
adjustable 1040 to 1490 mm
Weight with support
21.6 kg
Backup battery life
4 hours
Power supply
115-230 VAC, 50/60 Hz
Power consumption
100 VA
Countdown sound
Beep (500 and 1000 Hz)
Countdown start
Bang or beep
Bell (synthesised)
Both referees assigned as lap counters may independently
decrease the laps by using a keypad located on the left
side of the clock. The system is used by Swiss Timing, and
is homologated by the UCI for national and international
competitions.
Last Lap indication
sound
Volume
Adjustable, up to 102 dB
Integrated keypad
4 keys (clear, lap +, lap-, bell
control)
Operating temperature
0° to 50°C
Storage temperature
-10° to +50°C
Protection
IP 55
Certification
CE and RoHS compliant
TRACKER SET PACKAGE (3442.901)
Article
Qty
MAIN JUDGE CONTROLLER SPECIFICATIONS
Art. number
Tracker 2 digits
2
3442.702
Support
1
9051.6335
Main Judge Controller
1
3442.722
TYPICAL STAND ALONE CONFIGURATION
5
6
8
H
o
r
n
2m
S
h
i
f
t
4
Tu 7PM
2.2 kg
Display type
240 x 128 pixels matrix LCD
Power supply
12VDC 110/230V AC/DC
Operating temperature
0° to +50°C
Storage temperature
-10° nto +50°C
Protection
IP42
Certification
CE and RoHS compliant
adapter included
3442.702
E
n
t
e
r
3418.702
7
1
2
3
4
5
6
7
8
C
L
R
0
115/230VAC
9
.
I
1
3442.722
Tu 4PF
2
Tu 3PF
4
Tu 7PM
1
Power IN
2
DATA IN
4
START OUT
5
RS422 TRACKER
6
Start/Stop external (optional)
7
Power supply
8
Semaphore command (analog input, not used)
9
Countdown for TV (out) & digital Semaphore
command (in)
Tu 4PF
1874.005
115/230VAC
5m
Tu 7PM
50m
1874.005
115/230VAC
1871.050
9051.6335
Tu 7PF
Tu 7PF
Tu 7PM
3442.605
50m
1871.050
15m
15m
9051.6335
1881.015
1881.015
3358.600
3358.600
3358.601
3358.601
Intellectual property of Swiss Timing. All rights reserved, especially those of reproduction and distribution to third parties.
Swiss Timing LTD
P.O. Box 138, Rue de I‘Envers 1
CH-2606 Corgémont - Switzerland
Phone +41 32 488 36 11
info@swisstiming. com
www.swisstiming.com
Tracker/10-2015
Tu 3PF
Weight
optional
TU 7PM
9
2
336 x 210 x 84 mm (HxWxD)
1.9m
3442.702
1
Dimensions
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising