Product Specification
Product Specification
The SurveyorVFT Pressurized Camera Dome housing has all
the features and functions of the SurveyorVFT Camera Dome
System. The interior is pressurized with dry nitrogen gas and
regulated with a relief valve. A “Low Pressure Warning”
displays if pressure inside the dome dips below ½ psig. Sensor
titles display for temperature, relative humidity and pressure,
which can be disabled. In addition, the interior is
environmentally controlled using a thermostatically-controlled
heater/fan assembly. This environment is characterized as
ideal (IP67 rated) and provides the maximum protection
against the elements that would normally cause rapid
deterioration of electronic and video components. The exterior
is UV resistant polyethylene plastic. The lower dome is injection
molded distortion-free clear polycarbonate plastic. The SVFTPRS can be programmed and operated using any Pilot or
NOVA™ control system and enhanced Vicoax®II protocol. It is
available for outdoor use and can be configured with a variety
of camera types. Refer to Table 1 for models.
Pressurized
Camera Dome Housing
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Sealed and pressurized housing offers
maximum environmental protection
Impact-resistant polycarbonate dome
Provides indoor or outdoor environmental
control for SurveyorVFT Camera Dome
Pendant or wall mount available
Versions available with color 22X or day/night
23X or 35X
High-resolution in 23X and 35X models
(540 TVL)
Wide Dynamic Range (23X and 35X) provides
best contrast for high quality images
23X provides Digital Noise Reduction and
enhanced sensitivity
Enhanced autofocus
EIS (image stabilizer) on 35X model
Prefabricated multi-conductor cable
assembly available
Compatible with all Vicon matrix systems
Low pressure sensor alarm output
On-screen temperature, humidity and
pressure value indications
Daisy chain connectivity with full duplex
capability
ViconNet (Version 5) (TCP/IP) converts to
digital video for viewing and control on
Kollector Elite and Pro Digital Video
Recorders and ViconNet workstations
Fiber-optic option transmits video and
control data to fiber optic receivers over long
distances
UTP option transmits video up to 3000 ft over
unshielded twisted pair
NEMA TS2 compliant
The basic SVFT-PRS provides video transmission over coaxial
cable. Options are available that provide TCP/IP (ViconNet),
fiber-optic and twisted-pair (UTP) video transmission. Each of
these options includes an interface board that allows the
specific type of video transmission. An appropriate receiver is
required.
The ViconNet® (version 5) option provides support for network
connection to Kollector® Elite Digital Video Recorders and
ViconNet Workstations via ViconNet software. A pre-installed
Network interface board allows direct plug-in to a system
network switch. Video from the camera is available to all
network recorders and workstations for live view and recording.
The SVFT-PRS camera dome can be used in conjunction with
competitive PTZ drivers through DIP-switch selection.
The SVFT-PRS is designed for easy snap-in installation. The
drive simply snaps into the housing. When removed, the
housing retains all programmed functions in its on-board nonvolatile memory. The customer interface board snaps down for
easy access. The customer interface board is pre-wired for
convenience.
There is a wall mount and pipe adapter available for mounting
the pressurized housing.
ASSOCIATED EQUIPMENT AND ACCESSORIES
Model SVFT-PR-WMA Wall Mount, Product Code 8381-01:
Used to easily mount the pressurized housing to a horizontal
surface for an indoor or outdoor application. A convenient
access door allows installation and servicing. Refer to Product
Specification 144.
Model SVFT-PR-P Pipe Adapter, Product Code 8382: Used
to easily mount the pressurized housing to various
SurveyorVFT mounts or a vertically oriented 1-1⁄2 inch NPT
schedule 40 pipe. Refer to Product Specification 144.
Model SVFT-PRC12 Pre-Wired Coaxial Cable, Product
Code 8739: Prefabricated coaxial cable for all connections.
Model SVFT-PRC12T Pre-Wired Twisted Pair Cable,
Product Code 8740: Prefabricated twisted pair cable for all
connections.
1
Vicon part number 8009-7163-03-07
ViconNet, Kollector and Vicoax are registered trademarks; NOVA and
SurveyorVFT are trademarks of Vicon Industries Inc.
Product specifications subject to change without notice.
ExView is a trademark of Sony Corporation.
Product Specification
Model
Number
Product
Code
SVFT-PRS22E
8768
SVFT-PRS22EC
8768-01
SVFT-PRS23
8769
SVFT-PRS23C
8769-01
SVFT-PRS35
9103
SVFT-PRS35C
9103-01
Camera Type/
Format
Color/NTSC
with ExView Technology
Color/PAL
with ExView Technology
Color/NTSC
(day/night with WDR and DNR)
Color/PAL
(day/night with WDR and DNR)
Color/NTSC
(day/night with wide dynamic range
and image stabilization)
Color/PAL
(day/nigh with wide dynamic range
and image stabilization)
Optical Zoom/
Total Zoom
22x/264x
22x/264x
23x/276x
23x/276x
35x/420x
35x/420x
For ViconNet version 5 option, add -75 (-76 PAL) to the product code; Fiber Optic option, add -30 (-31 PAL) to the product code; for
UTP (T) option, add -40 (-41 PAL) to the product code.
Table 1: SurveyorVFT Pressurized Model Versions
Model Number
Product Code
VF-1400R
VF-1400RR
VF-SR-20/2
8421-00
8421-02
8423-00
Description
Receiver, for SurveyorVFT transmission, simplex video and duplexRS-422 data
Receiver, for SurveyorVFT transmission, simplex video and duplexRS-422 data
Card cage with power supply
Table 1 (cont’d): Fiber Optic Receiver Options
Model Number
Product Code
V-VID-BAL
6518-20
V652R-NVT
7453
V1613-NVT
7648
V1662-NVT
6519
Description
Transceiver, converts UTP video to composite, transmits or receives video and
Vicoax data up to 1000 ft over twisted pair cable
Receiver, converts UTP video to composite up to 3000 ft from transmitter (does not
support Vicoax systems)
16-Channel Hub Receiver, converts UTP video to composite up to 1000 ft from
each transmitter
16-Channel Hub Receiver, converts UTP video to composite up to 3000 ft from
each transmitter (does not support Vicoax systems)
Table 1 (cont’d): UTP Receiver Options
Model Number
S24WPS-1
S24PS-230
S28WPS-1/
S28WPS-230
Product Code
7028-10
7027-01
7030-10/7030-01
V2448-175PS
6410-20
V248-600PS
8438
V248-300PS
6422-10
V2416-600PS
8437
Description
Single-channel, indoor/outdoor, 120 VAC input, 24 VAC output, 2 A
Single-channel, indoor, 230 VAC input, 24 VAC output, 2.5 A
Single-channel, 120/230 VAC input, 28 VAC output, 3 amps, for outdoor SurveyorVFT
Camera Domes
Four-channel, indoor, 120 VAC input, 24/28 VAC output (jumper selectable), 7/6.25 amps
(total), for indoor SurveyorVFT Camera Domes
Eight channel, 120 VAC input, 24 VAC output, 25 amps (total), for indoor SurveyorVFT
Camera Domes
Eight channel, 120 VAC input, 24/28 VAC output, 12.5/10 amps (total), for indoor
SurveyorVFT Camera Domes
Sixteen channel, 120 VAC input, 28 VAC output, 26 amps (total), for indoor SurveyorVFT
Camera Domes
Caution: Be aware that some of these power supplies are for indoor use only. Also note that on multi-channel units, the amperage
stated is the total for all channels. To be assured of adequate current for the installation, in some cases, this means that not all
Table 1 (cont’d): Power Supplies
channels can be used.
2
Technical Information
ELECTRICAL
Video Output
Impedance:
Drive Type: Electrical motorized pan and tilt
with electronic control.
Fuse:
Camera Types: Units available in color and
day/night (NTSC/PAL) formats
and a variety of zoom and
feature capabilities.
Radio Frequency
Emission Rating:
Input Voltage: 18-30 VAC. Will operate within
spec on voltages up to 32 VAC.
For voltages between 30-32
VAC, use a Class 3 indoor/dry or
outdoor/wet power supply.)
MECHANICAL
Application:
Heat Equivalent: 2.5 btu/min (0.6 kg-cal/min)
with SurveyorVFT (coax, UTP,
fiber); 3.1 btu/min
(0.77 kg-cal/min (ViconNet).
Note: These figures represent
the conversion of 100% of the
electrical energy to heat. Actual
percentage of heat generated
will be less and will vary from
product to product. These
figures are provided as an aid in
determining the extent of cooling
required for an installation.
FCC Class A.
Indoor or outdoor.
Wall mounting with SVFT-PRWMA Wall Mount or pendant
mounting with SVFT-PR-P Pipe
Mount.
Seal Type:
1 “O” ring, fabricated from
neoprene, 0.139 in. (3.5 mm)
cord diameter and an EPDM
(rubber) gasket.
Mount Size/Thread:
Dimensions:
Maximum Power Cable
Distance: See Table 2.
Camera Mechanism
Connector Types: Video Out: See version type.
Power: 2-position removable
screw terminal block.
Control Input/Output: See
version type.
Relay Output: See version type.
Alarm Input: 8-position
removable screw terminal block.
Housing Connector
Type: 23-pin, circular, pressure rated.
Mating connector included for
access to all SurveyorVFT
signals including heater/blower,
power, communications and
video.
F1:5x20 mm, 1.6 A 250 VAC,
slo blo.
F2: 5x20 mm, 2.5 A 250 VAC,
slo blo.
Mounting:
Current: 1.8 A with SurveyorVFT (coax,
UTP, fiber); 2.3 A (ViconNet).
Power Consumption: 44 W with SurveyorVFT (coax,
UTP, fiber); 54 W (ViconNet).
75 ohms.
Weight:
Construction:
Color:
4 threaded hole pattern (3.75 in./
95 mm square) on top used for
mount attachment. Each
threaded hole is 1/4-20 x 0.41 in.
(10 mm) deep.
Gasket provided to seal top
interface.
See Figure.
Pendant
Housing Diameter (D1):
9.5 in. (241 mm).
Dome Diameter (D2):
6.0 in. (152 mm).
Housing Height (H1):
7.3 in. (185 mm).
Total Height (H2):
10.2 in. (259 mm).
7.5 lb (3.4 kg).
12.0 lb (5.4 kg) with
SurveyorVFT included.
Plastic, cast aluminum; trim ring,
cast zinc/aluminum.
White housing and sunshield;
black trim ring.
IP Rating: MIP66, NEMA 4X; NEMA TS22003 V02.06; IK10++ (50 joules)
tested in accordance with
EN 6008-2-75 Eh Pendulum
Hammer test.
Table 2: Maximum Power Cable Distance
Distance ft (m)
Wire Size
(AWG)
Annealed
Copper Wire
24 VAC
28 VAC
Coax, Fiber,
UTP
ViconNet
Coax, Fiber,
UTP
20
165 (65)
130 (40)
280 (85)
217 (66)
18
258 (102)
203 (62)
438 (134)
340 (104)
16
413 (126)
325 (99)
700 (213)
544 (169)
14
660 (262)
520 (159)
1120 (341)
870 (265)
12
1031 (314)
812 (248)
1750 (533)
1359 (414)
ViconNet
3
Technical Information
Shipping Dimensions:
Height: 12.4 in (315 mm).
Width: 15.25 in. (387 mm).
Depth: 20.75 in. (527 mm).
Shipping Weight:
16 lb (7.3 kg).
Shipping Volume:
2.3 ft3 (0.07 m3).
ENVIRONMENTAL
Ambient Temperature
and Humidity Range:
Maintained
Temperature
and Humidity Range:
Ingress Protection:
NEMA TSA
Compliance:
Wind:
Pressurization Volume:
Low Pressure
Indication:
4
Video level is clamped at 6.5 V
max. Power protected to 1500 W
peak pulse with a 10/1000 µs
waveform. RS-422 data lines are
clamped to 5 V max. with
transient suppressors.
CAMERA MECHANISM
OPERATION
360°.
Video Pan View:
-30° F (-34° C) to 165° F (74° C)
in accordance with NEMA
2.1.5.1 STD2; -40 to 132°F (-40
to 55°C) continuous rotation.
Up to 100% relative humidity,
condensing.
14° F (-10° C) to 140° F (60° C)
maximum. Up to 90% relative,
noncondensing.
EN60529, IP 67 rated.
Operating Voltage/Frequency:
2.1.2, 2.1.3;
Power Interruption: 2.1.4;
Temperature & Humidity: 2.1.5;
Transients, Power Service:
2.1.6;
Transients, Input/Output
Terminals: 2.1.7;
Non Destruct Transient
Immunity: 2.1.8;
Vibration: 2.1.9;
Shock (Impact): 2.1.10.
Video Tilt View:
Pan Speed:
Autopan Speed:
Tilt Speed:
Zoom and Focus
Speed:
Sectoring:
Preset Capabilities:
1 - 5 psi (0.07 - 0.34 atm or bars)
maximum.
Variable, 0.1 to 360°/sec.
Variable, 0.1 to 42°/sec;
enable/disable.
Variable, 0.1 to 150°/sec.
Less than 1.8 sec from end to
end.
16 max, programmable for size
and titling; capability to be
blanked out.
79 individual programmable
preset positions.
1 sec nominal.
Preset Accuracy
(Pan & Tilt):
0.1° maximum.
Tour Capabilities:
Autotour Capabilities:
Alarm Capabilities:
0.28 ft3 (0.008 m3) volume.
By default, if pressure dips
below 1/2 psig a “Low Pressure
Warning.” On Screen Display
message appears. This alarm
warning may also be sent to the
CPU by enabling the alarm in
the dome’s Alarm Handling,
Report Enable sub-menu.
When this is activated, the On
Screen message will not appear.
The unit is preconfigured for
sensor titles to display for
temperature, relative humidity
and pressure. These titles can
be disabled in the titling menus.
-2.5° (-2.5° above horizon) to
92.5° (-2.5° past vertical).
Preset Solving
Speed:
Tested at sustained winds up to
120 mph with gusts to 150 mph.
HOUSING OPERATION
Pressurization: Schraeder type valve used to
fill and drain housing with dry
nitrogen gas. Relief valve
automatically relieves pressure
at 5- 7 psi (0.34-0.48 atm).
Leakage <2 psi per year.
Operating Pressure:
Surge Protection:
Relay Output
Capabilities:
8 tours. 32 programmable
events per tour. Events may be
preset positions with speed
control, alarm acknowledge,
dwelltime control, relay control,
call autotours, tour repeat or
another tour, save/recall camera
status.
2 autotours available with 256
pan, tilt and zoom functions per
autotour. Programming is done
in real time with joystick and
push buttons.
4 alarm inputs, individually
programmable.
Functional state enable/disable.
Report state (report on/off).
Active state (high/low).
Mode (manual, momentary or
automatic) with programmable
dwell time control.
Set and reset action (preset
solve, relay on/off, tour, autotour.
Alarm titling.
1 relay output.
Power-on state definition
(on/off).
Output type definition
(momentary or latching).
Relay function status titling.
Resistive Load: 1.5 A @
30 VDC.
Inductive Load: 0.75 A @
30 VDC.
Technical Information
Control Display:
Privacy Masks:
Screen Titling
Capabilities:
Scheduling:
Multilanguage Menu:
Day/Night (23X/35X)
Features:
Auto Baud:
Absolute Position
Control:
PTZ Functions:
On-screen, menu-driven system
allowing full configuration of the
dome.
16 individual, programmable,
zoom-scalable.
Variety of camera ID information
is software programmable.
Programmable for camera,
preset, sector, relay and alarms.
Camera: 1 for each.
Preset: 79 maximum.
Sector: 16 maximum.
Alarm: 4 maximum.
Individual type date and time
enable/disable; 20 characters
maximum.
Selectable position.
Three text sizes for top 2 lines.
Fade capability.
Compass/azimuth, 8 compass
headings (N, NE, E, SE, S, SW,
W, NW).
Diagnostic information can be
displayed onscreen.
Real time clock allows
scheduling of up to 64 events,
including presets, relays, alarms,
tours or autotours.
English, Spanish, French,
German and Italian.
6 programmable motion
detection zones with 3 sensitivity
levels; image freeze during
preset solve; flip (invert) video
image.
Auto baud detection in RS-232/
RS-485 mode; 4800, 9600,
19,200 bps baud rates
supported.
Available in RS-422/RS-485
mode.
Pan/tilt: 0.125°; zoom: 0.125X.
Auto Home: Can program to go
to a set home location after a set
time duration of no activity or to
its home upon power-up.
Scalable PTZ: Can enable to
adjust the pan and tilt speed
relative to the amount of
magnification.
PTZ Route: Takes shortest
distance to preset PTZ selection.
Overload: Software control to
prevent movement beyond
limits.
Lens Speed: Selectable Low,
medium, high from control
station.
Iris Protection: Autoiris and auto
shutter adjustment for amount of
light.
Competitive Protocols:
DIP switch selectable.
COAXIAL/UTP VERSIONS
Control Protocol
Hardware: Vicon’s Pilot/NOVA control
systems and a variety of Vicon
keypads.
Control Protocol
Software:
Control Protocol
Format (selectable via
DIP switch 2)1:
Vicon’s Surveyor Direct Control
program run on a standard PC
type computer with an RS422/485 half duplex protocol
interface.
Vicon: RS-422 or RS-485
protocol. Communication is
simplex or half duplex operation
at 4800, 9600 or 19,200 baud or
Vicon’s enhanced VicoaxII
protocol (superimposed data on
composite video signal)
automatically detected upon
power up.
RS-485 protocol utilizes full tristate outputs for daisy chain
capability.
Pelco: Pelco D Protocol (3/2/99);
RS-485 N.8.1, simplex 2400
bps, duplex 4800 bps.
Sensormatic/AD2: RS-422/RS485 communication protocols
user’s guide Rev. A (csd 05/00);
RS-422/RS-485 duplex N.8.1
4800 bps. May require RS-422
converter, RCSN422.
Ultrak: KD6, KD6-Z control
protocols; RS-485 simplex E.8.1,
9600 bps.
Philips: Receiver/Driver/Auto
Dome control code protocol;
RS-232 simplex N.8.1, 2400 or
9600 bps.
Kalatel: Non-repeating transmit
commands; RS-422 simplex
N.8.1, 9600 bps.
Cohu: MPC System RS-422
interface; RS-422 duplex N.8.1,
9600 bps.
Panasonic: Panasonic
conventional and new camera
protocol.
NTCIP: 1205 v1.08 compliance.
1) Note: All companies make changes and improvements in
their products. Because this product can interface with
equipment not manufactured by Vicon, there is a possibility that
the interface protocols may have changed since Vicon tested
this product with the interfacing equipment. Vicon recommends
purchasing a single unit for bench testing prior to purchasing
and installing this product in quantity.
2) Certain Sensormatic/AD controllers store preset locations in
the controller. Preset functionality in the SurveyorVFT works
differently with these controllers.
5
Note: Pelco is a registered trademark of Pelco. Sensormatic is a registered trademark of Tyco International Limited. Philips/Bosch is a trademark of Koninklijke
Philips Electronics N.V. Kalatel is a trademark of GE Interlogix. Ultrak is a trademark of Honeywell Inc. Cohu is a trademark of Cohu, Inc.
Technical Information
Connector Types:
Video: Video Out:
Coax: BNC-F.
UTP: 3-position removable
screw terminal block.
Control Input/Output:
3-position removable screw
terminal block.
Relay Output: 8-position
removable screw terminal block.
FIBER-OPTIC VERSION
Fiber Optic Receiver
Specs: I/O Level: 1 V p-p.
I/O Impedance: 75 ohms.
Bandwidth: 8 MHz.
Differential Gain: 5%.
Differential Phase: 5°.
SNR: 60dB.
Data:
Data Rate: Up to 19.2 Kbps.
Optical:
Wavelength: 850/1300 nm.
Loss Budget (62.5 u): 12 dB.
Connector: ST.
VICONNET VERSION (NETWORK/TCP/IP)
Connector Types: Video Out: ST type.
Control Input/Output: ST type.
Relay Output: 8-position
removable screw terminal block.
Communication
Protocol Hardware:
6
SOFTWARE OPERATION (ViconNet)
Network Setup:
Standard network protocol type
using IP addressing scheme and
separate PC application
software.
Site Authorization:
Camera can be setup using
remote recorder or workstation
GUI. Permissions can be
assigned for macro create &
edit, alarm setup, Authentication,
Reports and System Status.
Supports up to 20 Groups and
100 Users.
Macro Create & Edit:
System macros can be
configured to use the camera’s
video. In addition, within macros,
alarms can be sent and remote
macros run.
Alarm Setup:
An alarm can be triggered on
video motion detection and loss.
The alarm can be sent to remote
units.
Authentication:
The video from the camera can
be set to view the Authentication
status symbol (A) on the
displayed video.
Picture Quality and
FPS Priority:
Vicon’s Kollector Elite Digital
Recorders and ViconNet
Workstations.
Network Interface:
100 Mbps, TCP/IP Unicast.
Connector Types:
Video Out: RJ-45 jack.
Network: Ethernet 100Base-T
RJ-45 jack. 10/100 Mbps
required for network connection.
Relay Output: 3-position
removable screw terminal block.
Audio: 2 1/8-in. phono jacks.
CAMERA/LENS
Specifications:
Camera video can be setup to
prioritize recorded picture quality
and video FPS. Priority can be
assigned to user/macro
recording for highest requested
video quality or Master user
control.
Refer to Table 3.
VIDEO TRANSMISSION
Maximum Distances:
Coax: 1100 ft (350 m), cable
dependant.
Vicoax: 1500 ft up to 140° F
(60° C); 1000 ft up to 165° F
(74° C). RG59.
UTP: up to 3000 ft (915 m),
model dependant.
Fiber: 1 mile min.; longer
distances available dependant
on cable quality.
Technical Information
Model Numbers
SVFT-PRS22E/
SVFT-PRS22EC
SVFT-PRS23/
SVFT-PRS23C
SVFT-PRS35/
SVFT-PRS35C
Product Codes
Specifications
8768-00/8768-01
8769-00/8769-01
9103-00/9103-01
Formats
NTSC/PAL
NTSC/PAL
NTSC/PAL
Type
Color
Color
Color
Optical Zoom
22X
23X
35X
Digital Zoom
12X
12X
12X
Total Zoom
264X
276X
420X
Image Device
1/4-inch interline transfer CCD
1/4-inch interline transfer CCD
1/4-inch interline transfer CCD
Picture Elements
768(H) x 494 (V),
380,000 pixels/
752(H) x 582 (V),
438,000 pixels
768(H) x 494 (V),
380,000 pixels/
847(H) x 532 (V),
490,000 pixels
768(H) x 494 (V), 380,000 pixels/
752(H) x 582 (V), 438,000 pixels
Scanning System
2:1 interlace, 525 lines 60 fields/sec/
2:1 interlace, 625 lines 50 fields/sec
2:1 interlace, 525 lines 60 fields/sec/
2:1 interlace, 625 lines 50 fields/sec
Progressive scan or
2:1 interlace, 525 lines 60 fields/sec/
2:1 interlace, 625 lines 50 fields/sec
Sensitivity*
(22EX/23X: at 40 IRE, f/1.6;
35X: at 35 IRE, f/1.4)
0.006 fc (0.06 lux), auto 1/4s
0.09 fc (1 lux), auto 1/60s
(NTSC; 1/3s, 1/50s - PAL)
0.0009 fc (0.01 lux) auto 1/4s, IR OFF
0.009 fc (0.1 lux) auto 1/4s, IR ON
0.09 fc (1 lux) auto 1/60s, IR ON
(NTSC; 1/3s, 1/50s - PAL)
0.0009 fc (0.01 lux) auto 1/4s, IR OFF
0.014 fc (0.15 lux) auto 1/60s, IR OFF
0.003 fc (0.033 lux) auto 1/4s, IR ON
0.05 fc (0.5 lux) auto 1/60s, IR ON
(NTSC; 1/3s, 1/50s - PAL)
Horizontal Resolution
470 TV lines (color)
540 TV lines (color)
540 TV lines
S/N Ratio
More than 50 dB
More than 50 dB
50 dB
Synchronization
Internal/External
(line lock on AC line)
Internal/External
(line lock on AC line)
Internal/External
(line lock on AC line)
Automatic Gain Control
(AGC)
Adjustable to 30 dB
Adjustable to 30 dB
Adjustable to 30 dB
Backlight Compensation
Software adjustable background
video level
Software adjustable background
video level
ON/OFF
Iris Control
Automatic/Manual
Automatic/Manual
Automatic/Manual
Wide Dynamic Range
N/A
OFF/ON (Auto or Manual)
OFF/ON (Auto or Manual)
Digital Noise Reduction
NA
Yes
NA
EIS (Image Stabilizer)
N/A
N/A
Yes (with digital zoom)
Video Focus
Automatic/Manual
1.0 m (tele ) - 0.01 m (wide)
Automatic/Manual
1.0 m (tele ) - 0.01 m (wide)
Automatic/Manual
White Balance
Automatic/Manual
Red/Blue Gain Level
Automatic/Manual
Red/Blue Gain Level
Automatic/Manual;
Red/Blue Gain Level
Shutter Speed (sec)
Auto (DSS): 1/2-1/4000
Man:1/2-1/30K/Auto (DSS): 1/1.51/4000 Man:1/1.5-1/30K
Auto (default): 1/60-1/4K
Auto (DSS): 1/2-1/4K Man:1/2-1/30K/
Auto (default): 1/50-1/4K
Auto (DSS): 1/1.5-1/4K
Man:1/1.5-1/30K
Auto (default): 1/60-1/4K
Auto (DSS): 1/2-1/4K Man:1/1-1/30K
Auto (default): 1/50-1/4K
Auto (DSS): 1/1.5-1/4K
Man:1/0.75-1/30K
Lenses
Focal Length
4 - 88 mm
3.6 - 82.8 mm
3.4 – 119 mm
Aperture max
f/1.6
f/1.6
f/1.4
Horizontal Angle of View
47° wide, 2.2° tele
54° wide, 2.5° tele
55.8° wide, 1.7° tele
* For day/night cameras, IR ON is color mode; IR OFF is B&W mode
Table 3: Camera/Lens Specifications
7
Copyright  2012 Vicon Industries Inc. All rights reserved
Vicon and its logo are registered trademarks of Vicon Industries Inc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising