Din Leverandør

Din Leverandør
Din Leverandør
Automation for sign makers
Via dell'Industria, 11 - 31014 Colle Umberto (TV) ITALY
Tel. +39 0438 38565 - Fax +39 0438 38767 www.flexa.it
flexa@flexa.it
Main Catalog 2014.01
Effective from the 14th of July 2014
CONTENTS
LAMINATING
PROFESSIONAL hot and cold LAMINATORS for plastification, lamination and mounting of prints
on panels. Heat Press for Transfer on Fabrics.
PROFESSIONAL LAMINATORS FOR ROAD SIGNS
Machines to apply self-adhesive reflective material to metal sheets and signs.
CUTTING
ROLL CUTTERS Machines for rapid and precise slitting of material in rolls.
VERTICAL PANEL SAWS For cutting of panels (wood, composite materials, methacrylate, PVC,
etc.).
KEENCUT CUTTERS Horizontal and vertical units for cutting lightweight panels and trimming of
prints.
ULTRASONIC CUTTING SYSTEM. For fabrics and nonwoven fabrics.
AUTOMATIC ROTATING TRIMMERS Print finishing machines.
SLITTER Machine for slitting self-adhesive films (half-cut).
BENDING AND FINISHING OF THERMOPLASTIC MATERIALS
LINEAR HEATING UNITS "PGM" Equipment for the hot-bending of thermoplastic material (e.g.
methacrylates, polycarbonates).
COOLING SYSTEMS
FLAME POLISHING SYSTEMS For finishing of plastic plates.
EDGE GRINDING - POLISHING MACHINES (with milling diamond tool).
ANTISTATIC EQUIPMENTS Ionised air guns, antistatic fibre material
MACHINES AND COMPLEMENTARY EQUIPMENT
REWINDERS
EDGE BANDING MACHINES
DRYERS FOR DIGITAL PRINTING SYSTEMS
WELDING MACHINES for PVC BANNERS AND FABRICS
EYELET MACHINES and FITTING ACCESSORIES
ROLL UNWINDING UNITS
ROLL DISPLAY (HOLDING DEVICE)
CUTTING MATS, HAND ROLLERS, FELT SQUEEGES, MAGNETS, SAFETY CUTTING RULERS,
CORNER ROUNDERS
DISTRIBUTION PRODUCT
1
Copyright © 2013 FLEXA SRL. All rights reserved. Tutti i diritti riservati.
Automation for sign makers
Via dell'Industria, 11 - 31014 Colle Umberto (TV) ITALY
Tel. +39 0438 38565 - Fax +39 0438 38767 www.flexa.it
flexa@flexa.it
Main Catalog 2014.01
HOT LAMINATORS
MILLENNIUM III
Laminator for hot and cold double sided lamination and panel mounting, for medium and
large production runs.
- Working width 2100/1600 mm - two different models
- Two pairs (lamination and rear traction) of high-release vulcanised silicone-coated
rollers (Ø 130 mm)
- Motorized lifting of upper roller (max thickness 40 mm)
- 7 roll shafts with electromagnetic brakes and clutches, and ESABLOCK roll locking
system
- Vacuum feed-in table
- Electronic control of speed (0 - 5 m/min), pressure, temperature and clutch
settings
- Automatic check-up of safety functions before starting
- Cooling fans for perfect flatness of laminated prints
- Separate temperature adjustment on upper and lower roller
- Five memories to store control settings and functions
- Automatic function for material loading
- Preset of start time (with external timer)
- Two rear slitters for side trimming of laminated prints
Power supply 3Ph 400V 50Hz - Max. Consumption 8 kW
REF.
010400300
010400010
MILLENNIUM III 210 [roll Ø 130 mm]
MILLENNIUM III 160
Special rubber for the cleaning of silicone rollers
COLD LAMINATORS
FORMULA 210
Laminator for double sided media, for cold laminating materials (adhesive film),
application tape, coloured film, images mounting on panels.
-
Working width 2100 mm
High-release special silicone-coated rollers (Ø 150 mm)
Manual lifting of upper roller: max. open space 60 mm
5 shafts with ESABLOCK roll locking system
Increased distance between shafts to support Ø 300 mm media rolls
Electronic speed control device, speed from 0 to 10 m/min
Automatic check-up of all safety functions before starting
Digital pressure display
Micrometric display of the distance between rollers
Front unwinding shaft to unwind images on roll
Heated upper roller (30° - 40° - 50° C) - optional
Power supply 1Ph. 230V 50Hz - Max. consumption 400W (4 kW with heated roller)
REF.
010300300
FORMULA 210
Options :
610400010
Heated upper roller (from 0°C to 120°C with digital temperature control)
Heated upper roller (30° - 40° - 50°C presets)
Heated lower roller (30° - 40° - 50°C presets)
Front tray for prints
Feed-in guide
Motorized lifting of upper roller
610200010
Cutting bar with 2 knives
(to trim sides of film during lamination )
610100010
610100020
610100030
610300010
610300090
2
Copyright © 2013 FLEXA SRL. All rights reserved. Tutti i diritti riservati.
Automation for sign makers
Via dell'Industria, 11 - 31014 Colle Umberto (TV) ITALY
Tel. +39 0438 38565 - Fax +39 0438 38767 www.flexa.it
flexa@flexa.it
Main Catalog 2014.01
FORMULA 160
Laminator for double sided media, for cold laminating materials (adhesive film),
application tape, coloured film, images mounting on panels.
-
Working width 1600 mm
High-release special silicone-coated rollers (Ø 150 mm)
Manual lifting of upper roller: max. open space 45 mm
5 roll shafts with ESABLOCK roll locking system
Increased distance between shafts to support Ø 300 mm media rolls
Electronic speed control device, speed from 0 to 10 m/min
Automatic check-up of all safety functions before starting
Digital pressure display
Micrometric display of roller distances
Front unwinding shaft to unwind images on roll
Heated upper roller (30° - 50° - 110° C preset) - standard supplied
Power supply 1Ph. 230V 50Hz - Max. consumption 4 kW
REF.
010300010
FORMULA 160
Options :
610100130
heated upper roller (from 0°c to 120°c with digital temperature control)
610100040
Heated lower roller (30° - 50° - 110°C presets)
Front tray for prints
Feed-in guide (to keep media flat)
Motorized lifting of upper roller
Cutting bar with 2 knives
(to trim sides of film during lamination)
610300020
610300100
610400010
610200020
COLD LAMINATORS
EASY 210
Laminator for double sided media, for cold laminating, application tape, coloured film,
images mounting on panels.
-
Working width 2100 mm
g e ease rubber-coated
ubbe coated rollers
o e s (Ø 130
30 mm))
High-release
Manual lifting of upper roller (max. open space 40 mm)
3 roll shafts with ESABLOCK roll locking system (2 unwinders with brake, 1
rewinder with clutch)
- Electronic speed control device from 0 to 10 m/min
- Heated upper roller (30° - 40° - 50° C preset) - optional
- Automatic check-up of all safety functions before starting
- Working pressure gauge
Power supply 1Ph. 230V 50Hz - Max. consumption 400W (4kW with heated roller)
REF.
010100600
EASY 210
Options :
610300150
Heated upper roller (30° - 40° - 50°C preset)
Front tray for prints
Feed-in guide (to keep media flat)
Motorized lifting of upper roller
Vacuum feed-in table for flat even feeding of thin media
Cutting bar with 2 knives
(to trim sides of film during lamination )
Positioning angle including front rail
610500010
Additional front unwinding shaft with brake and passing bar
610500050
Additional rear rewinding shaft with clutch and shedding bar
610100050
610300030
610300110
610400020
610550010
610200010
3
Copyright © 2013 FLEXA SRL. All rights reserved. Tutti i diritti riservati.
Automation for sign makers
Via dell'Industria, 11 - 31014 Colle Umberto (TV) ITALY
Tel. +39 0438 38565 - Fax +39 0438 38767 www.flexa.it
flexa@flexa.it
Main Catalog 2014.01
EASY 160
Laminator for double sided media, for cold laminating, application tape, coloured film,
images mounting on panels.
-
Working width 1600 mm
High release rubber-coated rollers (Ø 130 mm)
Manual lifting of upper roller (max. open space 40 mm)
3 roll shafts with ESABLOCK roll locking system (2 unwinders with brake, one
rewinder with clutch)
- Electronic speed control device from 0 to 10 m/min
- Heated upper roller (30° - 40° - 50° C) as standard equipment
- Automatic check-up of all safety functions before starting
- Working pressure gauge
Power supply 1Ph. 230V 50Hz - Max. consumption 4kW
REF.
010100300
EASY 160
Options :
610300160
Front tray for prints
Feed-in guide (to keep media flat)
Powered lifting of upper roller
Vacuum feed-in table
Cutting bar with 2 knives
(to trim sides of film during lamination )
Positioning angle including front rail
610500020
610500060
Additional front unwinding shaft with brake and passing bar
Additional rear rewinding shaft with clutch and shedding bar
610300040
610300120
610400020
610550020
610200020
COLD LAMINATORS
EASY 140
Laminator for double sided media, for cold laminating, application tape, coloured film,
g
g on p
images
mounting
panels.
-
Working width 1400 mm
High-release rubber-coated rollers (Ø 130 mm)
Manual lifting of upper roller: (max. open space 40 mm)
3 roll shafts with ESABLOCK roll locking system (2 unwinders with brake, 1 rewinder
with clutch)
- Electronic speed control device from 0 to 10 m/min
- Heated upper roller (30° - 40° - 50° C) as standard equipment
- Automatic check-up of all safety functions before starting
- Working pressure gauge
Power supply 1Ph. 230V 50Hz - Max. consumption 4kW
REF.
010100010
EASY 140
Options :
610300050
610300130
610400020
610200030
610300170
610500030
610500070
Front tray for prints
Feed-in guide (to keep media flat)
Powered lifting of upper roller
Cutting bar with 2 knives
(to trim sides of film during lamination )
Positioning angle including front rail
Additional front unwinding shaft with brake and passing bar
Additional rear rewinding shaft with clutch and shedding bar
4
Copyright © 2013 FLEXA SRL. All rights reserved. Tutti i diritti riservati.
Automation for sign makers
Via dell'Industria, 11 - 31014 Colle Umberto (TV) ITALY
Tel. +39 0438 38565 - Fax +39 0438 38767 www.flexa.it
flexa@flexa.it
Main Catalog 2014.01
EASY LITE 160
Laminator for double sided media, for cold laminating, application tape, coloured film,
images mounting on panels.
-
Working width 1600 mm
High-release rubber-coated rollers (Ø 115 mm)
Manual lifting of upper roller (max. open space 30 mm)
Electronic speed control device from 0 to 5 m/min
Heated upper roller (30° - 40° - 50° C) as standard equipment
Automatic check-up of all safety functions before starting
- Power supply 1Ph. 230V 50Hz - Max. consumption 3500 W
- Dimensions: 2100 x 680 x 1400 mm (L x W x H)
- Net weight: 182 kg
REF.
010200011
EASY LITE 160
Options :
610300060
610300140
610500080
610500040
Front tray for prints
Feed-in guide
Rear rewinding shaft
Front unwinding shaft
Easy Flow System
Easy Flow is the latest integrated system for print finishing from Flexa. It allows you to laminate and
XY cut formats directly from the material roll in ONE SINGLE WORKFLOW.
It is the simplest way you laminate and cut in the same flow, even on non-industrial applications.
Easy Flow is the perfect solution for everyone. It ensures high quality results, is fast and offers great
simplicity to use. The system accepts rolls up to 160 cm width
70500020
Easy Flow system (Easy Lite + Easy Flow connector+ Extrim 160)
LAMINATORS
GAIA
Practical, compact laminator for cold laminating, application tape, double-sided adhesives,
coloured films, images mounting on panels.
-
Working width 1100 or 800 mm - two different models
High-release silicone-coated rollers (Ø 80 mm)
Manual lifting of upper roller (max. open space 30 mm)
2 roll shafts with ESABLOCK roll locking system
Electronic speed control device from 0 to 10 m/min
Automatic check-up of all safety functions before starting
Supplied with work bench (with castors)
Power supply 1Ph. 230V 50Hz - Max. consumption 350W (2 kW with heated roller)
REF.
010500300
010500010
GAIA 110 (L 1100 mm)
GAIA 80 (L 800 mm)
Options for GAIA 110 / GAIA 80 :
610100060/610100070
610300070/610100080
610500090/610100100
Heated upper roller (30° - 40° - 50°C)
Front Tray for Prints
Back lower unwinding shaft for double-sided adhesive film
Options and accessories suitable to all Laminators:
610800160
610800010
610800150
610800110
610800120
610800130
610800140
Spare blade for cutting bar (10 pcs)
Special rubber for cleaning rollers
Brake / Clutch replacement pad
ESABLOCK locking ring Ø34,5mm for GAIA
ESABLOCK locking ring Ø48mm for previous laminators
ESABLOCK locking ring Ø50mm for up to date laminators
Elastic ring for ESABLOCK (5 pcs)
5
Copyright © 2013 FLEXA SRL. All rights reserved. Tutti i diritti riservati.
Automation for sign makers
Via dell'Industria, 11 - 31014 Colle Umberto (TV) ITALY
Tel. +39 0438 38565 - Fax +39 0438 38767 www.flexa.it
flexa@flexa.it
Main Catalog 2014.01
HEAT PRESS FOR TRANSFER ON FABRICS
SUBLIMAX
New
Heat Press for dye-sublimation suitable to:
- the heat transfer of images from sublimation paper in roll to fabric in roll
- the heat transfer of images from sublimation paper in roll to a single
piece of fabric
- the fixing of inks already printed on fabric
-
Digital colour touch-screen display (storage of up to 24 settings)
Safety Systems
Six Shafts
Automatic cooling
Pre-heating starting with timer
-
Overall dimensions: 2750 x 1650 x 1400 mm (W x H x D)
Working Height: 1000 mm
Working width: 1700 mm
Max. Temperature: 220° C
Speed: up to 2 m/min – other upon request
Power Consumption: 15 KW
Power Supply: 400 V – 3 Ph – 50/60 Kz / 3 P + N + PE
Compressed Air Supply: 6 bar
Machinery manufactured in accordance with CE Regulations
REF.
010700010
610550040
SUBLIMAX
Heat press for transfer dye sublimation prints to fabrics or fix pre-printed fabrics
Front table (for single pieces operation)
SMALL SIZE LAMINATORS
MICRO SEALER 330
Reliable and solid hot laminating machine. The innovative heating system with infrared
resistance allows to plasticize any kind of documents and pouches of any thickness from
38 to 250 micron.
-
Working width 330 mm.
4 rollers
Max. plastification thickness 0.6 mm
g speed:
p
/
Working
650 mm/min.
No-clog system
Temperature adjustment by thermostat up to 160° C
Dimensions: 500 x 200 x 110 mm (H) - Weight: 8 kg.
REF.
010650010
MICRO SEALER 330
ROLL SEALER 330
Laminator with hot and cold rollers suitable for every film thickness. Speed 1.6 m/min.
Internal shaft standard 25 mm. Other shafts available on demand in 57 and 75 mm.
-
Max. size of plastification 330 mm
Max. paper size 360 mm
Infrared heating rollers adjustable from 0 to 150° C
No-clog system
Display with default options
Rollers pressure control
Only the upper roller can be heated
Adjustable working speed from 0 to 1.6 m/min.
Adjustable temperature
Heating rollers Ø 44 mm width
Power consumption: 1100 Watts
Voltage: 220 V single-phase
Max. thickness: 5 mm
- Dimensions: 620 x 520 x 310 mm (h)
- Weight: 28 kg.
REF.
010650020
ROLL SEALER 330
6
Copyright © 2013 FLEXA SRL. All rights reserved. Tutti i diritti riservati.
Automation for sign makers
Via dell'Industria, 11 - 31014 Colle Umberto (TV) ITALY
Tel. +39 0438 38565 - Fax +39 0438 38767 www.flexa.it
flexa@flexa.it
Main Catalog 2014.01
PRIMA 72
Small electrical table top laminator suitable for laminations, mounting of panels,
application tape and much more.
-
Working width: max 720 mm
Max. input width: 750 mm
Rollers opening manually: max opening 15 mm
Electrical pedal control or panel control to feed material
Adjustable speed from 0 up to 2 m./min.
No-clog system
Roll holder with clutch device for adhesive/double sided adhesive films
Core diameter: 75 mm
Pick up shaft for liner (electrical)
Rollers diameter: 70 mm.
Voltage: 220 V single-phase
Power consumption: 1000 W
Dimensions: 810 x 310 x 300 mm WHD - Weight: 45 kg.
REF.
010650030
PRIMA 72
SMALL SIZE LAMINATORS
PRIMA 72 C
Small electrical table top laminator with 50° C heated upper roller, suitable for
laminations, mounting of panels, application tape and much more.
-
Working width: max 720 mm
Max. input width: 750 mm
Upper roller with heating (50° C)
Rollers opening manually: max opening 15 mm
Electrical pedal control or panel control to feed material
Adjustable speed from 0 up to 2 m./min.
No-clog system
Roll holder with clutch device for adhesive/double sided adhesive films
Core diameter: 75 mm
Pick up shaft for liner (electrical)
Rollers diameter: 70 mm.
Voltage: 220 V single
phase
single-phase
Power consumption: 1000 W
Dimensions: 810 x 310 x 300 mm WHD - Weight: 45 kg.
REF.
010650040
PRIMA 72 C
POUCHES (CONSUMABLE)
REF.
065700010
065700020
065700030
065700100
065700110
065700120
065700200
065700210
065700230
065700240
065700300
065700310
POUCHES 80 micron (100 bags / pack)
154 x 216 mm (A5)
216 x 303 mm (A4)
300 x 420 mm (A3)
Note: other sizes available on demand
POUCHES 100 micron (pack 100 sheets)
111 X 154 mm (A6)
216 x 303 mm (A4)
300 x 420 mm (A3)
Note: other sizes available on demand
POUCHES 125 micron (pack 100 sheets)
111 X 154 mm (A6)
154 x 216 mm (A5)
216 x 303 mm (A4)
300 x 420 mm (A3)
Note: other sizes available on demand
POUCHES 175 micron (pack 100 sheets)
216 x 303 mm (A4)
300 x 420 mm (A3)
Note: other sizes available on demand
7
Copyright © 2013 FLEXA SRL. All rights reserved. Tutti i diritti riservati.
Automation for sign makers
Via dell'Industria, 11 - 31014 Colle Umberto (TV) ITALY
Tel. +39 0438 38565 - Fax +39 0438 38767 www.flexa.it
flexa@flexa.it
Main Catalog 2014.01
FLATBED LAMINATORS - ROLLSROLLER
DISTRIBUTION PRODUCT
ROLLSROLLER
Flatbed laminator, especially designed to apply foils and all types of self-adhesive vinyl on
a wide variety of materials. You get precise mounting results free of bubbles and creases.
XXL formats can be easily performed by a single operator. ROLLSROLLER basically
consists of a table and a pneumatically activated roller (integrated in the glide beam).
- Working bench made of tempered glass, equipped with a special rubber cutting mat
- Light table - light from underneath work table (standard supplied on Premium models;
optional on Basic models - except the 280/145 MDF; not available on Traffic)
- Media storages (optional for Basic models)
- Powder-painted steel frame on wheels
- Adjustable roller height
- Pressure control device
- 2 Emergency buttons
- Table length: 2800 - 3400 - 4000 - 5400 - 6050 - 10080 mm
- Max. space between table surface and roller: 60 mm (optional 100 mm)
REF.
010600020
ROLLSROLLER 280/145
REGULAR
010600030
ROLLSROLLER 340/145
REGULAR
010600090
ROLLSROLLER 340/170
REGULAR
010600040
ROLLSROLLER 400/145
REGULAR
010600300
ROLLSROLLER 400/170
REGULAR
010600200
010600310
010600320
010600400
010600330
010600340
ROLLSROLLER 400/145 PREMIUM
Light table + lateral side pockets for
ROLLSROLLER 400/170 PREMIUM
Light table + lateral side pockets for
ROLLSROLLER 540/170 PREMIUM
Light table + lateral side pockets for
ROLLSROLLER 540/220 PREMIUM
Light table + lateral side pockets for
ROLLSROLLER 605/170 PREMIUM
Light table + lateral side pockets for
ROLLSROLLER 1080/170 PREMIUM
Light table + lateral side pockets for
010600100
ROLLSROLLER 280/145 ENTRY
010600110
ROLLSROLLER 340/145 ENTRY
media storage included
media storage included
media storage included
media storage included
media storage included
media storage included
610800090
Long Reach Cutter 90 cm
Long Reach Cutter 60 cm
610400030
Adjustable work height 4 legs (750-1100mm) only when ordering
610400040
Adjustable work height 6 legs (750-1100mm) only when ordering
650400070
Cutting mat 280/145
Cutting mat 340/145
Cutting mat 340/170
Cutting mat 400/145
Cutting mat 400/150
Cutting mat 400/170
Cutting mat 540/170
Cutting mat 540/220
Cutting mat 605/170
Cutting mat 605/220
Cutting mat 1080/170
Cutting mat 1080/220
Extended roller height adjustment 100 mm (only when ordering)
Glide beam 145 with roller
Glide beam 150 with roller
Glide beam 170 with roller
Glide beam 220 with roller
Illumination 280/145b (only when ordering)
Illumination 340/145b (only when ordering)
Illumination 340/170b (only when ordering)
Illumination 400/145b (only when ordering)
Illumination 400/170b (only when ordering)
Media roll holder for side pocket (2 pcs)
Media roll holder set 145, bed end
Media roll holder set 150, bed end
Media roll holder set 170, bed end
Media roll holder set 220, bed end
Grey Silent Compressor for Rollsroller 230V/50Hz (45db)
610800080
650400080
650400180
650400090
650400190
650400100
650400110
650400120
650400130
650400140
650400150
650400160
610100120
610100080
610100090
610100100
610100110
610560010
610560020
610560050
610560030
610560040
610500150
610500110
610500120
610500130
610500140
610800020
8
Copyright © 2013 FLEXA SRL. All rights reserved. Tutti i diritti riservati.
Automation for sign makers
Via dell'Industria, 11 - 31014 Colle Umberto (TV) ITALY
Tel. +39 0438 38565 - Fax +39 0438 38767 www.flexa.it
flexa@flexa.it
Main Catalog 2014.01
FLATBED LAMINATORS FOR ROAD SIGNS ROLLSROLLER
DISTRIBUTION PRODUCT
ROLLSROLLER
Traffic' is a special Rollsroller model for road sign manufacturers. The table surface is
made of aluminum sections to allow the positioning of profiled road signs.
-
Working bench with special configuration (aluminium sections)
Media holders (on one side only)
Steel frame, powder-painted and on wheels
Adjustable working height
Pressure control device
Emergency button
- Working area max. lenght 2800 - 3400 - 4000 - 5400 - 6050 - 10080 mm
- Max. space between working area/roller 60 mm (optional 100 mm)
REF.
010600060
010600080
610100080
610100090
610100100
610100110
ROLLSROLLER 400/145 TRAFFIC
ROLLSROLLER 600/145 TRAFFIC
Glide
Glide
Glide
Glide
beam
beam
beam
beam
145
150
170
220
with
with
with
with
roller
roller
roller
roller
MNL SIGN
Laminator for road sign manufactures and suitable to many other industrial applications.
- Working width 1700 - 1500 - 1300 mm - three different models
- Lower roller made of steel and upper roller coated with vulcanised rubber
(Ø 130 mm)
- Manual lifting of upper roller (max thickness 50 mm)
- 2 roll shafts with ESABLOCK roll locking system
- Electronic speed control device from 0 to 6 m/min
- Anti-crushing photo-sensitive device and emergency buttons
- Working pressure gauge
- Pedal control systems on mobile control with forward and reverse controls
- Optional moulds for traffic signs
- Power supply 1Ph. 230V 50Hz
- Max. consumption 500W
REF.
010550400
010550300
010550200
610800030
MNL SIGN 1700
MNL SIGN 1500
MNL SIGN 1300
MDF moulds for traffic signs (each)
Special machine made on demand. MNL Profile is a laminator particularly useful for road
sign makers. It can be used for the application of reflective films on aluminium profiles.
-
Working width 600 mm
Maximum open space between rollers 40 mm
Adjustable to different profiles dimensions
Speed from 1 to 5 m/min (electronically adjustable)
- Power Supply 380 V 50 Hz 1500 W
special
MNL ALUMINUM PROFILE (custom machine)
9
Copyright © 2013 FLEXA SRL. All rights reserved. Tutti i diritti riservati.
Automation for sign makers
Via dell'Industria, 11 - 31014 Colle Umberto (TV) ITALY
Tel. +39 0438 38565 - Fax +39 0438 38767 www.flexa.it
flexa@flexa.it
Main Catalog 2014.01
WIDE-FORMAT ROLL CUTTER
TITAN T600
Special roll-cutting machine with motorized rotating blade for wide format rolls of
different materials, such as PVC Banners, protective films etc. - up to 6 m width.
Very easy to use, requires just one operator for any cutting operation.
Materials can be easily loaded thanks to the very low position of the working roll, easy to
reach with the help of hydraulic equipment.
-
Rotating roll shafts adjustable for different roll diameters
Manual movement of cutting unit (XY) with pneumatic locking
Digital display counter
Blade Ø 500 mm – 2800 rpm
Automatic removal of cutting waste if fittet to external extraction system
Max. external diameter of the roll to be cut: 400 mm
Alarmsystem with blinking indicators
- Main power supply 400V (3P) – max. consumption 8 kW
- Separate air compressor and dust extractor required (not supplied) - 6 Bar
- Size: 6500 x 1600 x 1300 mm; weight 600 Kg
- Machinery manufactured according to CE standards
REF.
015500010
TITAN T600
Spare-Parts :
615200130
Spare blade for TITAN [d. 500 x 5.5/3x7 x 30 - Z40]
Packaging not included
TESIS/TESIS-R
TESIS R 3300 con Ribobinatore
Special roll cutter for wide format rolls including rewind function.
- Working widths 3300 or 5100 mm - 2 different models
- Cutting unit with complete blade protection with progressive opening (mod. 3300,
1 cutting head; mod. 5100, 2 cutting heads)
- Max. cutting of rolls up to Ø 210 mm (Standard configuration)
Max. cutting of rolls up to Ø 270 mm (Option) by replacing cutting unit with
pneumatic safety guard system
- Standard roll shaft (76 mm) with replaceable sleeves; option: different diameter
shafts
- Pneumatic
off metal
P
ti closing
l i
t l spindle
i dl with
ith expansion
i
ttabs
b
- Adjustable support for shaft / roll during cutting
- Electronic adjustment of cutting and rewinding speed (from 0 to 180 rpm)
- Mobile control unit with digital Control Panel
- Pedal start control for rewinding (only with Tesis R)
- Digital display of cutting width and rewinding length
- Easy loading system for heavy rolls
- Blade lubrication system with push button on the handle of the cutting assembly
- Separate rewinder to rewind master roll on TESIS-R models
Power supply 3PH 400V 50Hz - Max. consumption 2200 W
REF.
015100600
015200600
015200610
Special TESIS 5100 Roll cutter
Special TESIS-R 5100 Roll cutter (without unwinding unit)
Special TESIS-R 5100 Roll Cutter & Rewinder (complete)
Packaging not included
015100400
015200400
015200410
Special TESIS 3300 Roll cutter
Special TESIS-R 3300 Roll cutter (without unwinding unit)
Special TESIS-R 3300 Roll cutter / rewinder (complete)
Packaging not included
Options :
615500010
615600030
615550010
615600040
Oversized cutting assembly Ø 270 mm
(Guard with pneumatic opening system and blade Ø 385 mm)
Mobile tailstock assembly (to use shorter shafts)
Braking assembly for cutting blade (single unit)
Intermediate roll support on ball-bearing sliding unit
Spare parts and accessories:
615100070
615100080
213404411
213404421
615200010
615200020
615200040
615200050
615800020
-
Complete shaft with sleeve Ø 76 mm (3”), L 3300 mm
Complete shaft with sleeve Ø 76 mm (3”), L 5100 mm
Spare shaft sleeve for core Ø 76 mm (3”), L 3300 mm
Spare shaft sleeve for core Ø 76 mm (3”), L 5100 mm
Spare blade Ø 315 mm 2 ch., 5 mm thick for normal roll cutting max. ø 210 mm
Spare blade Ø 315 mm 1 ch., 5 mm thick for thin roll cutting max. ø 210 mm
Spare blade Ø 385 mm 2 ch., 5 mm thick for normal roll cutting max. ø 270 mm
Spare blade Ø 385 mm 1 ch., 5 mm thick for thin roll cutting max. ø 270 mm
Water soluble silicone – 1 lit. bottle (200 cc/ 5 l)
Blade re-sharpening
10
Copyright © 2013 FLEXA SRL. All rights reserved. Tutti i diritti riservati.
Automation for sign makers
Via dell'Industria, 11 - 31014 Colle Umberto (TV) ITALY
Tel. +39 0438 38565 - Fax +39 0438 38767 www.flexa.it
flexa@flexa.it
Main Catalog 2014.01
AUTOMATIC ROLL CUTTER
STRATOS
Completely automatic equipment for a quick and precise cut of vinyl films, reflective
sheeting, different kind of application tape, polyethylene, polypropylene and other
materials wound up in rolls. It works controlled through a dedicated PLC that allows to
set many parameters using the front keyboard. The same roll can be cut in different width
during the same slitting operations. The display shows all settings and system alarms.
-
Automatic or manual mode
Adjustable parameters
Spindle speed regulation
Blade assembly movement (left/right)
Blade assembly cutting speed and strength
Lubrication time (on/off and cyclical time )
Quantity and width of pieces to slit (the display shows also the pieces already cut)
Blade cutting angle (manually adjustable)
Swing away cutting shaft for 3” cores (76 mm) with replaceable sleaves
Pneumatic tailstock
Pneumatic spindle expansion
Very precise movement of blade assembly controlled by brushless motor
Max cutting diameter 320 mm
Max roll width 1600 mm
Max cutting width 1535 mm
- Power supply three phase 400 V 50 Hz 3000 W
- Overall dimensions 2700 x 1200 x 1800 h mm - Weight 600 Kg
REF.
015400010
STRATOS automatic roll-cutter with swing-away support shaft (L 1600 mm)
Packaging not included
SINTESI
Completely automatic machine, managed through an industrial PC, either in the control
and operational part, it instantly elaborates the phase of the task in execution through a
graphic support on the touch-screen. This control manages 5 motorized shafts. Once the
parameters of beginning operation is set
set, the machine automatically works on the roll up
to the final phase, automatically modifying inclinations and cut speed to get high quality
results.
The cutting system is based on a circular blade (smooth or toothed) that penetrates into
the material wound up in the master roll, cutting them in shorter rolls.
-
Roll width 2200 mms
High power electric spindle, with pneumatic self-locking system
Digital speed adjustment of the spindle
Digital speed adjustment of the blade
Machine completely protected by a metallic frame with load and unload doorways
Work phases showed through a graphic model on screen
REF.
015550010
SINTESI automatic roll-cutter machine (L 2000 mm) with brushless motorisation on 5 shafts
Packaging not included
N.B.: delivery time 8 weeks - circumstances permitting - from date of order confirmation for special and/or
11
Copyright © 2013 FLEXA SRL. All rights reserved. Tutti i diritti riservati.
Automation for sign makers
Via dell'Industria, 11 - 31014 Colle Umberto (TV) ITALY
Tel. +39 0438 38565 - Fax +39 0438 38767 www.flexa.it
flexa@flexa.it
Main Catalog 2014.01
ROLL CUTTER & REWINDER
TESIS-R
Machine which combines the operations of rewinding and cutting of materials in rolls.
- Working width 1700 or 2300 mm
- Cutting assembly featuring entirely protected blade with progressive uncovering
- Max. cutting of rolls up to Ø 210 mm (Standard configuration)
Max. cutting of rolls up to Ø 270 mm (Option) by replacing cutting unit with
pneumatic safety guard system
- Roll shaft for standard 76 mm core with replaceable sleeves; easily adapted for
the cutting of cores with different diameters (57/55 mm) with shafts availble on
request
- Rubber-coated spindle with pneumatic locking system
- Roll shaft for rewinding operations with ESABLOCK roll fixing system and brake, with
recessed support systems
- Electronic cutting and rewinding speed adjustment (from 0 to 370 rpm)
- Mobile control unit with digital Control Panel
- Pedal start command for rewinding
- Digital display of cutting width and rewinding length
- Easy loading system for heavy rolls
- Blade lubrication system with command on the handle of the cutting assembly
Power supply 230V 50Hz - max. consumption 1500W
REF.
015200200
015200010
TESIS R 2300 - roll cutter & rewinder
TESIS-R 1700 - roll cutter & rewinder
Options:
615500010
Oversized cutting assembly Ø 270 mm
(Guard with pneumatic opening system and blade Ø 385 mm)
615800010
+ 615400010
Pneumatic locking system for cutting unit
615550010
Mechanical clutch-brake on cutting blade
615300080
Kit spindle and Ø 25 mm (1") stainless steel shaft, L 1700
including intermediate support unit for shaft
615600020
615600010
Intermediate adjustable support unit for rolls
Intermediate support unit for shaft
Spare-Parts :
615100010
615100020
615100040
615100050
615100030
615100060
615100310
615100320
615100330
615100340
615100350
615100360
615100230
615100240
615100250
615100260
615100270
615100280
615100290
615200010
615200020
615200060
615200090
615200040
615200050
615200100
615200110
615800020
-
Complete shaft with sleeve Ø 76 mm (3"), L 1700 mm
Complete
Ø 76 mm (3"),
C
l t shaft
h ft with
ith sleeve
l
(3") L 2300 mm
Complete shaft with sleeve Ø 57 mm (2"1/4), L 1700 mm
Complete shaft with sleeve Ø 57 mm (2"1/4), L 2300 mm
Complete shaft with sleeve Ø 50 mm (2"), L 1700 mm
Complete shaft with sleeve Ø 50 mm (2"), L 2300 mm
Spare shaft sleeve Ø 76 mm (3"), L 1700 mm
Spare shaft sleeve Ø 76 mm (3"), L 2300 mm
Spare shaft sleeve Ø 57 mm (2"1/4), L 1700 mm
Spare shaft sleeve Ø 57 mm (2"1/4), L 2300 mm
Spare shaft sleeve Ø 50 mm (2"), L 1700 mm
Spare shaft sleeve Ø 50 mm (2"), L 2300 mm
Expansion spindle rubber Ø 76 mm (3")
Expansion spindle rubber Ø 57 mm (2"1/4)
Expansion spindle rubber Ø 50 mm (2")
Spindle tip protection Ø 76 mm (3")
Spindle tip protection Ø 57 mm (2"1/4)
Spindle tip protection Ø 50 mm (2")
Internal brass pawl for spindle rubber
Blade Ø 315 mm 2 ch., 5 mm thk. (normal cutting, max. Ø 210 mm)
Blade Ø 315 mm 1 ch., 5 mm thk. (thin cutting, max. Ø 210 mm)
Blade Ø 315 mm 2 ch., 3 mm thk. (normal cutting, max. Ø 210 mm)
Blade Ø 315 mm 1 ch., 3 mm thk. (thin cutting, max. Ø 210 mm)
Blade Ø 385 mm 2 ch., 5 mm thk. (normal cutting, max. Ø 270 mm)
Blade Ø 385 mm 1 ch., 5 mm thk. (thin cutting, max. Ø 270 mm)
Blade Ø 385 mm 2 ch., 3 mm thk. (normal cutting, max. Ø 270 mm)
Blade Ø 385 mm 1 ch., 3 mm thk. (thin cutting, max. Ø 270 mm)
Water soluble silicone – 1 lit. bottle (200 cc/ 5 l)
Blade re-sharpening
12
Copyright © 2013 FLEXA SRL. All rights reserved. Tutti i diritti riservati.
Automation for sign makers
Via dell'Industria, 11 - 31014 Colle Umberto (TV) ITALY
Tel. +39 0438 38565 - Fax +39 0438 38767 www.flexa.it
flexa@flexa.it
Main Catalog 2014.01
ROLL CUTTER
TESIS
Machine designed to cut material in rolls.
- Working width 1700 or 2300 mm
- Cutting assemlby featuring entirely protected blade with progressive uncovering
- Max. cutting of rolls up to Ø 210 mm (Standard configuration)
Max. cutting of rolls up to Ø 270 mm (Option) by replacing cutting unit with
pneumatic safety guard system
- Roll shaft for standard 76 mm core with replaceable sleeves; easily adapted for
the cutting of cores with different diameters (57/55 mm) with shafts availble on
request
- Rubber-coated spindle with pneumatic locking system
- Cutting speed from 0 to 370 rpm
- Control unit with digital Control Panel
- Easy loading system for heavy rolls
- Blade lubrication system with command on the handle of the cutting assembly
Power supply 3PH 400V 50Hz - Max. consumption 1500 W
REF.
015100200
015100010
TESIS 2300
TESIS 1700
Options:
615400010
615500010
615400020
Digital measurement display
Oversized cutting assembly Ø 270 mm
(Guard with pneumatic opening system and blade Ø 385 mm)
Pneumatic locking system for cutting unit
615550010
Mechanical clutch-brake on cutting blade
615300010
Kit spindle and Ø 25 mm (1") stainless steel shaft, L 1700
including intermediate support unit for shaft
615600020
615600010
615100370
615100380
615100390
615100400
Intermediate adjustable support unit for rolls
Intermediate support unit for shaft
Thesis shaft substitution kit 2"-1700mm
Thesis shaft substitution kit 2" 1/4-1700mm
Thesis shaft substitution kit 2"-2300mm
Thesis
kit 2"1/4-2300mm
Th i shaft
h ft substitution
b tit ti
2"1/4 2300
Spare-Parts :
615100010
615100020
615100040
615100050
615100030
615100060
615100310
615100320
615100330
615100340
615100350
615100360
615100230
615100240
615100250
615100260
615100270
615100280
615100290
615200010
615200020
615200060
615200090
615200040
615200050
615200100
615200110
615800020
-
Complete shaft with sleeve Ø 76 mm (3"), L 1700 mm
Complete shaft with sleeve Ø 76 mm (3"), L 2300 mm
Complete shaft with sleeve Ø 57 mm (2"1/4), L 1700 mm
Complete shaft with sleeve Ø 57 mm (2"1/4), L 2300 mm
Complete shaft with sleeve Ø 50 mm (2"), L 1700 mm
Complete shaft with sleeve Ø 50 mm (2"), L 2300 mm
Spare shaft sleeve Ø 76 mm (3"), L 1700 mm
Spare shaft sleeve Ø 76 mm (3"), L 2300 mm
Spare shaft sleeve Ø 57 mm (2"1/4), L 1700 mm
Spare shaft sleeve Ø 57 mm (2"1/4), L 2300 mm
Spare shaft sleeve Ø 50 mm (2"), L 1700 mm
Spare shaft sleeve Ø 50 mm (2"), L 2300 mm
Expansion spindle rubber Ø 76 mm (3")
Expansion spindle rubber Ø 57 mm (2"1/4)
Expansion spindle rubber Ø 50 mm (2")
Spindle tip protection Ø 76 mm (3")
Spindle tip protection Ø 57 mm (2"1/4)
Spindle tip protection Ø 50 mm (2")
Internal brass pawl for spindle rubber
Blade Ø 315 mm 2 ch., 5 mm thk. (normal cutting, max. Ø 210 mm)
Blade Ø 315 mm 1 ch., 5 mm thk. (thin cutting, max. Ø 210 mm)
Blade Ø 315 mm 2 ch., 3 mm thk. (normal cutting, max. Ø 210 mm)
Blade Ø 315 mm 1 ch., 3 mm thk. (thin cutting, max. Ø 210 mm)
Blade Ø 385 mm 2 ch., 5 mm thk. (normal cutting, max. Ø 270 mm)
Blade Ø 385 mm 1 ch., 5 mm thk. (thin cutting, max. Ø 270 mm)
Blade Ø 385 mm 2 ch., 3 mm thk. (normal cutting, max. Ø 270 mm)
Blade Ø 385 mm 1 ch., 3 mm thk. (thin cutting, max. Ø 270 mm)
Water soluble silicone – 1 lit. bottle (200 cc/ 5 l)
Blade re-sharpening
13
Copyright © 2013 FLEXA SRL. All rights reserved. Tutti i diritti riservati.
Automation for sign makers
Via dell'Industria, 11 - 31014 Colle Umberto (TV) ITALY
Tel. +39 0438 38565 - Fax +39 0438 38767 www.flexa.it
flexa@flexa.it
Main Catalog 2014.01
ROLL CUTTER
TGE
Machine designed to cut material in rolls.
- Working width 1600 or 2100 mm
- Max. cutting diameter 210 mm
- Roll shaft support with interchangeable sleeve and expansion spindle for cutting on
standard 76 mm core;
- Freely interchangeable support shafts and spindle for 50 and 57 mm cores available
on request
- Fixed cutting speed (electrical rotation of spindle at 370 rpm)
- Blade totally protected with progressive uncovering
- Starting button on the handle of the blade support
- Scale (millimeter) to show position of cutting tool
Power supply 230V 50Hz - max. consumption 1500W
REF.
015300200
015300010
TGE 2100 (L 2100 mm)
TGE 1600 (L 1600 mm)
Options:
615550020
615400010
615600050
615300020
615100410
615100420
615100430
615100440
Mechanical brake for circular blade
Digital measurement display
Intermediate support unit for shaft
Kit Spindle and Ø 25 mm (1") steel shaft L 1600,
TGE Shaft substitution kit 2" -1600mm
TGE Shaft substitution kit 2" 1/4-1600mm
TGE Shaft substitution kit 2" -2100mm
TGE Shaft substitution kit 2"1/4 -2100mm
Spare parts:
615100090
Complete shaft with sleeve Ø 76 mm (3"), L 1600 mm
615100120
Complete shaft with sleeve Ø 76 mm (3"), L 2100 mm
615100100
Complete shaft with sleeve Ø 57 mm (2"1/4) L 1600 mm
615100130
Complete shaft with sleeve Ø 57 mm (2"1/4), L 2100 mm
615100110
Complete shaft with sleeve Ø 50 mm (2") L 1600 mm
615100140
p
Complete
shaft with sleeve Ø 50 mm ((2")) L 2100 mm
615100150
Spare shaft sleeve Ø 76 mm (3") L 1600 mm
615100160
Spare shaft sleeve Ø 76 mm (3") L 2100 mm
615100170
Spare shaft sleeve Ø 57 mm (2"1/4) L 1600 mm
615100180
Spare shaft sleeve Ø 57 mm (2"1/4) L 2100 mm
615100190
Spare shaft sleeve Ø 50 mm (2") L 1600 mm
615100200
Spare shaft sleeve Ø 50 mm (2") L 2100 mm
615100230
Expansion spindle rubber Ø 76 mm (3")
615100240
Expansion spindle rubber Ø 57 mm (2"1/4)
615100280
Expansion spindle rubber Ø 50 mm (2")
615100260
Spindle tip protection Ø 76 mm (3")
615100270
Spindle tip protection Ø 57 mm (2"1/4)
615100280
Spindle tip protection Ø 50 mm (2")
615100290
Internal brass pawl for spindle rubber
455700030
Expansion spindle handwheel
615200120
Blade Ø 245 mm 2 ch., 5 mm thk. (normal cutting, max. Ø 210 mm)
615200030
Blade Ø 245 mm 1 ch., 5 mm thk. (thin cutting, max. Ø 210 mm)
615200080
Blade Ø 245 mm 2 ch., 3 mm thk. (normal cutting, max. Ø 210 mm)
615200070
Blade Ø 245 mm 1 ch., 3 mm thk. (thin cutting, max. Ø 210 mm)
615800020
Water-soluble silicone - bottle 1 l (200 cc/ 5 l)
615800030
-
Silicone spray can (500 cl)
Blade re-sharpening
14
Copyright © 2013 FLEXA SRL. All rights reserved. Tutti i diritti riservati.
Automation for sign makers
Via dell'Industria, 11 - 31014 Colle Umberto (TV) ITALY
Tel. +39 0438 38565 - Fax +39 0438 38767 www.flexa.it
flexa@flexa.it
Main Catalog 2014.01
REWINDERS
MASTER ROLL 150
Unwinding machine - to create a shorter roll from a long one.
-
Working width of roll 1500 mm (positioned vertically in this model)
Maximum diameter of roll 240 mm, core 76 mm
Standard supplied with adapter for rolls with core diameter 50 mm
Maximum weight of roll 50 kg
Compact vertical structure (700 x 550 x h 1600 mm)
Electronic speed adjustment
Digital display of rewinding length with programmable stop
Automatic locking system on shaft
Power supply 230V 50Hz - max. consumption 500 W
REF.
020100010
615850010
MASTER ROLL 150
Special extension for Master ROLL 150
(for higher rolls)
MASTER ROLL MAXI
Special customised versions
Special unwinding machine - to create a shorter roll from a long one.
-
Approximate material width 1800 mm (positioned vertically)
Maximum diameter of roll 450 mm, core 76 mm
Maximum weight of roll 50 kg
Compact vertical structure
Electronic speed adjustment
Digital display of rewinding length with programmable stop
Standard supplied with adjuster for rolls with core diameter 50 mm
uto at c locking
oc g system
syste o
s at
Automatic
on shaft
Power supply : 230/400 V 50Hz - max. consumption 1500 W
Other dimensions available on request
REF.
020300010
MASTER ROLL "MAXI"
MASTER ROLL
HORIZON
A fast and economical rewinder for pressional distributors of adhesive products and films
to manufacture custome size lenghts from original rolls (max. diameter 250 mm).
The original roll is inserted horizontally between a fixed and an adjustable bracket. After
setting the desired length (on the digital display) the film is pulled over to an empty
carton roll and the machine starts to rewind the film automatically (adjustable speed).
The machine will slow down and stop automatically as soon as the set length is reached.
In the meantime the operator is free to prepare the next order. Thanks to the ergonomic
concept of Master Roll Horizon 160 the operator can produce metratures continously
without becoming tired.
-
Width of roll approx. 1600 mm
Weight of roll 50 kg - external diameter 250 mm
Steel parts powder coated
Mounted on castors for easy positioning
Compact horizontal structure
Electronic set of speed and length of material
Gradual speed reduction before set length is reached
- Dimensions: mm 2000 x 800 x 1300 h
- Power supply 230 V 50 Hz 300 W
Manufactured on request
REF.
020200010
MASTER ROLL HORIZON 160 - max height rolls 1600 mm - max Ø 250 mm
15
(horizontal use)
Copyright © 2013 FLEXA SRL. All rights reserved. Tutti i diritti riservati.
Automation for sign makers
Via dell'Industria, 11 - 31014 Colle Umberto (TV) ITALY
Tel. +39 0438 38565 - Fax +39 0438 38767 www.flexa.it
flexa@flexa.it
Main Catalog 2014.01
METHACRYLATE BENDING DEVICE
HEATING LINE BENDING EQUIPMENTS
PGM 45/300
Equipment designed for the linear heat bending (from 0 to 180° C) of thermoplastic
sheets, such as methacrylate, PMMA, PVC, PETG, ABS, PS, etc.
- Working length 3100 mm
- Thickness of material: from 1 to 5 mm
- Made from aluminium profile section (45 mm width) with a fixed area of thermal
radiation, cooled through a water/coolant system. Water supply with or without
recycling (cooling system)
- Electronic temperature adjustment with external unit
Special accessory available for processing thin material (min. thickness 0.5 mm)
REF.
620100060
PGM 45/300 - 3000 W / 230 V
with R-Digit Digital temperature regulator (max. 4 kW)
RSC 300 Group of lateral guides with register bar
BRS 300 Supplementary register bar
620800010
Accessory for bending thin materials (0.5 mm) for PGM 45, L 300 mm
025200400
620100030
PGM 45/200
Equipment designed for the linear heat bending (from 0 to 180° C) of thermoplastic
sheets, such as methacrylate, PMMA, PVC, PETG, ABS, PS, etc.
- Working length 2100 mm
- Thickness of material: from 1 to 5 mm
- Made from aluminium profile section (45 mm width) with a fixed area of thermal
radiation, cooled through a water/coolant system. Water supply with or without
recycling (cooling system)
- Electronic temperature adjustment with external unit
Special accessory available for processing thin material (min. thickness 0.5 mm)
REF.
620100050
PGM 45/200 - 2000 W/230 V
with R-Digit Digital temperature regulator (max 4 kW)
RSC 200 Group of lateral guides with register bar
BRS 200 Supplementary register bar
620800010
Accessory for bending thin materials (0.5 mm) for PGM 45, L 300 mm
025200200
620100020
PGM 45/100
Equipment designed for the linear heat bending (from 0 to 180° C) of thermoplastic
sheets, such as methacrylate, PMMA, PVC, PETG, ABS, PS, etc.
- Working length 1050 mm
- Thickness of material: from 1 to 5 mm
- Made from aluminium profile section (45 mm width) with a fixed area of thermal
radiation, cooled through a water/coolant system. Water supply with or without
recycling (cooling system)
- Electronic temperature adjustment with external unit
Special accessory available for processing thin material (min. thickness 0.5 mm)
REF.
620100040
PGM 45/100 - 1000 W/230 V
with R-Digit Digital temperature regulator (max 4kW)
RSC 100 Group of lateral guides with register bar
BRS 100 Supplementary register bar
620800010
Accessory for bending thin materials (0.5 mm) for PGM 45, L 300 mm
025200010
620100010
16
Copyright © 2013 FLEXA SRL. All rights reserved. Tutti i diritti riservati.
Automation for sign makers
Via dell'Industria, 11 - 31014 Colle Umberto (TV) ITALY
Tel. +39 0438 38565 - Fax +39 0438 38767 www.flexa.it
flexa@flexa.it
Main Catalog 2014.01
METHACRYLATE BENDING DEVICE
HEATING LINE BENDING EQUIPMENTS
PGM 18/200
Equipment designed for the linear heat bending (from 0 to 180° C) of thermoplastic
sheets, such as methacrylate, PMMA, PVC, PETG, ABS, PS, etc.
- Working length 2100 mm
- Thickness of material: from 1 to 5 mm
- Made from aluminium profile section (18 mm width) with a fixed area of thermal
radiation, cooled through a water/coolant system. Water supply, with or without
recycling (cooling system)
- Electronic temperature adjustment with external unit
Special accessory available for processing thin material (min. thickness 0.5 mm)
REF.
025300200
620100020
620100050
620800020
PGM 18/200 - 2000 W /230 V
with R-Digit Digital temperature regulator (max. 4 kW)
RSC 200 Group of lateral guides with register bar
BRS 200 Supplementary register bar
Accessory for bending thin materials (0.5 mm) for PGM 18, L 300 mm
PGM 18/100
Equipment designed for the linear heat bending (from 0 to 180° C) of thermoplastic
sheets, such as methacrylate, PMMA, PVC, PETG, ABS, PS, etc.
- Working length 1050 mm
- Thickness of material: from 1 to 5 mm
- Made from aluminium profile section (18 mm width) with a fixed area of thermal
radiation, cooled through a water/coolant system. Water supply with or without
recycling (cooling system)
- Electronic temperature adjustment with external unit
Special accessory available for processing thin material (min. thickness 0.5 mm)
REF.
025300010
620100010
620100040
620800020
/
PGM 18/100
- 1000 W// 230 V
with R-Digit Digital temperature regulator (max 4 kW)
RSC 100 Group of lateral guides with register bar
BRS 100 Supplementary register bar
Accessory for bending thin materials (0.5 mm) for PGM 18, L 300 mm
RSC - Pair of lateral
guides with register bar
R-Digit
Electronic Digital Temperature Regulator
This electronic regulator is an indispensable accessory and must be connected to the PGM
Series 18, 45, MB and MB/MW linear heating equipments; it is supplied with a protective
box and fully wired.
- Max Power 4000 W
- Keyboard (+/-) and Digital display for regulating and showing current power
supply
- Practical and safe instant plug connections
Thanks to a new regulation concept, R-Digit keeps the power of the heating element constant regardless of
any fluctuation of the main power supply.
17
Copyright © 2013 FLEXA SRL. All rights reserved. Tutti i diritti riservati.
Automation for sign makers
Via dell'Industria, 11 - 31014 Colle Umberto (TV) ITALY
Tel. +39 0438 38565 - Fax +39 0438 38767 www.flexa.it
flexa@flexa.it
Main Catalog 2014.01
METHACRYLATE BENDING DEVICE
HEATING LINE BENDING EQUIPMENTS
PGM MB/300
Equipment designed for the linear heat bending (from 0 to 180° C) of thermoplastic
sheets, such as methacrylate, PMMA, PVC, PETG, ABS, PS, etc.
-
Working length 3100 mm.
Thickness of material from 0.5 to 10 mm.
Adjustable heating area from 0 to 60 mm
QUARTZ heating element adjustable on the working area
Made from aluminium profile section with an adjustable area of thermal radiation,
cooled through a water/coolant system. Water supply with or without
recycling (cooling system)
REF.
025100400
620100030
620100060
PGM MB/300 - 3500 W / 230 V
with R-Digit Digital temperature regulator (max 4 kW)
RSC 300 Lateral guides with register bar
BRS 300 Supplementary register bar
PGM MB/200
Equipment designed for the linear heat bending (from 0 to 180°) of thermoplastic sheets,
such as methacrylate, PMMA, PVC, PETG, ABS, PS, etc.
-
Working length 2100 mm.
Thickness of material from 0.5 to 10 mm.
Adjustable heating area from 0 to 60 mm
QUARTZ heating element adjustable on the working area
Made from aluminium profile section with an adjustable area of thermal radiation,
cooled through a water/coolant system. Water supply with or without
recycling (cooling system)
REF.
025100200
620100020
620100050
PGM MB/200 - 3500 W / 230 V
with R-Digit Digital temperature regulator (max 4 kW)
RSC 200 Lateral guides with register bar
BRS 200 Supplementary register bar
PGM MB/100
Equipment designed for the linear heat bending (from 0 to 180° C) of thermoplastic
sheets, such as methacrylate, PMMA, PVC, PETG, ABS, PS, etc.
-
Working length 1050 mm.
Thickness of material from 0.5 to 10 mm.
Adjustable heating area from 0 to 60 mm
QUARTZ heating element adjustable on the working area
Made from aluminium profile section with an adjustable area of thermal radiation,
cooled through a water/coolant system. Water supply with or without
recycling (cooling system)
REF.
025100010
620100010
620100040
PGM MB/100 - 2800 W / 230 V
with R-Digit Digital temperature regulator (max. 4 kW)
RSC 100 Lateral guides with register bar
BRS 100 Supplementary register bar
18
Copyright © 2013 FLEXA SRL. All rights reserved. Tutti i diritti riservati.
Automation for sign makers
Via dell'Industria, 11 - 31014 Colle Umberto (TV) ITALY
Tel. +39 0438 38565 - Fax +39 0438 38767 www.flexa.it
flexa@flexa.it
Main Catalog 2014.01
METHACRYLATE BENDING
HEATING LINE BENDING EQUIPMENTS
PGM MB-SW200/
MB-MW200
Heating Equipment for linear heat bending thermoplastic sheets such as thick
methacrylate and acrylic (SW200) or polycarbonate (MW200).
-
Working length 2100 mm.
Thickness of material up to 20 mm (MB-SW200).
Adjustable heating area from 0 to 60 mm
Heating element adjustable on the working area
Special QUARTZ heating element with a special wave length and a gold-plated
surface
- Made from aluminium profile section with an adjustable area of thermal radiation,
cooled through a water/coolant system. Water supply, with or without
recycling (cooling system)
REF.
025500010
PGM MB SW200 - 5000 W - 400 V (3PH)
for thick materials (max. 20 mm)
025400010
with R-Digit 400 V 3PH Digital temperature regulator
PGM MB MW200 - 3500 W - 230 V
for polycarbonate (max. thickness 10 mm)
620100020
620100050
with R-Digit Digital temperature regulator (max. 4 kW)
RSC 200 Lateral guides with register bar
BRS 200 Supplementary register bar
Structured SUPPORT BENCHES for PGM
Completed with castors and shelf
Standard support bench for heating units. It is mounted on solid castors and made of
anodized aluminium. It can be easily moved inside the working area. Equipped with a
reference bar manually adjustable that allows to mantain the set dimension when
working larger production runs. The bench can be customized on request.
-
Structure made of anodized aluminium
Frame mounted on wheels with brakes
Dimensions 3100/2250/1250 x 1500 x 830 mm
Manual reference bar
g bars for multiple
p bending
g
It is p
possible to increase the heating
REF.
025700400
025700200
025700010
620400010
620400030
620400020
620400040
620400050
PGM BENCH 3000 (3095 x 1500 x h 830 mm)
PGM BENCH 2000 (2255 x 1500 x h 830 mm)
PGM BENCH 1000 (1255 x 1500 x h 830 mm)
1
1
1
1
1
Water distributor with 10 quick connectors "Rapid"
Water distributor with 10 connectors "Eco"
Water distributor with 8 quick connectors "Rapid"
Water distributor with 8 connectors "Eco"
Universal Kit for PGM (ACC series exluced)
19
Copyright © 2013 FLEXA SRL. All rights reserved. Tutti i diritti riservati.
Automation for sign makers
Via dell'Industria, 11 - 31014 Colle Umberto (TV) ITALY
Tel. +39 0438 38565 - Fax +39 0438 38767 www.flexa.it
flexa@flexa.it
Main Catalog 2014.01
METHACRYLATE BENDING
EQUIPMENT FOR DOUBLE SIDED HEATING
PGM MB-300 ACC/
PGM MB-200 ACC
PGM MB-ACC is a linear heating unit for heat bending of both sides of thermoplastic
sheets (PMMA, PVC, PETG, ABS, PS, etc.) up to 15 mm thickness. Especially suitable for
large production runs.
-
Working length 3100 mm or 2100 mm - two different models available
Thickness of sheets from 1 to 15 mm
Adjustable heating area: from 5 to 40 mm.
QUARTZ heating elements adjustable on the working bench
Chromed-steel tubular structure connected to an external water-cooling
system (optional)
- Pneumatic lifting system for the upper heating unit, to manage the operating cycle
- The upper unit can be rotated and placed side by side with the lower unit
- Separate electronic temperature control for each heating element
- Power supply 3PH 400 V - max. consumption 4.5 + 4.5 kW / 3.5 + 3.5 kW
- Compressed air supply 4 bar
Support bench PGM MB ACC 300 with automatic stop
- Anodised aluminium structure mounted on wheels
- Automatic reference bar with direction switch, adjustable speed control and
start/stop button on control panel and display
- Front holder for small parts
- Cooling system connections ready to use
- Dimensions 3100/2100 x 1800 x 900 mm
- Lower non-scratch laminated working bench, 18 mm thick.
Electric/pneumatic control panel with motorized stop control
- General panel 500 x 400 x 200 mm with main switch
- Pressure gauge and pressure control for lifting upper unit
- Two independent electronic temperature regulators R-DIGIT for separate on/off
switching
- Operating cycle digital timer with buzzer
- Motorized stop control panel with direction switch, speed potentiometer, start/stop
button
- Controller with emergency stop and starting pedal
REF.
025550400
620300010
620300020
620400010
620400030
025550200
620300010
620300030
620400010
620400030
FLEXA ICE
PGM MB 300 ACC upper and lower units
Control board for PGM MB ACC with two digital temperature regulator
Support bench PGM MB ACC 300 with powered stopper
1 Water distributor with 10 quick connectors "Rapid"
1 Water distributor with 10 connectors "Eco"
PGM MB 200 ACC upper and lower units
Control board for PGM MB ACC with two digital temperature regulator
Support bench PGM MB ACC 300 with powered stopper
1 Water distributor with 10 quick connectors "Rapid"
1 Water distributor with 10 connectors "Eco"
COOLING SYSTEMS
A cooling system allows the PGM linear heating equipment to be used without being
connected to the main water supply. This closed-circuit system with a compressor can
cool the water circulating in the support surface of several linear heating installations.
- Adjustable temperature from 15° to 45° C
- Power supply 400 V / 3Ph / 50 Hz - 230 V / 1 PH / 50 Hz
- Consumption from 1kW to 4kW
REF.
065650050
065650040
065650030
065650020
065650010
FLEXA
FLEXA
FLEXA
FLEXA
FLEXA
ICE
ICE
ICE
ICE
ICE
10000 - 10,3 kW / 100 lt
7500 - 7,4 kW / 40 lt
5000 - 5,6 kW / 40 lt
3500 - 3,5 kW / 18 lt
1510 - 1,9 kW / 18 lt
20
Copyright © 2013 FLEXA SRL. All rights reserved. Tutti i diritti riservati.
Automation for sign makers
Via dell'Industria, 11 - 31014 Colle Umberto (TV) ITALY
Tel. +39 0438 38565 - Fax +39 0438 38767 www.flexa.it
flexa@flexa.it
Main Catalog 2014.01
POLISHING SYSTEM for METHACRYLATE
Flame polishing system
HYDRO-Flame
550A / 550M
Extremely reliable system for flame polishing methacrylates by gas produced from water
hydrolysis. Very easy to use, the 550 model (automatic) can load the water by itself with
a small pump.
-
2 TORCHES and a set of 10 pairs of nozzles standard supplied
Gas production: 550 l/h
Water consumption: 0.25 l/h
Tank capacity 0.8 l
Flame temperature: 3600° C
Weight: 90 Kg
Dimensions: 670 x 550 x 730 mm (LxDxH)
Power Supply: 220 V 50 Hz - 2500 W
Can be used by 2 operators at the same time
Modelli 550A / 550M
REF.
030100100
HYDROFLAME 550 Automatic - flame polishing machine (automatic loading)
030100110
HYDROFLAME 550 Manual - flame polishing machine (manual loading)
HYDRO-Flame 250
Extremely reliable system for flame polishing methacrylates by gas produced from water
hydrolysis. Very easy to use, like the 550m model (manual) the distilled water has to be
loaded by the operator.
-
1 TORCH and a set of nozzles standard supplied
Gas production: approx- 300 l/h
Water consumption: 0.12 l/h (tank capacity 0.4 l)
Flame temperature: 3500° C
Weight: 75 Kg
- Dimensions: 560 x 410 x 730 mm (LxDxH)
- Power Supply: 220 V 50 Hz - 2500 W
REF.
REF
030100010
HYDROFLAME 250 Manual - flame polishing machine (manual loading)
HYDRO-Flame
550/250
REF.
625100010
625100020
625100030
625100040
625100050
625100060
625100070
625100080
625100090
625100100
625100110
625100120
625100130
625100140
625100150
625100160
625100170
625100180
625100190
625100200
625100210
930501671
625100240
625100240
625100250
Large torch (standard supply)
Small torch + micro-nozzle holder
Brass nozzles 0.6 mm for Hydroflame (5 pc)
Brass nozzles 0.7 mm for Hydroflame (5 pc)
Brass nozzles 0.8 mm for Hydroflame (5 pc)
Brass nozzles 0.9 mm for Hydroflame (5 pc)
Brass nozzles 1.0 mm for Hydroflame (5 pc)
Brass nozzles 1.1 mm for Hydroflame (5 pc)
Brass nozzles 1.2 mm for Hydroflame (5 pc)
Brass nozzles 1.3 mm for Hydroflame (5 pc)
Brass nozzles 1.4 mm for Hydroflame (5 pc)
Brass nozzles 1.5 mm for Hydroflame (5 pc)
Copper nozzles 1.0 mm for Hydroflame (5 pc)
Copper nozzles 1.2 mm for Hydroflame (5 pc)
Copper nozzles 1.5 mm for Hydroflame (5 pc)
(10 pcs) Set of perforated and numbered brass nozzles for HYDROFLAME 550 series (0.6 ÷ 1.5)
(5 pcs) Set of perforated and numbered brass nozzles for HYDROFLAME 250 (0.6 ÷ 1.0)
(5 pcs) Set of micro-nozzles (0.3 ÷ 1.0)
Special brush nozzle with 5 holes and adaptor
(4 pcs) Set of sintered STAINLESS STEEL filters 30x10
(10 pcs) Set of teflon gaskets for filter
(m) transparent PVC tube 8x12
27% KoH solution for HYDROFLAME / POWERFLAME (1 l)
ACCESSORIES for "POWERFLAME" series (end of life)
27% KoH solution for HYDROFLAME / POWERFLAME (1 l)
Spare needle for POWER FLAME Ø 0.80 cone 5/6 (10 pcs)
21
Copyright © 2013 FLEXA SRL. All rights reserved. Tutti i diritti riservati.
Automation for sign makers
Via dell'Industria, 11 - 31014 Colle Umberto (TV) ITALY
Tel. +39 0438 38565 - Fax +39 0438 38767 www.flexa.it
flexa@flexa.it
Main Catalog 2014.01
DIAMONDS for AMT, AM2, AMI series
(N.B. polishing machines AMT, AM2, AMI end of life)
625200010
625200020
625200030
625200040
625200050
625200060
-
Natural Diamond for Extra transparent finishing (BLUE) for AMT, AM2, AMI models
Synthetic Diamond for transparent Finishing (RED) for AMT, AM2, AMI models
Synthetic Diamond for matt finishing (GREEN) for AMT, AM2, AMI models
Synthetic Diamond for pre-cutting (BLACK) for AMT, AM2, AMI models
Synthetic Diamond for pre-cutting (WHITE) for AM2, AMI models
Synthetic Diamond for pre-cutting (YELLOW) for AM2, AMI models
Diamond Sharpening Service
POLISHING SYSTEMS FOR PLEXIGLASS
DIAMOND
Automatic Edge Polishing machine for Plexiglass
- Step-less tiltable milling unit in a range from -1° to 48° with digital read-out
(definition +/- 0,1°)
- Rigid front Stop bar
- Computer-based calculation of set values of the tilting angle and the milling
depth
- As standard, prepared to be equipped to use up to 4 cutting tools together
(depending on the job) - standard configuration includes 2 tools: pre-cutter
and finisher
- Strong pneumatic clamping cylinders with locking device
- User Friendly Touch display; comprehensive library with specific material
parameters depending on the work: milling data, tools type, diamonds needed,
etc.
- Tiltable milling unit
- Computer based calculation of the angle and of the milling head
- Flow dust extraction needed (not supplied)
- Extensive safety system: a plastic curtain at front and a protection door at rear
as well as further devices protect the operator
- Multi purpose table with anchorage points for lateral stop bars for rectangular
processing and for parallel stop bars
Large variety of different cutting tools for different materials and surfaces
- Transparent plastics such as PMMA GS, PMMA XT, PC, PETG, SAN, etc.
- Technical plastics such as PP, PE, PS, etc.
- Decorative plastics such as CORIAN®, AVONITE®, composite sheet, acrylic
gravestones, etc.
- Metals such as aluminium, brass, copper, etc.
-
Dimensions (W x D x H): 2400 x 1400 x 1810 mm - 3950 x 1400 x 1810 mm
Max. Material Thickness: 120 mm
Adjustable feeding speed: 0-5000 mm/min
Adjustable Rotation speed: 0-12000 rpm
REF.
030200020
030200010
DIAMOND 310 - Automatic Edge Polishing Machine for Plexiglass with diamond tools
DIAMOND 155 - Automatic Edge Polishing Machine for Plexiglass with diamond tools
22
Copyright © 2013 FLEXA SRL. All rights reserved. Tutti i diritti riservati.
Automation for sign makers
Via dell'Industria, 11 - 31014 Colle Umberto (TV) ITALY
Tel. +39 0438 38565 - Fax +39 0438 38767 www.flexa.it
flexa@flexa.it
Main Catalog 2014.01
ANTISTATIC EQUIPMENT
IONISING GUN AND POWER SUPPLY UNIT
ANTISTATIC IONISING AIR GUN for rapid cleaning and neutralisation of static charges.
Used together with a ionising supplier and a compressed air supplier: the flow of ionised
air is directed against the material in order to neutralise static charges.
-
Neutralises static charges on plastic sheets and films
Prevents annoying electrostatic shock and risk of fire
Easy cleaning and removal of waste
Compressed air supply required
Power supply 230 V 50 Hz 60 W
REF.
030600010
030600200
030600400
IONIZING AIR GUN + Antistatic Power Supply 5000 V two outlets - (two connectors)
Antistatic air gun
Antistatic power supply 5000V 2 outlets
ANTISTATIC BARS
IONISING ANTISTACTIC BAR removes static electricity from plastic sheets and films by
neutralising electrostatic charges with a flow of ionised air. Voltaic ion generator
required. Normally employed on the inlet of printing machines, screen-printing machines,
etc.
Working voltage 5 kV - Power supply 230 V 50/ 60 Hz
REF.
30600400
030600800
030600810
030600820
030600830
030600840
030600850
NO STATIC KIT
Antistatic
Antistatic
Antistatic
Antistatic
Antistatic
Antistatic
Antistatic
power supply 5000V 2 outlets
Bar 18" (46 cm)
Bar 24" (61 cm)
Bar 30" (76 cm)
Bar 36" (91 cm)
Bar 42" (107 cm)
Bar 48" (212 cm)
New
Antistatic fibre - high conductivity
-
It avoids static electricity on boards and films by contact
Prevents annoying electrostatic shock and risk of fire
It avoids screen-printing problems caused by electrostatic electricity
Skims the surfaces to be treated
FLEXA Elastic Fiber Kit (2 m elastic fiber + 2 magnets):
The between two holding magnets stretched elastic fiber must touch the surface of the material. This
perfect and easy-to-install solution is very practical for roll printers, laminators, roll winders, and all
systems which process roll materials.
Flexa Antistatic Fibres are made of anti-oxidant material and stainless steel.
REF.
030600600
030600610
650800040
610800060
STIFF ANTISTATIC FIBER (1 reel - 22 m)
ELASTIC ANTISTATIC FIBER (1 reel - 10 m)
MAGNET FOR ANTISTATIC FIBER
NO STATIC KIT (2 M OF ELASTIC FIBER + 2 MAGNETS)
23
Copyright © 2013 FLEXA SRL. All rights reserved. Tutti i diritti riservati.
Automation for sign makers
Via dell'Industria, 11 - 31014 Colle Umberto (TV) ITALY
Tel. +39 0438 38565 - Fax +39 0438 38767 www.flexa.it
flexa@flexa.it
Main Catalog 2014.01
VERTICAL PANEL SAWS
DOGMA 3.2
New
Dogma 3.2 is a compact vertical panel saw for vertical and horizontal cutting of various
panels and materials. Especially efficient and versatile in use, Dogma 3.2 is space-saving,
easy to handle and ensures absolute precise cuts of panels of up to 2,1 m height and
unlimited length.
Its peculiarity is reflected in high performance and the versatility of applications. With the
different available blades it is possible to cut with precision and comfortably several types
of materials such as PVC, methacrylate, polycarbonate, wood, aluminium, DIBOND®,
ALUCOBOND® and many others. DOGMA 3.2 comes with its own aspiration kit that
drastically reduces the emissions of dust when cutting materials.
Max. Vertical Cutting Width: 2,1 m
Max. cutting depth: 30 mm
Net Weight: 350 kg
Dimensions: 3050x1000x2800 mm
Electrical requirements: 230V/50Hz
Max power consumption: 1300 W
Blade diameter: 165 mm
Max. Speed: 4000 rpm
REF
035200020
035200010
DOGMA 3.2 working cut 3000 x 2100 with dust exhausting system included
DOGMA 3.2 working cut 3000 x 2100 with dust exhausting system NOT included
1 generic spare blade included
Options and accessories :
630650020
630650030
630650040
Top extensions
Side extensions
Generic spare blade
FLEXA CUT
Versatile and motorized panel saw. Cuts any type of rigid panel precisely and rapidly,
vertically and horizontally. Ideal for cutting foam PVC, Forex®, methacrylate,
polycarbonate, wood, Dibond®. Suitable for large production runs.
-
Suitable for panels in plastic, wood, aluminium, etc.
Max. cutting depth: 60 mm
Fold-away
Fold
away device for the cutting of small pieces
Incorporated waste removal system with rear collector bag
Low-noise self-braking motor 4 HP (3 Kw) - 5300 rpm
Frame entirely welded for maximum rigidity and cutting precision
Immagine indicativa con accessori
REF.
035100330
035100320
035100310
035100300
035100040
035100030
035100020
035100010
FLEXA
FLEXA
FLEXA
FLEXA
CUT
CUT
CUT
CUT
6000
5000
4000
3000
DELUXE
DELUXE
DELUXE
DELUXE
FLEXA
FLEXA
FLEXA
FLEXA
CUT
CUT
CUT
CUT
6000
5000
4000
3000
ECO
ECO
ECO
ECO
working
working
working
working
working
working
working
working
cut
cut
cut
cut
cut
cut
cut
cut
6080
5300
4200
3200
6080
5300
4200
3200
x
x
x
x
x
x
x
x
2200
2200
2200
2200
2200
2200
2200
2200
mm
mm
mm
mm
mm
mm
mm
mm
630200010
Digital vertical cutting measurement display
Digital horizontal cutting measurement display
Device for adjusting cutting depth
630200020
Device for angular cutting
630200030
Accessory to convert Flexa Cut from three-phase to single-phase - only when ordering
630300010
Blade
Blade
Blade
Blade
Blade
Blade
630100010
630100020
630300020
630300030
630300040
630300050
630300060
Ø
Ø
Ø
Ø
Ø
Ø
250
250
250
250
250
250
mm
mm
mm
mm
mm
mm
Z
Z
Z
Z
Z
Z
48AKE for methacrylates
60P universal
60N for aluminium
80P universal
80N for aluminium
100N aluminiuim and light panels
N.B.: the blade Z 80P #418550151 is supplied standard (included in price)
ACCESSORIES FOR SPLITTER
630300070
630300080
630300090
630300100
630800010
630800020
* Blade Z56 A (Ø 200 x 3.2 x 30) - [wood]
* Blade Z60 P (Ø 200 x 3 x 30)
- [various materials, including aluminium]
* Blade Z60 AKE (Ø 200 x 3.3/2.8 x 30) - [methacrylate]
* Blade Z64 PL (Ø 200 x 2.4 x 30) - [plastic]
Plastic support for panel (left)
Plastic support for panel (right)
24
Copyright © 2013 FLEXA SRL. All rights reserved. Tutti i diritti riservati.
Automation for sign makers
Via dell'Industria, 11 - 31014 Colle Umberto (TV) ITALY
Tel. +39 0438 38565 - Fax +39 0438 38767 www.flexa.it
flexa@flexa.it
Main Catalog 2014.01
KEENCUT PANEL CUTTERS
STEELTRAK
Designed to cut all the sheet materials used in the modern visual communication and
picture framing industries, STEELTRAK cuts vertically, providing the ultimate in space
saving convenience. The super-grip clamp holds even thick materials at any required
angle, and the clear rule along the cutting line allows easy alignment to artwork, lines or
registration marks. STEELTRAK is very easy to use. Wastage and errors will be reduced as
productivity increases, saving time and generating profit. The ingenious, indexed turret,
mounted on sliding head, simply turns to lock any one of three cutting tools in its selected
operating position, quickly, with no screws to loosen or tools to find.
-
Cutting length 1600 mm or 2100 mm - 2 different models
4 tool cutting heads ready mounted for instant tool selection
Full-length extra-grip clamping system
Ultra heavy duty steel composite twin wheel cutting head
Integral counterbalance, less fatigue, no accidents, easy loading
Ultra space saving, wall mounted as standard
Ideal for cutting: Aluminium composite panels (4 mm) as Dibond®, Aluminium panel (1,6 mm),
Scores glass up to 6mm (0.24”) thick, Foamboard up to 13mm (0.50”) thick, Rigid PVC
board up to 13 (0.50”) thick, Corrugated cardboard and corrugated plastics, Hardboard and
MDF up to 3mm (0.12”) thick, Scores acrylics.
REF.
040500300
STEELTRAK 210 - Working area L 2100 mm - only wall mounting
(2 cutting solutions: twin wheel cutter + 3 blades on revolver)
040500010
STEELTRAK 165 - Working area L 1650 mm
(2 cutting solutions: twin wheel cutter + 3 blades on revolver)
630400010
630400040
630400020
630400030
Vertical stand (for Steeltrak 210)
Vertical stand (for mod. 165)
Pack of 100 Medium Duty blades
Incision blade for methacrylate (spare)
630400620
630400630
630400060
630400070
630400080
Steeltrak 90° V-Groover 3mm
Steeltrak 90° V-Groover 4mm
Steeltrak 90° V-Groover spare blades (5 pcs)
SIMPLEX
Simplex offers exact accuracy for general purpose cutting of wide format materials up to
3.1 metres in width. The Simplex carries a straightness guarantee of 1.00mm or 1:3000
over the entire length and is an economical alternative to the Javelin when less extreme
accuracy is required. The lightweight portable Simplex is ideal for cutting PVC foamboard,
vinyl, woven fabrics, foam centred board, honeycomb and corrugated plastics, film, paper,
tissue and many more flexible and rigid materials. It uses utility knife blades and features
blade depth adjustment and a spring-loaded blade ejector as standard. The utility blades
will cut to a depth of 10mm (0.4”) and Keencut XR blades cut to a depth of 13mm (0.5”).
the patented linear bearings have been tested under load for 1600km (1000 miles) and
carry a 20 year guarantee. Full length silicon rubber grip strips ensure all work is clamped
when cutting and also protect the surface of the material being cut.
- Cutting lenght: 3100, 2600, 2100, 1600, 1100 mm
- Rear loading blade holder for swift replacement; blades will never pull out in
heavy materials
- 100 Medium Duty blades included.
Simplex is not suitable to Big Bench.
REF.
Not compatible with Big Bench and lifting handles.
040800050
040800040
040800030
040800020
040800010
SIMPLEX
SIMPLEX
SIMPLEX
SIMPLEX
SIMPLEX
3100
2600
2100
1600
1100
-
cutting
cutting
cutting
cutting
cutting
length
length
length
length
length
3100
2600
2100
1600
1100
mm
mm
mm
mm
mm
25
Copyright © 2013 FLEXA SRL. All rights reserved. Tutti i diritti riservati.
Automation for sign makers
Via dell'Industria, 11 - 31014 Colle Umberto (TV) ITALY
Tel. +39 0438 38565 - Fax +39 0438 38767 www.flexa.it
flexa@flexa.it
Main Catalog 2014.01
KEENCUT MANUAL CUTTER
DISTRIBUTION PRODUCT
EVOLUTION 2
Quick and precise cutting machine designed to fit any bench. Practical and convenient for
cutting and trimming light panels and prints. Max. thickness 13 mm. NEW: Equipped with
New Two Way Cutting Head, New Heavy-Duty Blades, Left and Right Flip Stops.
-
Working width 3600, 3100, 2600, 2100 o 1600 mm - different models
Cuts up to 13mm thickness
Single handed positioning, cutting and clamping
Full length lift & hold from either end for easy loading and positioning
1 blade holder for textile cutter + 2 two-way blade holders + 25 Graphik
blades INCLUDED
- Workable Materials: Foam centred board, PVC Foam board, Honeycomb and corrugated
plastics, Vinyl and plastic film, Cardboard, Corrugated cardboard, Sintrex®, Kapa®,
Laminil®, etc.
REF.
040700010
040700020
040700030
040700040
040700050
EVOLUTION
EVOLUTION
EVOLUTION
EVOLUTION
EVOLUTION
2
2
2
2
2
3600
3100
2600
2100
1600
-
cutting
cutting
cutting
cutting
cutting
length
length
length
length
length
3600
3100
2600
2100
1600
mm
mm
mm
mm
mm
(144'')
(124'’)
(104’’)
(84’’)
(64'')
2 Vertical Graphik Blade Holder + 25 Graphik blades + 1 Vertical Medium Duty Holder + 100 Medium
Duty blades + 1 Circular Blade Holder INCLUDED
630400230
630400310
630400640
630400020
Vertical Circular Blade Holder
45 mm Circular Blade (10 pcs)
Medium Duty Blade Holder
Medium Duty Blades (100 pcs)
630400300
Graphik Blade Holder
Keencut Graphik Blade (100 pcs)
630400290
Replacement strip for textile cutter (2 pack)
630400660
EVOBENCH 2
EVOBENCH is a strong, elegant, modular system designed to enable any business, large or
small, to specify and assemble the exact work, display or storage units needed to create a
perfect working environment. As business grows and develops any EVOBENCH structure
can be re-configured and expanded, quickly and economically to work in complete
harmony with the new demands. Designed with strength, simplicity and enduring good
looks as guiding principles EVOBENCH will enrich any facility and please the most
discerning owner. No extra tools are necessary, assembly is ultra-simple and the
applications are endless. Any EVOBENCH, table or custom unit can be fitted with a glass
top to enhance a workshop or create an elegant boardroom table. The possibilities are
endless.
- Adjustable feet allow the Evobench to stand on uneven floors without compromising
accuracy
- Unique leg to beam fixing brackets apply incredible strength to Evobench
- Create the ideal bench surface using a variety of worktop fixings (worktop not
included)
- The Evobench system allows for a wide variety of customisation options
- Work bench for EVOLUTION 2, cutting lenght 3600, 3100, 2600, 2100, 1600 mm.
- Worktop not included
- Dimensions 122 x 90 cm, 5 different lenghts according to the model
- Evolution 2 NOT INCLUDED
REF.
040700060
040700070
040700080
040700090
040700100
EVOBENCH
EVOBENCH
EVOBENCH
EVOBENCH
EVOBENCH
2
2
2
2
2
3600
3100
2600
2100
1600
(4000
(3500
(3000
(2500
(2000
x
x
x
x
x
1220
1220
1220
1220
1220
x
x
x
x
x
900
900
900
900
900
mm)
mm)
mm)
mm)
mm)
26
Copyright © 2013 FLEXA SRL. All rights reserved. Tutti i diritti riservati.
Automation for sign makers
Via dell'Industria, 11 - 31014 Colle Umberto (TV) ITALY
Tel. +39 0438 38565 - Fax +39 0438 38767 www.flexa.it
flexa@flexa.it
Main Catalog 2014.01
KEENCUT MANUAL CUTTER
DISTRIBUTION PRODUCT
JAVELIN INTEGRA
New
The Javelin-Integra features a mounted Javelin-Series 2 with integral Lift & Hold Levers
on an Aluminium Base Plate. Javelin-Integra can be attached to an existing work table or
a Keencut Bench to create a complete cutting station in your workshop. The Keencut
Javelin-Integra range of precision cutter bars is designed to exceed the most demanding
standards of accuracy. Javelin-Integra incorporates the unique design of the JavelinSeries 2 which allows Keencut technicians to factory adjust for straightness, using laser
technology, to within 0.2 mm over the 3.1 metre length of the cutter bar (1:15000) The
accuracy of the Javelin-Integra makes it ideal for cutting banner materials, pop-ups and
other display materials that require precise and accurate cutting for perfect alignment.
Keencut Javelin-Integra is supplied with all three of the Vertical Blade Holders allowing
cutting of a wide range of materials up to 13 mm in thickness. The patented linear
bearings have been tested under load for 1600 km (1000 miles) and carry a 20 year
guarantee. Full length silicon rubber grip strips on the cutter bar
and base plate ensure all work is clamped when cutting and also protect
the surface of the material being cut.
Workable Materials: PVC Foamboard, Vinyl, Woven Fabrics, Foam Centred Board,
Honeycomb & Corrugated Plastics, Film, Paper, Tissue and many more flexible
and rigid materials.
REF.
040750060
040750070
040750080
040750090
JAVELIN
JAVELIN
JAVELIN
JAVELIN
INTEGRA
INTEGRA
INTEGRA
INTEGRA
3100
2600
2100
1600
-
cutting
cutting
cutting
cutting
length
length
length
length
3100
2600
2100
1600
mm
mm
mm
mm
1 Vertical Graphik Blade Holder + 10 Graphik blades + 1 Vertical Medium Duty Holder + 100 Medium
Duty blades + 1 Circular Blade Holder INCLUDED
630400230
630400240
630400640
630400020
630400660
630400250
Vertical Circular Blade Holder
45 mm Circular Blade (10 pcs)
Medium Duty Blade Holder
Medium Duty Blades (100 pcs)
Graphik Blade Holder
Keencut Graphik Blade (100 pcs)
27
Copyright © 2013 FLEXA SRL. All rights reserved. Tutti i diritti riservati.
Automation for sign makers
Via dell'Industria, 11 - 31014 Colle Umberto (TV) ITALY
Tel. +39 0438 38565 - Fax +39 0438 38767 www.flexa.it
flexa@flexa.it
Main Catalog 2014.01
KEENCUT MANUAL CUTTERS
DISTRIBUTION PRODUCT
JAVELIN 2, MAX &
BIG BENCH
JAVELIN 2 and MAX, simple, safe and extremely precise cutters, and BIG BENCH working
tables: ideal for cutting and trimming light panels and prints. Max. thickness 10 mm.
-
Cutting length from 1000 to 5000 mm
Linear cutting, straight and precise (tolerance 0.2 mm/m) on the entire length.
A pair of standard lifting units on BigBench, or optional units for the bars
Javelin 2: Vertical Blade Holder + Graphik Blades (x 25) included
Ideal for cutting:
- Cardboard, corrugated card, plastic or vinyl film
- PVC foamboard up to 6 mm thick (Forex®)
- Flexible PVC for banners
- Light panels with foamed core up to 10 mm thickness
- Adhesive vinyl film and plastified prints
REF.
040850030
MAX 5000 - cutting length 5000 mm, 100 blades included
630400320
BIG BENCH - workbench for Max 5000
630400330
* Worktop 5150 x 900 x 18 mm for BIG BENCH 5000
040850020
MAX 4500 - cutting length 4500 mm, 100 blades included
630400340
BIG BENCH - workbench for Max 4500
630400350
* Worktop 4650 x 900 x 18 mm for BIG BENCH 4500
040850010
MAX 4000 - cutting length 4000 mm, 100 blades included
630400360
BIG BENCH - workbench for Max 4000
630400370
* Worktop 4150 x 900 x 18 mm for BIG BENCH 4000
040750050
JAVELIN 2 3100 - cutting length 3100 mm, 100 blades included
630400380
BIG BENCH - workbench for Javelin 2 3100
630400390
* Worktop 3250 x 900 x 18 mm for BIG BENCH 3100
040750040
JAVELIN 2 2600 - cutting length 2600 mm, 100 blades included
630400400
BIG BENCH - workbench for Javelin 2 2600
630400410
* Worktop 2750 x 900 x 18 mm for BIG BENCH 2600
040750030
JAVELIN 2 2100 - cutting length 2100 mm, 100 blades included
630400420
BIG BENCH - workbench for Javelin 2 2100
630400430
* Worktop 2250 x 900 x 18 mm for BIG BENCH 2100
040750020
JAVELIN 2 1600 - cutting length 1600 mm, 100 blades included
630400440
BIG BENCH - workbench for Javelin 2 1600
630400450
* Worktop 1750 x 900 x 18 mm for BIG BENCH 1600
040750010
630400460
630400470
JAVELIN 2 1100 - cutting length 1100 mm, 100 blades included
BIG BENCH - workbench for Javelin 2 1100
* Worktop 1250 x 900 x 18 mm for BIG BENCH 1100
1 Vertical Graphik Blade Holder + 10 Graphik blades + 1 Vertical Medium Duty Holder + 100 Medium
Duty blades + 1 Circular Blade Holder INCLUDED
920201461
920202021
920202031
920202041
630400480
630400490
630400500
630400510
Pair of lifting units for Javelin 2 and Max (table mounted)
Yellow silicone cord, "T" section (10m - 32')
Yellow silicone cord, round section (10m - 32')
White silicone cord, round section (10m - 32')
Pair of lifting units for Javelin 2 and Max (table mounted)
Yellow silicone cord, "T" section (10m - 32')
Yellow silicone cord, round section (10m - 32')
White silicone cord, round section (10m - 32')
Spare parts & accessories for Max
630400520
630400020
630400120
Superior Quality Blades (100 pc)
Pack of 100 Medium Duty blades
Incision blades for methacrylate (5 pc pack)
Spare parts & accessories for Javelin 2
630400230
Vertical Circular Blade Holder
630400560
45 mm Circular Blade (10 pcs)
630400640
Medium Duty Blade Holder
Medium Duty Blades (100 pcs)
Graphik Blade Holder
Keencut Graphik Blade (100 pcs)
630400020
630400660
630400570
Spare parts and accessories:
630400580
630400590
630400600
630400610
Pack of 100 Extra deep blades (cutting up to 13mm)
Fabric cutter (one blade included)
Replacement blades for fabric cutter (10 pc pack)
Whole cutting head (spare part) for Javelin
28
Copyright © 2013 FLEXA SRL. All rights reserved. Tutti i diritti riservati.
Automation for sign makers
Via dell'Industria, 11 - 31014 Colle Umberto (TV) ITALY
Tel. +39 0438 38565 - Fax +39 0438 38767 www.flexa.it
flexa@flexa.it
Main Catalog 2014.01
ULTRASONIC CUTTING SYSTEM
SONICUT 400
Safe, easy-to-use, fast, reliable and precise: the cutting system Sonicut 400 enables you
to simultaneously cut and seal in a straight way with the proper guiding bars and to move
freely for hand-probe cutting (curves and different shapes) on fabrics and nonwoven
fabrics. It allows excellent performances, low maintenance and no more fraying since the
fabric is sealed while cutting. Other than the heating cutting system it's odor-free, it
doesn't require special maintenance and it doesn't damage the material. Sonicut 400 is a
cold cutting system, cuts and seals the edges at the same time for no-fraying edges
results. Our Ultrasonic system is designed for easy operator use. Simply plug in the power
cable and the unit is ready to work. No need to tune the unit, set it or select power levels.
Everything is adjusted automatically. No warm up time, no cool down is needed: the unit
is always ready for use. All our tools require no special cleaning. High quality components,
worldwide suppliers and carefully assembled systems make our Sonicut 400 very reliable
and long lasting.
-
System for straight cutting and free hand-probe cutting (curves and different shapes)
Cuts and seals fabric edges in a professional way leaving edges clean and smooth
No more fraying
Low Energy consumption, the cutting head remains cold
No fabric burning or marks, no toxic smoke
No warm up time. All our tools require no special cleaning
Cutting operations must be performed on a solid surface (steel or lead glass)
-
Generator dimensions: 180 x 350 x 240 mm
Power consumption: 400 Watt
Power frequency: 40 Khz
Operating voltage 230V, 240V, 110V (automatically selected)
REF.
670300010
Generator + sonotrode to weld in form of dots
Parts to be used with the generator
670300020
Manual Cutting System with guide and with rounded cutting blade sonotrode included
670300030
Cutting gun with 10 mm Ø flat cutting blade sonotrode included
670300040
Manual System with 10 mm Ø flat cutting blade sonotrode included
Spare parts and accessories:
670300050
Sonotrode with rounded cutting blade
670300060
Sonotrode with flat cutting blade 10 mm diameter
670300070
Sonotrode to weld PVC in form of dots
29
Copyright © 2013 FLEXA SRL. All rights reserved. Tutti i diritti riservati.
Automation for sign makers
Via dell'Industria, 11 - 31014 Colle Umberto (TV) ITALY
Tel. +39 0438 38565 - Fax +39 0438 38767 www.flexa.it
flexa@flexa.it
Main Catalog 2014.01
AUTOMATIC ROTATING TRIMMERS
MIURA II
New
Fully automatic, electrical rotating XY trimmer for printed images and a wide range of
flexible materials: Reflective films, adhesive vinysl, Duratrans, photo paper, vinyl,
laminated and encapsulated medias, PVC,iInkjet and electrostatic plotter medias, graphic
art films, banner. Very easy to use, cuts rapidly and precisely.
-
Max. cutting thickness 1.2 mm
Working width 1600 or 2650 mm (2 differnt machines)
Fully protected self-sharping rotating blades
Automatic locking bar for cutting
Simultaneous X and Y cutting solutions
Three longitudinal cutting units to be positioned as required
Front unwinding shaft for images on roll (max Ø 300 mm)
Electronic control and programming panel for three different settings:
- Manual: All positioning and cutting operations are manually and easily performed
thanks to the graphics on the touch-screen panel;
- Semi-automatic: After the entry of the cutting/trimming values and the number
of pieces required, all operations are performed automatically.
- Automatic: An optical sensor recognizes and memorizes the print’s start and end
positioning values; the touch-screen is used to enter the settings for transversal
cutting. This operating mode allows the cutting of prints of different sizes contained
on the same roll as long as the longitudinal alignment is respected.
- Power supply 230 V 50 Hz - max. 650 W
- Dimensions : 2500 x 1000 x 1300 mm; weight 280 kg.
REF.
119210011
119210031
630500010
MIURA II 160
MIURA II 265
Lengthwise cutter for MIURA II
630500120
630500020
630500080
630500030
630500040
630500050
Spare blade for Miura II
s lengthwise cutter
cutter, ball bearing included
II's
Twin blades modification for Miura II Lengthwise cutter
Rubber coated roller for lengthwise cutter for MIURA II
Fine position regulator for lengthwise cutter for MIURA II
Adjustable Unwinding shaft
630500110
630500060
630500070
Collecting table for Miura II 160
X-Y POWERFLOW
Collecting table for Miura II 265
FLEXA XY POWERFLOW is the latest solution for the finishing of large format
prints. This system provides a workflow even for industrial applications when
images need trimming directly from coils of small and large format. It allows to
make very precise and fast trimming operations on flexible media starting from
rolls of up to 500 mm in diameter
The system consists of:
1 ) A POWERFLOW Unwinding DEVICE
2 ) An XY CUTTER MIURA 2
3 ) A POWERFLOW STACKER
In the XY PowerFlow System, the Miura system is equipped with optical reading
devices for both vertical and horizontal cutting lines, in order to perfectly cut
squared images, although the coil may not be perfecly rewound.The system has
its own POWERFLOW Stacker, a gathering table receiving the cut out prints.
70500010
XY POWERFLOW (Unwinding Device UD170 + Miura II 160 + Stacker st 170)
30
Copyright © 2013 FLEXA SRL. All rights reserved. Tutti i diritti riservati.
Automation for sign makers
Via dell'Industria, 11 - 31014 Colle Umberto (TV) ITALY
Tel. +39 0438 38565 - Fax +39 0438 38767 www.flexa.it
flexa@flexa.it
Main Catalog 2014.01
AUTOMATIC ROTATING TRIMMER
EXTRIM
New
Extrim is an electrical trimming machine suitable to cut flexible materials up to 1.8 mm
thickness with great precision and ease of use. Equipped with a self sharpening circular
blade, Extrim (according to the model) allows you to cut material from 2600 up to 3600
mm width, even if wound up in rolls – thanks to the front roll shaft (optional). The blade
is mounted on a sturdy carriage placed on a linear recirculating ball guide-way to ensure
maximum precision and long-lasting performances. The automatic lowering pressure bar
holds the material in place during the cutting function. The machine is standard equipped
with a potentiometer that allows you to adjust the cutting speed from 0 to 100 m/min. A
useful constant LED illuminating system helps you to work without any difficulty. Thanks
to the protection cover of all its moving parts Extrim is a very safe machine. The waste
catcher helps you to keep your working area always clean and neat. The frame is mounted
on wheels so the machine can be easily moved along the working area. Extrim is an ideal
synthesis of ergonomic, ease of use,
precision and speed, designed to improve your productivity. Extrim pays for
itself in a very short time making your work faster and more accurate.
With Extrim you can cut:
- Paper and Cardboard, Polyester film, PVC banners, various fabrics and canvases,
digital printing supports – even if already laminated and mounted with double-sided
adhesive, laminated prints, Polycarbonate film, reflective sheets for road-signs,
Lithographic films, different plastic material
- Steel frame mounted on wheels to ensure an ease of movement
- Standard Electronic adjustment for speed control from 0 to 100 m/min.
- Working width (2 different models): 2600 mm - 3600 mm
- Max. cutting thickness: 1.8 mm
- Max. Cutting Speed: 100 m/min
- Working Height: 920 mm
- Dimensions (W x D x H): mod. 2600: 3295 x 540 x 1100 mm; mod. 3600:
4295 x 540 x 1100 mm. Net Weight: mod. 260: 98 kg; mod. 360: 113 kg
- Power Supply: 1 Ph - 300 W - 230 V - 50/60 Hz
REF.
040200200
040200010
040200300
EXTRIM ELETTRICA 160-cutting width 1600mm
ELECTRIC EXTRIM 260 - cutting width 2600 mm
ELECTRIC EXTRIM 360 - cutting width 3600 mm
630550050
630550010
630550040
630550020
630550030
070500020
07500030
Front Shaft Extrim 260
Front Shaft Extrim 360
Font tray for prints Extrim 160
Font tray for prints Extrim 260/360
Easy Flow system (Easy Lite + Easy Flow connector+ Extrim 160)
UNIFLOW SYSTEM (EASY FLOW CONNECTOR + EXTRIM160- SUITABLE FOR ALL LAMINATORS)
Different sizes available on request
SLITTER
SLITTER SLT 800
Slitter SLT 800 - unit for slitting self-adhesive foils.
-
Working width 800 mm.
Cutting units with micrometrical regulation of cutting depth.
Electronically adjustable speed from 0 to 15 m/min.
Supplied with 4 cutting units and working bench on wheels
Back tray collector of cut material with adjustable stop
Other dimensions available upon request
REF.
040300010
630600010
SLITTER SLT 800
Supplementary cutting unit
31
Copyright © 2013 FLEXA SRL. All rights reserved. Tutti i diritti riservati.
Automation for sign makers
Via dell'Industria, 11 - 31014 Colle Umberto (TV) ITALY
Tel. +39 0438 38565 - Fax +39 0438 38767 www.flexa.it
flexa@flexa.it
Main Catalog 2014.01
FLEXADOME
New
Flexadome is a brand new system to apply resin giving a 3D effect to PVC and polyester labels and
many
other materials.
FLEXADOME, practical, fast and environmentally friendly, for the realization of three-dimensional
tags and labels.
The primary advantages of this new system can be summarized as follows:
Extreme convenience in the start-up and shutdown of the system
No mixing of components and this eliminates the possible formation of bubbles in the resin
No presence of harmful components, such as isocyanates, toxic by inhalation or skin contact
Improved moisture resistance, compared to polyurethane resins, without formation of bubbles
No waste of resin, nozzles and scraps of plastic cartridges
- Reduced gel time, about 10/12 minutes
- Extremely simple to use and productive especially if combined with digital time
Three configurations available:
FLEXADOME Advanced System (professional results with high production rates)
FLEXADOME Smart System (professional results but for a non-intensive use)
FLEXADOME Demo Kit (ideal for test evaluation of the system)
REF.
065120010
FLEXADOME Advanced - UV oven w/2 plates + computerized dispenser
065120020
670400030
FLEXADOME Smart - UV oven w/2 plates + manual dispenser
Upgrade from Smart to Advanced system
FLEXADOME Demo Kit - mini UV oven + 1/2 kilo of UV resin + matt black syringe + pair of gloves
065120030
670400010
UV Single-component Resin (1 Kg)
Spare parts:
670400040
Nozzles kit size "S" 1,20 mm 5pz (plastic)
670400050
Nozzles kit size "M" 1,60 mm 5pz (plastic)
670400060
Nozzles kit size "L" 1,60 mm 5pz + 1 protection cap (steel-plastic)
670400070
Complete siringe 30cc (UV-Block) + 1 cap
32
Copyright © 2013 FLEXA SRL. All rights reserved. Tutti i diritti riservati.
Automation for sign makers
Via dell'Industria, 11 - 31014 Colle Umberto (TV) ITALY
Tel. +39 0438 38565 - Fax +39 0438 38767 www.flexa.it
flexa@flexa.it
Main Catalog 2014.01
DRYERS FOR PRINTED IMAGES
GHIBLI/GHIBLI
PLUS
Dryer for printed images, GHIBLI produces one "blade" of warm air, with temperature
and volume electronically adjustable - ideal to accelerate the drying process of images
produced with a ink-jet printers. It allows to immediately use the images and reduces the
risks of damage. The structure is mounted on castors. Silent and very simple to use.
-
Maximum working width 1600 or 2500 mm - two different models
Adjustable working height
Max power 3500 W
Power supply 230V - 50Hz
- Dimensions 2100 x 500 mm h 1100
- Net weight 40 Kg
GHIBLI Plus is equipped with a steel support stand mounted on wheels with passing
shafts and motorized rewinding shafts (optional). Available in standard version (1600 mm
working width) or supplied with features on demand.
REF.
060100010
060102000
670200020
060100300
060102300
670200010
GHIBLI 160 mounted on aluminium stand with castors (L=1600mm)
GHIBLI 160 Plus: steel stand + castors + counter shafts
Powered rewinder (1600) for GHIBLI Plus
GHIBLI 250 mounted on aluminium stand with castors (L=2500mm)
GHIBLI 250 Plus : steel stand + castors + counter shafts
Powered rewinder (2500) for GHIBLI 250 Plus
IMPULSE WELDING MACHINES for PVC BANNERS
APOLLO 580
APOLLO 580 is a completely automatic folding impulse welding machine that makes hems
and pockets in PVC and fabrics - thanks to a compressed air system, and performs
simultaneous welding in just one step using the impulse technology. High productivity,
rapid cycle times, low power consumption and extremely easy to use. It guarantees
excellent results on any type of banner.
-
Max.
Max working height 580 cm.
cm Hemming depth from 27 to 60 mm.
mm
Sealing width: 20 mm - Cycle time: approx. 30/35 secs.
Height of working bench 100 cm +/- 3cm - Pressure 6 BAR
Dimensions: 670 x 120 x 180 cm (LxWxH)
Power Supply: 400 V 3 Ph 50/60 Hz 35 Amp
REF.
045100050
APOLLO 580
APOLLO 430
APOLLO 430 is a completely automatic folding impulse welding machine that makes hems
and pockets in PVC and fabrics - thanks to a compressed air system, and performs
simultaneous welding in just one step using the impulse technology. High productivity,
rapid cycle times, low power consumption and extremely easy to use. It guarantees
excellent results on any type of banner.
-
Max. working height 430 cm. Hemming depth from 27 to 60 mm.
Sealing width: 20 mm - Cycle time: approx. 25 secs.
Height of working bench 100 cm +/- 3cm - Pressure 6 BAR
Dimensions: 510 x 100 x 140 cm (LxWxH)
Power Supply: 400 V 3 Ph 50/60 Hz 35 Amp
REF.
045100040
APOLLO 430
33
Copyright © 2013 FLEXA SRL. All rights reserved. Tutti i diritti riservati.
Automation for sign makers
Via dell'Industria, 11 - 31014 Colle Umberto (TV) ITALY
Tel. +39 0438 38565 - Fax +39 0438 38767 www.flexa.it
flexa@flexa.it
Main Catalog 2014.01
APOLLO 350
APOLLO 350 is a completely automatic folding impulse welding machine that makes hems
and pockets in PVC and fabrics - thanks to a compressed air system, and performs
simultaneous welding in just one step using the impulse technology. High productivity,
rapid cycle times, low power consumption and extremely easy to use. It guarantees
excellent results on any type of banner.
-
Max. working height 340 cm. Hemming depth from 27 to 60 mm.
Seal width: 14 mm - Cycle time: approx. 25 secs.
Height of working bench 100 cm +/- 3cm - Pressure 6 BAR
Dimensions: 420 x 100 x 140 cm (LxWxH)
Power Supply : 400 V 3 Ph 50/60 Hz 35 Amp
REF.
045100030
APOLLO 350
APOLLO 300
Impulse welding machine for PVC banners, can be used to weld PVC banners and hem
pockets. High productivity, rapid cycle times, low power consumption, extremely easy to
use. It guarantees excellent results on any type of banner.
-
Bar height 300 cm.
Seal width: 14 mm - Cycle time: approx. 25 secs.
Height of working bench 100 cm +/- 3cm - Pressure 6 BAR
Dimensions: 380 x 100 x 140 cm (LxWxH)
Power Supply : 400 V 3 Ph 50/60 Hz 35 Amp
REF.
45100020
APOLLO 300
IMPULSE WELDING MACHINES for PVC BANNERS
APOLLO 155
Impulse technology welding machine for PVC fabrics, can precisely join two parts one
over the other, create hem pockets and side reinforcements. With the special FLEXA Hot
Melt Tape even different materials i.e. cotton, polyester and many more can be welded.
Independent controls of temperature, heating and cooling times integrated in the touch
screen panel that contains up to 39 personal settings memory. For specific jobs and
requirements it is possible to heat only one bar (the top or the lower one) as needed.
Uniform welding and excellent performances even after many sequential cycles.
-
Working width 1500 mm
Welding width 20 mm
Adjustable stop
Side extension of working bench (2 m on both sides)
Heat-sealing elements covered with protective Teflon film
Connection must be made to an external compressed air supplier or compressor
(not supplied): max 6 Bar, hose Ø 8 mm
- Working height: 980 mm
- Power supply 400 V 3p - 50/60 Hz - max 16 A
- Also available in single-phase 230 V
REF.
45100010
APOLLO 155
Options :
65750010
Silent Compressor 230V/50Hz (45db)
The thermoadhesive tape allors to bond fabrics made from various PVC-free materials,
such as FELT, COTTON, “FLAG” (polyester), etc.
REF.
635100030
635100050
FLEXA special thermoadhesive tape width 10 mm (50 m / roll)
FLEXA special thermoadhesive tape width 20 mm (100 m / roll)
Spare parts (ROUTINE MANTENENCE) :
635100010
Protective teflon tape for upper and lower heating bar (all models, 10 m roll)
635100020
Protective teflon tape ANTIGLOSS for upper and lower heating bar (all models, 10 m roll)
34
Copyright © 2013 FLEXA SRL. All rights reserved. Tutti i diritti riservati.
Automation for sign makers
Via dell'Industria, 11 - 31014 Colle Umberto (TV) ITALY
Tel. +39 0438 38565 - Fax +39 0438 38767 www.flexa.it
flexa@flexa.it
Main Catalog 2014.01
BANNER WELDING MACHINE
ZIP
Automatic hot-air welding machine for PVC.
Welds two banners together (even after printing) one over the other.
-
Power supply 230 V - 50 Hz - 2300 W
Digital temperature adjustment from 20 to 620 °C
Digital air-flow adjustment up to 300 l/min
Digital speed adjustment: from 1 to 7.5 m/min
N.B.: for greater linear precision, thanks to the exclusive hook-up system, ZIP should be combined with the
Javelin & Max cutting bars and BigBench or with the simple Guide Bar Kit
REF.
045500310
045500300
635200010
ZIP 20 (overlap 20 mm)
ZIP 30 (overlap 30 mm)
ZIP UpGrade Kit to 30 mm (for ZIP 20 mm)
GUIDE BAR KIT
Linear guide system for ZIP made of three heavy bars connected together thanks to a
jointing system and equipped with a plastic sliding unit. It considerably improves linearity.
REF.
635200020
635200030
Guide Bar Kit 6 m (3 x 2 m) for ZIP
Additional guide bar 2 m
PHON
Manual hot air welding equipment for high quality results. Can be used to mend billboards
or to create reinforcements for tension eyelets.
-
Power supply 230 V - 50/60Hz - max. 1600 W
Temperature adjustable from 50° C to 700° C
Quantity of air: 230 l/min max.
Dimensions: 340 x 90 mm - handle diam 56 mm
Weight
W i ht 1.4
1 4 kg
k with
ith 3 m off cable
bl
REF.
060200010
635300010
635300020
PHON
Air lance with enlarged slot 40 mm
Air lance with enlarged slot 20 mm
35
Copyright © 2013 FLEXA SRL. All rights reserved. Tutti i diritti riservati.
Automation for sign makers
Via dell'Industria, 11 - 31014 Colle Umberto (TV) ITALY
Tel. +39 0438 38565 - Fax +39 0438 38767 www.flexa.it
flexa@flexa.it
Main Catalog 2014.01
EYELET MACHINES (for plastic eyelets)
GHOST 200
Manually operated punching press with self-perforating punch to make holes in PVC,
fabrics and other materials. Time cut in half thanks to the simultaneous hole punching
and eyelet riveting in just one operation. Particularly suited to sun awnings, coverings,
advertising banners in PVC, and digital printing on fabrics.
- Manual lever operation
- Diameter of the eyelet to be applied: 8, 12, 16 mm by changing the moulds
- Up to 3 mm thickness on expanded PVC with 12 mm. diameter eyelets
- Dimensions 210 x 70 x 630 mm (D, L, H)
- Weight 4.5 kg.
REF.
050100010
MANUAL LEVER PUNCHING PRESS - MOD. GHOST 200 Ø 12
including punch - die and 250 eyelets ø12 mm
Accessories :
640100010
640100020
640100030
Punch - Die for 200, 600, 700 Ø 8mm
Punch - Die for 200, 600, 700 Ø 12mm
Punch - Die for 200, 600, 700 Ø 16mm
GHOST 250
Manually operated and portable punching press with self-perforating punch to make holes
in PVC, fabrics and other materials. GHOST 250 doesn't need to be fixed to a working
bench. You can carry it with you in any work environment. A very practical machine that
enables the operator to easily move around the working material. Time cut in half thanks
to the simultaneous hole punching and eyelet riveting in just one operation. Particularly
suited to sun awnings, coverings, advertising banners in PVC, and digital printing on
fabrics.
- Manual lever operation
- Diameter of the eyelet to be applied: 8, 12, 16 mm by changing the moulds
- Up to 3 mm thickness on expanded PVC with 12 mm. diameter eyelets
- Dimensions 250 x 60 x 450 mm (D, L, H)
- Weight 4,6 kg.
REF.
050100020
MANUAL LEVER PUNCHING PRESS - MOD. GHOST 250 Ø 12
including punch - die and 250 eyelets ø12 mm
Accessories:
640100010
640100020
640100030
Punch - Die for 200, 600, 700 Ø 8mm
Punch - Die for 200, 600, 700 Ø 12mm
Punch - Die for 200, 600, 700 Ø 16mm
36
Copyright © 2013 FLEXA SRL. All rights reserved. Tutti i diritti riservati.
Automation for sign makers
Via dell'Industria, 11 - 31014 Colle Umberto (TV) ITALY
Tel. +39 0438 38565 - Fax +39 0438 38767 www.flexa.it
flexa@flexa.it
Main Catalog 2014.01
PNEUMATIC SELF-PERFORATING PUNCHING
PRESS - for plastic eyelets
DISTRIBUTION PRODUCT
GHOST 600
Very versatile manual and pneumatic self-perforating punching machine. GHOST 600
punches a hole in the material and applies the eyelet in just one operation for remarkable
savings of time.
-
Pneumatic system with manual operation
Diameter of eyelet to be applied: 8 mm, 12 mm, 16 mm by changing the moulds
Throat depth 90 mm
Up to 3 mm thickness on expanded PVC with 12 mm. diameter eyelets
- The machine must be connected to an external compressor (not included) to supply min. 6 bar
- Dimensions: 140 x 230 x 362 mm (D, L, H)
- Weight: 9 kg
REF.
050200010
PNEUMATIC SELF-PERFORATING PUNCHING PRESS - GHOST 600 Ø 12
including punch - die ø12mm
Accessories :
Punch - Die for 200, 600, 700 Ø 8mm
Punch - Die for 200, 600, 700 Ø 12mm
Punch - Die for 200, 600, 700 Ø 16mm
640100010
640100020
640100030
GHOST 700
Very versatile pneumatic self-perforating punching machine. GHOST 700 punches a hole
in the material and applies the eyelet in just one operation for remarkable savings of
time. The foot pedal enables the operator to keep both hands free.
-
Pneumatic function with pedal operation
Diameters of eyelet to be applied: 8, 12, 16 mm by changing the moulds
Throat depth 130 mm
Up to 3 mm thickness on expanded PVC with 12 mm. diameter eyelets; up to 5 mm
with 16 mm diameter
- The machine must be connected to an external compressor (not included) to supply min. 6 bar
- Dimensions: 140 x 230 X 362 mm (D, L, H)
- Weight: 9.3 kg
REF.
050200020
PNEUMATIC SELF-PERFORATING PUNCHING PRESS - GHOST 700 Ø 12
including punch - die ø12mm
Accessories :
Punch - Die for 200, 600, 700 Ø 8mm
Punch - Die for 200, 600, 700 Ø 12mm
Punch - Die for 200, 600, 700 Ø 16mm
640100010
640100020
640100030
65750010
Options:
Silent Compressor 230V/50Hz (45db)
PNEUMATIC SELF-PERFORATING PUNCHING
PRESS - for plastic grommets
GHOST EVO
New
GHOST EVO in a single operation punches a hole in the material, position and set the
eyelet. The foot pedal and the automatic loading of eyelets by force of gravity enable the
operator to keep both hands free for remarkable savings in time. Castor mounted and
laser pointer equipped.
-
Electric and pneumatic operation with foot pedal
Automatic loading of eyelets by force of gravity
Diameter of the eyelet to be applied: 12 mm
Suitable on a wide range of materials (such as PVC, fabrics, banners, canvas,
carton, etc.)
- Standard supplied with working bench on wheels
- Throat depth 50 mm (rigid material) - 80 mm (flexible material)
- Laser Pointer
- Dimensions 680 x 400 x 740 (h) mm
- Weight 58 Kg
- The system must be connected to an external compressor to supply min. 6 bar; every cycle of
work requires 7.6 l. of air
- Power supply single-phase 220 V - 50 Hz - 100 W
REF.
050300030
640100200
065750010
AUTOMATIC PUNCHING PRESS WITH LOADER - GHOST EVO Ø 12
punch - die ø12mm included. Foot pedal included.
Punch - Die for GHOST EVO Ø 12mm
Silent Compressor 230V/50Hz (60 db)
37
Copyright © 2013 FLEXA SRL. All rights reserved. Tutti i diritti riservati.
Automation for sign makers
Via dell'Industria, 11 - 31014 Colle Umberto (TV) ITALY
Tel. +39 0438 38565 - Fax +39 0438 38767 www.flexa.it
flexa@flexa.it
Main Catalog 2014.01
EYELETS
OCCHIELLI IN PLASTI PLASTIC EYELETS
640200010
640200020
640200030
640200040
640200050
640200060
640200070
640200080
640200090
640200100
640200110
Clear eyelet Ø 8 mm (1000 units)
White eyelet Ø 8 mm (1000 units) on request
Black eyelet Ø 8 mm (1000 units) on request
Eyelet + Clear washer Ø 12 mm (1000 + 1000 units)
Eyelet + White washer Ø 12 mm (1000 + 1000 units) on request
Eyelet + Black washer Ø 12 mm (1000 + 1000 units) on request
Eyelet + Clear washer Ø 16 mm (1000 + 1000 units)
Clear eyelet Ø 16 mm (1000 units)
Eyelet + Clear washer Ø 25 mm (1000 + 1000 units)
Eyelet + White washer Ø 25 mm (1000 + 1000 units) on request
Eyelet + Black washer Ø 25 mm (1000 + 1000 units) on request
640200140
Eyelet + Clear washer Ø 40 mm (1000 + 1000 units)
Eyelet + White washer Ø 40 mm (1000 + 1000 units) on request
Eyelet + Black washer Ø 40 mm (1000 + 1000 units) on request
640200150
Clear eyelet PMS OVAL 30 x 10 mm (1000 units)
640300010
Eyelet
Eyelet
Eyelet
Eyelet
Eyelet
VL
VL
VL
VL
VL
40
50
60
70
80
aluminium
aluminium
aluminium
aluminium
aluminium
Eyelet
Eyelet
Eyelet
Eyelet
Eyelet
VL
VL
VL
VL
VL
40
50
60
70
80
nickel
nickel
nickel
nickel
nickel
640200120
640200130
METAL EYELETS
640300020
640300030
640300040
640300050
640300060
640300070
640300080
640300090
640300100
ø
ø
ø
ø
ø
brass
brass
brass
brass
brass
10
12
14
16
18
ø
ø
ø
ø
ø
mm
mm
mm
mm
mm
10
12
14
16
18
(1000pcs)
(1000pcs)
(1000pcs)
(1000pcs)
(1000pcs)
mm
mm
mm
mm
mm
(1000pcs)
(1000pcs)
(1000pcs)
(1000pcs)
(1000pcs)
SPARES & FITTINGS
645100040
[400
[400
[200
[200
645200010
[250 pcs] Basket hook Ø 8mm
645200020
[100 pcs] Hook for elastic cord Ø 6 mm black
[100 pcs] Hook for elastic cord Ø 8 mm black
645100010
645100020
645100030
645200030
645300010
645300020
645300030
645300040
m]
m]
m]
m]
Packet
Packet
Packet
Packet
of
of
of
of
Elastic
Elastic
Elastic
Elastic
9
9
9
9
kg
kg
kg
kg
cord
cord
cord
cord
ca
ca
ca
ca
of
of
of
of
Ø
Ø
Ø
Ø
6mm
6mm
8mm
8mm
Polyester
Polyester
Polyester
Polyester
-
white [per m]
black [per m]
white [per m]
black [per m]
plait,
plait,
plait,
plait,
Ø
Ø
Ø
Ø
4
5
6
8
mm,
mm,
mm,
mm,
white
white
white
white
[per
[per
[per
[per
Kg]
Kg]
Kg]
Kg]
white / black
645400010/20
645400030/40
645400050/60
[100 pcs] Bungee cord with basket hook Ø 6 mm / L 20 cm
[100 pcs] Bungee cord with basket hook Ø 6 mm / L 25 cm
[100 pcs] Bungee cord with basket hook Ø 6 mm / L 30 cm
white / black
645400070/80
645400090/100
645400110/120
645400130/140
645400150/160
645400170/180
[100
[100
[100
[100
[100
[100
pcs]
pcs]
pcs]
pcs]
pcs]
pcs]
Bungee
Bungee
Bungee
Bungee
Bungee
Bungee
cord
cord
cord
cord
cord
cord
with
with
with
with
with
with
steel
steel
steel
steel
steel
steel
hook
hook
hook
hook
hook
hook
Ø
Ø
Ø
Ø
Ø
Ø
6
6
6
8
8
8
mm
mm
mm
mm
mm
mm
38
/
/
/
/
/
/
L
L
L
L
L
L
20
25
30
20
25
30
cm
cm
cm
cm
cm
cm
Copyright © 2013 FLEXA SRL. All rights reserved. Tutti i diritti riservati.
Automation for sign makers
Via dell'Industria, 11 - 31014 Colle Umberto (TV) ITALY
Tel. +39 0438 38565 - Fax +39 0438 38767 www.flexa.it
flexa@flexa.it
Main Catalog 2014.01
645400210
[100 pcs] Rubber Tension rod, 20 cm, black
[100 pcs] Rubber Tension rod, 25 cm, black
[100 pcs] Rubber Tension rod, 40 cm, black
645200040
[500 pcs] Open "S" hook (galvanised iron)
645400190
645400200
MAT&Co Accessories
SPEEDY ROLL &
SPEEDY TAPE
UNWINDING UNIT
SPEEDY ROLL 1500 UNWINDER
Support for unwinding any type of rolled material with a maximum width of 1500 mm and weight of
up to 100 Kg.
Equipped with a precise metrage counter to measure unrolled material.
The PVC rollers never damage the material, even if it is delicate.
REF.
065800010
650100010
SPEEDY ROLL 1500
Lifting brackets for fixing it to the work table
SPEEDY TAPE 1500 and SPEEDY TAPE 750 UNWINDERS
Two different models (1500 mm and 750 mm) for holding and unwinding any type of roll.
The equipment is completed with the support brackets to secure the equipment in a high position on
the edge of the table, providing precious help when placing the application tape.
The sturdy base and rubber feet prevent the apparatus from moving.
The PVC rollers never damage the material, even if it is delicate.
SPEEDY TAPE 1500: L 1500 mm - max. weight 100 kg.
SPEEDY TAPE 750: L 750 mm - max. weight 40 kg.
REF.
REF
065800020
065800030
650100010
PRT
SPEEDY TAPE 1500
SPEEDY TAPE 750
2 special brackets for elevated position on the work table
ROLL HOLDERS
PRT 48R and PRT 90R are two strong and handy holder units for stoking material in rolls.
To avoid wasting time searching for material, they keep the rolls in an ideal storage
position.
- Powder-painted tubular steel structure.
- Model PRT 90R (90 places) for 30 rolls with heights of up to 1500 mm, and for
60 rolls with heights of up to 750 mm
- Model PRT 48R (48 places) for rolls with heights of up to 750 mm
REF.
065850030
065850010
065850020
ROLLSTAR
PRT 90R - 90 positions on castors - Holder width 720 mm on two sides
PRT 45R - 45 positions on castors - Holder width 720 mm on one side
PRT 48R - 48 positions on castors - Holder width 400 mm on two sides
New
Practical, sturdy and very useful device holding up to 16 or 9 material rolls (according to
the model), keeping your work shop tidy.
Model no. 9 includes:
- Base plate (580 x 580 mm) with 9 positions, 4 castors
- 9 studs for ø 3’’ + 3 studs for ø 2’’
- The base plate allows to freely position up to 9 studs
Model no. 16 includes:
- Base plate (720 x 720 mm) with 16 positions, 4 castors
- 16 studs for ø 3’’ + 4 studs for ø 2’’
- The base plate allows to freely position up to 16 studs
- Sturdy castors for easy moving
- Practical grip whole
REF.
65850040
65850050
ROLL HOLDER - 16 ROLLS, 16 supports for 3" core + 4 supports for 2"
ROLL HOLDER - 9 ROLLS, 9 supports for 3" core + 3 supports for 2"
39
Copyright © 2013 FLEXA SRL. All rights reserved. Tutti i diritti riservati.
Automation for sign makers
Via dell'Industria, 11 - 31014 Colle Umberto (TV) ITALY
Tel. +39 0438 38565 - Fax +39 0438 38767 www.flexa.it
flexa@flexa.it
Main Catalog 2014.01
MAT&Co
FELT PADDLES
Special felt paddles for a precise and delicate laying of adhesives and film. Very useful for
the applications on bented surfaces (e.g. cars)
-
Dimensions: 100 x 64 x 14 mm
Made from a heavy duty impregnated felt material
Easily adaptable to irregular surfaces
Customisable with your logo for advertising (min. 200 pcs.)
REF.
650200010
RMNL
FLEXA FELT PADDLE
HAND ROLLERS
Hand rollers, ideal for the rapid application of tape, adhesive film and reflective materials.
-
Anti-adhesive EPDM rubber roller
2 models available with soft rubber (red) and hard rubber (grey)
Mounted on high-fluency bushings
Robust construction, powder-painted
Ergonomic grip in antislip rubber
REF.
065300300
CLEANER ROLLER width 200 mm - special rubber
RMNL 200 - width 200 mm - hard grey rubber (d.40 mm - 65 sh.)
RMNL 150 - width 150 mm - hard grey rubber (d.40 mm - 65 sh.)
RMNL 100 - width 100 mm - hard grey rubber (d.40 mm - 65 sh.)
RMNL 100 - width 100 mm - soft red rubber
(d.40 mm - 30 sh.)
RMNL 70 - width 70 mm - hard grey rubber
(d.40 mm - 65 sh.)
RMNL 70 - width 70 mm - soft red rubber
(d.40 mm - 30 sh.)
650800010
PERFORATING ROLLER for eliminating air bubbles
065300340
065300040
065300030
065300020
065300310
065300010
CLIP
Accessory to hook material on rolls and prevent its unwinding. It is a simple system that
saves time and money. It avoids the use of adhesive tape for preventing the undwinding of the rolls
after their first use and the consequent loss of materials due to glue residues.
Clip is made of a special elastic plastic and can be adapted to rolls of various diameters
It can also be used to secure rewound prints.
REF.
650800020
CLIP
(50 pcs)
MAGS
MAGS is a magnet accessory for those who need a "third hand" for the application of
tapes on cars.
It is a great help for any application on magnetic material. Can be used to secure accessories
in the working area.
A special rubber around the magnet core allows to preserve every kind of surface.
REF.
650800060
650800050
MAGS- magnetic material holders for application - STANDARD size
MAGS- magnetic material holders for application - KING size
MAT&Co
CORNER ROUNDER
This corner rounder cuts and rounds off the corners of Dibond®, PVC, paper, laminated
paper and many other materials. Very easy to use, quick and precise in just one operation.
The blades are maintenance-free and very easy to change, for many cutting solutions (various sizes
of corners, holes and semicircles).
REF.
650300010
650300020
650300030
650300040
650300050
650300060
650300070
650300080
650300090
CORNER ROUNDER (3 Blades included R10, R6, R3.5*)
* Round blade R3.5 - 1/8" (3.5 mm) - supplied standard
* Round blade R6 - 1/4" (6 mm) - supplied standard
* Round blade R10 - 3/8" (10 mm) - supplied standard
Straight Knife
Holepunch D6 1/4" (6 mm)
Semicircular knife D21 13/16" (21 mm)
Right and left register squares
Protection blade (plastic disk) (spare part, 5 pcs)
40
Copyright © 2013 FLEXA SRL. All rights reserved. Tutti i diritti riservati.
Automation for sign makers
Via dell'Industria, 11 - 31014 Colle Umberto (TV) ITALY
Tel. +39 0438 38565 - Fax +39 0438 38767 www.flexa.it
flexa@flexa.it
Main Catalog 2014.01
EASY-BAR
EASY BAR is a linear bar with a ruler on both sides that protects your fingers even during
hard materials cuts. Available in different sizes up to 3 m. lenght.
Anti-slip rubber on the lower surface.
Satin-finished surface in aluminium alloy and ergonomic hand protector shape
REF.
065550050
065550040
065550030
065550020
065550010
CUTTING MAT
EASYBAR
EASYBAR
EASYBAR
EASYBAR
EASYBAR
300
250
200
150
100
cm
cm
cm
cm
cm
Rubber-coated cutting mats
These professional rubber self-healing cutting mats guarantee a long-lasting surface that
allows to easily and safely cut. Ideal for working on a dust-free surface. Hard-wearing
protection for the desktop.
- Reticular surface (printed markings)
- Extra-hard 3 mm thickness
- Anti-static, non-glare surface
REF.
650400010
650400020
650400030
650400040
650400050
650400060
CUTTING
CUTTING
CUTTING
CUTTING
CUTTING
CUTTING
MAT
MAT
MAT
MAT
MAT
MAT
100 x 200 cm 100 x 200 cm 100 x 150 cm 100 x 150 cm 91 x 121 cm 91 x 121 cm -
single piece
5 pc pack
single piece
5 pc pack
single piece
5 pc pack
DISPLAYS & FRAMES
SPRING Line
645500010
[10 pcs]
SPRING frame anodised silver bar length 4 m, section 12 x 12 mm
645500020
[10 pcs]
Assembly KIT for SPRING frame (incl. 4 angles with springs and clips)
645500030
[10 pcs] CLIPS for connecting frames
[10 pcs] T-JOINT for connect two rods
[10 pcs] SUCTION CUP for application on shop window
[1 pcs] PEDESTAL for SPRING frame, base only, black with threaded pin and screw
645500040
645500050
645500060
645500070
645500080
645500090
645500100
645500110
645500120
[1
[1
[5
[1
[1
[1
pcs]
pcs]
pcs]
pcs]
pcs]
pcs]
SPRING
SPRING
SPRING
SPRING
SPRING
SPRING
KIT
KIT
KIT
KIT
KIT
KIT
100 X 140 cm silver
100 X 140 cm black
70 X 100 cm silver
70 X 100 cm black
70 X 100 cm red
70 X 100 cm white
EASY-SPRING Line
645550010
645550020
[10 pcs] EASY-SPRING frame anodized silver 2 m
[10 pcs] Assembly kit for EASY-SPRING
645550030
[5 pcs] Support base for EASY-SPRING in round transparent plastic
645550040
[5 pcs] Support base for EASY-SPRING in round black plastic
645550050
[5 pcs] Support base for EASY-SPRING in round blue plastic
645550060
[5 pcs] EASY-SPRING KIT 60 X 84 cm silver
645550070
[5 pcs] EASY-SPRING KIT 42 X 60 cm silver
645550080
[5 pcs] EASY-SPRING KIT 30 x 42 cm silver
645550090
[5 pcs] EASY-SPRING KIT 21 x 30 cm silver
FRAME Line
645600100
[10 pcs]
[10 pcs]
[10 pcs]
[10 pcs]
[10 pcs]
[10 pcs]
[100 pcs]
[100 pcs]
[100 pcs]
[100 pcs]
FRAME frame anodized silver 3100 mm
FRAME frame anodized black 3100 mm
FRAME KIT 100 x 140 cm anodized silver
FRAME KIT 100 x 140 cm anodized black
FRAME KIT 70 x 100 cm anodized silver
FRAME KIT 70 x 100 cm anodized black
Angle for FRAME (blocking square, screws and angle plate)
FRAME spring to compensate thickness
Light hanger FLEXA CLICK for FRAME
Heavy hanger FLEXA BLOCK for FRAME
645600110
[10 pcs]
Assembly KIT FRAME (4 angles, 2 Flexa clicks and 8 springs)
645600010
645600020
645600030
645600040
645600050
645600060
645600070
645600080
645600090
41
Copyright © 2013 FLEXA SRL. All rights reserved. Tutti i diritti riservati.
Automation for sign makers
Via dell'Industria, 11 - 31014 Colle Umberto (TV) ITALY
Tel. +39 0438 38565 - Fax +39 0438 38767 www.flexa.it
645650010
645650020
645650030
645650040
flexa@flexa.it
Main Catalog 2014.01
HANGERS for rigid panels :
[200 pcs] Perforation hanger FLEXA GRIP for light panels
[200 pcs] Perforation hanger FLEXA GRIP 2 for Forex and MDF
[200 pcs] Perforation hanger FLEXA GRIP 3 for Forex and MDF
[200 pcs] Self-adhesive hanger FLEXA TACK for panels
GRIP
GRIP 2
GRIP 3
TACK
DISPLAY UNITS
FLEXA SAIL Line
650500010
650500010
650500010
650500040
650500050
650500060
Single-sided FLEXA SAIL display, 100 x 210 (h) cm, with bag [1 pc / 1..30pcs]
Single-sided FLEXA SAIL display, 100 x 210 (h) cm, with bag [1 pc / 31..99 pcs]
Single-sided FLEXA SAIL display, 100 x 210 (h) cm, with bag [1pz / 100 + pcs]
Double-sided FLEXA SAIL display, 100 x 210 (h) cm, with bag
Magnetic folder support for FLEXA SAIL size DIN A4
Magnetic folder support for FLEXA SAIL size DIN A5
42
Copyright © 2013 FLEXA SRL. All rights reserved. Tutti i diritti riservati.
NOTE
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising