steel security cover for racks
Manufacturing Company — Since 1947
SSC-series
Steel Security Covers
Description:
The SSC-series of steel security covers are made with 18-gauge
US steel. Panels mount over rackmounted equipment to provide
protection from accidental or intentional tampering of controls and
settings. Panels mount into the same mounting holes as equipment. For ease of installation, panels mount using only two screws
(top left and bottom right). The remaining screw positions on the
panel are notched for screw clearance. Panels are available in
two styles: VentedPanels: perforated steel with a protruding 1.5" deep
space to accommodate equipment knobs and controls. The
perforation pattern is 0.0781" holes on 1/8" staggered centers
to provide protection and heat ventilation for equipment. Panel
is finished in smooth, semi-gloss black powder epoxy paint
for durable, scratch-resistant performance.
Vented:
17.375"
.75"
(A)
PlexiglasPanels:steel with a protruding 1.5" deep frame
and a smoked Plexiglas insert to accommodate and see
equipment knobs and controls. Steel portion of panel is
finished in smooth, semi-gloss black powder epoxy paint for
durable, scratch-resistant performance.
Features:
.938"
.862"
.625”
19"
Plexiglas:
•
Composition: 18-gauge US steel
•
Style: flanged
•
Type: vented or Plexiglas
•
Finish: smooth, semi-gloss black powder epoxy
•
Made in the USA
17.375"
.938"
.862"
.75"
(A)
16.593"
.625”
19"
“A”
Panel Space (inches)
“A”
Rack Units
Carton Pack
L9-191
L9-193
L9-195
L9-197
1.75
3.5
5.25
7
1
2
3
4
1
1
1
1
L9-191P
L9-193P
1.75
3.5
1
2
1
1
Model. No.
Description
Former No.
VENTED:
SSC-1V
SSC-2V
SSC-3V
SSC-4V
Steel Security Cover – Vented (flanged)
Steel Security Cover – Vented (flanged)
Steel Security Cover – Vented (flanged)
Steel Security Cover – Vented (flanged)
PLEXIGLAS: SSC-1P
SSC-2P
Steel Security Cover – Plexiglas (flanged)
Steel Security Cover – Plexiglas (flanged)
One rack unit = 1.75"
©2010 Lowell Manufacturing Company, 100 Integram Dr., Pacific MO 63069 USA. Ph–800.325.9660 or 636.257.3400. Fax—888.456.9355 or 636.257.6606. Lowellmfg.com
Lowell makes every effort to provide accurate information while reserving the right to change specifications and/or improve manufacturing methods without notification.
Spec #1063 (rev. 09.14.10)
Page 1 of 1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising