ColorKey Mover MiniWash Quad

ColorKey Mover MiniWash Quad
Mover MiniWash QUAD-W 7
CKU01-5020 (US) / CKE01-5020 (EU)
USER MANUAL
Introduction
Thank you for purchasing the ColorKey Mover MiniWash QUAD-W 7. Please read these
instructions carefully before use. Operating this fixture according to these instructions is
important to avoid any possible damage or accidents caused by misuse.
Packing list
n
1x Mover MiniWash QUAD-W 7 moving head fixture
n
1x DMX cable
n
1x Power cord
n
User Manual
Safety
Caution! Opening this unit voids warranty. Contact ColorKey for any service requests.
Warning! To avoid electrical shock, be sure to disconnect power before any service or when
moving or setting up the fixture.
Caution! Avoid direct eye exposure with the fixture when on.
•
This fixture is for indoor use only.
•
This fixture must be installed a minimum distance of 5 meters (16’4”) away from any
lighted objects.
•
Do not install or operate this fixture near flammable materials.
•
This device must be installed, operated, and maintained by a qualified professional.
•
Do not touch the fixture with bare hands during operation as the surface temperature of
the fixture can exceed 60˚C (140˚F). Turn off power and wait 15 minutes for the fixture to
cool before attempting to touch it.
•
Please check if the voltage is in accordance with the rated power before installing.
•
Do not operate this fixture if the power cord has been damaged. Turn off fixture and
replace with a power cord of similar rating.
1
Display Operation
Ø MENU: Access the menu/Scroll through menu options
Ø ENTER: Open/Select the current menu option
Ø UP: Scroll through menu selection or parameter increase
Ø DOWN: Scroll through menu selection or parameters decrease
2
DMX Values
5 Channel mode
Channel
Value
Function
1
0-255
Pan
2
0-255
Tilt
Dimming and Strobe
3
0-7
No effect
8-134
Dimming
135-239
Strobe from slow to fast
240-255
Open
Color Selection
4
5
0-7
Color combination 1
8-21
Color combination 2
22-34
Color combination 3
35-49
Color combination 4
50-63
Color combination 5
64-77
Color combination 6
78-91
Color combination 7
92-105
Color combination 8
106-119
Color combination 9
120-133
Color combination 10
134-147
Color combination 11
148-161
Color combination 12
162-175
Color combination 13
176-189
Color combination 14
190-203
Color combination 15
204-217
Color combination 16
218-231
Color combination 17
232-255
Color slipping change
0-255
Retention
13 Channel mode
Channel
Value
Function
1
0-255
Pan
2
0-255
Pan fine-tuning
3
0-255
Tilt
4
0-255
Tilt fine-tuning
5
0-255
Speed
6
0-7
No effect
8-134
Dimming
135-239
Strobe from slow to fast
240-255
Open
3
7
0-255
Red dimming
8
0-255
Green dimming
9
0-255
Blue dimming
10
0-255
White dimming
Color selection
11
12
0-7
Color combination 1
8-21
Color combination 2
22-34
Color combination 3
35-49
Color combination 4
50-63
Color combination 5
64-77
Color combination 6
78-91
Color combination 7
92-105
Color combination 8
106-119
Color combination 9
120-134
Color combination 10
135-147
Color combination 11
148-161
Color combination 12
162-175
Color combination 13
176-189
Color combination 14
190-203
Color combination 15
204-217
Color combination 16
218-231
Color combination 17
232-255
Color transitions
0-255
Color speed
13
Auto & Sound Active
0-7
Blank
8-22
Auto 1
23-37
Auto 2
38-53
Auto 3
54-67
Auto 4
68-82
Auto 5
83-97
Auto 6
98-112
Auto 7
113-127
Auto 8
128-142
Sound 1
143-157
Sound 2
158-172
Sound 3
173-187
Sound 4
188-202
Sound 5
203-217
Sound 6
218-232
Sound 7
233-255
Sound 8
4
Menu Guide
d001
001-512
Console control
MAFA
FASt
Master mode fast AUTO
MStS
Master mode voice active
MStc
Stand-alone mode
SlAu
。。
Slave mode setting
MASL-SLOU
Master mode slow AUTO
PAn
TiL
diS
13CH
PA54
Ti27
REST
LOAD
PAn
X-Motor Forward running
rPAn
X-motor Backward running
TiL
Y motor Forward running
rTiL
Y motor Backward running
diS
Forward display
rdiS
Backward display
13CH
13-channel mode
5CH
5-channel mode
PA54
X Motor 540-degree running
PA36
PA543
PA18
6
PA543
Ti27
6
2727
Ti18
PA543
Ti09
6
PA543
REST
6
LOAD
X motor 360 degree running
X Motor 180-degree running
Y motor 270 degree running
X Motor 180-degree running
X motor 90 degree running
Reset
Initialization parameters
5
DMX Connections
Ø DMX Cable:
The Mover MiniWash QUAD-W 7 can be controlled via DMX using a 3-pin XLR
connection. The standard DMX connection is XLR is: one end connects to the male plug,
and the other connects to the female. As below: pin 1: ground, pin 2: negative signal, pin 3:
positive signal
Noted:In order to avoid failures and interference signal transmission,we connect a
resistance120Ω ( 1/4W ) at
the
end
of
the
DMX
connecting
as
below:
Ø The Conversion between 3 pin and 5 pin XLR
If the output cable of DMX512 controller is the 5PIN, please use 1pc 5PIN to 3PIN cable
6
Master/Slave Mode Operation
Master/Slave
Master/Slave mode allows you to connect multiple units together using one (1) unit to control
others in a chain. When a fixture is set to ‘Master Mode,’ this unit will always act as a
controlling unit until it is switched out of ‘Master Mode’. The Master unit will send out signal
via DMX to Slave units which will react in synchronization. When a fixture is set into ‘Slave
Mode’, this fixture will receive the Master signal. To avoid master signal and DMX signal
interference, do not connect DMX when using Master/Slave mode. If using a DMX run
longer than 60 meters and/or over 32 units, a signal amplifier may be required.
Troubleshooting
Problem
Solutions
u Make sure that the DMX cable is properly connected
No DMX control
u Make sure that the DMX controller is operational
u Check the DMX cable for tears or breaks
u Make sure that the fixture is in DMX mode
Fixture does not
respond to sound
u Make sure that the fixture is in Sound Active mode.
7
Technical Information
Power supply: AC110V-240V; 50-60HZ
Power consumption: 80W
Light source: 7x 4-in-1 LED’s (RGBW)
Life span: up to100,000 hours
Beam angle: 25°
Channel: 5ch/13ch
Control: Auto, Sound active, DMX512, Master/slave
Pulse frequency: 0-10HZ
Dimming: 0-100%
Pan: 540˚
Tilt: 270˚
IP rate: IP20
Notice to consumer: ColorKey offers a 1-year limited warranty. Please visit our website at
www.ColorKeyLED.com to register your product.
Please note: As we continue to work towards improving our products and your experience
as a user, we recommend that you check our website periodically for updates to user
manuals and specifications at www.ColorKeyLED.com or you may contact us directly at
info@colorkeyled.com.
8
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising