operating instructions computer controlled
OPERATING INSTRUCTIONS
COMPUTER CONTROLLED UNIVERSAL NI-CD & NI-MH BATTERY CHARGER
if
2.
6.
Connect the AC adaptor’s jack to the charger.
Insert 1 to 4 pieces AA / AAA / C / D and/or 1 to 2 pieces 9V block Ni-Cd and Ni-MH cells in the
battery compartment.
YOU CAN MIX TO RECHARGE NICKEL-METAL-HYDRIDE AND NICKEL-CADMIUM
BATTERIES.
Charging without discharge (For AAA, AA, C and D size batteries)
The charger has equipped with the microprocessor to control the charging. Plug the AC adaptor
into a correct house-hold electric outlet. The red LED will light up and the quick charge mode
starts. When the battery is charged, the red lights will turn.off and the green LED will light up
and the trickle charge mode is on. The charged batteries are ready for use.
Charging with discharge (For AAA, AA, C and D size batteries)
Plug the AC adaptor into a correct house-hold electric outlet and press the red “Discharge”
button within 30 seconds. The red LED will light up and flash to indicate the discharge mode is
started. When the battery is discharged, the red lights will light up and stop flashing to indicate
quick charging mode. After the battery is charged, the red lights will turn off and the green LED
will light up and the trickle charge mode is on. The charged batteries are ready for use.
When 9V cells are placed in the charger, one red LED (between the 9V battery compartments)
will on. After the proper charge time is reached (14 hours by timer) the red LED will goes off to
indicate the charging is finished.
Unplug the charger and remove the batteries from the charger when not in use.
SPECIAL FEATURE
Detection of bad cell (For AAA, AA, C and D size batteries only)
Insert batteries in charging slots do not press red button.
When the battery is placed into the compartment, the red LED will be light up and the charger will
detect the status of the battery at that moment. If the battery is not suitable for recharging, the LED
light will switch off and stop charging. Defective are indicated by:
a) LED indicator off
b) LED indicator blinking
TECHNICAL DATA:
Input DC 12V 1000mA USE WITH AN EXTERNAL ADAPTOR
Charge current: Constant pulse current Max Timer
AAA 350 mA 3.5 hours _
AA 700 mA 4.5 hours
C 700 mA 9.5 hours
D 700 mA 17 hours
Trickle charge current:
(AAA, AA, C, D) 1/10 constant pulse current
Discharge current:
‚©, 350mA
125mA
Detect Method “AV auto cut-off for AAA, AA, C, D size batteries
Charging current for 9V | 20mA
Charging time 14 hrs by timer controlled
For battery Type AAA 180-900mAh
AA 500-2500mAh
C 1200-4500mAh
D 1200-9000mAh
9V 100-200mAh
CAUTION:
Do not expose charger to rain or moisture. For indoor use only. This charger is intended for use with
Nickel-Cadmium and Nickel-metal-hydride rechargeable batteries only. Attempting to charge other
- types of batteries may cause personal injury and damage to the charger.
: The appliance is not intended for use by young children or infirm persons without supervision. Young
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising