U.3860LS (Lever Handles)

U.3860LS (Lever Handles)
www.rohlhome.com
PERRIN & ROWE® HOLBORN HIGH NECK WIDESPREAD
LAVATORY FAUCET
Perrin & Rowe® Bath Holborn
U.3860LS (Lever Handles)
WARRANTY
• Fixed spout
• Brass constuction
• 4 1/2” spout reach
• 3 x 1 3/8” hole cutouts
• Ceramic disc control cartridges
• Matching tub filler U.3848LS or U.3849X
• 1.2 GPM
• 1/2” NPSM connections
• Polished Chrome
• Polished Nickel
• Satin Nickel
• Limited Lifetime
2 5/8”
4 1/2 "
Ø 2 1/4 "
4"
5 1/4 "
Ø2”
Ø1 3/8”
hole
2 5/8 "
COLORS/FINISHES
1 1/2” MAX
FEATURES
Ø1 1/8”
1/2” NPT
HOT IN
COLD IN
Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
www.rohlhome.com
INSTALLATION INSTRUCTIONS
native product) to
The Transitional Bathroom Collection
5LS
6X
Installation & User Guide
9.25150 (1.5GPM)
9.25120 (1.2GPM)
9.19653*
615
"M
AX
•U.3955LS
•U.3956X
6
1
"-
5"
X
MA
9.13196 R
1 .1/2" MAX
9.01140* H
9.01141* C
6709*
Ø1. 3/8"
HOLE
Ø 2 .3/8"
HOT
IN
Ø1. 1/8"
1 .1/2" MAX
1 /2" NPT
Ø1. 3/8"
HOLE
Ø1. 1/8"
COLD
IN
COLD
IN
9.26705*
Ø 2 .3/8"
1 /2" NPT
Ø 1 .1/4"
atest technology and
uct and take this
lease contact us to
003830U
3 HOLE LAVATORY SETS
•U.3860LS
•U.3861X
HOT
IN
11
"C
RS
MA
X
Temp Range:
Min 34°F
Max 185°F
Recommended
Working Pressure:
Min 15 psi
Max 75 psi
Ideal performance obtained with equal hot & cold pressures.
O 1 .1/4"
Issue 2
Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
www.rohlhome.com
INSTALLATION INSTRUCTIONS
The Transitional Bathroom Collection
Installation & User Guide
Congratulations on the purchase of your Perrin & Rowe bathroom product. Correctly installed and with sensible care, this
product will give you many years of trouble free service.
3
IMPORTANT INFORMATION
Before you proceed... We recommend you engage the services of a registered plumber to install this product.
In addition to the guide below it is essential that the written information overleaf is carefully read and understood.
Flush the plumbing system before installation.
Preparation for the installation.
Flush the pipework before installing this
faucet.
1
Spout
Large Base
Seal
WORK
Clamp Plate
Securing Nuts
Base Ring
SURFACE
Clamp Bolt
Once unpacked remove large & small base seals,
rosette, hood & lever, securing nut, clamp plate,
pop-up and top waste ready for installation.
SPOUT
• Assemble the spout by placing the hoses through the Ø1. 3/8"
hole in the work surface, ensuring the base ring & rubber seal
are in place.
HOT
IN
4
• Place clamp plate and securing nuts onto the clamp bolt,
tighten with spanner provided to underside of work surface.
Box Spanner
To install the side valve, remove hood, rosette, fixing ring & base seal.
Pop Rubbe
Adjust the backnut to allow the valve body to be passed up through
the work surface hole.
Clamp
Bracket
Pop-U
Shaf
Thread on the Fixing Ring, ensuring the Base Seal is in place.
2
Orientate the Valve Body to allow the Flexible Hose to be connected
without any kinks.
Hood
Rosette
Fixing Ring
Base Seal
Vernier
Insert
Valve Body
Backnut
Flexible Hose
Po
Place Rosette over the Fixing Ring then screw down the Hood onto
the Valve Body ensuring the Lever or X-Top is correctly orientated.
The Lever should rotate forward to turn the flow on.
The Fixing Ring can now be screwed up so the Rosette meets the
Hood.
Tighten the backnut to securly fix the side valve in place, making minor
adjustments to ensure the lever remains correctly orientated.
Once fully secured check that the Flexible Hose remains kink free.
Repeat this process for the other side valve.
BEFORE USE
• Carefully check the installat
• If further building work is to
• Please ensure that the insta
CARE & MAINTENANCE
• Occasional cleaning with w
the plated finish in good co
• If you wish to occasionally
metal cleaner such as AUT
• Do not use any cleaners o
• Do not use proprietary ab
plated finish and void you
Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
www.rohlhome.com
INSTALLATION INSTRUCTIONS
sensible care, this
3
Connect and tighten the flexible hoses.
Connect HOT & COLD water supplies to the side valve
inlets.
his product.
Ensure all connections are firmly tightened.
and understood.
& small base seals,
nut, clamp plate,
r installation.
HOT
IN
COLD
IN
4
ough the Ø1. 3/8"
ng & rubber seal
Pop-Up
O Ring
Top Waste
clamp bolt,
work surface.
Foam
Seal
Please Note: Ceramic disc valves are fitted as
standard to this mixer. Flow from FULLY OFF to
FULLY ON is achieved by rotating the handles a
quarter turn.
Adjusting Sink Waste
• Ensure that pop-up shaft is in position alongside pop-up
rod.
• Shaft and rod can be cut if space is restricted.
• Secure pop-up using clamp bracket.
fixing ring & base seal.
Pop - Up Rod
Rubber Seal
e passed up through
Clamp
Bracket
Pop-Up
Shaft
Seal is in place.
Hose to be connected
down the Hood onto
correctly orientated.
w on.
e Rosette meets the
e in place, making minor
ctly orientated.
e remains kink free.
• Adjust position of clamp bracket to achieve maximum
movement of pop-up shaft.
Bottom
Waste
• Place pop-up into waste and adjust movement of
pop-up shaft.
BEFORE USE
• Carefully check the installation for leaks.
• If further building work is to be carried out in the vicinity, cover the product to avoid damaging the finish.
• Please ensure that the installation complies with local plumbing codes.
CARE & MAINTENANCE
• Occasional cleaning with warm soapy water, followed by a polish with a soft cloth is all that is required to keep
the plated finish in good condition.
• If you wish to occasionally polish your tap and it has a Chrome, Nickel or Pewter finish, we recommend a gentle
metal cleaner such as AUTOSOL metal polish, which is available from hardware and automotive parts stores.
• Do not use any cleaners on Gold or English Bronze taps.
• Do not use proprietary abrasive liquids, powders, or pads to clean the product. You will damage the
plated finish and void your warranty.
Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
www.rohlhome.com
INSTALLATION INSTRUCTIONS
ROHL WARRANTY POLICY
All products supplied by ROHL carry warranties against manufacturing defects.
Perrin & Rowe products carry a Limited Lifetime Warranty.
ROHL LLC will provide free of charge, as its options, replacement part(s) or product (or a comparable alternative product) to
replace those which have proven defective in materials or workmanship.
For full ROHL LLC WARRANTY please contact ROHL or visit www.rohlhome.com
SPARES
•U.3860LS
•U.3861X
•U.3955LS
•U.3956X
9.01852*
9.01023*
9.24315
9.01024* H
9.01025* C
9.18056*
9.14053
9.12056*
9.193784
9.15402
9.201880*
9.18381*
9.25955
(1.2GPM)
9.18952*
9.01140* H
9.01141* C
9.12056*
9.18056*
9.13195 L
9.13196 R
9.14053
9.13196 R
9.30195
L
9.30196
R
•U.3860LS
•U.3861X
9.28400
9.28511
9.26709*
1 .1/2" MAX
9.26860*
9.25150 (1.5GPM)
9.25120 (1.2GPM)
9.19653*
1 /2" NPT
Ø 2 .3/8"
9.26400
9.26705*
Ø1
* Where indicated please specify color
SPARE PARTS & SERVICE
3 Parker
Irvine
CA 92618
(714) 557-1933
H
IN
Perrin & Rowe products are manufactured in the UK, using the latest technology and
built to the highest quality standards.
We would like to thank you for purchasing a Perrin & Rowe product and take this
opportunity to invite you to look at other luxury products by us. Please contact us to
recieve our latest catalogue.
www.rohlhome.com
Perrin & Rowe is a registered trademark.
9003830U
Issue 2
Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
Temp Range:
Min 34°F
Max 185°F
Recommende
Working Pres
Min 15 psi
Max 75 psi
Ideal perform
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising