User manual | Operating Instructions Blu-ray Disc Home

Operating Instructions Blu-ray Disc Home
SC-BTT750_350P_VQT2W18_eng.book
5 ページ 2010年6月21日 月曜日 午後4時51分
Operating Instructions
Blu-ray Disc Home Theater Sound System
Model No. SC-BTT750
SC-BTT350
The illustration shows the image of the unit SC-BTT750.
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Before connecting, operating or adjusting this product, please read the instructions completely.
Please keep this manual for future reference.
≥ The Wi-Fi CERTIFIED Logo is for SC-BTT750.
[BTT350]
If you have any questions contact:
1-800-211-PANA(7262)
®
As an ENERGY STAR Partner,
Panasonic has determined that
®
this product meets the ENERGY STAR
guidelines for energy efficiency.
The warranty can be found on page 51.
VQT2W18
P
until
2010/07/13
SC-BTT750_350P_VQT2W18_eng.book
2 ページ 2010年6月21日 月曜日 午後4時51分
Getting started
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE
OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR PRODUCT DAMAGE,
≥ DO NOT EXPOSE THIS APPARATUS TO RAIN,
MOISTURE, DRIPPING OR SPLASHING AND
THAT NO OBJECTS FILLED WITH LIQUIDS,
SUCH AS VASES, SHALL BE PLACED ON THE
APPARATUS.
≥ USE ONLY THE RECOMMENDED
ACCESSORIES.
≥ DO NOT REMOVE THE COVER (OR BACK);
THERE ARE NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
-If you see this symbolInformation on Disposal in other Countries outside the
European Union
This symbol is only valid in the European
Union.
If you wish to discard this product, please
contact your local authorities or dealer and
ask for the correct method of disposal.
User memo:
DATE OF PURCHASE _________________________
DEALER NAME ______________________________
DEALER ADDRESS ___________________________
____________________________________________
TELEPHONE NUMBER ________________________
The model number and serial number of this product can be
found on either the back or the bottom of the unit.
Please note them in the space provided below and keep for
future reference.
MODEL NUMBER _____________________________
FCC Note:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
≥ Reorient or relocate the receiving antenna.
≥ Increase the separation between the equipment and receiver.
≥ Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
≥ Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:To assure continued compliance, follow the attached
installation instructions and use only shielded interface cables when
connecting to peripheral devices. Any changes or modifications not
expressly approved by the party responsible for compliance could void
the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way
Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Electronics Company
Telephone No.: 1-800-211-PANA (7262)
VQT2W18
2
SERIAL NUMBER _____________________________
SC-BTT750_350P_VQT2W18_eng.book
3 ページ 2010年6月21日 月曜日 午後4時51分
IMPORTANT SAFETY
INSTRUCTIONS
Read these operating instructions carefully before using the
unit. Follow the safety instructions on the unit and the
applicable safety instructions listed below. Keep these
operating instructions handy for future reference.
1
2
3
4
5
6
7
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8 Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9 Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other.
A grounding-type plug has two blades and a third
grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of
the obsolete outlet.
10 Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11 Only use attachments/accessories specified by the
manufacturer.
12 Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13 Unplug this apparatus during lightning storms or when
unused for long periods of time.
14 Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be
of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
(Inside of product)
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A
BOOKCASE, BUILT-IN CABINET OR IN ANOTHER
CONFINED SPACE. ENSURE THE UNIT IS WELL
VENTILATED. TO PREVENT RISK OF ELECTRIC
SHOCK OR FIRE HAZARD DUE TO OVERHEATING,
ENSURE THAT CURTAINS AND ANY OTHER
MATERIALS DO NOT OBSTRUCT THE VENTILATION
VENTS.
VQT2W18
3
SC-BTT750_350P_VQT2W18_eng.book
4 ページ 2010年6月21日 月曜日 午後4時51分
Table of contents
IMPORTANT SAFETY INSTRUCTIONS .......... 3
Getting started
TV
Accessory.......................................................... 5
Control reference guide..................................... 6
Enjoying TV with unit’s speakers.................... 29
•Remote control ................................................................. 6
•Main unit (Front) ............................................................... 7
•POWER-SAVING FEATURES ....................................... 7
•Main unit (Rear)................................................................ 7
Playable discs/Cards......................................... 8
Unit and media care .......................................... 9
Using the remote control ................................... 9
STEP 1 : Preparing the speakers.................... 10
•Setting the audio link ..................................................... 30
•Easy control only with VIERA remote control ................ 31
Other devices
Using the iPod/iPhone ..................................... 32
STEP 2 : Positioning ....................................... 12
STEP 3: Connections...................................... 13
•iPod/iPhone Connection ................................................ 32
•iPod/iPhone Playback.................................................... 32
Advanced operations
STEP 4: AC power supply cord connection .... 18
STEP 5: Easy setup ........................................ 18
Enjoying VIERA CASTTM ................................. 33
Playback menu ................................................ 34
Setup menu ..................................................... 36
•Network Easy Setting ..................................................... 19
•Firmware updates........................................................... 20
•Speaker settings ............................................................. 40
STEP 6:
Reprogramming the remote control ................ 21
Optional speaker settings
Inserting or removing media............................ 21
START menu .................................................. 22
Speaker installation option .............................. 41
Enjoying sound effects from all speakers....... 23
•Enjoying surround sound effects .................................... 23
Playback
Playing video contents .................................... 24
•Other operations during play .......................................... 24
•Useful functions.............................................................. 25
•Enjoying BD-Live or BONUSVIEW in BD-Video ............ 25
Enjoying 3D video ............................................ 26
•3D settings ..................................................................... 26
Playing still pictures......................................... 27
•Useful functions.............................................................. 27
Playing music .................................................. 28
Radio
Listening to the Radio ..................................... 28
•Presetting stations automatically.................................... 28
•Presetting stations manually .......................................... 28
•Listening/confirming the preset channels ....................... 29
4
Linked operations with the TV
(VIERA LinkTM “HDAVI ControlTM”)................... 30
•Assembling the speakers [BTT750].................................. 10
•Preparing cables and making connection ...................... 11
•Speaker cable connection .............................................. 13
•Radio antenna connection ............................................. 13
•Connection to a TV ........................................................ 14
•Connection with Set Top Box, etc. .................................. 15
•Connection to a broadband network .............................. 16
VQT2W18
•Surround sound effects.................................................. 29
•Sound modes................................................................. 29
•Selecting the type of audio from
the DIGITAL AUDIO IN terminal................................... 29
Reference
Troubleshooting guide ..................................... 42
Messages ........................................................ 44
About MP3/JPEG/AVCHD/MPEG2 files.......... 45
Supplemental information................................ 46
Glossary .......................................................... 47
Specifications .................................................. 48
Limited Warranty ............................................. 51
Index.................................................. Back cover
5 ページ 2010年6月21日 月曜日 午後4時51分
≥ These operating instructions are applicable to models
SC-BTT750 and SC-BTT350. Unless otherwise
indicated, illustrations in these operating instructions
are of SC-BTT750.
≥ Operations in these instructions are described mainly
with the remote control, but you can perform the
operations on the main unit if the controls are the same.
Indicates features applicable to:
[BTT750]: SC-BTT750 only
[BTT350]: SC-BTT350 only
System
Main unit
Speaker system
SC-BTT750
SA-BTT750
SB-HF730
SB-HC730
SB-HS230
SB-HW330
Front speakers
Center speaker
Surround speakers
Subwoofer
Getting started
Getting started
SC-BTT350
SA-BTT350
SB-HF230
SB-HC480
SB-HS230
SB-HW480
Playback
SC-BTT750_350P_VQT2W18_eng.book
≥ Some accessories and external devices mentioned in these operating instructions that are not included with this
product may not be on sale in certain regions.
Accessory
[BTT750]
∏ 2 Speaker stands
(with cable)
∏ 2 Bases
(RYK1610-K1)
[RYK1609-K]
with white connector
[RYK1609A-K]
with red connector
∏ 1 Sheet of speaker
cable stickers
∏ 4 Screws
(XTN5+10FFJK)
∏ 2 Screws
(XYN5+J18FJK)
∏ 1 Wireless LAN
Adaptor (DY-WL10*)
(C5ZZZ0000048)
∏ 1 USB extension cable
(DY-WL10*)
(K2KYYYY00064)
TV
∏ 1 AC power supply
cord
(K2CB2CB00021)
* DY-WL10 includes Wireless LAN Adaptor and USB
extension cable, and it is sold in the market.
[BTT350]
∏ Speaker cables
[REEX1152A-1] with red connector
[REEX1153A-1] with white connector
≥ Product numbers correct as of June 2010. These may be subject to change.
≥ Do not use AC power supply cord with other equipment.
≥ To order accessories, refer to “Accessory Purchases (United States and
Puerto Rico)” on page 51.
Other devices
[REEX1154-1] with green connector
[REEX1155-1] with gray connector
[REEX1156-1] with blue connector
∏ 1 FM indoor antenna
(RSAX0002)
Advanced operations
∏ Speaker cables
∏ 1 Video cable
(K2KA2BA00001)
Optional speaker
settings
∏ 2 Batteries for remote
control
Reference
∏ 1 Remote control
(N2QAKB000089)
Radio
Check the supplied accessories before using this unit.
[BTT750]
≥ Do not use Wireless LAN Adaptor with other equipment. Wireless LAN
Adaptor is not designed to use with PC.
≥ MAC address is stated on the bottom of Wireless LAN Adaptor.
VQT2W18
5
SC-BTT750_350P_VQT2W18_eng.book
6 ページ 2010年6月21日 月曜日 午後4時51分
Control reference guide
1
2
3
iPod
BD/SD
4
SEARCH
1
2
3
VOL
INPUT
1@. 2ABC 3DEF
4GHI 5JKL 6MNO
P
7QRS
8TUV 9WXYZ
CANCEL
0 _,
VOL
MUTE
RADIO
EXT-IN
PLAY
SEARCH
PAUSE
SKIP
14
15
6
SKIP
17
EN
10
11
12
M EN U
9
U
P
OK
s
20
21
G
B
SOUND SURROUND DISPLAY
-CH SELECT
19
11
12
13
RETURN
SUB MENU
R
9
10
18
-UP
8
START
EXIT
OP
DIRECT
NAV
TOP M IGAT
OR
7
STOP
STATUS
4
5
6
7
8
16
SLOW
5
Remote control
13
TV
-SLEEP
Y
AUDIO
14
15
22
23
16
17
18
19
20
21
22
23
Turn the unit on and off (> 18)
Display the Home screen of VIERA CAST (> 33)
Select title numbers, etc./Enter numbers or characters
(> 33)
[CANCEL]: Cancel
Basic playback control buttons (> 24)
Select preset radio stations
Show status messages (> 24)
Show Top Menu/DIRECT NAVIGATOR (> 24)
[3, 4, 2, 1]: Menu selection
[OK]: Selection
[2, 1]: Select preset radio station (> 29)
[2] (2;), [1] (;1): Frame-by-frame (> 24)
Show sub menu (> 25)
These buttons are used when;
≥ Operating a BD-Video disc that includes JavaTM
applications (BD-J).
≥ Displaying “Title View” and “Album View” screens.
(> 27)
≥ Operating contents of VIERA CAST (> 33)
Set the sound mode (> 23)/Select speaker channel
(> 23)
Select surround sound effects (> 23)
TV operation buttons
[Í]: Turn the television on and off
[INPUT]: Switch the input select
[i j VOL]: Adjust the volume
Adjust the volume of the main unit
Mute the sound
≥ “MUTE” flashes on the unit’s display, while the function is
on.
≥ To cancel, press the button again or adjust the volume.
≥ Muting is canceled if the unit is turned off.
Select the source
[BD/SD]: Select disc drive or SD card drive (> 22)
[iPod]: Select iPod/iPhone as the source (> 22, 32)
[RADIO/EXT-IN]: Select FM tuner or external audio as the
source (> 22, 28, 29)
Select radio stations manually (> 28)
Exit the menu screen
Show START menu (> 22)
Show Pop-up menu (> 24)
Return to previous screen
Select audio (> 24)
Show Playback menu (> 34)/Set the sleep timer
1 Press and hold [–SLEEP].
2 While “SLEEP ££” is displayed, press [–SLEEP]
several times to select the time (in minutes).
≥ Timer selection is up to 120 minutes.
≥ Select “OFF” when canceling the setting.
≥ To confirm the remaining time
Press and hold the button again.
VQT2W18
6
SC-BTT750_350P_VQT2W18_eng.book
7 ページ 2010年6月21日 月曜日 午後4時51分
1 2
4
3
POWER
Getting started
Main unit (Front)
5
VOLUME
OPEN/CLOSE
iPod
Pull open.
SD CARD
6
1
2
3
4
5
6
SELECTOR
7
8
Standby/on switch (POWER Í/I) (> 18)
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a small
amount of power.
Power indicator
The indicator lights when this unit is turned on.
Connect iPod/iPhone (> 32)
Adjust the volume of the main unit
Open or close the disc tray (> 21)
Disc tray
9 10
11 12
7
8
SD card slot (> 21)
Display (FL display)
≥ “SRD” (SURROUND) lights when sound is output to the
surround speakers.
9 Remote control signal sensor
Distance: Within approx. 7 m (23 ft.)
Angle: Approx. 20o up and down, 30o left and right
10 Select the source (> 22)
11 Stop (> 24)
12 Start play (> 24)
POWER-SAVING FEATURES
The main unit is designed to conserve its power consumption and save energy.
e.g.
jThere is no audio signal from an external device.
jDisc playback is stopped/paused.
jiPod/iPhone playback is stopped/paused.
jThe disc menu is displayed and play is not selected.
(This function may not work depending on the application
type of discs.)
≥ Automatic FL display turn-off function
The main unit's display is automatically turned off when the
volume is adjusted to “0”. (> 37)
≥ Automatic power-down function
The main unit will automatically switch to standby mode after
30 minutes if the main unit is inactive as follows.
∫ If the front cover comes off
1 Hold rear side of main unit by one hand and match up left
or right side protruding hook on the cover first with the
corresponding slot on the unit.
2 Push the hook firmly towards the unit until it clicks into
place. Then push the succeeding hooks one by one until
all have clicked into place.
3 Check that the cover now moves correctly.
≥ If it does not, remove it and repeat the above procedure.
Main unit (Rear)
1
2
3
4
5
6
7 8 9
AUX
AC IN
+
SPEAKERS
LAN
6
5
2
1
4
R
(STB/TV)
VIDEO
OUT
OPTICAL
DIGITAL TRANSMITTER
5V
500mA
3
R3 L
R3 L
6
6
SUBWOOFER CENTER FRONT SURROUND
1
2
3
4
5
6
DC OUT
11
FM ANT (75 ) DIGITAL AUDIO IN
L
AV
OUT
10
AC IN terminal (> 18)
Speaker terminals (> 13)
Cooling fan
HDMI AV OUT terminal (> 15)
LAN port (> 16)
[BTT750] USB port for supplied wireless adaptor (> 16)
[BTT350] USB port for optional wireless adaptor (> 16)
WIRELESS
LAN
(ARC)
7
8
9
AUX terminal (> 14)
VIDEO OUT terminal (> 14)
FM radio antenna terminal (> 13)
10 DIGITAL AUDIO IN terminal (> 14 , 15)
11 Digital transmitter dock for optional wireless system (> 12)
VQT2W18
7
SC-BTT750_350P_VQT2W18_eng.book
8 ページ 2010年6月21日 月曜日 午後4時51分
Playable discs/Cards
Type
Logo examples
Type detail
[BD]
Playable contents*
BD-Video
Video
BD-RE
Video
JPEG
BD-R
Video
DVD-Video
Video
DVD-RAM
Video
AVCHD
JPEG
DVD-R
[DVD]
Video
AVCHD
MP3
JPEG
DVD-R DL
DVD-RW
—
Video
AVCHD
+R/+RW/+R DL
Music CD
Music [CD-DA]
CD-R
CD-RW
Music [CD-DA]
MP3
JPEG
[CD]
—
[SD]
SD Memory Card (8 MB to 2 GB)
SDHC Memory Card (4 GB to 32 GB)
MPEG2
SDXC Memory Card (48 GB, 64 GB)
AVCHD
(Compatible with both mini and micro types)
JPEG
(as of December 2009)
* See page 8–9, 45–46 for more information on the types of content that can be played.
∫ Discs that cannot be played in this unit
∫ Region management information
Any other disc that is not specifically supported or
previously described.
BD-Video
This unit plays BD-Video marked with labels containing the
region code A.
Example:
≥ 2.6 GB and 5.2 GB DVD-RAM
≥ DVD-RAM that cannot be removed from cartridge
≥ Super Audio CD
≥ Photo CD
≥ DVD-Audio
≥ Video CD and Super Video CD
≥ WMA discs
≥ DivX discs
≥ PAL discs
≥ HD DVD
≥ BD-Video discs recorded at a rate of 50 fields/sec
DVD-Video
This unit plays DVD-Video marked with labels containing the
region number “1” or “ALL”.
Example:
1
VQT2W18
8
ALL
1
2
4
9 ページ 2010年6月21日 月曜日 午後4時51分
∫ Finalize
∫ SD card
DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW recorded by
a recorder, etc. needs to be finalized by the recorder to play on
this unit. Please refer to the recorder’s instructions.
≥ MiniSD Cards, microSD Cards, microSDHC
Cards and microSDXC Cards can be used, but
must be used with an adaptor card. These are
usually supplied with such cards, or otherwise
customer provided.
≥ Keep the Memory Card out of reach of children
to prevent swallowing.
≥ To protect the card’s contents, move the record prevention
tab (on the SD card) to “LOCK”.
≥ This unit is compatible with SD Memory Cards that meet SD
Card Specifications FAT12 and FAT16 formats, as well as
SDHC Memory Cards in FAT32 format (Does not support
long file name.) and SDXC Memory Cards in exFAT.
≥ If the SD card is used with incompatible computers or
devices, recorded contents may be erased due to the card
being formatted etc.
≥ Useable memory may be slightly less than the card capacity.
∫ BD-Video
≥ 3D videos can be played back when this unit is connected to
a 3D compatible TV using a High Speed HDMI Cable.
≥ This unit supports high bit rate audio (Dolby Digital Plus,
Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD
Master Audio) adopted in BD-Video. In order to enjoy these
audio formats, refer to page 37.
∫ Music CD
≥ Operation and sound quality of CDs that do not conform to
CD-DA specifications (copy control CDs, etc.) cannot be
guaranteed.
≥ The digital audio content side of a DualDisc does not meet
the technical specifications of the Compact Disc Digital
Audio (CD-DA) format so playback may not be possible.
Unit and media care
∫ Clean this unit with a soft, dry cloth.
≥ Never use alcohol, paint thinner or benzine to clean this unit.
≥ Before using chemically treated cloth, carefully read the
instructions that came with the cloth.
Getting started
SC-BTT750_350P_VQT2W18_eng.book
≥ It may not be possible to play the above media in some cases due to the
type of media, the condition of the recording, the recording method and
how the files were created.
≥ The producers of the disc can control how discs are played. So you may
not always be able to control play as described in these operating
instructions. Read the disc’s instructions carefully.
Using the remote
control
Insert so the poles (+ and –) match those in the remote control.

∫ Clean the lens with the lens cleaner disc.
Lens cleaner disc: RP-CL720PP (not supplied)
≥ This lens cleaner is sold as specific for DIGA, but can be
used on this unit as well.

R6/LR6, AA
∫ Clean discs
DO
(Alkaline or manganese batteries)
DO NOT
Point it at the remote control signal sensor on this unit (> 7).
Wipe with a damp cloth and then wipe dry.
∫ Disc and card handling precautions
≥ Handle discs by the edges to avoid inadvertent scratches or
fingerprints on the disc.
≥ Do not attach labels or stickers to discs.
≥ Do not use record cleaning sprays, benzine, thinner, static
electricity prevention liquids or any other solvent.
≥ Clean any dust, water, or foreign matter from the terminals
on the rear side of the card.
≥ Do not use the following discs:
jDiscs with exposed adhesive from removed stickers or
labels (rented discs etc).
jDiscs that are badly warped or cracked.
jIrregularly shaped discs, such as heart shapes.
Mishandling of batteries can cause electrolyte leakage which can damage
items the fluid contacts and may cause a fire.
≥ Do not mix old and new batteries or different types at the same time.
≥ Do not heat or expose to flame.
≥ Do not leave the battery(ies) in an automobile exposed to direct sunlight for
a long period of time with doors and windows closed.
≥ Do not take apart or short circuit.
≥ Do not attempt to recharge alkaline or manganese batteries.
≥ Do not use batteries if the covering has been peeled off.
Remove batteries if the remote control is not going to be used for a long
period of time. Store in a cool, dark place.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the
manufacturer. Dispose of used batteries according to the manufacturer’s
instructions.
∫ To dispose or transfer this unit
The unit may keep the user settings information in the unit. If
you discard this unit either by disposal or transfer, then follow
the procedure to return all the settings to the factory presets to
delete the user settings. (> 42, “To return all settings to the
factory preset”)
≥ The operation history may be recorded in the memory of this
unit.
VQT2W18
9
SC-BTT750_350P_VQT2W18_eng.book
10 ページ 2010年6月21日 月曜日 午後4時51分
STEP 1 : Preparing the speakers
Assembling the speakers [BTT750]
Caution
≥ Do not stand on the base. Be cautious when children are
near.
≥ When carrying speakers, hold the stand and base parts.
2 Front speakers
2 Stands (with cables)
Preparation
≥ To prevent damage or scratches, lay down a soft cloth and
perform assembly on it.
≥ For wall mount, refer to page 41.
≥ Keep the screws out of reach of children to prevent
swallowing.
2 Bases
4 Screws A
A
1
Back of the base
2 Screws B
B
Pull the cable
straight along
the line and
slide into the
groove.
Screw A
2
Tighten
securely.
Insert the wire fully.
r: White
s: Blue line
Push!
Screw B
Press into the groove.
2
1
Tighten securely.
Leave about 80 mm (3 5/32q)
∫ Preventing the speakers from falling
≥Consult a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that
may not have strong enough support. Improper attachment may result in damage to the wall or speakers.
≥Use a string of less than ‰ 2.0 mm (3/32q), which is capable of supporting over 10 kg (22 lbs).
A String (not supplied)
Thread from the wall to the speaker and tie tightly.
B Rear of the speaker
C Screw eye (not supplied)
D Wall
E Approx.150 mm (5 29/32q)



VQT2W18
10


SC-BTT750_350P_VQT2W18_eng.book
11 ページ 2010年6月21日 月曜日 午後4時51分
1
Use of the speaker cable stickers is
convenient when making cable connections.
e.g. Front speaker (L)
2
Connecting the speaker cables. Insert the wire fully,
taking care not to insert beyond the wire insulation.
e.g. Surround speaker
Getting started
Preparing cables and making connection
FRONT
Lch


r: White
s: Blue line

A Speaker cable sticker (supplied)
B Connector
Speaker cable sticker
Color
1 FRONT (L)
WHITE
2 FRONT (R)
RED
3 SURROUND (L)
BLUE
4 SURROUND (R)
GRAY
5 CENTER
GREEN
6 SUBWOOFER
PURPLE
Be sure to match the number on each sticker with the
connector color.
Push!
≥ Be careful not to cross (short-circuit) or reverse the polarity of the
speaker wires as doing so may damage the speakers.
≥ Don’t use a front speaker as a surround speaker or vice versa. Verify
the type of speaker with the label on the rear of the speaker before
connecting the appropriate cable.
≥ To avoid injury by falling or dropping the speaker, place the speaker cables
with care not to stumble or hook.
≥ Do not hold the speaker in one hand to avoid injury by dropping the
speaker when carrying.
VQT2W18
11
SC-BTT750_350P_VQT2W18_eng.book
12 ページ 2010年6月21日 月曜日 午後4時51分
STEP 2 : Positioning
Caution
≥ The main unit and supplied speakers are to be used only as indicated in this setup. Failure to do so may
lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified
service person if damage has occurred or if you experience a sudden change in performance.
≥ Do not attempt to attach these speakers to walls using methods other than those described in this
manual.
≥ Do not touch the front netted area of the speakers. Hold by the sides.
How you set up your speakers can affect the bass and the sound field.
Setup example
Place the front, center and surround speakers at
approximately the same distance from the seating position.
The angles in the diagram are approximate.
≥ Keep your speakers at least 10 mm (13/32z) away from the system for
proper ventilation.



60°


A Center speaker
≥ Put on a rack or shelf not to interfere with the TV's
various sensors (ambient light, etc.). Vibration caused by
the speaker can disrupt the picture if it is placed directly
on the TV.
B Front speakers
C Subwoofer
D Surround speakers
≥ Place the speakers at the same height or higher than ear
level.
You can enjoy surround speaker
sound wirelessly when you use the
optional Panasonic wireless
accessory (SH-FX71).
For more details, refer to the operating
instructions for the optional wireless
system.
VQT2W18
12
≥ Use only supplied speakers
Using other speakers can damage the unit, and sound quality will be
negatively affected.
≥ You can damage your speakers and shorten their useful life if you play
sound at high levels over extended periods.
≥ Positioning speakers in front
It is possible to locate all the speakers in front of the listening position.
However, the optimal surround sound effect may not be obtainable.
≥ Place speakers on flat secure bases.
≥ Placing speakers too close to floors, walls, and corners can result in
excessive bass. Cover walls and windows with thick curtains.
≥ For optional wall mount, refer to page 41.
∫ If irregular coloring occurs on your TV, turn
the TV off for about 30 minutes.
If it persists, move the speakers further away from the TV.
∫ Upgrade your system to 7.1-channel
system
120°

The main unit is designed to enjoy the 7.1ch surround sound. By
connecting 2 units of the Panasonic wireless system SH-FX71
with 4 speakers, more theater-like effect can be available.
Necessary equipment:
≥ 2 optional wireless systems (SH-FX71)
≥ 2 additional speakers
[Impedance: 3 ≠ to 6 ≠, Speaker input power: 100 W (Min)]
For more details, refer to the operating instructions for the
optional wireless system.
SC-BTT750_350P_VQT2W18_eng.book
13 ページ 2010年6月21日 月曜日 午後4時51分
STEP 3: Connections
Getting started
Turn off all equipment before connection and read the appropriate operating instructions.
Do not connect the AC power supply cord until all other connections are complete.
Speaker cable connection
Connect to the terminals of the same color.






6 PURPLE Subwoofer
5 GREEN
Center speaker
2 RED
Front speaker (Rch)
1 WHITE
Front speaker (Lch)
4 GRAY
Surround speaker (Rch)
3 BLUE
Surround speaker (Lch)
When using the optional wireless
system, do not attempt to connect
any extra surround or surround
back speakers to the main unit.
+
+
-
6
5
2
1
4
3
Main unit
R3 L
R3 L
6
6
SUBWOOFER CENTER FRONT SURROUND
Radio antenna connection
Using an indoor antenna

Main unit

FM ANT (75 Ω )
A FM indoor antenna (supplied)
B Adhesive tape
Affix this end of the antenna where reception is
best.
Using an outdoor antenna
Use outdoor antenna if FM radio reception is poor.
e.g.,

Main unit
FM ANT (75 Ω )


A FM outdoor antenna [Using a TV antenna
(not supplied)]
The antenna should be installed by a competent
technician.
B 75 ≠ coaxial cable (not supplied)
C Antenna plug (not supplied)
VQT2W18
13
SC-BTT750_350P_VQT2W18_eng.book
14 ページ 2010年6月21日 月曜日 午後4時51分
Connection to a TV
≥The basic connection is shown in the included Easy Setting Guide, however, there are more connection examples to optimize
your system setting.
≥This system supports the PCM and the Dolby Digital bitstream input audio. However, for example the system does not support
the DTS bitstream input audio.
≥Do not make the video connections through the VCR.
Due to copy guard protection, the picture may not be displayed properly.
≥Turn off all equipment before connection.
∫ HDMI
∫ OPTICAL IN
The HDMI connection supports VIERA Link “HDAVI Control”
(> 30) when used with a compatible Panasonic TV.
≥ Please use High Speed HDMI Cables that have the HDMI
logo (as shown on the cover). It is recommended that you
use Panasonic’s HDMI cable. When outputting 1080p signal,
please use HDMI cables 5.0 meters (16.4 ft.) or less.
Recommended part number (High Speed HDMI Cable):
RP-CDHS15 (1.5 m/4.9 ft.), RP-CDHS30 (3.0 m/9.8 ft.),
RP-CDHS50 (5.0 m/16.4 ft.), etc.
≥ Audio will be output through the system's speakers when
“Off” is selected in “HDMI Audio Output”. (> 38)
≥ After making the digital audio connection, make settings to
suit the type of audio from your digital equipment (> 29).
Basic connection
VIDEO IN
TV
To enjoy TV audio from this home theater
system’s speakers
AUDIO IN
AUDIO OUT
L
L
R
R


1
2
Connect the TV and the main unit with the
Audio cable (not supplied).
Select “AUX” as a source (> 22).
AUX
AUX
L
VIDEO
OUT
R
A Audio cable (not supplied)
B Video cable (supplied)
VIDEO OUT
Connection for the better audio
VIDEO IN
TV
To enjoy TV audio from this home theater
system’s speakers
OPTICAL
OUT
AUDIO IN
L
1
R


2
Connect the TV and the main unit with the
Optical digital audio cable (not supplied).
Select “DIGITAL IN” or “D-IN” as a source
(> 22).
DIGITAL AUDIO IN
(STB/TV)
L
R
VIDEO
OUT
VIDEO OUT
VQT2W18
14
OPTICAL
OPTICAL
A Video cable (supplied)
B Optical digital audio cable (not supplied)
SC-BTT750_350P_VQT2W18_eng.book
15 ページ 2010年6月21日 月曜日 午後4時51分
TV
OPTICAL
OUT
AV IN
To enjoy TV audio from this home theater
system’s speakers
1


Getting started
Connection for the best picture and audio
≥It is possible to playback 3D videos by connecting this unit with a 3D compatible TV.
Connect the TV and the main unit with the
Optical digital audio cable (not supplied).
Select “DIGITAL IN” or “D-IN” as a source
(> 22).
2
DIGITAL AUDIO IN
(STB/TV)
L
OPTICAL
AV
OUT
R
OPTICAL
(ARC)
A HDMI cable (not supplied)
B Optical digital audio cable (not supplied)
≥ For the TV audio, an audio cable (not supplied) can
be also used by connecting the AUX terminal with
the AUDIO OUT terminal on the TV.
HDMI AV OUT (ARC)
ARC (Audio Return Channel)
(Available when using an ARC compatible TV)
With this function it is possible to receive the digital audio signal from the TV without connecting any other audio cables. Be sure
to connect to the TV’s ARC compatible terminal.
≥Select “ARC” as the audio input source (> 22).
≥Refer to the operating instructions of the TV for the settings to output digital audio.
Connection with Set Top Box, etc.
Refer to the operating instructions of the respective
devices for the optimal connections.
e.g.,

TV
To enjoy TV audio from this home theater
system’s speakers
1
OPTICAL
OUT
2

DIGITAL AUDIO IN
L
(STB/TV)
OPTICAL
R
Connect the STB and the main unit with the
Optical digital audio cable (not supplied).
Select “DIGITAL IN” or “D-IN” as a source
(> 22).
A Optical digital audio cable (not supplied)
B Set Top Box (Cable/Satellite), etc.
OPTICAL
VQT2W18
15
SC-BTT750_350P_VQT2W18_eng.book
16 ページ 2010年6月21日 月曜日 午後4時51分
Connection to a broadband network
The following services can be used when this unit is connected to broadband.
≥ Firmware can be updated (> 20)
≥ You can enjoy BD-Live (> 26)
≥ You can enjoy VIERA CAST (> 33)
For details about connection method, refer to the instructions
supplied with the connected equipment.
∫ Using LAN (ethernet) cable
∫
[BTT750] Using
supplied Wireless LAN
Adaptor
∫ [BTT350] Using optional Wireless LAN
Adaptor (DY-WL10)
L
L
LAN
R
DC OUT
R
5V
500mA
WIRELESS
LAN






A LAN Cable (not supplied)
B Broadband router, etc.
C LAN Cable (not supplied)
D Modem (Broadband) *Provided by ISP
≥ Use shielded LAN cables when connecting to peripheral
devices.
≥ Inserting any cable other than a LAN cable in the LAN
terminal can damage the unit.


A Wireless LAN Adaptor
B Wireless router (Access point), etc.
C LAN Cable (not supplied)
D Modem (Broadband) *Provided by ISP
≥ For up to date compatibility information on your Wireless
router (Access Point) refer to
http://panasonic.jp/support/global/cs/
(This site is in English only.)
≥ The unit is not compatible with public wireless LAN
services provided in airports, stations, cafes etc.
For additional information about this unit refer to
http://www.panasonic.com/consumer/support
[BTT750]
≥ Wireless LAN Adaptors other than the supplied Wireless
LAN Adaptor cannot be used.
≥ When connection conditions are poor, use the supplied
USB extension cable to connect the Wireless LAN Adaptor
provided with this unit.
≥ Do not use any other USB extension cables except the
supplied one.
[BTT350]
≥ Only the Wireless LAN Adaptor DY-WL10 (optional) can
be used.
≥ Read the operating instructions for the Wireless LAN Adaptor
DY-WL10 (optional) thoroughly when using it.
VQT2W18
16
17 ページ 2010年6月21日 月曜日 午後4時51分
[BTT750] Precautions of Wireless LAN Adaptor
[BTT750]
The following limits are in place regarding the usage of this device. You must be aware
of these limits before using this device.
Panasonic will in no way be responsible for any incidental damage which may arise due to
a failure to obey these limits, or to any condition of use or disuse of this device.
≥ Do not use this device to connect to any wireless network for which
you do not have usage rights.
During automatic searches in a wireless network environment, wireless networks
(SSID*) for which you do not have usage rights may be displayed; however,
using these networks may be regarded as illegal access.
* An SSID (Service Set IDentification) is a name used by wireless LAN to
identify a particular network. Transmission is possible if the SSID
matches for both devices.
≥ Data transmitted and received over radio waves may be intercepted
and monitored.
≥ This wireless LAN adaptor contains delicate electronic components.
Please use this adaptor in the manner in which it was intended and
follow the following points:
– Do not expose the adaptor to high temperatures or direct sunlight.
– Do not bend, or subject the adaptor to strong impacts.
– Keep the adaptor away from moisture.
– Do not disassemble or alter the adaptor in any way.
– Do not attempt to install the adaptor in any incompatible device.
This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired
operation of this device.
This transmitter must not be co-located or operated in conjunction with any
other antenna or transmitter.
This product is restricted to indoor use due to its operation in the 5.15 to
5.25 GHz frequency range.
FCC and IC require this product to be used indoors for the frequency
range 5.15 to 5.25 GHz to reduce the potential for harmful interference to
co-channel Mobile Satellite systems. High power radars are allocated as
primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These
radar stations can cause interference with and/or damage this product.
The available scientific evidence does not show that any health problems
are associated with using low power wireless devices.
There is no proof, however, that these low power wireless devices are
absolutely safe.
Low power Wireless devices emit low levels of radio frequency energy
(RF) in the microwave range while being used.
Whereas high levels of RF can produce health effects (by heating tissue),
exposure to low-level RF that does not produce heating effects causes no
known adverse health effects.
Many studies of low-level RF exposures have not found any biological
effects. Some studies have suggested that some biological effects might
occur, but such findings have not been confirmed by additional research.
Wireless LAN adaptor (DY-WL10) has been tested and found to comply
with FCC/IC radiation exposure limits set forth for an uncontrolled
equipment and meets the FCC radio frequency (RF) Exposure Guidelines
in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF)
Exposure rules.
Getting started
SC-BTT750_350P_VQT2W18_eng.book
[BTT750]
FCC Note:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
≥ Reorient or relocate the receiving antenna.
≥ Increase the separation between the equipment and receiver.
≥ Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
≥ Consult the dealer or an experienced radio/TV technician for help.
FCC caution: To maintain compliance with FCC regulations, shielded
interface cables must be used with this equipment. Operation with
non-approved equipment or unshielded cables may result in interference
to radio and TV reception. Any changes or modifications not approved by
the party responsible for compliance could void the user’s authority to
operate this equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way
Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Electronics Company
Telephone No.: 1-800-211-PANA (7262)
[BTT750]
Product Identification Marking is located on the bottom of the Wireless
LAN Adaptor.
VQT2W18
17
SC-BTT750_350P_VQT2W18_eng.book
18 ページ 2010年6月21日 月曜日 午後4時51分
STEP 4: AC power supply cord connection
AC IN
A AC power supply cord (supplied)
B To a household AC outlet
+
-

Main unit

≥ Connect only after all other connections are complete.
≥The main unit consumes a small amount of AC power, even when it is turned off (When the “Quick Start” setting is “Off”: approx.
0.05 W). In the interest of power conservation, if you will not be using this unit for a long time, unplug it from the household AC
outlet.
The unit should be installed near an accessible AC power outlet, with the power cord connected directly to it.
To completely disconnect power from the unit, unplug the power cord from the AC power outlet.
STEP 5: Easy setup
The Easy setup assists you to make necessary
settings.
Follow the on-screen prompts to make basic settings for the
system.
1
2
Press [Í].
Follow the on-screen instructions and
make the settings with [3, 4, 2, 1] and
press [OK].
Language
Select the language used on menu screen.
TV Aspect
Select the aspect to suit your TV and preference.
Wireless System
If a digital transmitter is inserted,
it is required to specify the current settings.
Speakers position
Specify the positioning of the surround speakers.
OK
Speaker check
Check if the connection to each speaker is valid.
OK
Speaker Output
Make surround sound setting for speaker output.
TV Audio
Select the audio input connection from your TV,
[item with “(TV)”].
Quick Start
Speed of startup from power off is increased.
Preparation
Turn on your TV and select the appropriate video input mode
(e.g., VIDEO 1, AV 1, HDMI, etc.) to suit the connections to this
unit.
3
Press [OK] several times to finish the “Easy
setup”.
After completing “Easy setup”, you can perform “Network Easy
Setting”.
≥ You can perform this setup anytime by selecting “Easy setup” in the Setup
menu. (> 39)
≥ Language and TV Aspect settings are automatically retrieved if this unit is
connected to a Panasonic TV (VIERA) supporting HDAVI Control 2 or later
via an HDMI cable.
VQT2W18
18
19 ページ 2010年6月21日 月曜日 午後4時51分
Network Easy Setting
1
Select “Wired” or “Wireless” and press
[OK].
When you experience
problems with settings
Getting started
SC-BTT750_350P_VQT2W18_eng.book
Access Point Connection Setting
Access Point Connection Setting
Network Easy Setting (Connection Check)
Failed to connect to the access point.
Select a connection mode.
Current setting
: Wired
A conflict with another device occurred.
LAN cable connection:
Connect a LAN cable to the unit and select "Wired."
Do you want to configure Access Point Connection
Setting again ?
Wireless LAN connection:
Connect the Wireless LAN Adaptor (DY-WL10) to the USB
port and select "Wireless."
Yes
Wired
Wireless
No
OK
OK
RETURN
If “Wireless LAN Adaptor is not connected.” is displayed, check
that the Wireless LAN Adaptor is fully inserted. Alternatively,
disconnect and reconnect it. If there is still no change in the
display, consult your dealer.
2
Follow the on-screen instructions and
make the settings with [3, 4, 2, 1] and
press [OK].
For wireless LAN connection:
If you are using a Wireless router (Access point) that supports
WPS, you can easily perform the settings by selecting “WPS
(PUSH button method)”.
Otherwise, perform the settings by selecting “Search for
access point” or “Manual setting” in “Other methods”.
Access Point Connection Setting
Select a connection method to use with an access point
of Wireless LAN.
Please refer to the operating instructions of the access
point about connection methods.
WPS (PUSH button method)
Other methods
p
OK
RETURN
Search for access point
WPS (PIN code method)
Manual setting
≥ WPS (Wi-Fi Protected Setup) is a function that facilitates
settings relating to the connection and security of wireless
LAN devices. To see whether your Wireless router (Access
point) supports WPS, check the Wireless router operating
instructions.
Display
Check the following
≥ Please wait a few moments,
and then try again.
A conflict with another
device occurred.
≥ Setting of the Wireless
router (Access point) for
MAC Address etc.
A time out error occurred.
≥ [BTT750] The signal may be
weak. Using the supplied
USB extension cable, adjust
the position of the Wireless
LAN Adaptor. Do not use
any other USB extension
cables except the supplied
one.
≥ [BTT350] The signal may be
weak. Using the USB
extension cable supplied
An authentication error or a
with the Wireless LAN
time out error occurred.
Adaptor, adjust the position
of the Wireless LAN
Adaptor.
≥ The SSID (> 20) and the
encryption key of the
Wireless router (Access
point).
≥ Please wait a few moments,
and then try again.
≥ Connection of Wireless LAN
Adaptor
If there is no improvement in
symptom, contact our
Customer Service Center.
A device error occurred.
Network Easy Setting (Connection Check)
Network Easy Setting (Connection Check)
Complete.
1. LAN cable connection
2. IP address setting
3. Connection to gateway
: Fail
: Fail
: Fail
LAN cable is not connected.
Please check the connection.
Select “Yes” and press [OK] to check network
connection again. Select “No” and press [OK]
to finish Network Easy Setting.
Yes
No
OK
Check the
following
Display
1. LAN cable connection or
Connection to access point
:Fail
2. IP address setting
:Fail
3. Connection to gateway
:Fail
≥ Connection of
the LAN
cables (> 16)
VQT2W18
19
SC-BTT750_350P_VQT2W18_eng.book
20 ページ 2010年6月21日 月曜日 午後4時51分
1. LAN cable connection or
Connection to access point
:Pass
2. IP address setting
:Fail
3. Connection to gateway
:Fail
1. LAN cable connection or
Connection to access point
:Pass
2. IP address setting
:Pass
3. Connection to gateway
:Fail
≥ Connection
and settings
of the hub
and router
≥ Settings of
“IP Address /
DNS
Settings”
(> 39)
Firmware updates
Occasionally, Panasonic may release updated firmware for this
unit that may add or improve the way a feature operates.
These updates are available free of charge.
This unit is capable of checking the firmware automatically
when connected to the Internet via a broadband connection.
When a new firmware version is available, the following screen
is displayed.
The latest firmware is available.
Please update firmware in Setup.
Network Easy Setting (Internet Connection Check)
Network Easy Setting (Internet Connection Check)
Complete.
- Connection to the Internet
To update the firmware
Press [START] > select “Other Functions” > [OK] >
select “Setup” > [OK] > select “Others” > [OK] > select
“Firmware Update” > [OK] > select “Update Now”
: Fail(Error code: B019)
Failed the connection test.
Cannot find the server.(Error code: B019)
Please refer to the operating instructions for the cause
of the error and the solution for it.
Press [OK].
OK
Display
Check the following
Cannot find the server. ≥ “Primary DNS” and “Secondary
(Error code: B019)
DNS” Settings of “IP Address /
DNS Settings” (> 39)
Failed to connect to
the server.
(Error code: B020)
≥ The server may be busy or the
service may have been
suspended. Please wait a few
moments, and then try again.
≥ Settings of “Proxy Server
Settings” (> 39) and the router.
If downloading on this unit fails or this unit is not connected to
the Internet, then you can download the latest firmware from
the following website and burn it to a CD-R to update the
firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
To show the firmware version on this unit. (> 39, “System
Information”)
DO NOT DISCONNECT the unit from the AC power or perform
any operation while the update takes place.
After the firmware is installed, “FINISH” will be displayed on the
unit’s display. Unit will restart and the following screen will be
displayed.
The firmware was updated.
Current Installed Version: x.xx
≥ Refer to the operating instructions of the hub or router.
≥ You can perform this setup anytime by selecting “Network Easy Setting” in
the Setup menu. (> 39)
≥ You can redo these settings individually using “Network Settings”. (> 39)
≥ Do not use this device to connect to any wireless network for which
you do not have usage rights.
During automatic seaches in a wireless network environment, wireless
networks (SSID*) for which you do not have usage rights may be
displayed; however, using these networks may be regarded as illegal
access.
≥ After performing network settings on this unit, the settings (encryption level,
etc.) of the Wireless router (Access point) might change. When you have
trouble getting online on your PC, perform the network settings on your PC
in accordance with the settings of Wireless router (Access point).
≥ Please be aware that connecting to a network without encryption may
result in the content of the communication being illegitimately viewed by a
third party, or the leaking of data such as personal or secret information.
* An SSID (Service Set IDentification) is a name used by wireless LAN to
identify a particular network. Transmission is possible if the SSID matches
for both devices.
VQT2W18
20
OK
RETURN
≥ Downloading will require several minutes. It may take longer or the Internet
may not be connected depending on the connection environment.
≥ If you do not want to check for the latest firmware version, set “Automatic
Update Check” to “Off”. (> 39)
21 ページ 2010年6月21日 月曜日 午後4時51分
STEP 6:
Reprogramming the
remote control
Inserting or removing
media
Getting started
SC-BTT750_350P_VQT2W18_eng.book
When other Panasonic products respond to this
remote control
Change “Remote Control Code” (> 39) on the main unit and
the remote control (the two must match) if you place other
Panasonic products close together and it responds to this
remote control.
SD CARD
To change the code on the main unit.
1
2
While stopped, press [START].
Press [3, 4] to select “Other Functions”
and press [OK].
3
Press [3, 4] to select “Setup” and press
[OK].
4
Press [3, 4] to select “Others” and press
[OK].
5
Press [3, 4] to select “Remote Control
Code” and press [OK].
6
Press [3, 4] to select the code (1 or 2) and
press [OK].
To change the code on the remote control.
1
While pressing [OK]
Press and hold the number button
(1 or 2), which has the same number you
selected in the step 6 for more than 5
seconds.
2
≥ When inserting a media item, ensure that it is facing the right
way up.
≥ While the reading indicator is displayed, do not turn off the
unit or remove the media. Such action may result in loss of
the media's contents.
≥ When removing the SD card, press on the center of the card
and pull it straight out.
∫ To switch sources
Press [BD/SD] to select “BD/DVD” or “SD”.
≥ If media is inserted while the unit is stopped, the source
switches automatically depending on the inserted media.
Press [OK].
VQT2W18
21
SC-BTT750_350P_VQT2W18_eng.book
22 ページ 2010年6月21日 月曜日 午後4時51分
START menu
Major functions of this unit can be operated from the START
menu.
1
2
∫ Selecting the source by the remote control
Button
BD/SD
Press [START].
iPod
Press [3, 4] to select the item and press
[OK].
RADIO
EXT-IN
e.g., BD-Video
Home theater
START
BD-Video
Playback
Source
BD/DVD or SD card (SD) (> 24)
iPod (IPOD) (> 32)
FM Radio (FM) (> 28)
To enjoy sound from the TV (> 29)
AUX*1
ARC*1
DIGITAL IN*1(D-IN)
To enjoy sound from other devices (> 29)
DIGITAL IN*2(D-IN)
Top Menu
*1
Network
*2
Input Select
Sound(Equalizer)
“(TV)” is displayed next to items set for TV AUDIO
input.
“(CABLE/SAT)” is displayed next to DIGITAL IN
when set for CABLE/SATELLITE AUDIO input.
Other Functions
OK
RETURN
Playback
Viewing Picture
Play back the contents.
Top Menu
(> 24)
Menu
(> 24)
Network
Displays the Home screen of the VIERA
CAST (> 33).
Input Select
Switches to each source.
BD/DVD/CD
SD card
iPod
FM Radio: To enjoy the FM radio
(> 28)
To enjoy sound from the TV (> 29)
AUX*1: When using an Audio cable
ARC*1: When using an HDMI cable
(Available when using an ARC
compatible TV)
DIGITAL IN*1: When using an Optical
digital audio cable
To enjoy sound from other devices
(> 29)
DIGITAL IN*2: When using an Optical
digital audio cable
*1
*2
“(TV)” is displayed next to items set for TV
AUDIO input.
“(CABLE/SAT)” is displayed next to DIGITAL
IN when set for CABLE/SATELLITE AUDIO
input.
Sound(Equalizer) (> 23)
Other Functions
Playlists: You can play playlists created
on DVD-VR.
Setup: (> 36)
Card Management: (> 26)
To exit the screen
Press [START].
VQT2W18
22
≥ Items to be displayed may vary with the media.
≥ When the selector is switched, it may take time to playback the selected
video and/or audio.
23 ページ 2010年6月21日 月曜日 午後4時51分
Enjoying sound effects
from all speakers
Enjoying surround sound
effects
1
Press [SURROUND] several times to select
the effect.
STANDARD
Sound is output as it was recorded/encoded.
Speaker output varies depending on the source.
MULTI-CHANNEL
You can enjoy sound from the front speakers, as well as
the surround even when playing a 2-channel sound or
non-surround sound.
MANUAL
≥ The selected effect will only be displayed on the main
unit.
2
While “MANUAL” is displayed, press
[2, 1] and select the desired effect.
DOLBY PRO LOGIC II MOVIE
Suitable for movie software, or the one recorded in Dolby
Surround.
DOLBY PRO LOGIC II MUSIC
Adds 5.1-channel effects to stereo sources.
7.1CH VIRTUAL SURROUND
You can enjoy 6.1/7.1-channel surround-like effect using
5.1-channel speakers.
SUPER SURROUND
You can enjoy sound from all speakers with stereo
sources.
2CH STEREO
You can play any source in stereo. Sound will be output to
the front speakers and the subwoofer only.
∫ Adjusting speaker level during play
3 Press [3] (increase) or [4] (decrease) to adjust the
speaker level for each speaker.
s6 dB to r6 dB
∫ Changing the sound modes
1 Press [SOUND] several times to select the mode.
≥ The selected mode will only be displayed on the main
unit.
2 While the selected mode is displayed
Press [2, 1] and select the desired setting.
Getting started
SC-BTT750_350P_VQT2W18_eng.book
EQUALIZER
You can select sound quality settings.
FLAT
Cancel (no effect is added).
HEAVY
Adds punch to rock.
CLEAR
Clarifies higher sounds.
SOFT
For background music.
SUBWOOFER: (Subwoofer level)
You can adjust the amount of base.
1 (Weakest effect) to 4 (Strongest effect)
≥ The setting you make is retained, and recalled every
time you play the same type of source.
H.BASS
You can enhance low-frequency sound so that heavy
bass sound can be heard clearly, even if the acoustics
of your room are not optimal.
≥ The setting you make is retained, and recalled every
time you play from the same type of source.
CENTER FOCUS
(Effective when playing audio containing center
channel sound.)
You can make the sound of the center speaker seem
like it is coming from within the TV.
WHISPER SURROUND: (Whisper-mode Surround)
You can enhance the surround effect for low volume
sound. (Convenient for late night viewing.)
≥ The sound effects/modes may not be available or have no effect with some
sources.
≥ You may experience a reduction in sound quality when these sound
effects/modes are used with some sources. If this occurs, turn the sound
effects/modes off.
1 Press and hold [–CH SELECT] to activate the speaker
setting mode.
2 Press [–CH SELECT] several times to select the speaker.
Each time you press the button:
L R—) C_) RS_)RB*_) LB*_)LS_) SW
^"""""""""""""""""""""""""""""b
* When the optional surround back speakers are
connected.
L R: Front speaker (left and right: only the balance is
adjustable.)
≥ Press [2, 1] to adjust the balance of the front
speakers.
C: Center speaker
RS: Surround speaker (right)
RB*: Surround back speaker (right)
LB*: Surround back speaker (left)
LS: Surround speaker (left)
SW: Subwoofer
≥ The channels not included in the playing audio will not be
displayed (subwoofer is displayed even if it is not
included).
VQT2W18
23
SC-BTT750_350P_VQT2W18_eng.book
24 ページ 2010年6月21日 月曜日 午後4時51分
Playback
Playing video contents
[BD] [DVD] [CD] [SD]
These functions may not work depending on the media and
contents.
Preparation
Turn on the television and select the appropriate video input on
the television.
1
2
Other operations during play
Press [Í] to turn on the unit.
Stop
Insert the media.
Press [∫STOP].
The stopped position is memorized.
Play starts.
≥ If the menu is displayed, press [3, 4, 2, 1] to select
the item and press [OK].
≥ When a message screen is displayed while playing back
3D compatible video software, play back in accordance
with the instructions.
≥ If play does not start, press [1 PLAY].
Resume play function
Press [1 PLAY] to restart from this position.
≥ The position is cleared if the tray is opened or you press
[∫STOP] several times to display “STOP” on the unit’s
display.
≥ On BD-Video discs including BD-J (> 47), the resume
play function does not work.
∫ To show menus
You can show Top Menu, DIRECT NAVIGATOR or Pop-up
Menu.
Press [TOP MENU/DIRECT NAVIGATOR] or [POP-UP
MENU].
≥ Press [3, 4, 2, 1] to select the item and press [OK].
≥ Pop-up menu also appears by pressing [SUB MENU] and
selecting “Pop-up Menu”.
∫ To show the status messages
While playing, press [STATUS].
The status messages give you information about what is
currently being played. Each time you press [STATUS], the
information displayed will change.
e.g. BD-Video
C1
Search/Slow-motion
Search
While playing, press [SEARCH6] or [SEARCH5].
≥ Music and MP3: The speed is fixed to a single step.
Slow-motion
While paused, press [SEARCH6] or [SEARCH5].
≥ BD-Video and AVCHD: Forward direction [SEARCH5]
only.
BD-Video
0:05.14
0:20.52
Current position
Press [;PAUSE].
≥ Press [;PAUSE] again or [1 PLAY] to restart play.
The speed increases up to 5 steps.
≥ Press [1 PLAY] to revert to normal playback speed.
T: Title, C: Chapter, PL: Playlist
Elapsed time in the title
 T1
Pause
Play
Total time
≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED. Press
[∫STOP] when you finish to preserve the unit’s motor and your television
screen.
≥ Depending on media and contents, the display may change or may not
appear.
≥ When a menu is displayed at the time a 1080/60p (1920k1080/60
progressive) video recorded by a Panasonic digital high-definition video
camera is played back, select “Play Video (AVCHD)”.
≥ It is not possible to playback AVCHD and MPEG2 video which have been
dragged and dropped, copied and pasted to the media.
Skip
While playing or paused, press [SKIP:] or [SKIP9].
Skip to the title, chapter or track you want to play.
≥ Each press increases the number of skips.
Frame-by-frame
While paused, press [2] (2;) or [1] (;1).
≥ Press and hold to change in succession forward or
backward.
≥ Press [1 PLAY] to revert to normal playback speed.
≥ BD-Video and AVCHD: Forward direction [1] (;1) only.
Changing audio
Press [AUDIO].
You can change the audio channel number or soundtrack
language (> 46), etc.
VQT2W18
24
SC-BTT750_350P_VQT2W18_eng.book
25 ページ 2010年6月21日 月曜日 午後4時51分
Useful functions
Press [SUB MENU].
Select an item and press [OK].
While DIRECT NAVIGATOR screen is displayed
Properties
To display the titles properties (recording
date, etc.)
View
Chapters
To select the chapter
To picture
Playing still pictures (> 27)
While playing
Screen
Aspect
When black bars are shown at the top,
bottom, left, and right sides of the screen, you
can enlarge the image to fill the screen.
Top Menu
To display Top Menu.
Pop-up
Menu
To display Pop-up Menu.
Menu
To display Menu.
≥ Depending on the played contents if you perform “Screen
Aspect”, there may be no effect.
≥ When “TV Aspect” (> 37) is set to “4:3” or “4:3 Letterbox”,
the “Zoom” effect in “Screen Aspect” is disabled.
What is BONUSVIEW?
BONUSVIEW allows you to enjoy functions such as
picture-in-picture or secondary audio etc.
What is BD-Live?
In addition to the BONUSVIEW function, BD-Live allows you to
enjoy more functions such as subtitles, exclusive images and
online games by connecting this unit to the Internet.
≥ The usable functions and the operating method may vary
with each disc, please refer to the instructions on the disc
and/or visit their website.
Playback
1
2
Enjoying BD-Live or
BONUSVIEW in BD-Video
Playing picture-in-picture
To turn on/off secondary video
1 Press [DISPLAY].
2 Press [3, 4] to select the “Disc” menu and press [1].
3 Press [3, 4] to select the “Signal Type” menu and press
[OK].
4 Press [3, 4] to select the “Video” under “Secondary
Video” menu and press [1].
5 Press [3, 4] to select the “On” or “Off”.
6 Press [RETURN] to exit.

≥ Depending on the media and contents, displayed items are different.

A Secondary video
B Primary video
To turn on/off secondary audio
1 Press [DISPLAY].
2 Press [3, 4] to select the “Disc” menu and press [1].
3 Press [3, 4] to select the “Signal Type” menu and press
[OK].
4 Press [3, 4] to select the “Soundtrack” under “Secondary
Video” menu and press [1].
5 Press [3, 4] to select the “On” or “Off”.
When “On” is selected, press [1] and then press [3, 4] to
select the language.
6 Press [RETURN] to exit.
≥ During search/slow-motion or frame-by-frame, only the primary video is
displayed.
≥ When “BD-Video Secondary Audio” in “Digital Audio Output” is set to “Off”,
secondary audio will not be played (> 37).
VQT2W18
25
SC-BTT750_350P_VQT2W18_eng.book
26 ページ 2010年6月21日 月曜日 午後4時51分
Enjoying BD-Live discs with
Internet
Some BD-Live content available on the Blu-ray discs may
require an Internet account to be created in order to access the
BD-Live content. Follow the screen display or instruction
manual of the disc for information on acquiring an account.
1
2
Enjoying 3D video
[BD]
You can enjoy powerful videos with realistic sensations of the
3D compatible video software by connecting this unit with a
High Speed HDMI Cable to a 3D compatible TV.
Connect to the network. (> 16)
Insert an SD card (with 1 GB or more free space).
SD card is used as the local storage (> 47).
3
Insert the disc.
∫ Deleting data/Formatting SD cards
There are various functions in BD-Video that you can enjoy by
copying data to the SD card. (Local Storage) If you no longer
need data recorded on the SD card, you can delete data with
the following operation.
1
2
3
4
Insert an SD card.
Press [START].
Press [3, 4] to select “Other Functions” and press [OK].
Press [3, 4] to select “Card Management” and press
[OK].
5 Press [3, 4] to select “BD-Video Data Erase” or “Format
SD Card” and press [OK].
Card Management
SD card
Preparation
Connect 3D compatible TV to an HDMI AV OUT terminal of
this unit using a High Speed HDMI Cable. (> 14, 15)
≥ Perform the necessary preparations for the TV.
Method of playback is the same as normal disc playback.
(> 24)
≥ Playback following the instructions displayed on the screen.
3D settings
No. of Files 6
Free space 300 MB
BD-Video Data Erase
Format SD Card
OK
The illustration is an image.
Format this SD Card.
Perform the following settings as necessary.
Playback
Method for 3D
Disc
It is also possible to play back 3D discs
in 2D (conventional video). (> 36)
3D Type
If you cannot play back in 3D, change
the settings as required by the
connected TV format. (> 37)
≥ Change the settings for 3D on the TV
also when “Checker board” or “Side
by side” is selected.
3D Playback
Precautions
Hide the 3D viewing warning screen.
(> 36)
Pop-Out Level
Adjust the pop-up position for the
Playback menu or message screen etc.
(> 35)
RETURN
6 Press [2, 1] to select “Yes” and press [OK].
7 Press [2, 1] to select “Start” and press [OK].
≥ To use the above functions, it is recommended that you format the card on
this unit. If the SD card you use is formatted, all data on the card will be
erased. It cannot be recovered.
≥ “BD-Live Internet Access” may need to be changed for certain discs
(> 36).
≥ When discs supporting BD-Live are played back, the player or disc IDs
may be sent to the content provider via the Internet.
≥ Please refrain from viewing 3D images if you do not feel well or are
experiencing visual fatigue.
In the event that you experience dizziness, nausea, or other discomfort
while viewing 3D images, discontinue use and rest your eyes.
≥ Depending on the connected TV, the video being played back might switch
to 2D video due to changes in resolution etc. Check the 3D setting on the
TV.
≥ 3D images may not output as settings of “HDMI Resolution” and “24p
Output”. (> 38)
≥ When playing back a disc that has recorded titles with Side by side
(2 screen structure) which can be enjoyed in 3D, it will playback in
accordance with the 3D settings on the TV, regardless of the settings
above.
j Screen displays, such as Playback menu, will not display correctly.
VQT2W18
26
27 ページ 2010年6月21日 月曜日 午後4時51分
Playing still pictures
[BD] [DVD] [CD] [SD]
(BD-RE, DVD-RAM/R/R DL, CD-R/RW, SD Card)
1
Insert a disc or SD card.
If the menu is displayed, press [3, 4] to select the item
and press [OK].
2
BD-RE, DVD-RAM
Press [3, 4, 2, 1] to select the album and
press [OK].
Press [SUB MENU].
Select an item, then press [OK].
While “Album View” or “Picture View” screen is displayed
Start
Slideshow
You can display still pictures one by one at a
constant interval.
Slideshow
Settings
Display Interval
Change the display interval.
Transition Effect
Set display method.
Repeat Play
Repeat slideshow.
Soundtrack
Music files on an iPod/iPhone or a music CD
can be played back as background music
during the slideshow.
Press [3, 4, 2, 1] to select “Set” and
press [OK].
Select Root
folder
To switch to another higher folder.
≥ Only if there is a multiple number of higher
folders recognizable.
Select
Folder
To select the still pictures in another folder.
To Video
Playing video contents (> 24).
To album
view
To display album view.
Picture
Video
2006 9 12
Total 13
106_DVD
Total 8

3
1
2
Album View
DIRECT NAVIGATOR
DVD-RAM(VR)
SUB
MENU
Useful functions
Previous
R Video
OK
RETURN

Next

G Picture
Slideshow
B
Page 02/02
Y
Press [OK] to go to Picture View.
Press [3, 4, 2, 1] to select the still
picture and press [OK].
DIRECT NAVIGATOR
Picture View
DVD-RAM(VR)
Video
Picture
2006 9 12
0001
0002
0003
0004
0005
0006
0007
0008
Playback
SC-BTT750_350P_VQT2W18_eng.book
0009
Page 001/001
SUB
MENU
Play
RETURN
Press [2, 1] to display the previous or next still picture.
To exit the screen
Press [TOP MENU/DIRECT NAVIGATOR].
∫ To show the picture properties
While playing, press [STATUS] twice.
e.g. JPEG on DVD-RAM
Shooting date
While playing (except for slideshow)
Rotate Right Rotate the still picture.
Rotate Left
Zoom out
Reduce the still picture.
≥ This function is only available for
small-sized still pictures.
Zoom in
Cancel “Zoom out”.
Photo 11/12/2007
To exit the screen
Press [STATUS].
Total
3/9
≥ Depending on the media and contents, displayed items are different.
≥ When a still picture with large number of pixels is played, the display
interval may become longer. Even if the setting is changed, the display
interval may not become shorter.
≥ When both a music CD and an iPod/iPhone is inserted to this unit, the
iPod/iPhone has a priority to be played back as background music.
VQT2W18
27
SC-BTT750_350P_VQT2W18_eng.book
28 ページ 2010年6月21日 月曜日 午後4時51分
Playing music
Radio
Listening to the Radio
[DVD] [CD]
(DVD-R/R DL, music CD, CD-R/RW)
1
Insert a disc.
If the menu is displayed, press [3, 4] to select the item
and press [OK].
2
Presetting stations
automatically
Press [3, 4] to select the track and press
[OK].
DIRECT NAVIGATOR
CD
No.
01
02
03
04
05
0.09
Track1
5 Tracks / Total Play Time 20min54sec
Music list
Track Name
Track1
Track2
Track3
Track4
Track5
1
2
Play Time
4min30sec
3min41sec
4min30sec
3min11sec
5min 2sec
1 While the “Music list” is displayed
Press [SUB MENU].
2 Press [3, 4] to select “Select Folder” and press [OK].
Press [STATUS] to select the position to
start the auto preset search.
CURRENT:
To begin auto preset with the current frequency.*
* To change the frequency, refer to “Presetting stations
manually”.
3
Press and hold [OK].
Release the button when “AUTO” is displayed.
” indicates the track currently playing.
∫ Playing a track in another folder
Press [RADIO] to select “FM”.
LOWEST:
To begin auto preset with the lowest frequency (FM87.9 or
FM87.5).
4.30
Play
RETURN
“
Up to 30 stations can be set.
The tuner starts to preset all the stations it can receive into
the channels in ascending order.
≥ “SET OK” is displayed when the stations are set, and the radio tunes to the
last preset station.
≥ “ERROR” is displayed when automatic presetting is unsuccessful. Preset
the stations manually.
Presetting stations manually
≥ You cannot select folders that contain no compatible tracks.
Preparation
Select a radio broadcast.
1 Press [RADIO] to select “FM”.
2 Press [SEARCH6] or [SEARCH5] to select the
frequency.
≥ To start automatic tuning, press and hold [SEARCH6], [SEARCH5]
until the frequency starts scrolling. Tuning stops when a station is found.
1
While listening to the radio broadcast
Press [OK].
2
While “P” is flashing on the display
Press the number buttons to select a
channel.
To select a 1-digit number
e.g., 1: [1] B [OK].
To select a 2-digit number
e.g., 12: [1] B [2]
≥ A station previously stored is overwritten when another station is stored in
the same channel preset.
VQT2W18
28
SC-BTT750_350P_VQT2W18_eng.book
29 ページ 2010年6月21日 月曜日 午後4時51分
TV
Press [RADIO] to select “FM”.
Preparation
Press the number buttons to select the
channel.
Turn on your TV and select the appropriate audio input mode
[AUX, ARC, D-IN] to suit the connections to this unit. (> 22)
Surround sound effects
You can enhance stereo sources with surround sound effect.
1
∫ Display on the main unit
TUNED/STEREO:
TUNED:
Displayed when receiving stereo
broadcasting
Displayed when receiving monaural
broadcasting or monaural sound is
selected.
2
Surround modes to enjoy TV audio or stereo
sources from all speakers:
≥ DOLBY PRO LOGIC II MOVIE
≥ DOLBY PRO LOGIC II MUSIC
≥ SUPER SURROUND
Press [AUDIO] to display “MONO”.
The sound becomes monaural.
≥ This setting can be preset for each broadcasting station.
∫ FM frequency step
Main unit:
The factory setting is set to 0.2 MHz, it can be changed to
receive broadcasts allocated in 0.1 MHz. You may need to
change this setting if the tuner seems to skip over the correct
frequency for stations in your area.
1 Press [SELECTOR] to select “FM”.
2 Press and hold [SELECTOR].
While “MANUAL” is displayed on the unit’s display
Press [2, 1] and select the desired effect.
∫ If noise is excessive
Press the button again to cancel the mode. “AUTO
STEREO” will be displayed on the main unit. Depending on
the broadcast system, stereo or monaural will be selected.
“MONO” is also canceled when you change the frequency.
Press [SURROUND] several times to select
the effect.
Playback
To select a 1-digit number
e.g., 1: [1] B [OK].
To select a 2-digit number
e.g., 12: [1] B [2].
Alternatively, press [W, X] or [2, 1].
Radio
1
2
Enjoying TV with unit’s
speakers
For more detailed information on this operation, please refer to
the “Enjoying surround sound effects” section on page 23.
Sound modes
TV
Listening/confirming the preset
channels
You can adjust the mode depending on the source or situation.
1
2
Press [SOUND] several times to select the
mode.
While the selected mode is displayed on the unit’s
display
Press [2, 1] and select the desired setting.
For more detailed information on this operation, please refer to
the “Changing the sound modes” section on page 23.
Selecting the type of audio
from the DIGITAL AUDIO IN
terminal
After a few seconds the display changes to show the
current lowest frequency. Continue to hold the button
down. The lowest frequency changes and the step is
changed.
To return to the original settings, repeat steps 1 and 2.
≥ After changing the setting, previously preset frequencies will be cleared.
Preset them again.
1
Press [EXT-IN] several times to select
“D-IN” (DIGITAL IN).
2
Press [AUDIO] several times to select the
type.
MAIN
SAP*
MAIN+SAP* (stereo audio)
* “SAP” = Secondary Audio Program
(Only works with Dolby Dual Mono)
≥ “MAIN” or “SAP” is not available if “On” is selected in
“Digital Audio Input”. (> 37)
≥ Audio that is input through the DIGITAL AUDIO IN or AUX terminals are not
output from the HDMI AV OUT terminal.
VQT2W18
29
SC-BTT750_350P_VQT2W18_eng.book
30 ページ 2010年6月21日 月曜日 午後4時51分
Linked operations with
the TV
(VIERA LinkTM “HDAVI ControlTM”)
One touch play
You can turn on this unit and the TV, and start play with a
single press of a button.
While the unit and the TV are in standby mode;
Press [1 PLAY].
Speaker control
What is VIERA Link “HDAVI Control”?
VIERA LinkTM is a new name for EZ SyncTM.
VIERA Link “HDAVI Control” is a convenient function
that offers linked operations of this unit, and a
Panasonic TV (VIERA) under “HDAVI Control”.
You can use this function by connecting the equipment
with an HDMI cable. See the operating instructions for
connected equipment for operational details.
Preparation
1 Set “VIERA Link” to “On” (> 38).
(The default setting is “On”.)
2 Set the “HDAVI Control” operations on the connected
equipment (e.g., TV).
3 Turn on all “HDAVI Control” compatible equipment and
select this unit’s input channel on the connected TV so that
the “HDAVI Control” function works properly.
Also when the connection or settings are changed,
repeat this procedure.
Setting the audio link
∫ Setting the audio link with the TV
With the remote control;
≥ Select the actual TV audio connection on the main unit.
1 Press [START] and press [3, 4] to select “Other
Functions” and press [OK].
2 Press [3, 4] to select “Setup” and press [OK].
3 Press [3, 4] to select “TV / Device Connection” and press
[OK].
4 Press [3, 4] to select “TV Audio Input”.
5 Press [2, 1] to switch “AUX”,“ARC” or “DIGITAL IN”.
≥Select “AUX” or “ARC”*1 in “TV Audio Input” when the
DIGITAL AUDIO IN terminal is used for the STB
connection.
Whenever the connection or settings are changed, reconfirm
the points above.
∫ Setting the audio link with the STB
You can select whether audio is output from the unit’s
speakers or the TV speakers by using the TV menu settings.
Home theater
This unit’s speakers are active.
≥ When this unit is in standby mode, changing the TV
speakers to this unit’s speakers in the TV menu will
automatically turn the unit on and select, “AUX”*2, “ARC”*1,*2
or “D-IN” (DIGITAL IN)*2 as the source.
≥ You can control the volume setting using the volume or mute
button on the TV’s remote control.
≥ If you turn off this unit, TV speakers will be automatically
activated.
TV
TV speakers are active.
≥ The volume of this unit is set to “0”.
≥ Audio output is 2-channel audio.
≥ When switching between this unit’s speakers and TV speakers, the TV
screen may be blank for several seconds.
≥ The audio from “AUX”, “DIGITAL IN”, “FM Radio” or “iPod” will be output
from this unit's speakers even though the TV speakers are selected.
Automatic input switching
(Power on link)
When the following operations are performed, the television
will automatically switch the input channel and display the
corresponding action. When the TV is off, the TV will
automatically turn on.
jWhen play starts on the unit
jWhen an action that uses the display screen is performed
(e.g., DIRECT NAVIGATOR screen)
≥ When you switch the TV input to TV tuner mode, this unit will
automatically switch to “AUX”*2, “ARC”*1,*2 or “D-IN” (DIGITAL
IN)*2.
≥ This function does not work when the iPod/iPhone selector is
chosen. (> 32)
With the remote control;
≥ Select the STB input channel on the TV.
1 Press [EXT-IN] to select “D-IN”.
2 Press [STATUS] to select “CABLE/SATELLITE AUDIO
ON”.
≥ If the input channel of the STB on the TV is changed or if you
want to change the device allocated for the linked
operations, select “CABLE/SATELLITE AUDIO OFF” in step
2 above and then repeat steps 1 to 2.
≥ VIERA Link “HDAVI Control”, based on the control functions provided by
HDMI which is an industry standard known as HDMI CEC (Consumer
Electronics Control), is a unique function that we have developed and
added. As such, its operation with other manufacturers’ equipment that
supports HDMI CEC cannot be guaranteed.
≥ This unit supports “HDAVI Control 5” function.
“HDAVI Control 5” is the newest standard (current as of December, 2009)
for Panasonic’s HDAVI Control compatible equipment. This standard is
compatible with Panasonic’s conventional HDAVI equipment.
VQT2W18 ≥ Please refer to individual manuals for other manufacturers’ equipment
supporting VIERA Link function.
30
Automatic lip-sync function
(for HDAVI Control 3 or later)
Delay between audio and video is automatically adjusted,
enabling you to enjoy smooth audio for the picture (> 37,
“Audio Delay”).
≥ This function works only when “BD/DVD”, “SD”, “AUX”*2,
“ARC”*1,*2, “D-IN” (DIGITAL IN)*2 is selected as the source
on this unit.
*1
*2
The selection works only when using an ARC compatible TV.
“AUX”, “ARC” or “D-IN” works depending on the setting in “Setting the
audio link”.
SC-BTT750_350P_VQT2W18_eng.book
31 ページ 2010年6月21日 月曜日 午後4時51分
Power off link
All connected equipment compatible with “HDAVI Control”,
including this unit, automatically turns off when you switch the
television off.
Playing music continuously even after turning off the TV
(When the unit is connected to a Panasonic TV (VIERA) that
supports HDAVI Control 2 or later.)
Select “Video” in “Power Off Link” (> 38)
Easy control only with VIERA
remote control
Only TV supports “HDAVI Control 2” or later
By using the TV remote control, you can play discs using the
“Control Panel” and display the Top Menu or Pop-up Menu,
etc.
≥ This works only during “BD/DVD” or “SD” playback and
resume modes.
1
Press [SUB MENU].
e.g. BD-Video
Screen Aspect
TV
Control Panel
Top Menu
Pop-up Menu
SUB
MENU
2
OK
RETURN
Select an item, then press [OK].
≥ The sub menu may not appear while the Top Menu for
BD-Video or DVD-Video is displayed.
≥ The buttons that you can use for this unit vary depending on the TV. For
details, refer to the operating instructions of the TV.
≥ The operation of this unit may be interrupted when you press incompatible
buttons on the TV remote control.
≥ Depending on the menu, some button operations cannot be performed
from the TV’s remote control.
VQT2W18
31
SC-BTT750_350P_VQT2W18_eng.book
32 ページ 2010年6月21日 月曜日 午後4時51分
Other devices
Using the iPod/iPhone
iPod/iPhone Connection
Preparation
≥ Before connecting/disconnecting the iPod/iPhone, turn the
main unit off or reduce the volume of the main unit to its
minimum.
≥ Make sure that the video cable connection is made to view
photos/videos from the iPod/iPhone.
1
2
Push # to open the iPod/iPhone lid.
Connect the iPod/iPhone (not supplied)
firmly.
1
2
iPod/iPhone
iPod/iPhone Playback
Preparation
≥ Make sure that the “IPOD” source is selected. Press [iPod] to
select the source.
≥ To view photos/videos from the iPod/iPhone
Operate the iPod/iPhone menu to make the appropriate
photo/video output settings for your TV.
≥ To display the picture, turn on the TV and select the
appropriate video input mode.
Enjoy music/video
1
2
Press [iPod] to select “IPOD”.
3
Press [3, 4] to select an item and press
[OK].

Press [STATUS] several times to select the
music menu or videos menu.
≥ Repeat this step until the selected title starts playback.
≥ Press [2, 1] to display the previous or next page.
e.g., music playback screen
Main unit

A Dock adapter (not supplied)
≥ Attach the dock adapter until firmly fitting into the
dock. The adapter should be supplied with your
iPod/iPhone for the stable use.
If you need an adapter, consult your iPod/iPhone
dealer.
B Dock for iPod/iPhone
iPod
Good morning
Ronaldo
Happy days
1:00
To exit, press [TOP MENU/DIRECT NAVIGATOR].
About recharging the battery
≥ iPod/iPhone will start recharging regardless of whether this unit is on or off.
≥ “IPOD ¢” will be shown on the main unit’s display during iPod/iPhone
charging in main unit standby mode.
≥ Once fully recharged, additional recharging will not occur.
Compatible iPod/iPhone (as of June 2010)
≥ Compatibility depends on the software version of your iPod/
iPhone.
VQT2W18
32
Name
Memory size
iPod nano 5th generation (video camera)
8 GB, 16 GB
-2:30
45 of 1230
Shuffle (Albums)
Repeat (All)
Enjoy photos
1
2
Press [iPod] to select “IPOD”.
3
4
Switch the TV input to video in.
Press [STATUS] several times to select
“ALL” on the unit’s display.
Play a slideshow on your iPod/iPhone.
The picture will be displayed on your TV.
iPod touch 2nd generation
8 GB, 16 GB, 32 GB, 64 GB
To use the iPod touch/iPhone features
iPod classic
120 GB, 160 GB (2009)
iPod nano 4th generation (video)
8 GB, 16 GB
iPod classic
160 GB (2007)
1 Press the Home button on the iPod touch/iPhone.
2 Select the iPod touch/iPhone features on the touch screen
to operate.
iPod touch 1st generation
8 GB, 16 GB, 32 GB
iPod nano 3rd generation (video)
4 GB, 8 GB
iPod classic
80 GB
iPod nano 2nd generation (aluminum)
2 GB, 4 GB, 8 GB
iPod 5th generation (video)
60 GB, 80 GB
iPod 5th generation (video)
30 GB
iPod nano 1st generation
1 GB, 2 GB, 4 GB
iPod 4th generation (color display)
40 GB, 60 GB
iPod 4th generation (color display)
20 GB, 30 GB
iPod 4th generation
40 GB
iPod 4th generation
20 GB
iPod mini
4 GB, 6 GB
iPhone 3GS
16 GB, 32 GB
iPhone 3G
8 GB, 16 GB
iPhone
4 GB, 8 GB, 16 GB
You can use the remote control to operate the iPod/iPhone
menu.
The operation may vary among iPod/iPhone models.
≥ [3, 4]: To navigate menu items
≥ [OK]: To go to the next menu.
≥ [RETURN]: To return to the previous menu.
SC-BTT750_350P_VQT2W18_eng.book
33 ページ 2010年6月21日 月曜日 午後4時51分
Advanced operations
Other methods of playback
1
2
Press [START].
Press [3, 4] to select “Menu” and then
press [OK].
Enjoying VIERA
CASTTM
You can access a selection of Internet services from the Home
screen with VIERA CAST, for example YouTube, Picasa Web
Albums. (Current as of June 2010)
3
Press [3, 4] to select “Playback Mode”
and then press [OK].
4
Press [3, 4] to select an item and press
[OK].
≥ Network connection (> 16)
≥ Network setting (> 19)
Shuffle (For music playback only.)
Songs:
Play all songs on iPod/iPhone in random order.
Albums:
Play all songs on an album in random order.
1
Repeat
One:
Play a single song/video repeatedly.
All:
Play all songs/videos from selected items (e.g., Playlists,
Albums, etc.) repeatedly.
Preparation
Press [VIERA CAST].
Message is displayed. Please read these instructions
carefully and then press [OK].
2
Press [3, 4, 2, 1] to select the item and
press [OK].
Operable buttons:
[3, 4, 2, 1], [OK], [RETURN], colored buttons, number
buttons
VIERA CAST Home screen;
Weather
New York, NY
L
XXX
76°
56°
COMING SOON
XXXXXX
XXXXXX
Featured Photos
Featured Videos
≥ The setting of the playback mode will be kept until changes are made on
the same iPod/iPhone.
≥ This function does not work when “All (iPod display)” is selected.
Functions
Play
[∫STOP]
Pause
[;PAUSE]
[SKIP:,
SKIP9]
(Press and hold)
[SEARCH6,
SEARCH5]
COMING SOON
To return to VIERA CAST Home screen
Press [VIERA CAST].
(For music and video playback only)
[1 PLAY]
XXXXXX
BACK
Images are for illustration purposes, contents may
change without notice.
Basic controls
Buttons
MORE
Skip
Search
≥ Surround sound effect and sound mode are available (> 23).
To exit from VIERA CAST
Press [EXIT], [START] or [TOP MENU/DIRECT NAVIGATOR].
≥ When the Blu-ray disc logo is selected on the Home screen,
the playback source will be changed and go back to the
source previously selected.
≥ In the following cases, settings are possible using “Internet Content
Settings” (> 39)
– When restricting the use of VIERA CAST.
– When the audio is distorted.
– When wrong time is displayed
≥ If using slow Internet connection, the video may not be displayed correctly.
A high-speed Internet service with a speed of at least 6 Mbps is
recommended.
≥ Be sure to update the firmware when a firmware update notice is displayed
on the screen. If the firmware is not updated, you will not be able to use the
VIERA CAST function. (> 20)
Other devices
Press [3, 4] to select the setting and press
[OK].
H
Advanced operations
5
NW 10
mph
69°
TOMORROW
≥ VIERA CASTTM home screen is subject to change without notice.
≥ The services through VIERA CASTTM are operated by their respective
service providers, and service may be discontinued either temporarily or
permanently without notice. Therefore, Panasonic will make no warranty
for the content or the continuity of the services.
≥ All features of websites or content of the service may not be available.
≥ Some content may be inappropriate for some viewers.
≥ Some content may only be available for specific countries and may be
presented in specific languages.
VQT2W18
33
SC-BTT750_350P_VQT2W18_eng.book
34 ページ 2010年6月21日 月曜日 午後4時51分
Playback menu
1
2
Disc
Press [BD/SD] to select “BD/DVD”.
Signal Type
Press [DISPLAY].
Primary Video
e.g., BD-Video
Disc
Play
Video
Audio
Signal Type
Subtitle
Subtitle Style
Menus
Items
Off
-
Main
Video
The recording method of original video
appears.
Soundtrack
Select the type of audio or language.
1ENG
Angle
-
Settings
3
Press [3, 4] to select the menu and press
[1].
4
Press [3, 4, 2, 1] to select the item and
press [1].
5
Press [3, 4] to select the setting.
Some items can be changed by pressing [OK].
To exit the screen
Press [DISPLAY].
Depending on the condition of the unit (playing, stopped,
etc.) and media contents, there may be some items that
you cannot select or change.
Regarding Language, Audio attribute and Video attribute:
(> 46)
Secondary Video
Video
Select on/off of images. The recording
method of original video appears.
Soundtrack
Select on/off of audio and the language.
Video
The recording method of original video appears.
Soundtrack
Show or change the soundtrack.
Subtitle
Turn the subtitle on/off, and change the language depending
on the media.
Subtitle Style
Select the subtitle style.
Audio channel
Select the audio channel number.
(> 24, “Changing audio”)
Angle
Select the number of the angle.
Some items may be changed only on the disc specific menu. (> 24)
VQT2W18
34
SC-BTT750_350P_VQT2W18_eng.book
35 ページ 2010年6月21日 月曜日 午後4時51分
Play
Audio
Repeat Play
Sound Effects*1, *2
(Only when the elapsed time is being displayed on the unit’s
display.)
Select the item which you want to repeat. The items displayed
differ depending on the type of media.
(Discs recorded at 48 kHz or less)
This feature gives you brighter sound by increasing the high
frequency portion of the audio.
Re-master 1
Pop and rock
Select “Off” to cancel.
Re-master 2
Jazz
Random
Re-master 3
Classical
Select whether or not to play random.
Dialog Enhancer*1
Pop-Out Level
[Only when “Full HD” is selected in “3D Type” (> 37).]
Pop-up position for the Playback menu or message screen etc.
can be adjusted during 3D playback.
Video
Picture
Select the picture quality mode during play.
Detail Clarity
The picture is sharp and detailed.
The volume of the center channel is raised to make dialog
easier to hear.
High Clarity Sound
When connected to TV via the HDMI AV OUT terminal for
outputting image, it produces clearer sound.
≥ Only when you have selected “Enable” in “High Clarity
Sound” (> 37).
*1
*2
When audio is output from the HDMI AV OUT terminal this function is
effective only when “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/
DTS-HD” is set to “PCM”. (> 37)
This function has no effect when the type of audio is Dolby Pro Logic II.
Progressive
Select the method of conversion for progressive output to suit
the type of material being played.
≥ When the content is distorted change the settings from
“Auto” to “Video”.
24p
Advanced operations
Movies and other material recorded on DVD-Video at 24p are
output at 24p.
≥ Only when you have selected “On” in “24p Output” (> 38)
VQT2W18
35
SC-BTT750_350P_VQT2W18_eng.book
36 ページ 2010年6月21日 月曜日 午後4時51分
Setup menu
Change the unit’s settings if necessary. The settings remain
intact even if you switch the unit to standby.
1
Press [START] and press [3, 4] to select
“Other Functions” and press [OK].
2
Press [3, 4] to select “Setup” and press
[OK].
Setup
Disc
Video
Audio
Disc
DVD-Video Ratings
Set a ratings level to limit DVD-Video play.
≥ Follow the on-screen instructions. Enter the 4-digit password
with the number buttons when the password screen is
shown.
BD-Video Ratings
Set an age limit of BD-Video play.
≥ Follow the on-screen instructions. Enter the 4-digit password
with the number buttons when the password screen is
shown.
Display
Playback Method for 3D Disc
TV / Device Connection
Select the playback method of 3D compatible video software.
Network
3D Playback Precautions
Others
OK
RETURN
3
Press [3, 4] to select the menu and press
[OK].
4
Press [3, 4] to select the item and press
[OK].
If there are any other items, repeat these steps.
5
Press [3, 4, 2, 1] to select the option and
press [OK].
≥ There may be differences in operation methods. If this
happens, follow the on-screen instructions for the operation.
About the password
The password of the following items are common.
Don’t forget your password.
≥ “DVD-Video Ratings”
≥ “BD-Video Ratings”
≥ “Lock” (> 39)
Set to display or hide the 3D viewing warning screen when
playing back the 3D compatible video software.
Audio Language
Choose the language for audio.
≥ If “Original” is selected, the original language of each disc
will be selected.
≥ Enter a code (> 46) with the number buttons when you
select “Other ¢¢¢¢”.
Subtitle Language
Choose the language for the subtitle.
≥ If “Automatic” is selected and the language selected for
“Audio Language” is not available, subtitles of that language
will automatically appear if available on that disc.
≥ Enter a code (> 46) with the number buttons when you
select “Other ¢¢¢¢”.
Menu Language
Choose the language for the disc menus.
≥ Enter a code (> 46) with the number buttons when you
select “Other ¢¢¢¢”.
BD-Live Internet Access (> 26)
You can restrict Internet access when BD-Live functions are
used.
≥ If “Allow ( Limited )” is selected, Internet access is permitted
only for BD-Live contents which have content owner
certificates.
Video
Still Mode (paused video)
Select the type of picture shown when you pause playback.
Auto
Automatically selects the type of picture shown.
Field
Select if jittering occurs when “Auto” is selected.
Frame
Select if small text or fine patterns cannot be
seen clearly when “Auto” is selected.
Seamless Play
The chapter segments in playlists are played seamlessly.
≥ Select “On”, when the picture freezes for a moment at the
chapters segment in playlists.
Black Level Control
Select lighter or darker for adjusting the black level control to
the desired setting for picture enhancement.
VQT2W18
36
37 ページ 2010年6月21日 月曜日 午後4時51分
Audio
Display
Dynamic Range Compression
Status Messages
You can listen at low volumes but still hear dialog clearly.
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
≥ “Auto” is effective only when playing Dolby TrueHD.
Choose whether to show status messages automatically.
Digital Audio Output
Press [OK] to show the following settings:
Dolby D/Dolby D +/Dolby TrueHD
DTS/DTS-HD
Select the audio signal to output.
≥ Select “PCM”, when the connected equipment cannot
decode the respective audio format.
≥ Not making the proper settings may result in noise.
BD-Video Secondary Audio
Select whether to mix or not mix the primary audio and
secondary audio (including the button click sound). (> 25)
≥ If “Off” is selected, the unit outputs the primary audio only.
On-screen Language
Choose the language for menus and on-screen messages.
Screen Saver Function
This is to prevent burn-in on the screen.
≥ When this is set to “On”:
If there is no operation for 5 minutes or more, DIRECT
NAVIGATOR screen switches to START menu automatically.
≥ While playing and pausing, etc., this function is not available.
≥ While playing music (CD-DA or MP3), after about 5 minutes
DIRECT NAVIGATOR screen switches to a blank screen
with “Screen Saver” message.
FL Display
Changes the brightness of the unit’s display.
≥ If “Auto” is selected, the display is dimmed but brightens
when you perform some operations.
Digital Audio Input
FL Control (Vol 0)
Press [OK] to show the following settings:
≥ If “On” is selected, the unit’s display will turn off when the
volume is adjusted to “0”.
PCM-FIX
Select the audio signal to input.
≥ “On”: PCM is available.
≥ “Off”: PCM and Dolby Digital are available.
Select “On” if the sound is cut off intermittently.
License
Information about the software used by this unit is displayed.
TV / Device Connection
Downmix
3D Type
Select the downmix system to enjoy multi-channel or
2-channel sound.
≥ Select “Surround encoded” to enjoy the surround sound.
≥ There is no downmix effect on the bitstream audio signal.
≥ The audio will be output in “Stereo” in the following cases:
– AVCHD playback
– Playback of secondary audio (including the button click
sound).
Select the format of the connected TV.
≥ Change the settings for 3D on the TV also when “Checker
board” or “Side by side” is selected.
7.1ch Audio Reformatting
Surround sound with 6.1ch or less is automatically expanded
and played back at 7.1ch.
≥ If “Off” is selected, sound is played over the original number
of channels (Note that in the case of 6.1ch audio, playback
will be at 5.1ch.)
Audio reformatting is enabled in the following cases:
≥ When you have selected “PCM” in “Digital Audio Output”.
≥ When the audio is Dolby Digital, Dolby Digital Plus, Dolby
TrueHD or LPCM.
High Clarity Sound
When connected to TV via the HDMI AV OUT terminal for
outputting image, it produces clearer sound.
≥ Set to “Enable” and then set “High Clarity Sound” on the
Playback menu to “On”. (> 35)
TV Aspect
Set to match the type of television connected.
When connected to a 4:3 aspect television and playing 16:9
ratio image:
4:3
The sides are cut off so the
picture fills the screen.
When playing BD-Video,
video is output as “4:3
Letterbox”.
4:3 Letterbox Black bands appear at the
top and bottom of the
picture.
Advanced operations
SC-BTT750_350P_VQT2W18_eng.book
When connected to a 16:9 widescreen television and playing
4:3 ratio image:
16:9
Video is displayed as a 4:3 ratio image in the
center of the screen.
Audio Delay
Mis-sync between the video and audio is corrected by delaying
the audio output.
Speaker
Refer to page 40
VQT2W18
37
SC-BTT750_350P_VQT2W18_eng.book
38 ページ 2010年6月21日 月曜日 午後4時51分
HDMI Connection
Press [OK] to show the following settings:
HDMI Resolution
The items supported by the connected devices are
indicated on the screen as “¢”. When any item without “¢”
is selected, the images may be distorted.
≥ If “Auto” is selected, automatically selects the output
resolution best suited to the connected television.
≥ To enjoy high-definition video up-converted to 1080p, you
need to connect the unit directly to 1080p compatible
HDTV (High Definition Television). If this unit is connected
to an HDTV through other equipment, it must also be
1080p compatible.
24p Output
When this unit is connected to a TV supporting 1080/24p
output using an HDMI cable, movies and other material
recorded at 24p are output at 24p.
≥ When playing DVD-Video, set to “On” and then also set
“24p” in “Video” (> 35) to “On”.
≥ When BD-Video images other than 24p are played,
images are output at 60p.
Contents Type Flag
Depending on the playback content, the TV will output
adjusting to the optimal method when a TV that supports
this function is connected.
Power Off Link
Select the desired power off link setting of this unit for
VIERA Link operation (> 31). (This works depending on the
settings of the connected VIERA Link “HDAVI Control”
compatible equipment.)
Video/Audio:
When the TV is turned off, this unit will turn off automatically.
Video:
When the TV is turned off, this unit will turn off except during
the following conditions:
jCD or MP3 audio playback
jiPod/iPhone mode
jRadio mode
j“AUX”,“ARC” or “D-IN” (DIGITAL IN) mode
(non-selected TV AUDIO setting for VIERA Link)
j“D-IN” (DIGITAL IN) mode (non-selected CABLE/
SATELLITE AUDIO setting for VIERA Link)
TV Audio Input
HDMI Color Mode
This setting is for selecting color-space conversion of the
image signal when the unit is connected using an HDMI
cable.
HDMI Audio Output
This setting selects whether or not to output audio from
HDMI.
≥ Audio will be output through the system's speakers when
"Off" is selected.
VIERA Link
Set to use “HDAVI Control” function when connected with
an HDMI cable to a device that supports “HDAVI Control”.
≥ Select “Off” when you do not want to use “HDAVI Control”.
Deep Color Output
This setting is for selecting whether to use Deep Color output
when a television that supports Deep Color is connected.
VQT2W18
38
Select the TV audio input to work with the VIERA Link
operations.
SC-BTT750_350P_VQT2W18_eng.book
39 ページ 2010年6月21日 月曜日 午後4時51分
Network
Others
Network Easy Setting (> 19)
Remote Control Code
Network Settings
Change the remote control code, when other Panasonic
products react to this remote control.
Perform network-related settings individually.
Press [OK] to show the following settings:
LAN Connection Mode
Select connection method.
Access Point Connection Setting
This allows the Wireless router (Access point) and
connection settings to be set and the current connection
settings and connection state to be checked when a
wireless connection is used.
Connection Setting
The Wireless router (Access point) connection wizard will
be displayed.
IP Address / DNS Settings
This is for checking the state of the network connection and
setting the IP address and DNS-related.
Press [OK] to show the respective setting.
≥ “Connection Speed Setting” is enabled only when “Auto
Detect Connection Speed” is turned “Off”.
Quick Start*
Speed of startup from power off is increased.
≥ Internal control unit will be powered when it is set to “On”, so
contents of the following will be different from the time it is
set to “Off”.
– Idle power consumption will increase. (about the power
consumption > 48)
* Depending on the power conserving setting activated on
the TV, this function may have less effect when the unit is
started by the power on link function. (> 30)
Easy setup (> 18)
You can execute basic settings to optimize your home theater
system.
Restore Default Settings
This returns all values in the Setup menu and the Playback
menu, except for “Remote Control Code”, “LAN Connection
Mode”, “Access Point Connection Setting”, “IP Address / DNS
Settings”, “Proxy Server Settings”, “Lock”, “DVD-Video
Ratings” and “BD-Video Ratings” etc. to the default settings.
System Information
Proxy Server Settings
This is for checking the state of connection with the Proxy
server and performing settings.
Press [OK] to show the respective setting.
Display the following items:
– Firmware version of this unit
– [BTT750] Wireless LAN module of supplied Wireless LAN
Adaptor
– [BTT350] Wireless LAN module of optional Wireless LAN
Adaptor
Internet Content Settings (> 33) (VIERA CAST)
Press [OK] to show the following settings:
Firmware Update (> 20)
Automatic Update Check
When this equipment remains connected to the Internet, it
will check for the latest firmware version when it is turned on
and you can update it if necessary.
Update Now
You can update the firmware manually.
Advanced operations
Press [OK] to show the following settings:
Lock
You can restrict the usage of VIERA CAST.
≥Follow the on-screen instructions. Enter the 4-digit
password with the number buttons when the password
screen is shown.
Audio Auto Gain Control
Volume that is different depending on the contents is
adjusted automatically to the standard volume while using
the VIERA CAST.
≥Depending on contents, this function effect will not work.
≥Select “Off” when the audio is warped.
Time Zone
By selecting the time zone, it is possible to set the unit’s
time to match your location.
≥Some VIERA CAST contents require the time zone to be
set. Set the time zone if necessary.
DST
Select “On” when using Daylight Saving time.
MAC Address
Displays the MAC address of this unit.
VQT2W18
39
SC-BTT750_350P_VQT2W18_eng.book
40 ページ 2010年6月21日 月曜日 午後4時51分
Speaker settings
B Surround speakers/
Surround back speakers
Delay time
For optimum listening with 5.1-channel sound, all the
speakers, except for the subwoofer, should be the same
distance from the seating position.
If either distance A or B is less than C (> below), find the
difference in the relevant table and adjust the delay time to
make up for the difference.
A
C
C
L
:
B
C
:
C
Setting
5.0 ms
Approx. 340 cm (11 ft. 1 in.)
10.0 ms
Approx. 510 cm (16 ft. 8 in.)
15.0 ms
∫ When using the 7.1ch speaker system
1 Check the distance difference of both the front speakers
and the surround back speakers from the seating position.
2 Set the delay time of the surround back speakers.
R
A
Difference
Approx. 170 cm (5 ft. 6 in.)
SW
B
LS
1
D
RS
LS
Adjusting speaker level
RS
A B C: Primary listening distance
A Approximate room dimensions
B Actual speaker position
C Ideal speaker position
D Circle of constant primary listening distance
Volume (Channel balance) (
Press [3, 4, 2, 1] to select the distance
box ( ms
0.0 ) and press [OK].
2

L
C
Complete
1

ms
0.0
Select “Test” and press [OK].
A test signal is output.
While listening to the test signal
Press [3, 4] to adjust the volume of each
speaker.
The volume can be adjusted between r6 dB to s6 dB.
≥ Set each speaker level according to the volume of the
Front (L) and Front (R) speaker volume respectively.
R
dB
0
Test
dB
0
dB
0
3
SW
Press [OK].
The test signal stops.
dB
0

e.g., 5.1ch setting
LS
RS
ms
0.0
L
A Center (C)
B Left Surround (LS), Right Surround (RS)


e.g., 7.1ch setting
L
C
Complete
dB
0
Test
dB
0
dB
0
ms
0.0

LB
40
SW
dB
0
RS
RS
dB
0
ms
0.0
dB
0
To finish the speaker setting
Press [3, 4, 2, 1] to select “Complete” and press [OK].
RB
Press [3, 4] to select the setting and press
[OK].
A Center speaker
VQT2W18
ms
0.0
R
A Center (C)
B Test
C Left Surround (LS), Right Surround (RS)
SW
C Left Surround back (LB), Right Surround back (RB)
2
dB
0
Test
dB
0
dB
0
R
dB
0
LS
C
Complete
LS
ms
0.0
)
(Effective when playing multi-channel audio)
e.g., 5.1ch setting
ms
0.0
dB
0
Difference
Setting
Approx. 34 cm (1 ft. 1 in.)
1.0 ms
Approx. 68 cm (2 ft. 2 in.)
2.0 ms
Approx. 102 cm (3 ft. 4 in.)
3.0 ms
Approx. 136 cm (4 ft. 5 in.)
4.0 ms
Approx. 170 cm (5 ft. 6 in.)
5.0 ms
SC-BTT750_350P_VQT2W18_eng.book
41 ページ 2010年6月21日 月曜日 午後4時51分
Optional speaker settings
Speaker installation
option
[BTT750]
Center speaker

Attaching to a wall
≥ The wall or pillar on which the speakers are to be attached
should be capable of supporting 10 kg (22 lbs) per screw.
Consult a qualified building contractor when attaching the
speakers to a wall. Improper attachment may result in
damage to the wall and speakers.
≥ Do not attempt to attach these speakers to walls using
methods other than those described in this manual.
1

[BTT350]
Center speaker

Drive a screw (not supplied) into the wall.



2


You can attach all of the speakers (except subwoofer) to a wall.


A At least 30 mm (1 3/16q)
B ‰ 4.0 mm (5/32q)
C ‰ 7.0 mm to ‰ 9.4 mm
(9/32q to 3/8q)
D Wall or pillar
E 5.5 mm to 7.5 mm (7/32q to 5/16q)
Fit the speaker securely onto the screw(s)
with the hole(s).
e.g., [BTT750] Front speaker
DO NOT
DO

I
J
K
L
M
N
117 mm (4 19/32q)
209 mm to 211 mm (8 7/32q to 8 5/16q)
97 mm (3 13/16q)
18.8 mm (3/4q)
17 mm (21/32q)
99 mm to 101 mm (3 29/32q to 3 31/32q)
∫ To avoid speaker dropping
[BTT750]: Front speaker, Center speaker
e.g., [BTT750] Front speaker
≥ Move the speaker so
that the screw is in this
position.

[BTT750]
Front speaker
Attach to a wall without the base and the stand.



A
B
C
D
String (not supplied)
Screw eye (not supplied)
Less than 10 cm (3 15/16q)
Rear of the speaker
≥ Consult a qualified building contractor to avoid damage to
the wall or speakers.
≥ Use a string of less than ‰ 2.0 mm (3/32q), which is capable of
supporting over 10 kg (22 lbs).

[BTT750]:
Surround speaker
[BTT350]:
Front speaker and
Surround speaker
Advanced operations

Optional speaker
settings
≥ In this position, the
speaker will likely fall if
moved to the left or right.

F 97 mm (3 13/16q)
G 210 mm to 212 mm (8 9/32q to 8 11/32q)
H 26 mm (1 1/32q)
VQT2W18
41
SC-BTT750_350P_VQT2W18_eng.book
42 ページ 2010年6月21日 月曜日 午後4時51分
Reference
Troubleshooting guide
Before requesting service, please perform the
following steps.
Do you have the latest firmware installed?
Firmware updates may be released to correct operating
irregularities that are discovered with certain movies.
(> 20)
4
Make the following checks and visit our
website for more information.
http://www2.panasonic.com/consumer-electronics/support/
Enter the model number.
4
Even so, you still have trouble,
Visit our website to find a service center.
You can find a service center near you easily on our
website.
Other support information:
“Customer Services Directory (United States and Puerto
Rico)” (> 51)
The following do not indicate a problem with this unit:
≥ Regular disc rotating sounds.
≥ Image disturbance during search.
≥ Image disturbance when replacing 3D discs.
∫ Unit does not respond to the remote control
or front panel buttons.
Press and hold [POWER Í/I] on the main unit for 5 seconds.
jIf still unable to power the unit off, disconnect the power cord,
wait 1 minute, then reconnect the power cord.
∫ Cannot eject disc.
The unit may have a problem.
While the unit is off, press and hold [SKIP9] on the remote
control and [< OPEN/CLOSE] on the unit at the same time for
more than 5 seconds.
General operation
To return to the factory preset
≥ Select “Yes” in “Restore Default Settings” in the Setup menu.
(> 39)
To return all settings to the factory preset
≥ Reset the unit as follows:
While the unit is off, press and hold [+ VOLUME], [< OPEN/
CLOSE] and [POWER Í/I] on the main unit at the same
time for more than 5 seconds.
The remote control doesn’t work properly.
≥ The remote control and main unit are using different codes.
Change the code on the remote control. (> 21)
≥ It may be necessary to set the code of the remote control
again after changing the batteries for the remote control.
(> 21)
Disc cannot be played.
≥ The disc is dirty. (> 9)
≥ Check the region code.
VQT2W18
42
Still pictures (JPEG) do not playback normally.
≥ The images that were edited on the PC, such as Progressive
JPEG, etc., may not playback.
The TV tuner mode is not displayed when the TV is
switched on.
≥ This phenomenon may occur, depending on the TV setting,
when “Quick Start” is set to “On”.
≥ Depending on the TV, this phenomenon may be prevented
by reconnecting the HDMI cable to a different HDMI input
terminal or by changing the HDMI auto connection setting.
You have forgotten your ratings password.
You want to cancel the ratings level.
While the disc tray is empty and “BD/DVD” is selected as a
source, press and hold [SKIP:] on the remote control and
[1] (Play) on the unit at the same time for more than 5
seconds. The ratings level returns to the factory preset.
Power
No power.
≥ Insert the AC power supply cord securely into a household
AC outlet. (> 18)
The unit switches to standby mode.
≥ This unit will automatically turn to standby mode after 30
minutes if it is inactive. (> 7)
≥ When the time set for the sleep timer has passed, the power
will be turned off. (> 6)
≥ One of the unit’s safety devices is activated. Press
[POWER Í/I] on the main unit to turn the unit on.
Power of this unit is turned off when the input for the TV is
changed.
≥ This is a normal phenomenon when using VIERA Link
(HDAVI Control 4 or later). For details please read the
operating instructions for the TV.
Displays
The display is dim.
≥ Change “FL Display” in the Setup menu. (> 37)
TV screen and video
The images from this unit do not appear on the TV.
Picture is distorted.
Jittering occurs.
≥ An incorrect resolution is selected in “HDMI Resolution”.
Reset the setting as follows:
While the disc tray is empty and “BD/DVD” is selected as a
source, press and hold [1] (Play) and [∫] (Stop) on the main
unit at the same time for more than 5 seconds to cancel the
setting.
≥ When Dolby Digital Plus, Dolby TrueHD, and DTS-HD audio
are not output in bitstream, select “Yes” in “Restore Default
Settings” and make proper settings. (> 39)
≥ When “Playback Method for 3D Disc” in the Setup menu is
set to “3D Playback”, images may not output depending on
the connection method. Remove the disc from this unit and
select “2D Playback”.(> 36)
Video is not output.
≥ Set the “High Clarity Sound” in the Playback menu to “Off” to
use the VIDEO OUT terminal. (> 35)
Video is not output in high-definition.
≥ Confirm that “HDMI Resolution” in the Setup menu is set
properly. (> 38)
43 ページ 2010年6月21日 月曜日 午後4時51分
3D video is not output.
≥ Are the settings on this unit and the TV correct? (> 26)
3D video is not output correctly as 2D.
≥ Is the “Playback Method for 3D Disc” set to “2D Playback”?
(> 36)
≥ Discs that have recorded titles with Side by side (2 screen
structure) which can be enjoyed in 3D are played back in
accordance with the settings of the TV.
No subtitles.
≥ When progressive output is on, closed captions/subtitles
cannot be displayed.
The subtitles overlap closed captions recorded on discs.
≥ Turn off the subtitles or turn off the closed caption setting on
the TV. (> 34)
A black band is displayed around the edge of the screen.
The aspect ratio of the screen is abnormal.
≥ Confirm the “TV Aspect” is set properly. (> 37)
≥ Adjust the aspect setting on the television.
(Adjustment using “Screen Aspect” (> 25) on the unit is also
possible.)
Sound
No sound.
Low volume.
Distorted sound.
Cannot hear the desired audio type.
≥ Check connections to speakers and other equipment. (> 10,
11,13s18)
≥ Ensure the speaker settings for your speakers are correct.
(> 40)
≥ To output audio from a device connected with an HDMI cable,
set “HDMI Audio Output” to “On” in the Setup menu. (> 38)
≥When “BD-Video Secondary Audio” is set to “On”, Dolby
TrueHD, Dolby Digital Plus, DTS-HD Master Audio and
DTS-HD High Resolution Audio are output as Dolby Digital or
DTS Digital Surround.
≥ Re-master will not work when the bitstream signal is output
from the HDMI AV OUT terminal. (> 35)
≥ Depending on the connected equipment, the sound may be
distorted if this unit is connected with an HDMI cable.
≥ The multi-channel audio from a device connected to the TV
is not output in it’s original multi-channel form.
jIf the device has an optical audio output terminal, connect
the device to this unit’s “OPTICAL” terminal. (> 15, 29)
No surround sound.
≥ Press [SURROUND] to select a surround effect. (> 23)
≥ (When using the 7.1ch speaker system)
Audio is not available from the surround back speakers even
though Dolby Pro Logic II turns on.
Cannot switch audio.
≥ When audio is output from the HDMI AV OUT terminal, set
“Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” to
“PCM”. (> 37)
No sound from the TV.
≥ Press [EXT-IN] to select the corresponding source. (> 22)
≥ The ARC (Audio Return Channel) function is not available.
Instead, use an optical digital audio cable or an audio cable
to have the TV sound. (> 14, 15)
≥ If the TV is not ARC compatible and only the HDMI
connection is used, an extra audio connection is necessary
(> 14, 15).
iPod/iPhone operation
Cannot charge or operate.
≥ Check that the iPod/iPhone is connected firmly. (> 32)
≥ The battery of the iPod/iPhone is depleted. Charge the iPod/
iPhone, and then operate again.
Cannot display iPod/iPhone videos/photos on the TV.
≥ Make sure that TV is connected to the VIDEO OUT terminal
on this unit. (> 14)
≥ Operate the iPod/iPhone menu to make the appropriate
video/photo output settings for your TV. (Refer to operating
instructions for your iPod/iPhone.)
The TV input channel unintentionally changes to HDMI
input.
≥ When the main unit is connected with an “HDAVI Control”
compatible TV and VIDEO IN is selected for iPod/iPhone
video or photo playback, the TV input channel will
automatically change to the HDMI input channel when
[START] is pressed.
jRe-select the TV’s VIDEO IN input channel.
Radio
Distorted sound or noise is heard.
≥ Adjust the position of the antenna.
≥ Use an outdoor antenna. (> 13)
A beat sound is heard.
≥ Try to keep a certain amount of distance between the
antenna and the TV.
Network
I can’t connect to the network.
≥ Confirm the network connection and settings. (> 16, 39)
≥ Check the operating instructions for each device and
connect accordingly.
Other difficulties with playback
BD-Video or DVD-Video is not played.
≥ Ensure the disc is for the correct BD-Video region code or
DVD-Video region number, and is not defective. (> 8)
≥ You have set a ratings level to limit BD-Video or DVD-Video
play. Change this setting. (> 36)
≥ Some BD-Video can only be output with HDMI.
I cannot play back BD-Live.
≥ The SD card is write-protected. (> 9)
≥ Confirm that this unit is connected to the broadband Internet.
(> 16)
≥ Confirm the “BD-Live Internet Access” settings. (> 36)
≥ Confirm an SD Card is inserted into the SD Card slot. (> 21)
Alternative soundtrack and subtitles cannot be selected.
≥ The languages are not recorded on the disc.
≥ You may not be able to use the playback menu to change the
soundtrack and subtitles on some discs. Use the disc’s
menus to make changes. (> 24)
Angle cannot be changed.
≥ Angles can only be changed during scenes where different
angles are recorded.
Reference
SC-BTT750_350P_VQT2W18_eng.book
VQT2W18
43
SC-BTT750_350P_VQT2W18_eng.book
44 ページ 2010年6月21日 月曜日 午後4時51分
Messages
The following messages or service numbers appear on the
television or unit’s display when something unusual is detected
during startup and use.
On the television
Cannot play.
≥ You inserted an incompatible disc. (Discs recorded in PAL
video, etc.)
Cannot display on this unit.
≥ You tried to play a non-compatible image.
No disc is inserted.
≥ The disc may be upside down.
$ This operation is not available.
≥ Some operations are unsupported by the unit. For example;
jBD-Video: During playback, reverse slow-motion or
reverse frame-by-frame is not possible.
IP address is not set.
≥ The “IP Address” in “IP Address / DNS Settings” is “---. ---.
---. ---”. Set the “IP Address”, “Subnet Mask”, and “Default
Gateway”. (Select the automatic address acquisition if
necessary.)
No Video
≥ Depending on the connected iPod/iPhone, video menu may
not be available on the TV. Select “ALL” on the unit’s display
and operate video playback from your iPod/iPhone menu.
(> 32)
On the unit’s display
F99
≥ The unit fails to operate properly. Press [POWER Í/I] on the
main unit to switch the unit to standby for 3 seconds. Now
press [POWER Í/I] on the main unit again to turn the unit
on.
U59
≥ The unit is hot.
The unit switches to standby for safety reasons. Wait for
about 30 minutes until the message disappears.
Select a position with good ventilation when installing the
unit. Do not block the ventilation hole on the rear and side of
the unit.
U72
U73
≥ The HDMI connection acts unusually.
jTurn the unit and TV off.
jDisconnect the HDMI cable between the player and the
TV.
HDMI ONLY
≥ Some BD-Video discs can only be output with HDMI.
NET
≥ Displays while VIERA CAST is starting up.
No PLAY
≥ There is a viewing restriction on a BD-Video or DVD-Video.
(> 36)
VQT2W18
44
No READ
≥ The media is dirty or badly scratched. The unit cannot play.
PLEASE WAIT
≥ The unit is carrying out an internal process.This is not a
malfunction. You cannot operate the unit while “PLEASE
WAIT” is displayed.
SET 
(“ ” stands for a number.)
≥ The remote control and main unit are using different codes.
Change the code on the remote control. (> 21)
H or F
(“ ” stands for a number.)
≥ Check and correct the speaker cable connections.
≥ There is something unusual.
≥ Check the unit using the troubleshooting guide. If the service
number does not disappear, do the following.
1 Disconnect the plug from the household AC outlet, wait a
few seconds, then reconnect it.
2 Press [POWER Í/I] to turn the power on.
If the service number does not disappear despite doing the
above, request service from the dealer. Inform the dealer of
the service number when requesting service.
UPD/
(“ ” stands for a number.)
≥ The firmware is being updated. Please do not turn off power.
IPOD OVER CURRENT ERROR
≥ The iPod/iPhone is drawing too much power. Remove the
iPod/iPhone, and turn the unit off and on again.
START
≥ The system is being restarted during the firmware update.
Please do not turn off power.
FINISH
≥ The firmware update is completed.
NOT CONDITIONAL
≥ The requested operation cannot be conducted.
SC-BTT750_350P_VQT2W18_eng.book
45 ページ 2010年6月21日 月曜日 午後4時51分
About MP3/JPEG/
AVCHD/MPEG2 files
You can play files on this unit by structure of folders as
shown below. However depending on the method of
writing data (writing software), play may not be in the
order you numbered the folders.
MP3
File format
MP3
Extension
Files must have the extension “.mp3” or
“.MP3”.
Compression
rate
32 kbps to 320 kbps
Sampling rate 44.1 kHz/48 kHz
Reference
Structure of folders that can be
played in this unit
ID3 tags: version 1, 2.2, 2.3, 2.4
(Only titles and the names of artists)
JPEG
File format
JPEG
Extension
Files must have the extension “.jpg” or
“.JPG”.
Picture
resolution
between 34k34 and 8192k8192 pixels
(sub sampling is 4:2:2 or 4:2:0)
Reference
JPEG conforming DCF* is supported.
≥ MOTION JPEG and Progressive JPEG is
not supported
Folder which can be displayed with this unit
¢¢¢: Numbers
XXX: Letters
*1
*2
*3
¢¢¢: from 001 to 999
¢¢¢: from 100 to 999
XXXXX: 5 figures
¢¢¢¢: from 0001 to 9999
XXXX: 4 figures
Structures of still picture (JPEG) folders
in DVD-R*4/DVD-R DL*4/CD-R*5/CD-RW*5
Files inside a folder are displayed in the order they were
updated or taken.
Root
e.g.,
P0000001.jpg
P0000002.jpg
Folder A
P0000003.jpg
P0000004.jpg
P0000005.jpg
Folder B
P0000006.jpg
P0000007.jpg
P0000008.jpg
P0000009.jpg
Folder C
AVCHD
P0000010.jpg
P0000011.jpg
P0000012.jpg
in BD-RE*6/DVD-RAM*4
≥ Folder structure is not displayed.
Root
e.g.,
P0000001.jpg
P0000002.jpg
JPEG
DCIM
File format
AVCHD format (V1.0) used on High
Definition Video Camera
(Panasonic and some others)
Codec
MPEG-4 AVC/H.264
XXXXX *2
XXXX.jpg*3
DCIM
XXXXX *2
XXXX.jpg*3
≥ Discs must conform to UDF 2.5.
MPEG2
in SD card*4
Displays JPEG files in all folders.
≥ Folder structure is not displayed.
e.g.,
Root
File format
Codec
SD-Video format* used on Standard
Definition Video Camera
(Panasonic and some others)
MPEG2
* SD-Video Entertainment Video Profile
≥ With certain recording states and folder structures, the play order may
differ or playback may not be possible.
≥ CD-R, CD-RW : ISO9660 level 1 or 2 (except for extended formats), Joliet
This unit is compatible with multi-session.
This unit is not compatible with packet writing.
≥ DVD-R, DVD-R DL (except for AVCHD) : ISO9660 level 1 or 2 (except for
extended formats), Joliet, UDF bridge (UDF 1.02/ISO9660)
This unit is not compatible with multi-session.
This unit is not compatible with packet writing.
*1
P0000001.jpg
P0000002.jpg
DCIM
XXXXX *2
XXXX.jpg*3
Folder A
P0000003.jpg
P0000004.jpg
Reference
* Design rule for Camera File system: unified standard
established by Japan Electronics and Information
Technology Industries Association (JEITA).
≥ DVD-RAM must conform to UDF 2.0.
≥ BD-RE must conform to UDF 2.5.
VQT2W18
45
SC-BTT750_350P_VQT2W18_eng.book
46 ページ 2010年6月21日 月曜日 午後4時51分
Structure of MP3 folders
in DVD-R/DVD-R DL/CD-R/CD-RW
Prefix the file names with 3-digit numbers in the order you
want to play them.
e.g.,
Root
001XXXX.mp3
002XXXX.mp3
001
Folder A
003XXXX.mp3
004XXXX.mp3
005XXXX.mp3
Folder B
006XXXX.mp3
007XXXX.mp3
008XXXX.mp3
009XXXX.mp3
Folder C
010XXXX.mp3
011XXXX.mp3
012XXXX.mp3
*4
*5
*6
The total combined maximum number of recognizable picture contents
and folders: 3000 picture contents and 300 folders.
The total combined maximum number of recognizable picture contents
and folders: 999 picture contents and 99 folders.
The total combined maximum number of recognizable picture contents
and folders: 9999 picture contents and 300 folders.
Supplemental
information
∫ Display languages list
Display Language Display Language Display Language
ENG
FRA
DEU
ITA
ESP
NLD
SVE
NOR
DAN
POR
RUS
English
French
German
Italian
Spanish
Dutch
Swedish
Norwegian
Danish
Portuguese
Russian
JPN
CHI
KOR
MAL
VIE
THA
POL
CES
SLK
HUN
FIN
Japanese
Chinese
Korean
Malay
Vietnamese
Thai
Polish
Czech
Slovak
Hungarian
Finnish
ARA
HIN
PER
IND
MRI
BUL
RUM
GRE
TUR
Arabic
Hindi
Persian
Indonesian
Maori
Bulgarian
Romanian
Greek
Turkish
Others
∫ Video attribute
Display
Meaning
MPEG-2/MPEG-4 AVC/VC-1
Video recording method
∫ Audio attribute
Display
LPCM/
Digital/
Meaning
Digital+/
TrueHD/DTS/DTS-ES Mtrx/
DTS-ES Dscrt/DTS 96/DTS 96 ES Mtrx/
DTS-HD HI RES/DTS-HD MSTR/MPEG
ch (channel)
k (kHz)
b (bit)
Signal type
Number of channels
Sampling frequency
Number of bits
∫ Language code list
VQT2W18
46
Language Code
Language
Abkhazian
6566
Afar:
6565
Afrikaans:
6570
Albanian:
8381
Amharic:
6577
Arabic:
6582
Armenian:
7289
Assamese:
6583
Aymara:
6589
Azerbaijani:
6590
Bashkir:
6665
Basque:
6985
Bengali; Bangla:
6678
Bhutani:
6890
Bihari:
6672
Breton:
6682
Bulgarian:
6671
Burmese:
7789
Byelorussian: 6669
Cambodian:
7577
Catalan:
6765
Chinese:
9072
Corsican:
6779
Croatian:
7282
Czech:
6783
Danish:
6865
Dutch:
7876
English:
6978
Esperanto:
6979
Estonian:
6984
Faroese:
7079
Fiji:
7074
Finnish:
7073
French:
7082
Frisian:
7089
Galician:
7176
Georgian:
7565
German:
6869
Greek:
6976
Greenlandic:
7576
Guarani:
7178
Gujarati:
Hausa:
Hebrew:
Hindi:
Hungarian:
Icelandic:
Indonesian:
Interlingua:
Irish:
Italian:
Japanese:
Javanese:
Kannada:
Kashmiri:
Kazakh:
Kirghiz:
Korean:
Kurdish:
Laotian:
Latin:
Latvian, Lettish:
Lingala:
Lithuanian:
Macedonian:
Malagasy:
Malay:
Malayalam:
Maltese:
Maori:
Marathi:
Moldavian:
Mongolian:
Nauru:
Nepali:
Norwegian:
Oriya:
Pashto, Pushto:
Persian:
Polish:
Portuguese:
Punjabi:
Quechua:
Code Language Code
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8083
7065
8076
8084
8065
8185
Rhaeto-Romance:
8277
Romanian:
8279
Russian:
8285
Samoan:
8377
Sanskrit:
8365
Scots Gaelic:
7168
Serbian:
8382
Serbo-Croatian: 8372
Shona:
8378
Sindhi:
8368
Singhalese:
8373
Slovak:
8375
Slovenian:
8376
Somali:
8379
Spanish:
6983
Sundanese:
8385
Swahili:
8387
Swedish:
8386
Tagalog:
8476
Tajik:
8471
Tamil:
8465
Tatar:
8484
Telugu:
8469
Thai:
8472
Tibetan:
6679
Tigrinya:
8473
Tonga:
8479
Turkish:
8482
Turkmen:
8475
Twi:
8487
Ukrainian:
8575
Urdu:
8582
Uzbek:
8590
Vietnamese:
8673
Volapük:
8679
Welsh:
6789
Wolof:
8779
Xhosa:
8872
Yiddish:
7473
Yoruba:
8979
Zulu:
9085
SC-BTT750_350P_VQT2W18_eng.book
47 ページ 2010年6月21日 月曜日 午後4時51分
Glossary
BD-J
Some BD-Video discs contain Java applications, and these
applications are called BD-J. You can enjoy various interactive
features in addition to playing normal video.
Bitstream
This is the digital form of multi-channel audio data (e.g., 5.1
channel) before it is decoded into its various channels.
Deep Color
Deep Color is a name for the device that can reproduce
greater color gradation (4096 steps) when connected to a TV
that supports the Deep Color with an HDMI cable. You can
enjoy exceptionally rich, natural-looking colors, with smooth,
detailed gradation and minimal color banding. [A lower color
gradation (256 steps), without Deep Color, will be reproduced if
connected to a TV which does not support Deep Color. The
unit will automatically set appropriate output to suit the
connected TV.]
Dolby Digital
This is a method of coding digital signals developed by Dolby
Laboratories. Apart from stereo (2-channel) audio, these
signals can also be multi-channel audio.
Dolby Digital Plus
Multi-channel audio and higher audio quality is made possible
using Dolby Digital Plus. BD-Video supports up to 7.1 channel
output.
Dolby Pro Logic II
Dolby Pro Logic II enables you to play stereo sources on 5.1
channel.
Dolby TrueHD
Dolby TrueHD is a very high quality audio format that
reproduces the studio master audio. BD-Video supports up to
7.1 channel output.
Down-mixing
This is the process of remixing the multi-channel audio found
on some discs into fewer channels.
DTS (Digital Theater Systems)
This surround system is used in many movie theaters. There is
good separation between the channels, so realistic sound
effects are possible.
DTS-HD
DTS-HD is a high-quality, sophisticated audio format used in
movie theaters. Previous DTS Digital Surround-compatible
equipment can play DTS-HD as DTS Digital Surround audio.
BD-Video supports up to 7.1 channel output.
DTS-HD High Resolution Audio
This is a signal format achieved by improving the previous
DTS, DTS-ES and DTS 96/24 formats. It is compatible with
sampling frequency 96 kHz/48 kHz. BD-Video supports up to
7.1 channel output.
DTS-HD Master Audio | Essential
This is a lossless audio format and compatible with 96 kHz/
7.1 ch and 192 kHz/2 ch or less. In addition, faithful
reproduction of the master audio is enabled using lossless
audio encoding technology. BD-Video supports up to
7.1 channel output.
Dynamic range
Dynamic range is the difference between the lowest level of
sound that can be heard above the noise of the equipment and
the highest level of sound before distortion occurs.
Dynamic range compression means reducing the gap between
the loudest and softest sounds. This means you can listen at
low volumes but still hear dialog clearly.
HDMI (High-Definition Multimedia Interface)
HDMI is a digital interface for consumer electronic products.
Unlike conventional connections, it transmits uncompressed
digital video and audio signals on a single cable.
Local storage
This storage area is used as a destination for sub contents for
playing BD-Live on BD-Video.
LPCM (Linear PCM)
These are a kind of PCM format.
These are uncompressed digital signals, similar to those found
on CDs.
PCM (Pulse Code Modulation)
This is one format for converting analog audio into digital
audio, enabling you to enjoy digital audio with no hassle.
P4HD (Pixel Precision Progressive Processing for HD)
This is a processor which makes use of an exclusive
Panasonic algorithm. Various processing is supported,
including a high-level conversion of the TV scanning format
from interlace to progressive and a high-level conversion of
standard resolution (480i or 576i) video signal to a 1080 HighDefinition video signal.
Consequently, this unit is able to provide video of optimal
resolution to the connected TV.
x.v.ColorTM
x.v.ColorTM is a name for devices that are compatible with the
xvYCC format, an international standard for expanded color in
motion pictures, and that follow the rules for signal
transmission.
You can enjoy vivid colors of wider color ranges for a more
realistic picture when connected to a TV that supports the
x.v.ColorTM with HDMI cable.
24p
This is a progressive image recorded at a rate of 24 frames per
second (motion-picture film). Many BD-Video movie contents
are recorded in 24 frames/second in accordance with the film
materials.
Reference
AVCHD
AVCHD is a new format (standard) for high-definition video
cameras that can be used to record and play high-resolution
HD images.
VQT2W18
47
SC-BTT750_350P_VQT2W18_eng.book
48 ページ 2010年6月21日 月曜日 午後4時51分
Specifications
GENERAL
Power consumption:
FM TUNER SECTION
90 W
Power consumption in standby mode:
Approx. 0.05 W
Power supply:
iPod/iPhone Connector:
WIRELESS LAN Connector:
Dimensions (WkHkD):
Mass (Weight):
Operating temperature
range:
Operating humidity range:
DC OUT 5 V 500 mA MAX
DC OUT 5 V 500 mA
430 mmk62 mmk287 mm
(1615/16qk27/16qk115/16q)
Approx. 3.5 kg (7.71 lbs)
(Dimensions and Weight do not
include speakers)
0 oC to 40 oC
(32 oF to 104 oF)
35 % to 80 % RH
(no condensation)
RMS TTL POWER OUTPUT:
1000 W
1 kHz, 10 % total harmonic distortion
FRONT:
125 W per ch (3 ≠)
CENTER:
250 W per ch (6 ≠)
SURROUND:
125 W per ch (3 ≠)
100 Hz, 10 % total harmonic distortion
SUBWOOFER:
250 W per ch (6 ≠)
FTC TTL POWER OUTPUT:
446 W
120 Hz to 20 kHz, 1.0 % total harmonic distortion
FRONT:
60 W per ch (3 ≠)
CENTER:
106 W per ch (6 ≠)
SURROUND:
60 W per ch (3 ≠)
45 Hz to 120 Hz, 1.0 % total harmonic distortion
SUBWOOFER:
100 W per ch (6 ≠)
48
Antenna terminals:
30 stations
87.9 MHz to 107.9 MHz (200 kHz step),
87.5 MHz to 108.0 MHz (100 kHz step)
75 ≠ (unbalanced)
AC 120 V, 60 Hz
AMPLIFIER SECTION
VQT2W18
Preset memory:
Frequency range:
Audio Input
AUX:
k1
Digital Audio Input
Optical:
Sampling frequency:
Audio Format:
k1
32 kHz, 44.1 kHz, 48 kHz
PCM, Dolby Digital
SPEAKER SECTION
FRONT SPEAKERS
[BTT750] SB-HF730
Type:
Woofer:
Tweeter:
Impedance:
Output sound pressure:
Frequency range:
Dimensions (WkHkD):
Mass (Weight):
2 WAY 3 SPEAKER Bass-ref.
3.5 cm k 10 cm (13/8qk4q) CONE
TYPEk 2
2.5 cm (1q) SEMI-DOME TYPE
3≠
78 dB/W (1 m)
100 Hz to 30 kHz (j16 dB),
130 Hz to 25 kHz (j10 dB)
255 mmk1024 mmk255 mm
(101/16qk4011/32qk101/16q)
Approx. 2.3 kg (5.07 lbs)
[BTT350] SB-HF230
Type:
Full range:
Impedance:
Output sound pressure:
Frequency range:
Dimensions (WkHkD):
Mass (Weight):
1 WAY 1 SPEAKER Bass-ref.
6.5 cm (21/2q) CONE TYPE
3≠
78 dB/W (1 m)
105 Hz to 25 kHz (j16 dB),
130 Hz to 22 kHz (j10 dB)
80 mmk118.5 mmk68 mm
(35/32qk411/16qk211/16q)
Approx. 0.4 kg (0.88 lbs)
SC-BTT750_350P_VQT2W18_eng.book
Tweeter:
Impedance:
Output sound pressure:
Frequency range:
Dimensions (WkHkD):
Mass (Weight):
TERMINAL SECTION
2 WAY 3 SPEAKER Bass-ref.
3.5 cm k 10 cm (13/8qk4q) CONE
TYPEk 2
2.5 cm (1q) SEMI-DOME TYPE
6≠
78 dB/W (1 m)
100 Hz to 30 kHz (j16 dB),
130 Hz to 25 kHz (j10 dB)
424 mmk59 mmk76 mm
(1623/32qk211/32qk3q)
Approx. 1.06 kg (2.34 lbs)
[BTT350] SB-HC480
Type:
Full range:
Impedance:
Output sound pressure:
Frequency range:
Dimensions (WkHkD):
Mass (Weight):
SURROUND SPEAKERS
[BTT750] [BTT350] SB-HS230
Type:
Full range:
Impedance:
Output sound pressure:
Frequency range:
Dimensions (WkHkD):
Mass (Weight):
SUBWOOFER
[BTT750] SB-HW330
Type:
Woofer:
Passive radiator:
Impedance:
Output sound pressure:
Frequency range:
Dimensions (WkHkD):
Mass (Weight):
1 WAY 1 SPEAKER Bass-ref.
6.5 cm (21/2q) CONE TYPE
6≠
79 dB/W (1 m)
90 Hz to 25 kHz (j16 dB),
115 Hz to 22 kHz (j10 dB)
145 mmk85 mmk71.5 mm
(523/32qk311/32qk213/16q)
Approx. 0.6 kg (1.32 lbs)
1 WAY 1 SPEAKER Bass-ref.
6.5 cm (21/2q) CONE TYPE
3≠
78 dB/W (1 m)
105 Hz to 25 kHz (j16 dB),
130 Hz to 22 kHz (j10 dB)
80 mmk118.5 mmk68 mm
(35/32qk411/16qk211/16q)
Approx. 0.4 kg (0.88 lbs)
Dimensions (WkHkD):
Mass (Weight):
Ethernet:
SD card slot:
1 WAY 1 SPEAKER Bass- ref.
16 cm (61/2q) CONE TYPE
6≠
78 dB/W (1 m)
40 Hz to 220 Hz (j16 dB),
45 Hz to 180 Hz (j10 dB)
145 mmk289.5 mmk258 mm
(523/32qk1113/32qk105/32q)
Approx. 2.8 kg (6.17 lbs)
USB 2.0 (Use for Wireless LAN
Adaptor only) 1 system
10BASE-T/100BASE-TX 1 system
Connector: 1 system
[BTT750] Wireless LAN Adaptor (DY-WL10)
Power supply:
Power consumption:
Dimensions (WkHkD):
DC 5 V (USB powered) 500 mA
Max 2500 mW
44 mmk27 mmk72 mm
(13/4zk11/8zk27/8z)
Approx. 29 g (1.02 oz)
Tx 1, Rx 2
USB 2.0
Mass (Weight):
Antenna:
Interface:
Standard Compliance:
IEEE802.11n / IEEE802.11a / IEEE802.11g / IEEE802.11b
Transmission system:
MISO-OFDM system, OFDM system, DSSS system
Frequency Range:
IEEE802.11n / IEEE802.11a:
5.15 GHz - 5.35 GHz
5.47 GHz - 5.825 GHz
IEEE802.11g / IEEE802.11b / IEEE802.11n:
2.4 GHz - 2.4835 GHz
Transfer rate (standard)*1:
IEEE802.11n: Tx Max. 150 Mbps, Rx Max. 300 Mbps
IEEE802.11g / IEEE802.11a: Max. 54 Mbps
IEEE802.11b: Max. 11 Mbps
Access Mode:
Infrastructure mode
Security*2:
WPA2-PSK (TKIP/AES)
WPA-PSK (TKIP/AES)
WEP (64 bit / 128 bit)
*1
1 WAY 1 SPEAKER (Kelton type)
16 cm (61/2q) CONE TYPE
25 cm (10q)
6≠
78 dB/W (1 m)
35 Hz to 180 Hz (j16 dB),
40 Hz to 160 Hz (j10 dB)
180.5 mmk322 mmk351 mm
(71/8qk1211/16qk1313/16q)
Approx. 4.6 kg (10.1 lbs)
[BTT350] SB-HW480
Type:
Woofer:
Impedance:
Output sound pressure:
Frequency range:
USB:
*2
Transfer rates are theoretical values; however, actual communication
rate will vary according to communication environment or connected
equipment.
This unit supports WPA and WPA2 encryption.
VIDEO SECTION
Signal system:
Video output
Output level:
Output connector:
HDMI AV output
Output format:
Output connector:
LASER Specification:
Class I LASER Product
Wave length:
Laser power:
NTSC
1.0 Vp-p (75 ≠)
Pin jack (1 system)
1080p/1080i/720p/480p
Type A (19 pin)
HDMI (with 3D, ARC, Content Type)
This unit supports “HDAVI Control
5” function.
790 nm (CDs)/655 nm (DVDs)/405
nm (BDs)
No hazardous radiation is emitted
with the safety protection
Specifications are subject to change without notice.
Reference
CENTER SPEAKER
[BTT750] SB-HC730
Type:
Woofer:
49 ページ 2010年6月21日 月曜日 午後4時51分
VQT2W18
49
SC-BTT750_350P_VQT2W18_eng.book
50 ページ 2010年6月21日 月曜日 午後4時51分
Java and all Java-based trademarks and logos are trademarks or
registered trademarks of Sun Microsystems, Inc. in the United States and
other countries.
Manufactured under license from Dolby Laboratories. Dolby, Pro Logic,
and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674;
5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,392,195; 7,272,567;
7,333,929; 7,212,872 & other U.S. and worldwide patents issued &
pending.
DTS and the Symbol are registered trademarks, & DTS-HD, DTS-HD
Master Audio | Essential and the DTS logos are trademarks of DTS, Inc.
Product includes software.
© DTS, Inc. All Rights Reserved.
This item incorporates copy protection technology that is protected by U.S.
patents and other intellectual property rights of Rovi Corporation. Reverse
engineering and disassembly are prohibited.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
This product is licensed under the AVC patent portfolio license and VC-1
patent portfolio license for the personal and non-commercial use of a
consumer to (i) encode video in compliance with the AVC Standard and
VC-1 Standard (“AVC/VC-1 Video”) and/or (ii) decode AVC/VC-1 Video
that was encoded by a consumer engaged in a personal and
non-commercial activity and/or was obtained from a video provider
licensed to provide AVC/VC-1 Video. No license is granted or shall be
implied for any other use. Additional information may be obtained from
MPEG LA, LLC. See http://www.mpegla.com.
HDAVI ControlTM is a trademark of Panasonic Corporation.
x.v.ColorTM is a trademark.
VIERA LinkTM is a trademark of Panasonic Corporation.
VIERA CASTTM is a trademark of Panasonic Corporation.
EZ Sync™ is a trademark of Panasonic Corporation.
“AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation
and Sony Corporation.
SDXC Logo is a trademark of SD-3C, LLC.
“DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation.
“Blu-ray Disc”, “Blu-ray” and “Blu-ray Disc” logo are trademarks of Blu-ray
Disc Association.
“BD-Live” and “BD-Live” logo are trademarks of Blu-ray Disc Association.
“BONUSVIEW” and “BONUSVIEW” logo are trademarks of Blu-ray Disc
Association.
YouTube and Picasa are trademarks of Google, Inc.
The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.
“Blu-ray 3D” and “Blu-ray 3D” logo are trademarks of Blu-ray Disc
Association.
“Made for iPod” and “Made for iPhone” mean that an electronic accessory
has been designed to connect specifically to iPod, or iPhone, respectively,
and has been certified by the developer to meet Apple performance
standards.
Apple is not responsible for the operation of this device or its compliance
with safety and regulatory standards.
iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of
Apple Inc., registered in the U.S. and other countries.
VQT2W18
50
This product incorporates the following software:
(1) the software developed independently by or for
Panasonic Corporation,
(2) the software owned by third party and licensed to
Panasonic Corporation,
(3) the software licensed under the GNU General Public
License, Version 2 (GPL v2),
(4) the software licensed under the GNU LESSER General
Public License, Version 2.1 (LGPL v2.1) and/or,
(5) open sourced software other than the software licensed
under the GPL v2 and/or LGPL v2.1
For the software categorized as (3) and (4), please refer to
the terms and conditions of GPL v2 and LGPL v2.1, as the
case may be at
http://www.gnu.org/licenses/old-licenses/gpl-2.0.html and
http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
In addition, the software categorized as (3) and (4) are
copyrighted by several individuals. Please refer to the
copyright notice of those individuals at
http://www.am-linux.jp/dl/JPRCBW98
The GPL/LGPL software is distributed in the hope that it will
be useful, but WITHOUT ANY WARRANTY, without even the
implied warranty of MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
At least three (3) years from delivery of products, Panasonic
will give to any third party who contacts us at the contact
information provided below, for a charge no more than our
cost of physically performing source code distribution, a
complete machine-readable copy of the corresponding
source code covered under GPL v2/LGPL v2.1.
Contact Information
cdrequest@am-linux.jp
Source code is also freely available to you and any other
member of the public via our website below.
http://www.am-linux.jp/dl/JPRCBW98
SC-BTT750_350P_VQT2W18_eng.book
51 ページ 2010年6月21日 月曜日 午後4時51分
Getting Started
Limited Warranty
Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Blu-ray and DVD Products Limited Warranty
Product or Part Name
Parts
Labor
Blu-ray Disc Player, Portable
Blu-ray Disc Player
1 year
90 days
Blu-ray Home Theater System
1 year
1 year
DVD Player, Portable DVD Player 1 year
90 days
DVD Recorder
1 year
90 days
Rechargeable Batteries (pack),
DVD-RAM Disc (defective
exchange)
10 days
Not
Applicable
[BTT750] Wireless LAN adaptor
90 days
Not Applicable
During the “Labor” warranty period there will be no charge for labor.
During the “Parts” warranty period, there will be no charge for parts.
This Limited Warranty excludes both parts and labor for
non-rechargeable batteries, antennas, and cosmetic parts (cabinet).
This warranty only applies to products purchased and serviced in the
United States or Puerto Rico. This warranty is extended only to the
original purchaser of a new product which was not sold “as is”.
Mail-In Service
For assistance in the U.S.A. and Puerto Rico in obtaining repairs,
please ship the product prepaid to:
Panasonic Exchange Center
4900 George McVay Drive
Suite B
McAllen, TX 78503
panacare@us.panasonic.com
When shipping the unit, carefully pack, include all accessories, and
send it prepaid, adequately insured and preferably in the original carton.
If Lithium Ion batteries are shipped by air the package must be labeled
“Contains Lithium Ion Battery (No lithium metal)”. Damaged batteries
are prohibited from shipment by US Mail. Batteries must be securely
packed in a manner to prevent short-circuiting and a package cannot
contain more than 3 Lithium Ion batteries. Include a letter detailing the
complaint, a return address and provide a daytime phone number
where you can be reached. A valid registered receipt is required under
the Limited Warranty.
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE
PURCHASER WILL BE REQUIRED TO FURNISH A SALES
RECEIPT/PROOF OF PURCHASE INDICATING DATE OF
PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE.
CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT
RECEIVED WITHOUT SUCH PROOF OF PURCHASE.
Limited Warranty Limits And Exclusions
This warranty ONLY COVERS failures due to defects in materials or
workmanship, and DOES NOT COVER normal wear and tear or
cosmetic damage. The warranty ALSO DOES NOT COVER damages
which occurred in shipment, or failures which are caused by products
not supplied by the warrantor, or failures which result from accidents,
misuse, abuse, neglect, mishandling, misapplication, alteration, faulty
installation, set-up adjustments, misadjustment of consumer controls,
improper maintenance, power line surge, lightning damage,
modification, introduction of sand, humidity or liquids, commercial use
such as hotel, office, restaurant, or other business or rental use of the
product, or service by anyone other than a Factory Service Center or
other Authorized Servicer, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED
UNDER “LIMITED WARRANTY COVERAGE”.
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF
THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS
WARRANTY.
(As examples, this excludes damages for lost time, travel to and from
the servicer, loss of or damage to media or images, data or other
memory or recorded content. The items listed are not exclusive, but for
illustration only.)
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE
WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE
PERIOD OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or
consequential damages, or limitations on how long an implied warranty
lasts, so the exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have
other rights which vary from state to state. If a problem with this product
develops during or after the warranty period, you may contact your
dealer or Service Center. If the problem is not handled to your
satisfaction, then write to the warrantor’s Consumer Affairs Department
at the addresses listed for the warrantor.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS
LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.
Customer Services Directory (United States and Puerto
Rico)
Obtain Product Information and Operating Assistance; locate
your nearest Dealer or Service Center; purchase
Parts and Accessories; or make Customer Service and
Literature requests by visiting our Web Site at:
http://www.panasonic.com/help
or, contact us via the web at:
http://www.panasonic.com/contactinfo
You may also contact us directly at:
1-800-211-PANA (7262)
Monday-Friday 9am-9pm,
Saturday-Sunday 10am-7pm EST
For hearing or speech impaired TTY users, TTY:
1-877-833-8855
Accessory Purchases (United States and Puerto Rico)
Purchase Parts, Accessories and Instruction Books online for all
Panasonic Products by visiting our Web Site at:
http://www.pstc.panasonic.com
Or, send your request by E-mail to:
npcparts@us.panasonic.com
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)
(Monday-Friday 9am-9pm EST)
Panasonic Service and Technology Company
20421 84th Avenue South, Kent, WA 98032
(We accept Visa, MasterCard, Discover Card, American Express,
and Personal Checks)
For hearing or speech impaired TTY users, TTY: 1-866-605-1277
Reference
Limited Warranty Coverage (For USA and Puerto Rico Only)
If your product does not work properly because of a defect in materials
or workmanship, Panasonic Consumer Electronics Company (referred
to as “the warrantor”) will, for the length of the period indicated on the
chart below, which starts with the date of original purchase (“warranty
period”), at its option either (a) repair your product with new or
refurbished parts, (b) replace it with a new or a refurbished equivalent
value product, or (c) refund your purchase price. The decision to repair,
replace or refund will be made by the warrantor.
As of November 2009
VQT2W18
51
SC-BTT750_350P_VQT2W18_eng.book
52 ページ 2010年6月21日 月曜日 午後4時51分
Index
A
AC Power Connection . . . . . . . . . . . . .18
Angle . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Audio
Attribute . . . . . . . . . . . . . . . . . . . . . .46
Changing audio. . . . . . . . . . . . . . . . .24
Channel . . . . . . . . . . . . . . . . . . . . . .34
Language . . . . . . . . . . . . . . . . . . . . .36
AVCHD . . . . . . . . . . . . . . . . . . . . . . .45, 47
B
BD-J . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
BD-Live. . . . . . . . . . . . . . . . . . . . . . . . . .25
BD-Video Ratings . . . . . . . . . . . . . . . . .36
BONUSVIEW . . . . . . . . . . . . . . . . . . . . . .25
C
Chapter. . . . . . . . . . . . . . . . . . . . . . . . . .25
Cleaning
Disc. . . . . . . . . . . . . . . . . . . . . . . . . . .9
Lens . . . . . . . . . . . . . . . . . . . . . . . . . .9
Main unit . . . . . . . . . . . . . . . . . . . . . . .9
Connection
Antenna . . . . . . . . . . . . . . . . . . . . . .13
AUX . . . . . . . . . . . . . . . . . . . . . . . . .14
HDMI. . . . . . . . . . . . . . . . . . . . . . . . .15
iPod/iPhone . . . . . . . . . . . . . . . . . . .32
OPTICAL IN . . . . . . . . . . . . . . . .14, 15
Set Top Box . . . . . . . . . . . . . . . . . . .15
Speaker . . . . . . . . . . . . . . . . . . . . . .13
TV . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Wireless system . . . . . . . . . . . . . . . .12
D
Deep Color . . . . . . . . . . . . . . . . . . . . . . .47
Dialog Enhancer . . . . . . . . . . . . . . . . . .35
DIRECT NAVIGATOR . . . . . . . . . . . . . .24
Disc and card handling. . . . . . . . . . . . . .9
Discs that cannot be played. . . . . . . . . .8
DNS Server . . . . . . . . . . . . . . . . . . . . . .39
Dolby Digital . . . . . . . . . . . . . . . . . .37, 47
Dolby Digital Plus . . . . . . . . . . . . . .37, 47
Dolby Pro Logic II . . . . . . . . . . . . . .23, 47
Dolby TrueHD . . . . . . . . . . . . . . . . .37, 47
DTS . . . . . . . . . . . . . . . . . . . . . . . . . .37, 47
DTS-HD. . . . . . . . . . . . . . . . . . . . . . .37, 47
DVD-Video Ratings . . . . . . . . . . . . . . . .36
F
Finalize . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Firmware update . . . . . . . . . . . . . . . . . .20
Format . . . . . . . . . . . . . . . . . . . . . . . . . .26
Frame-by-frame . . . . . . . . . . . . . . . . . . .24
H
HDMI . . . . . . . . . . . . . . . . . . . . . . . . 15, 47
High Clarity Sound . . . . . . . . . . . . . 35, 37
I
iPod/iPhone. . . . . . . . . . . . . . . . . . . . . . 32
IP address . . . . . . . . . . . . . . . . . . . . . . . 39
J
JPEG . . . . . . . . . . . . . . . . . . . . . . . . 27, 45
L
LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Language
Audio . . . . . . . . . . . . . . . . . . . . . . . . 36
Code list . . . . . . . . . . . . . . . . . . . . . . 46
Menu . . . . . . . . . . . . . . . . . . . . . . . . 36
On-screen . . . . . . . . . . . . . . . . . . . . 37
Soundtrack. . . . . . . . . . . . . . . . . . . . 34
Subtitle . . . . . . . . . . . . . . . . . . . . 34, 36
Local storage . . . . . . . . . . . . . . . . . . . . 47
LPCM . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
M
Menu
Playback . . . . . . . . . . . . . . . . . . . . . 34
Pop-up . . . . . . . . . . . . . . . . . . . . . . . 24
Setup . . . . . . . . . . . . . . . . . . . . . . . . 36
MPEG2. . . . . . . . . . . . . . . . . . . . . . . . . . 45
MP3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Muting . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
N
Network
Connection. . . . . . . . . . . . . . . . . . . . 16
Setting . . . . . . . . . . . . . . . . . . . . 19, 39
O
On-screen
Language . . . . . . . . . . . . . . . . . . . . . 37
Status Message . . . . . . . . . . . . . . . . 24
P
Picture-in-picture . . . . . . . . . . . . . . . . . 25
Playback
AVCHD . . . . . . . . . . . . . . . . . . . . . . 24
JPEG . . . . . . . . . . . . . . . . . . . . . . . . 27
MPEG2 . . . . . . . . . . . . . . . . . . . . . . 24
MP3 . . . . . . . . . . . . . . . . . . . . . . . . . 28
Playlist. . . . . . . . . . . . . . . . . . . . . . . . . . 22
Pop-up Menu. . . . . . . . . . . . . . . . . . . . . 24
Product Disposal . . . . . . . . . . . . . . . . . . 9
Progressive. . . . . . . . . . . . . . . . . . . . . . 35
Proxy Server . . . . . . . . . . . . . . . . . . . . . 39
P4HD . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Q
Quick Start . . . . . . . . . . . . . . . . . . . . . . 39
R
Radio . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Random play . . . . . . . . . . . . . . . . . . . . 35
Re-master . . . . . . . . . . . . . . . . . . . . . . . 35
Remote control
Remote control code . . . . . . . . . . . . 21
Using the remote control . . . . . . . . . . 9
Repeat play . . . . . . . . . . . . . . . . . . . . . 35
Restore Default Settings. . . . . . . . . . . 39
Resume play function . . . . . . . . . . . . . 24
S
SD card . . . . . . . . . . . . . . . . . . . . . . . 9, 26
Search . . . . . . . . . . . . . . . . . . . . . . . . . 24
Setup menu . . . . . . . . . . . . . . . . . . . . . 36
Skip . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Sleep timer . . . . . . . . . . . . . . . . . . . . . . . 6
Slideshow. . . . . . . . . . . . . . . . . . . . . . . 27
Slow-motion . . . . . . . . . . . . . . . . . . . . . 24
Soundtrack. . . . . . . . . . . . . . . . . . . . . . 34
Status Message . . . . . . . . . . . . . . . . . . 24
Still pictures . . . . . . . . . . . . . . . . . . . . . 27
Subtitle . . . . . . . . . . . . . . . . . . . . . . . . . 34
Surround sound. . . . . . . . . . . . . . . . . . 23
V
VIERA CASTTM . . . . . . . . . . . . . . . . . . . 33
VIERA LinkTM "HDAVI ControlTM" . . . . 30
W
Whisper-mode Surround . . . . . . . . . . 23
Wireless LAN . . . . . . . . . . . . . . . . . . . . 16
X
x.v.ColorTM . . . . . . . . . . . . . . . . . . . . . . 47
24p . . . . . . . . . . . . . . . . . . . . . . 35, 38, 47
3D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus,
New Jersey 07094
http://www.panasonic.com
Panasonic Corporation 2010
Printed in Malaysia
VQT2W18
F0610BT0
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising