Ultra Fast NiMH/NiCd Charger
AA/AAA/C/D/PP3 Battery Charger Product Instruction
Model No.: VTE-10000
Universal Smart LCD NiMH Charger – Worldwide
Use
Powered by External AC Adaptor (Input: 100-240V
AC) for worldwide use
The interchangeable plugs Power Supply can be
used in UK, Europe, US and Australia
Powered by Car Adaptor to be charged in a vehicle
Special Design to FAST charge both 8.4V and 9.6V
PP3 Batteries, -dV auto cut-off!
5.
6.
7.
After the batteries are fully charged, the wording “FULL” will indicate on the
LCD screen to indicate batteries are ready for use.
Unplug the charger and remove the batteries from the charger when not in
use.
Begin again at Step 1 to charge the next set of batteries.
Bad Cell Detection
When a battery is placed into the battery charger, the charger will
automatically detect the status of the battery. If a battery is not suitable for
charging i.e. short circuit or wrong polarity, the Full Bar on LCD Display
would be flashing and the text “Bad” would be shown on the left hand side.
CHARGING TIME TABLE:
Your AAA/AA/C/D/PP3 Battery Charger is designed to charge Vapex’Tech
NiMH rechargeable batteries rated to 2900mAh(AA), 1100mAh (AAA),
5000mAh ( C), 10000mAh (D), 8.4V-280mAh(PP3), 9.6V-220mAh (PP3). The
batteries will be fully-charged by Microprocessor-Control System for
AAA/AA/C/D/PP3 batteries. You can change 1/2/3/4 AAA/AA/C/D or 1/2pcs
8.4V or 9.6V PP3 NiMH batteries simultaneously.
SAVE THESE INSTRUCTIONS
Features
 Specially designed with LCD Battery Indicator.
 Powered by the supplied Switching mode AC Adaptor when using at indoor
or by the supplied DC Car Adaptor when using in a vehicle.
 Recharges 1 piece to 4 pieces of AA/AAA/C/D Ni-MH batteries and 1 to 2
pieces of 8.4V or 9.6V cells (Ni-MH) at a time.
 4 individual charging channels for AA/AAA/C/D and 2 individual charging
channels for 9V cells.
 Intelligent Microprocessor Controlled – Batteries life well protected by
negative delta V cut-off function and timer protection.
 Defective and Non-rechargeable battery detection.
 Electric LCD display with Blue color backlight and designed with :
 Battery Charging Status indication
 Charge: when battery is in charging status
 Full: when battery is fully charged.
 BAD: when detects wrong cells
Input
DC 18V 500mA USE WITH AN EXTERNAL
ADAPTOR
Charge current:
Ni-MH
Charging Time
AAA size : 800mA
AAA 1100mAh
1.3 hours
AA size : 800mA
AA 2900mAh
3.3 hours
C 5000mAh
6.5 hours
C size : 800mA
C 4000mAh
5.3 hours
C 2500mAh
3.5 hours
D 10000mAh
13.3 hours
D 8000mAh
11 hours
D size : 800mA
D 5000mAh
6.5 hours
D 4000mAh
5.5 hours
PP3 (8.4V) 280mAh
6 hours
PP3( 9.6V) 220mAh
4.5 hours
PP3 (8.4V & 9.6V): 50mA
PP3( 8.4V) 200mAh
4.2 hours
PP3 (8.4V) 170mAh
3.8 hours
Detect Method
-V auto cut-off for AAA, AA, C, D, PP3 size
batteries
For battery Type
AAA 500-1100mAh
AA 1300-2900mAh
C 1300-5000mAh
D 1300-10000mAh
8.4V 100-280mAh, 9.6V/100~220mAh
*Charge time will vary depending upon the brand, capacity and condition of
batteries being charged.
Specifications of AC Adaptor:
Power supply :
Input Voltage
100-240VAC, 50/60 Hz
12~18V DC 9W
Important Safety Instructions
Safety Features






Negative delta V cut -off function for AAA/AA/C/D/PP3 size batteries
Peak Voltage Cut Off
Safety timer to prevent over charge
Short circuit protection
Reverse-polarity protection
Bad cell Detection
Charging Instructions
Insert 1 to 4 pieces of AA/AAA/C/D or 1 to 2 pieces of 9V cell rechargeable
Ni-MH batteries into the battery compartment.
2. Make correct contact for polarity ( + and – ) ; according to the sign in the
battery compartment.
3. For Using in indoor
First time use, connect the right plug for your country on the power supply.
And connect the supplied AC adaptor’s barrel plug into the jack on the back of
the charger. Plug the AC adaptor into household electric outlet. The switching
power supply will adjust automatically.
Caution: The supplied AC adaptor supplies 18VDC and delivers 500mA,
and its plug fits into the charger’s DC input jack. Using an adaptor that
does not meet these specifications could damage the charger or the
adaptor.
When using in a vehicle
Connect the supplied DC car adaptor’s barrel plug into the charger’s DC
input jack. Plug the large end of the cord into the 12V car lighter power
port
4. The LCD will indicate the proper charging and the wording “CHARGE” will
be shown. (The Blue backlight will light up during the charging process and
turn off once the batteries are fully charged)
1.
1. Before charging, read instruction
2. This charger is intended for use with Nickel-metal-hydride rechargeable
batteries only. Attempting to charge other types of batteries may cause
personal injury and damage to the charger.
3. Do not expose charger to rain or moisture. For indoor use only.
4. Remove from mains when not in use.
5. Never use an extension cord or any attachment not recommended by
manufacturer, otherwise this may result in a risk of fire, electric shock or
injury to persons.
6. Do not operate the charger if it has been subjected to shock or damage.
Take it to a qualified serviceman for repair.
7. Do not disassemble the charger. Incorrect reassemble may result in a risk
of electric shock or fire.
8. Unplug the charger from outlet before attempting any maintenance of
cleaning.
9. This power unit is intended to be correctly orientated in a vertical or floor
mount position.
10.
The appliance is not intended for use by young children or infirm
persons without supervision. Young children should be supervised to
ensure that they do not play with the appliance.
11.
Before scrapping your charger, remove the batteries from the unit and
they are disposed of safety.
SAVE THESE INSTRUCTIONS, DANGER-TO REDUCE THE
RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW
THESE INSTRUCTIONS.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising