Aurora 450/650/850
Line Interactive UPS
Aurora 450/650/850
Microprocessor Control for High Reliability
Best Cost Performance Balance Design
Aurora series UPS applies microprocessor controller for
managing the power components. The technology highly
raises the reliable and stable performance.
Aurora series UPS adopts advanced new structure for
lowering the manufacturing cost but still maintain excellent
performance.
Boost and Buck AVR to Stabilize Input
Voltage
Built-in DC Start Function
Aurora series UPS equipped with boost and buck AVR
feature for providing extraordinary stable voltage. This
provides extra protection in the area where the AC input
voltage is constantly unstable.
Green Power Function for Efficient Energy
Saving
Aurora series UPS meets the highest standard for energy
saving. When in battery mode and the load can hardly be
detected, the system will cease releasing power for energy
saving.
Aurora series UPS can start up automatically without AC
power supplied.
Auto Restart Function
When AC input power is back on line, the UPS can
automatically start without manual setting up.
Overload Protection
When in different status of overload conditions, alert or shut
down action will be performed for preventing further damage
to the UPS.
Aurora 450 / 650 / 850 SPECIFICATION
MODEL
CAPACITY
INPUT
VA/W
Aurora 450
Aurora 650
Aurora 850
450VA/240W
650VA/360W
850VA/480W
Voltage
120VAC or 230VAC
Voltage Range
89-145VAC / 170-280VAC
Voltage
110/120VAC or 220/230/240VAC
Voltage Regulation(Batt.
Mode)
OUTPUT
±10%
Frequency
50Hz or 60Hz
Frequency Regulation
(Batt. Mode)
+/-1 Hz
Output Waveform
Battery Type & Number
BATTERY
Back up Time (at a PC load
with 15" monitor)
Modified Sine Wave
12V/4.5AH x 1
12V/7AH x 1
12V/9AH x 1
5~8 minutes
10~15 minutes
15~20 minutes
Recharge Time
TRANSFER TIME
INDICATOR
AUDIBLE ALARM
6 hours max. (Recharge to 90% Capacity)
Typical
2-6 ms typical, 10 ms max.
AC Mode
Green LED lighting
Backup Mode
Green LED Flashing
Battery Mode
Sounding every 10 seconds
Battery Low
Sounding every 1 second
Overload
Sounding every 0.5 second
Fault
PROTECTION
PHYSICAL
ENVIRONMENT
Continuously Sounding
Full Protection
Discharge, overcharge, and overload protection
Dimension, DXWXH (mm)
Net Weight (kgs)
278x100x143
3.5kgs
4.4kgs
Operating Environment
0°C to 40°C
Noise Level
Less than 40dB
* Product specifications are subject to change without further notice
Selectable Output
220/230/240V
110/120V
5.0kgs
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising