Nova T* Wallbox Controls
Wallbox Controls
Dimmers, Switches, and Accessories
369616g 1 12.19.14
Nova T*® Controls
This series of classic thin-profile linear-slide dimmers and
switches offers the following standard features:
• Square Law Dimming
• Voltage compensation (not applicable to NTCL-250)
• Power-failure memory
• Superior RFI suppression
• Captive linear slider
• Accessible air-gap switch
• Electrostatic discharge tested
• Precise color matching
• Heavy-duty components for surge protection and long
product life
• 100% factory tested
Product Family Features
• Available for 120–277~ line voltage switching (sink only
control) 0–10 V- LED drivers and ballasts (power pack not
required for loads up to 8 A)
• Excellent for residential or commercial applications
• Intuitive operation–easy to use
• Slide-to-off and preset models available
• Enclosed heat sink for aesthetically pleasing appearance
• Multigang alignment for quick and easy installation
• Full family of products for most lighting sources, plus
matching accessories and wallplates
• Rated at 120 V~ 60 Hz, unless noted otherwise
• Custom products (CPN) are available to meet specific
customer needs. Please contact Lutron® Customer
Service at 888.588.7661 for availability.
Regulatory Approvals
•UL®
•CSA
•NOM
Colors and Finishes
When ordering product for use with metal wallplates, the
product and wallplate must be ordered separately. See the
Architectural Wallplates and Accessories section of
Volume 1: Basic Devices and Single-Space Systems
Catalog (P/N 367-1746) for ordering procedure. See right
for complete list of metal finishes.
Custom color matching is available for all Nova T*®
products. A swatch or sample is all that is required. Call
customer service to arrange for a color-matched control.
Engraving is available for all Nova T*® products. Engraving
schedules are available at www.lutron.com/engraving or
through Customer Service at 888.588.7661.
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Slide-to-Off Controls
Select light level with slider;
slide down to off
Preset Controls
Select light level with slider;
press on/off
Available Colors and Finishes
Matte Finishes
Add color/finish suffix to model number to order.
Example: NT-600-WH
WH White GR Gray
BE Beige TP Taupe
IV
Ivory SI
Sienna
AL Almond
BRBrown
LA Light Almond BL Black
Special Order
Add color/finish suffix to model number to order.
Example: NT-600-BB
Metal Finishes
SB Satin Brass BB
BC Bright Chrome
Special Metal Finishes
QB Antique Brass QZ
SC Satin Chrome SN
BN Bright Nickel
Anodized Aluminum Finishes
CLA Clear BLA
BRABrass
Bright Brass
Antique Bronze
Satin Nickel
Black
Page
Wallbox Controls
Dimmers, Switches, and Accessories
369616g 2 12.19.14
Dimensions
Dimensions are shown as: in (mm).
Small Control
Large Control
Profile
Back Views: NT- models
NT-600
NT-1000
4.56
(116)
2.75
(70)
NT-1500
0.30 (8)
2.75
(70)
4.56
(116)
1.31
(33)
NT-2000
Note: Some models
up to 1.9 (48)
Available Controls and Accessories (Summary)
For specific uses, capacities, and model numbers, see the following pages.
Slide-to-Off
Dimmers
Preset
Dimmers
Small
Control
Small
Control
Large
Control
Large
Control
Linear-Slide
Switches
Slide-to-Off
Fan-Speed Controls
Small
Control
Small
Control
Large
Control
Receptacles and Plugs
15 A
20 A
Receptacles
15 A
20 A
GFCI
Receptacles
15 A 20 A
Isolated Ground
Receptacles
15 A 20 A
Duplex for
Dimming Use
15 A 20 A
Half for
Dimming Use
10 A
Replacement Plug
for Dimming Use
Jacks and Ports
Single
Double
Triple
Cable
Telephone Telephone Telephone TV
®
Job Name:
Job Number:
Telephone/ 6-Port
Cable TV Frame
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
Dimmers, Switches, and Accessories
Wallbox Controls
369616g 3 12.19.14
Control Specifications
Incandescent Dimmers: Slide-to-Off
Small Control
Large Control
Description
Maximum Capacity
Model Number
Single pole 120 V~ 60 Hz
600 W
NT-600-XX
Single pole 120 V~ 60 Hz
1000 W
NT-1000-XX
Single pole 120 V~ 60 Hz
1500 W
NT-1500-XX
Single pole 120 V~ 60 Hz
1950 W
NT-2000-XX
The NT-2000-XX does not have removable side sections; it can be ganged but must be kept intact.
The NT-2000-XX requires a 2-gang wallbox.
Incandescent Dimmers: Preset
Small Control
Large Control
Description
Maximum Capacity
Model Number
Single pole/3-way/4-way 120 V~ 60 Hz
600 W
NT-603P-XX
Single pole/3-way/4-way 120 V~ 60 Hz
1000 W
NT-1003P-XX
Single pole/3-way/4-way 120 V~ 60 Hz
1500 W
NT-1503P-XX
For 3-way or 4-way switching, use NT-3PS-XX (3-way), NT-4PS-XX (4-way), or other mechanical switches.
C)LR Dimmers: Slide-to-Off
Small Control
Description
Maximum Capacity
Dimmable CFL/LED
Single pole 120 V~ 60 Hz
250 W
Incandescent/Halogen
Single pole 120 V~ 60 Hz
1000 W
Hi-lume A-Series LTE LED driver
Single pole 120 V~ 60 Hz
400 W (maximum of 10 drivers)
Mixed bulb type
Single pole 120 V~ 60 Hz
See Derating: Maximum Capacities
in Multigang Installations
Model Number
NTCL-250-XX
Application requirements:
When dimming CFLs or LEDs, only bulbs marked or rated as DIMMABLE and on the recommended list may be used.
For a complete list of recommended DIMMABLE CFLs and LEDs please visit www.lutron.com/dimcflled. For questions call 1.800.523.9466.
Some DIMMABLE CFLs and LEDs require a minimum number of bulbs for proper operation. For details and the bulb list, visit www.lutron.com/dimcflled
For LED product selection tool, visit www.lutron.com/ledtool
Features:
Low-end adjustment to accommodate a wide range of bulbs.
HEDT Technology: Advanced LutronR dimming circuitry designed for compatibility with most high efficacy light bulbs.
NEMA SSL-7A Type 2 compliant.
Electronic Low-Voltage (ELV) Dimmers: Slide-to-Off
Small Control
Description
Maximum Capacity
Model Number
Single pole 120 V~ 60 Hz
300 W
NTELV-300-XX
Single pole 120 V~ 60 Hz
600 W
NTELV-600-XX
Maximum capacity is permitted lamp wattage.
Requires neutral wire connection.
For larger capacity ELV loads (up to 1000 W), use Nova T*R fluorescent dimmers (NTF-10-XX or NTF-103P-XX) with an PHPM-WBX interface.
(continued on next page...)
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
Wallbox Controls
Dimmers, Switches, and Accessories
369616g 4 12.19.14
Control Specifications (continued)
Magnetic Low-Voltage (MLV) Dimmers: Slide-to-Off
Small Control
Large Control
Description
Maximum Capacity
Model Number
Single pole 120 V~ 60 Hz
600 VA / 450 W
NTLV-600-XX
Single pole 277 V~ 60 Hz
600 VA / 450 W
NTLV-600-277-XX
Single pole 120 V~ 60 Hz
1000 VA / 800 W
NTLV-1000-XX
Single pole 277 V~ 60 Hz
1000 VA / 800 W
NTLV-1000-277-XX
Single pole 120 V~ 60 Hz
1500 VA / 1200 W
NTLV-1500-XX
Description
Maximum Capacity
Model Number
Single pole/3-way/4-way 120 V~ 60 Hz
600 VA / 450 W
NTLV-603P-XX
Single pole/3-way/4-way 120 V~ 60 Hz
1000 VA / 800 W
NTLV-1003P-XX
Single pole/3-way/4-way 120 V~ 60 Hz
1500 VA / 1200 W
NTLV-1503P-XX
Maximum capacity is permitted lamp wattage.
277 V~ models require neutral wire connection.
Magnetic Low-Voltage (MLV) Dimmers: Preset
Small Control
Large Control
For 3-way or 4-way switching, use NT-3PS-XX (3-way), NT-4PS-XX (4-way), or other mechanical switches.
Fluorescent Dimmers for LutronR 3-wire fluorescent ballasts or LED drivers: Slide-to-Off
Small Control
Description
Maximum Capacity
Model Number
Single pole 120 V~ 60 Hz
16 A
NTF-10-XX
Single pole 277 V~ 60 Hz
8A
NTF-10-277-XX
Use with Lutron® 3-wire fluorescent ballasts or LED drivers only.
For LED loads, please see the “Report Cards” at www.lutron.com/hilumeled for proper loading of the dimmer.
No derating required.
To determine the number of ballasts that can be controlled by Nova T*® fluorescent dimmer, divide the control capacity by the ballast current. For a complete list of
Lutron® ballasts and ballast currents, see the Fluorescent Dimming System Selection Guide (P/N 366002) at www.lutron.com.
Fluorescent Dimmers for LutronR 3-wire fluorescent ballasts or LED Drivers: Preset
Small Control
Description
Maximum Capacity
Model Number
Single pole/3-way 120 V~ 60 Hz
8A
NTF-103P-XX
Single pole/3-way 277 V~ 60 Hz
6A
NTF-103P-277-XX
Use with Lutron® 3-wire fluorescent ballasts or LED drivers only.
For LED loads, please see the “Report Cards” at www.lutron.com/hilumeled for proper loading of the dimmer.
For 3-way or 4-way switching, use NT-3PS-XX (3-way), NT-4PS-XX (4-way), or other mechanical switches. No derating required.
To determine the number of ballasts that can be controlled by Nova T *® fluorescent dimmer, divide the control capacity by the ballast current. For a complete list of
LutronR ballasts and ballast currents, see the Fluorescent Dimming System Selection Guide (P/N 366002) at www.lutron.com.
(continued on next page...)
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
Dimmers, Switches, and Accessories
Wallbox Controls
369616g 5 12.19.14
Control Specifications (continued)
0–10 V- Dimmers for Electronic Ballasts or LED Drivers: Slide-to-Off
Description
Small Control
Single pole 0–10 V- 120–277 V~
Maximum Capacity *
Load
0–10 V- Sink
8A
30 mA
Model Number
NTSTV-DV-XX
Power pack not required for loads up to 8 A. May use LutronR power pack (model PP-DV or PP347H; see Lutron® P/N 369544) for higher load current applications or
for Class 2 installations.
Compatible with any IEC 60929 annex E compliant LED drivers and ballasts. Refer to LED driver and ballast manufacturer's specification for 0–10 V- sink currents.
Control has a high and low end trim to adjust the 0–10 V- output for optimal dimming performance.
* Limited by whichever rating is achieved first.
Fluorescent Dimmers for Tu-WireR Electronic Ballasts: Slide-to-Off
Small Control
Description
Maximum Capacity
Model Number
Single pole 120 V~ 60 Hz
5A
NTFTU-5A-XX
Single pole 277 V~ 60 Hz
5A
NTFTU-5A-277-XX
Use with Lutron® Tu-WireR line voltage control electronic dimming ballasts only.
To determine the number of ballasts that can be controlled by Nova T*® fluorescent dimmer, divide the control capacity by the ballast current. For a complete list of
Lutron® ballasts and ballast currents, see the Fluorescent Dimming System Selection Guide (P/N 366002) at www.lutron.com.
Compatible with Advance® Mark XR and Sylvania Powersense® ballasts.
Fluorescent Dimmers for AdvanceR Mark XR VEZ series 277 V~ Ballasts: Preset
Small Control
Description
Maximum Capacity
Model Number
3-way 277 V~ 60 Hz
3A
NTFTU-3AP-277-XX-CPW0196
For control of permanently installed AdvanceR Mark X® VEZ series 277 V~ ballasts only.
Install on load side only.
No derating required.
To determine the number of ballasts that can be controlled by Nova T*® fluorescent dimmer, divide the control capacity by the ballast current. For a
complete list of Lutron® ballasts and ballast currents, see the Fluorescent Dimming System Selection Guide (P/N 366002) at www.lutron.com.
Linear-Slide Switches for General Purpose: All Sources and Motor Loads
Small Control
Description
Maximum Capacity
Model Number
Single pole 120 / 277 V~ 60 Hz
20 A
NT-1PS-XX
3-way 120 / 277 V~ 60 Hz
20 A
NT-3PS-XX
4-way 120 / 277 V~ 60 Hz
20 A
NT-4PS-XX
No derating required.
Advance and Mark X are registered trademarks of Phillips Corporation.
Powersense is a registered trademark of Sylvania Corporation.
(continued on next page...)
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
Dimmers, Switches, and Accessories
Wallbox Controls
369616g 6 12.19.14
Control Specifications (continued)
Fan-Speed Controls: Quiet
Small Control
Description
Maximum Capacity
Model Number
Single pole, 3-speed 120 V~ 60 Hz
1.5 A
NTFSQ-XX
Description
Maximum Capacity
Model Number
Single pole,
Adjustable minimum speed
120 V~ 60 Hz
6A
NTFS-6E-XX
Single pole,
Adjustable minimum speed
120 V~ 60 Hz
12 A
NTFS-12E-XX
For use with one ceiling paddle fan.
No derating required.
Fan-Speed Controls: Fully Variable
Small Control
Large Control
For use with one or more ceiling, ventilation, or exhaust fans. Do not mix fan types on same control.
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
Wallbox Controls
Dimmers, Switches, and Accessories
369616g 7 12.19.14
Accessory Specifications
Receptacles and Plugs
Description
Receptacle
Tamper Resistant Receptacle
Maximum Capacity
Model Number
15 A 125 V~
NTR-15-XX
20 A 125 V~
NTR-20-XX
15 A 125 V~
NTR-15-TR-XX
20 A 125 V~
NTR-20-TR-XX
No derating required.
Description
Tamper Resistance GFCI Receptacle
Maximum Capacity
Model Number
15 A 125 V~
NTR-15-GFTR-XX
20 A 125 V~
NTR-20-GFTR-XX
Maximum Capacity
Model Number
15 A 125 V~
NTR-15-IG-OR-XX
20 A 125 V~
NTR-20-IG-OR-XX
Insert is permanently attached to the back cover.
No derating required.
Description
Isolated Ground Receptacle
Insert is orange; wallplate is color selected.
Receptacles can be special-ordered to match wallplate color; contact Lutron® Customer Service at 888.588.7661 or visit www.lutron.com.
No derating required.
Description
Maximum Capacity
Model Number
Tamper Resistant Duplex for Dimming
Use
15 A 125 V~
NTR-15-DDTR-XX
20 A 125 V~
NTR-20-DDTR-XX
Maximum Capacity
Model Number
15 A 125 V~
NTR-15-HDTR-XX
20 A 125 V~
NTR-20-HDTR-XX
Description
Maximum Capacity
Model Number
Replacement Plug
for Dimming Use
10 A 125 V~
RP-FDU-10-XX
Insert is permanently attached to the back cover.
No derating required.
Description
Tamper Resistant Half for Dimming Use
Insert is permanently attached.
No derating required.
(continued on next page...)
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
Wallbox Controls
Dimmers, Switches, and Accessories
369616g 8 12.19.14
Accessory Specifications (continued)
Description
Model Number
Single Telephone Jack
6-conductor RJ11
Also accepts most 4-conductor
plugs
NT-PJ-XX
Cable TV Jack
F-style 75 Ohm coaxial cable
NT-CJ-XX
Accessory Type
No derating required for any cable jack configurations.
A physical barrier (partition) must exist when ganging with any line-voltage products.
Field Customizable 6-port frame
Ships with 6 blank ports. Use
with connectors shown below.
Each connector fills 1 port.
NT-6PF-XX
6-conductor RJ11 Category 3
CON-1P-C3-WH
8-conductor RJ45 Category 5e
CON-1P-C5E-WH
8-conductor RJ45 Category 6
CON-1P-C6-WH
Fiber Jack Connector
MT-RJ feed-through
CON-1F-MTRJ-WH
Fiber Jack Connector
SC simplex
CON-1F-SC-WH
Fiber Jack Connector
LC non-flush mount
CON-1F-LC-WH
Fiber Jack Connector
ST style
CON-1F-ST-WH
Cable Jack Connector
F-style 75 Ohm coaxial cable
CON-1C-WH
BNC Jack Connector
BNC connector
CON-1B-WH
Telephone Jack Connector
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
Wallbox Controls
Dimmers, Switches, and Accessories
369616g 9 12.19.14
Wallplate Specifications
Wallplate Images
Description
Dimensions (w x h)
Model Number
Single gang:
For 1 small control
(provided with control)
2.75 in x 4.56 in
(70 mm x 116 mm)
VWP-1-XX
Single gang:
For 1 accessory
2.75 in x 4.56 in
(70 mm x 116 mm)
VWP-R-XX
2 Gang:
For 2 small controls
4.56 in x 4.56 in
(116 mm x 116 mm)
VWP-2-XX
2 Gang:
For 2 accessories
4.56 in x 4.56 in
(116 mm x 116 mm)
VWP-2R-XX
2 Gang:
For 1 small control (left) and
1 accessory (right)
4.56 in x 4.56 in
(116 mm x 116 mm)
VWP-2CR-XX
2 Gang:
For 1 accessory (left) and
1 small control (right)
4.56 in x 4.56 in
(116 mm x 116 mm)
VWP-2RC-XX
3 Gang:
For 3 small controls
6.32 in x 4.56 in
(161 mm x 116 mm)
VWP-3-XX
4 Gang:
For 4 small controls
8.45 in x 4.56 in
(215 mm x 116 mm)
VWP-4-XX
For other configurations, including small controls, large controls, and accessories, refer to the Specification Guide
on the Dimmers & Switches product page at www.lutron.com, or call Lutron® Customer Service at 888.588.7661
for assistance.
For other faceplates, see the Lutron Custom Architectural Multi-gang tool at:
www.lutron.com/en-US/service-support/Pages/technical/design-selectiontools/multigang.aspx
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
Wallbox Controls
Dimmers, Switches, and Accessories
369616g 10 12.19.14
Derating: Maximum Capacities in Multigang Installations*
When installing more than one Dimmer in the same wallbox, it may be necessary to remove some side sections prior to wiring (see diagram
below). Removal of side sections may reduce maximum wattage, as shown in the charts below.
Mixing bulb types (using a combination of CFL/LED and Incandescent/Halogen bulbs) will also affect the maximum ratings, as shown in the
chart below.
EXAMPLE: If one set of side sections is removed and you have eight 9 W LED bulbs installed (Total LED Wattage = 72 W), you may add up
to 500 W of Incandescent or Halogen lighting.
Do not remove
outside sections
Middle control has two side
sections removed
Each control has inside
sections removed
Single Units
Full capacity
No side sections
removed
End Units
One side
section
removed
Middle Units
Two side
sections
removed
Incandescent Controls
600 W
500 W
300 W
1000 W
900 W
700 W
1500 W
1250 W
1000 W
1950 W
—
—
NT-2000-XX controls (for 1950 W capacity) must be ganged without removing side
sections.
C)LR Controls
Maximum Allowable Incandescent/Halogen Wattage
1000 W
800 W
600 W
800 W
600 W
500 W
600 W
500 W
400 W
500 W
400 W
300 W
400 W
300 W
200 W
300 W
200 W
100 W
0W
0W
0W
CFL
LED
LFCA Total CFL/LED Wattage Installed
DEL
AFC
(Wattage per bulb x # of bulbs)
+
+
+
+
+
+
+
+
0W
1 W – 40 W
41 W – 80 W
81 W – 120 W
121 W – 160 W
161 W – 200 W
201 W – 250 W
No derating is requried for multigang installations if only LED bulbs are used or if no fins are broken.
* For more information on multigang installations, visit www.lutron.com/en-US/Service-Support/Pages/Technical/InstallationInstructions/Ganging-Derating/GangingDerating.aspx
(continued on next page...)
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
Dimmers, Switches, and Accessories
Wallbox Controls
369616g 11 12.19.14
Derating: Maximum Capacities in Multigang Installations (continued)
Single Units
Full capacity
No side sections removed
End Units
One side section
removed
Middle Units
Two side sections
removed
Electronic Low-Voltage (ELV) Controls
300 W
300 W
250 W
600 W
500 W
400 W
Permitted lamp wattage for ELV controls.
Magnetic Low-Voltage (MLV) Controls
600 VA/450 W
500 VA/400 W
300 VA / 250 W
1000 VA/800 W
900 VA/750 W
700 VA / 500 W
1500 VA/1200 W
1250 VA/1000 W
1000 VA / 800 W
Permitted lamp wattage for MLV controls.
Fluorescent 3-Wire Ballast or LED Driver Controls
6A
No derating required
8A
No derating required
16 A
No derating required
Fluorescent Tu-WireR Controls
3A
No derating required
5A
4A
3.3 A
0-10 V- Electronic Ballast or LED Driver Controls
Load
0–10 V- Sink
8A
30 mA
No derating required
Quiet Fan-Speed Controls
1.5 A
No derating required
Fully Variable Fan-Speed Controls
6A
4.2 A
2.5 A
12 A
10 A
8.3 A
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
Wallbox Controls
Dimmers, Switches, and Accessories
369616g 12 12.19.14
Wiring Diagrams: Single Location
Single-Pole
Black
or
Red
Black
¤¹ Control ¤¹
Line
Green ¤²
Load
NT-600-XX
NT-1000-XX
NT-1500-XX
NT-2000-XX
NTCL-250-XX
NTLV-600-XX
NTLV-1000-XX
NTLV-1500-XX
NT-1PS-XX
NTFSQ-XX
Neutral
Line
Red
Black
Control
Green
¤¹ Brass screw terminal
¤² Green screw terminal
Note: Controls will have either
screw terminals or wires.
Wire connector
3-Way Control
Red
¤²
Control
¤²
Red or
Green ¤³ Red/White
(cap off)
NT-603P-XX
NT-1003P-XX
NT-1503P-XX
NTLV-603P-XX
NTLV-1003P-XX
NTLV-1503P-XX
NT-3PS-XX
Black
¤¹
Neutral
Yellow (cap off)
Switched full
voltage only
Load
(fan)
Wire connector
With Neutral
Black
¤¹
Control
¤³
Green
Wire connector
Fan/Light
NTFS-6E-XX
NTFS-12E-XX
Black
Line
Red
Control
Green
Neutral
Ground
Yellow
Fan
Incandescent load
Switched full
voltage only
Wire connector
NTELV-300-XX
NTELV-600-XX
NTLV-600-277-XX
NTLV-1000-277-XX
Use NTELV models
with 120 V only
Red or
Yellow
¤²
White
Ground
Load
¤¹ Copper/Black screw terminal
¤²* Brass screw terminal
¤³ Green screw terminal
Note: Controls will have either
screw terminals or wires.
Ground
Line
NTFS-6E-XX
NTFS-12E-XX
Neutral
Ground
Line
Fan
Load
Neutral
Ground
Wire connector
®
Job Name:
Job Number:
¤¹ Copper/Black screw terminal
¤² Brass screw terminal
¤³ Green screw terminal
Note: Controls will have either
screw terminals or wires.
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
Wallbox Controls
Dimmers, Switches, and Accessories
369616g 13 12.19.14
Wiring Diagrams: Multi-Location
3-Way
Control Line Side
Control Load Side
Line
Line Black
Red
Black
¤² 3-way ¤¹
¤¹ 3-way ¤²
switch ¤²
¤² dimmer
Red
¤³
Green ¤³
or
Red/White
Black
Red
Black
¤² 3-way ¤¹
¤¹ 3-way ¤²
dimmer ¤²
¤² switch
Red
¤³
Green ¤³ or
Red/White
Neutral
Load
NT-603P-XX
NT-1003P-XX
NT-1503P-XX
NTLV-603P-XX
NTLV-1003P-XX
NTLV-1503P-XX
NT-3PS-XX
Load
Neutral
Ground
¤¹ Copper/Black screw terminal
¤² Brass/Gold screw terminal
¤³ Green screw terminal
Note: Controls will have either screw terminals or wires.
Wire connector
4-Way
Control Line Side
Line
Black
Red
¤¹ 3-way ¤²
¤¹ 4-way ¤²
dimmer ¤²
¤¹ switch ¤²
Red
Green ¤³
Green ¤³ or
Red/White
NT-603P-XX
NT-1003P-XX
NT-1503P-XX
NTLV-603P-XX
NTLV-1003P-XX
NTLV-1503P-XX
NT-3PS-XX
NT-4PS-XX
¤¹ 3-way ¤²
¤¹ switch
Red
or
Red/
White
¤³
Green
Load
Neutral
Control Load Side
Line
Black
Red
¤¹ 3-way ¤²
¤¹ 4-way ¤²
switch
switch
¤²
¤¹
¤²
Red
Green ¤³ or
Green ¤³
Red/White
Red
Black
¤¹ 3-way ¤²
dimmer
¤¹
Red
or
Red/
White
¤³
Green
Load
Neutral
Ground
Wire connector
®
Job Name:
Job Number:
¤¹ Copper/Black screw terminal
¤² Brass/Gold screw terminal
¤³ Green screw terminal
Note: Controls will have either screw terminals or wires.
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
Wallbox Controls
Dimmers, Switches, and Accessories
369616g 14 12.19.14
Wiring Diagrams: Accessories
Cable TV Jack
NT-CJ-XX
Tamper Resistant GFCI Receptacle
NTR-15-GFTR-XX
NTR-20-GFTR-XX
Cable TV
Jack
75
Ohm
cable
Ground
75
Ohm
cable
Neutral
Green or bare
Green or bare
White
White
NP
NP
Receptacle
6-Conductor Telephone Jack
(accepts most 4-conductor jacks)
NT-PJ-XX
JackWire
position color
1
White
2
Black
3
Red
4
Green
5
Yellow
6
Blue
Receptacle
Receptacle
Line
Black
White
Brass
screws
Green
screw
NTR-15-XX
NTR-20-XX
NTR-15-IG-OR-XX
NTR-20-IG-OR-XX
NTR-15-TR-XX
NTR-20-TR-XX
Nickelplated
screws
Black
Line
P
P
P
Receptacle
Load
Black
Line
Wire connector
P: Protected
NP: Not Protected
Tamper Resistant Dimmable
Receptacle (Dual)
NTR-15-DDTR-XX
NTR-20-DDTR-XX
Receptacle
Line
Black
Neutral
White
LutronR Dimmed
Dimming Output
Product
Ground or
Isolated Ground
NTR-15-HDTR-XX
NTR-20-HDTR-XX
Receptacle
Wire connector
Line
Black
Neutral
White
Job Number:
GFCI
Receptacle
Tamper Resistant Dimmable
Receptacle (Half)
Ground
Job Name:
NP
Ground or
Isolated Ground
Neutral
®
Green or bare
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
LutronR Dimmed
Dimming Output
Product
Line
Black
Ground or
Isolated Ground
Page
Wallbox Controls
Dimmers, Switches, and Accessories
369616g 15 12.19.14
Wiring Diagrams: NTF- Controls
Single-Pole
Line
Ground
Black
Dimmer
Red
Black
Yellow or
Orange
Orange or Brown Wire connector
1
Typical 4-wire connection
Dimming Ballast
White 2
Green
NTF-10-XX
NTF-10-277-XX
Black
Y ellow/Blue or Yellow/
Green when used with
magnetic dimming ballasts
1 Orange or Brown 1
Dimming Ballast
White 2
Must use lamp disconnect
sockets with magnetic
dimming ballasts
2 Neutral
To additional ballasts
Single-Pole: 3-Way Control
Line Blue
3-Way
Dimmer
Green
White
NTF-103P-XX
NTF-103P-277-XX
Red
Black
Ground
Yellow or
Orange
White 2
Wire connector
Orange or Brown 1
Violet or
Blue
(Cap off)
White 2
Orange or Brown 1
**
Y ellow/Blue or Yellow/
*** when used with
Green
***
magnetic
dimming ballasts
***
2 *
Must use lamp disconnect
***
sockets
with magnetic
***
dimming
ballasts
***
1 Black
Neutral
Typical 4-wire connection
Dimming Ballast
Dimming Ballast
To additional ballasts
3-Way Control Load Side
Line
3-Way
¤² Switch ¤¹
(wire on ¤¹
line side)
Green
Blue
NTF-103P-XX
NTF-103P-277-XX
Black
Red
3-Way
Dimmer Yellow
or Orange
Violet or
Blue
Green
White
White 2
Dimming Ballast
Orange or Brown 1
Black
White 2
Neutral
Dimming Ballast
Orange or Brown 1
Ground
To additional ballasts
Wire connector
Yellow/Blue or Yellow/
Green when used with
magnetic dimming ballasts
2 Must use lamp disconnect
sockets with magnetic
dimming ballasts
1 Typical 4-wire connection
¤¹ Copper/Black screw terminal
¤² Brass/Gold screw terminal
Note: Controls will have either screw terminals or wires.
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
Dimmers, Switches, and Accessories
Wallbox Controls
369616g 16 12.19.14
Wiring Diagrams: NTFTU- Controls
Single-Pole
Line
NTFTU-5A-XX
NTFTU-5A-277-XX
Black
Red
Dimmer
Dimming Ballast
Green or
Bare
Neutral
Ground
Wire connector
Single-Pole: 3-Way Control
NTFTU-3AP-277-XX-CPW0196
Blue
Line
Blue
(Cap off)
Yellow
Black
Dimmer
Dimming Ballast
Green
White
Neutral
Ground
Wire connector
3-Way: Control Load Side
Line
NTFTU-3AP-277-XX-CPW0196
Yellow
Blue
3-Way
Switch
(wire on
line side)
Green
Blue
Black
Dimmer
Dimming Ballast
Green
White
Neutral
Ground
Wire connector
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
Wallbox Controls
Dimmers, Switches, and Accessories
369616g 17 12.19.14
Wiring Diagrams:
Note: The total 0–10 V- control signal wiring for this control should not exceed 500 ft (152.4 m). Do not use wire
smaller than 20 AWG (0.75 mm2). For Class 1 installations, 0–10 V- wires must be run in conduit or approved cable
per NECR or local jurisdiction. For Class 2 installations, conduit is typically not required (local code may apply). For
application with excessive electrical noise, 0–10 V- wires should be run in separate conduit from the mains.
NTSTV-DV-XX Control Class 1 Installation
Neutral
White
Black
Violet (+)
Gray (-)
120 – 277 V~
Black
Violet (+)
Gray (-)
Black
Line
White
Black
Violet (+)
Gray (-)
Control
NTSTV-DV-XX
0–10 V- Dimming
ballast or LED Driver
Ground
Wire connector
0–10 V- Dimming
ballast or LED Driver
Do NOT connect to
line voltage.
1
Maximum Capacity: *
Class 1 0-10 Vcontrol signal
wires.1
Green
To additional ballasts or drivers
Load
0-10 V- Sink
8A
30 mA
* Whichever comes first.
NTSTV-DV-XX Class 2 Installation
NTSTV-DV-XX
On/Off Control using Power Pack (PP-DV or PP-347H)
Ground
Neutral
Wire connector
Red 2
Black
White
Red 2
IEC PELV/NECR
Class 2 wiring:
20 AWG (0.75 mm2)1
Power
Pack
Black Red
Black Blue Black
(cap off)
Control
Green 3
Violet (+)
Gray (-)
Class 2 0–10 Vcontrol signal
wires.1
Black
White
Black
Violet (+)
Gray (-)
0–10 V- Dimming
ballast or LED Driver
White
Black
Violet (+)
Gray (-)
0–10 V- Dimming
ballast or LED Driver
To additional ballasts or drivers
Notice: Lutron is not liable for damage due to miswiring 0–10 V- control signal wires with line
voltage. Do not run Class 2 wires and line voltage conductors together in the same conduit.
®
Job Name:
Job Number:
Do NOT connect to line
voltage
2
18 AWG (1.0 mm2) Red
wires are interchangeable.
Connect either to line/load
side.
3
Green wire may be capped
off for Class 2 installations
ONLY.
1
Line
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Maximum Capacity for
Class 2 Installations:
Load
0-10 V- Sink
*
30 mA
* See PP and UPP Series
Power Packs spec submittal,
Lutron® P/N 369544
Page
Dimmers, Switches, and Accessories
Wallbox Controls
369616g 18 12.19.14
Wiring Diagrams: NTCL-250
Hi-lumeR A-Series LTE LED Driver Installation
Hot
NTCL-250
Dimmer
Dimmed Hot (Black)
+V (Red)2
Hi-lume ®
A-Series LED
Dimming Driver
Ground1
Neutral
Neutral (White)
LED
Light
Engine
–V (Black/White)2
Ground (Green)
1
Ground1
Enclosure and junction box must be grounded in accordance with local and national electrical codes. Ground provided by grounding of junction box
or by using the green ground wire connection.
2
For maximum driver-to-LED light engine wire length, see Hi-lumeR A-Series Constant Voltage Driver spec submittal (P/N 369789).
1
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising