Pen-Ray Light Sources

Pen-Ray Light Sources
Accessories
Pe n - R a y L i g h t S o u r c e s
PEN-RAYÒ LIGHT SOURCES
Vi
46
Or
(5
Rare Gas Lamps
Pen-Ray light sources are low-pressure, cold cathode
mercury UV lamps made of double bore quartz tubing.
The lamps are individually created by master craftsmen
to ensure quality and reliability. The lamps provide a high
degree of stable, isolated spectral line accuracy and long
life (3000+ hours).
A variety of lighted lengths and wavelengths are available
Lamp uses include:
Call UVP for
Sterilization
additional models
Fluorescent inspections
and custom
Photochemical reactions
designs
Interferometry
Chromatography
Photometric and fluorometric instruments
Spectroscopic wavelength calibration
Monochromatic sources for optical systems
and reference studies
Ordering Information - Standard Light Sources
11SC-1 254nm UV
Lighted Length/Dia:
Volts -Start/Operate:
90-0012-01
2.12/0.256 in. (53.8/6.5mm)
800V/270V
11SC-1L 365nm UV
Lighted Length/Dia:
Volts - Start/Operate:
90-0019-01
2.25/0.375 in. (57.2/9.5mm)
800V/270V
11SC-2 254nm UV
Lighted Length/Dia:
Volts: Start/Operate:
90-0020-01
0.75/0.256 in. (19.1/6.5mm)
800V/270V
3SC-9 254nm UV
Lighted Length/Dia:
Volts: Start/Operate:
90-0004-01
9.0/0.375 in. (228.6/9.0mm)
640V/56V
Select Pen-Ray
Lamps are
available with a
choice of lighted
length and
diameter,
phosphor and
handle.
Lamp cord length: 16 in. (406mm) with standard connector;
different cable lengths and connectors are available.
Power supplies: provide optimum starting and operation of
the lamps. Use the recommended power supplies (ordered
separately) shown with each lamp.
Filter shields (optional): direct or modify the emission
output for model 11SC-1:
Shield A provides a 0.04 in. ID hole
Shield B has 0.31 x 0.63 in. window
Shield C has a 0.19 x 1.5 in. window
Lamp Spectra
The graph below illustrates the relative emission intensities
of the mercury Pen-Ray lamps.
Di
VB
Spectral charts
and lamp
specifications
can be obtained
from UVP.
VB
W
O
V
R
R
Ordering Information - Power Supply
Power Supply
Open Circ. Voltage: 2300 VAC
Max. Pri./Lamp Current:
400 ma/18 ma (avg)
V
c
V
99-0055-01 (115V/60Hz)
99-0055-02 (220V/50Hz)
R
R
* Power supply is ordered separately.
Ordering Information
Rare Gas Lamps
Rare gas lamps incorporate the Pen-Ray
model 11SC-1 body but replace the Mercury
for other reactive ingredients. Ask about gas
combinations and custom designs.
Rare Gas Lamp are available with Argon,
Krypton, Neon or Xenon fills.
Argon Fill
Krypton Fill
Neon Fill
Power Supply
90-0013-01
90-0014-01
90-0015-01
99-0057-01 (115V)
99-0057-02 (230V)
Neon-Mercury
Power Supply
90-0016-01
99-0055-01 (115V)
99-0055-02 (230V)
Xenon Fill
Power Supply
90-0017-01
99-0056-01 (115V)
99-0056-02 (230V)
UV
1 Laser Components S.A.S.
France
45 bis Route des Gardes
92190 Meudon
Tel: +33 1 39 59 52 25
Fax:+33 1 39 59 53 50
info@lasercomponents.fr
www.lasercomponents.fr
Accessories
Zinc and Cadmium Lamps
Ordering Information
Use Power supply: 99-0033-01 (115V) or
99-0033-02 (230V)
Zinc Lamps
Radial lead 8 in. (203mm)
Axial lead 8 in. (203mm)
Radial lead 12 in. (305mm)
90-0069-05
90-0069-06
90-0069-07
Cadmium Lamps
Radial lead 8 in. (203mm)
Axial lead 8 in. (203mm)
Radial lead 12 in. (305mm)
90-0071-03
90-0071-06
90-0071-07
Dimensions:
Transilluminator
m filter. The hinged
different angles for
Zinc Lamp: 20mm lighted length, 4.33 in. (110mm)
total length, 0.67 in. (17mm) quartz dia.
Pen-Ray
Field
Packs
provide a
portable
UV light
source.
Cadmium Lamp: 24mm lighted length, 4.33 in.
110mm) total length, 0.67 in. (17mm) quartz dia.
Pen-Ray Fields Packs
34-0073-01
34-0072-01
34-0060-01
Pen-Ray Field Packs combine a light source and a DC power supply
(with 9V battery) in a compact, portable package.
Lightweight and small enough to fit in a pocket
Field Pack FP-LSD provides two interchangeable light
sources (365nm and 254nm)
0423-01 (100-115V)
0423-02 (230V)
Stable Ozone Generators
0190-02
0422-01 (100-115V)
0422-02 (230V)
Stable Ozone Generators (SOG) use the photochemical reaction of
oxygen and shortwave (185nm) UV to produce a continuous flow of
ozone.
0190-09
0424-01 (100-115V)
0424-02 (230V)
SOG models use a removable Pen-Ray lamp inserted into the
generator box
0190-11
The power supply included with the lamp feeds stable power to
the lamps for uniform ozone generation
0421-01 (100-115V)
0421-02 (230V)
Ozone generators provide a stable source for water
purification, oxidant testing and air pollution studies
0190-04
0420-01 (100-115V)
0420-02 (230V)
Ordering Information and Specifications
0190-10
SOG-1
0427-01 (100-115V)
0427-02 (230V)
Ozone Production:
Lighted Length:
0190-02
SOG-2
0428-01 (100-115V)
0428-02 (230V)
Ozone Production:
Lighted Length:
0190-09
97-0066-01 (115V)
97-0066-02 (220V)
0.8 ppm @ 0.5 L/min.
2.12 in. (53.8mm)
Pen-Ray Light Sour ces
Zinc and cadmium lamps are designed for use
with UV absorption cells and detectors and are
often used in air pollution monitoring devices.
Zinc lamps can substitute for deuterium lamps
due to the zinc lamps’ superior thermal stability,
long life and prominent 214nm energy peak.
Electrical leads are available in either side/radial
or end/axial configurations.
Field Pack Ordering Information
Lighted Length:
Total Length:
Quartz/Handle Dia:
Power supply:
1.75 in. (44.5mm)
4.25 in. (108mm)
0.375 in. (9.5mm)
3.75L x 2.38W x 1H in.
(95.25 x 60.45 x 25.4mm)
FP-L 365nm phosphor jacket
95-0256-01
FP-S 254nm
95-0256-02
FP-LSD 365nm phosphor
jacket, 254nm
95-0256-03
Stable Ozone
Generators for
calibration of
ozone analyzers.
Housing
dimensions:
11L x 3.75W x 1.8H
in. (279 x 95.25 x
45.7mm)
97-0067-01 (115V)
97-0067-02 (220V)
3.0 ppm @ 1.0 L/min.
9 in. (228.6mm)
0429-01 (100-115V)
0429-02 (230V)
0190-11
Specialty/OEM Light Sources
10/11 / V1 / HW / uvp/pen-ray_light_sources.indd
0430-01 (100-115V)
0430-02 (230V)
UVP manufactures a wide range of custom light
sources to meet specialty custom and OEM lamp
specifications. Additional designs include grid lamps,
photochemical quartz, miniature calibration lamps and
coil lamps. Contact UVP for additional information.
0190-04
UV Transilluminators:
7 x 486 x 143mm)
er.
2 Laser Components S.A.S.
France
45 bis Route des Gardes
92190 Meudon
Tel: +33 1 39 59 52 25
Fax:+33 1 39 59 53 50
info@lasercomponents.fr
www.lasercomponents.fr
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising