Interceptors

Interceptors
Interceptors_08.qxd
3/27/08
11:58 AM
Page 205
GREASE INTERCEPTORS
Grease Interceptor Features
A grease interceptor is a plumbing device installed in the sanitary drainage system to intercept fats, oils and grease (FOG) from the waste water
discharge. It works by slowing the flow of water into the interceptor, which allows the FOG time to separate from the waste water. The FOG is
contained in the body of the interceptor allowing the FOG-free water to pass downstream by exiting the interceptor via a trap leg. Hydro-mechanical
grease interceptors range in size from small 7 GPM units to large 500 GPM units. Units with installed grease removal devices are self-cleaning.
For maximum grease efficiency JOSAM provides an external flow control with every interceptor which must be used as directed.
60100H-GRD TIMER-CONTROLLED GREASE REMOVAL PUMP
TIMER/CONTROLLER
Wall-mounted Programmable Timer
activates evacuation pump at predetermined time (1-99 Days).
GREASE REMOVAL PUMP
evacuates contained grease
regardless of temperature.
EXTERNAL FLOW CONTROL
WITH AIR INTAKE (Not Shown)
INTERNAL
TRAP LEG
REMOVABLE BAFFLE
SECURED COVER (Removed)
White acid-resisting coating,
gasketed air and watertight,
single-bolt, non-skid safety pattern.
BODY
Steel with white
acid-resisting coating
NO-HUB
Inlet/Outlet Connections
RECLAIM CHAMBER
provides visual evidence that
grease layer is removed, assuring
correct interval has been selected.
205
INTERCEPTORS
GRDP OPTION
includes the sensing
and alarm probe which
enables the use of the
probe as the primary
source of sensing with
the timer as a back-up
system.
Interceptors_08.qxd
3/27/08
11:58 AM
Page 206
INTERCEPTORS
Selection Checklist
This checklist of interceptors is provided as a guide to selection of the proper type interceptor to control specific waste materials. First determine the waste material to be
controlled, then follow the check marks for the types of interceptors recommended.
TYPES OF INTERCEPTORS
SOLIDS INTERCEPTORS
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
How to Order
Select Type Number from Dimension Table and use suffix numbers to indicate options.
EXAMPLE:
Series No. 60100H
Type No. 6010
60106H
-EXT
-ISI
Type No.
Option, Integral Extension
Option, Integrated Solids Interceptor
HOW TO ORDER INTERCEPTORS WITH EXTENDED TOPS
When ordering extensions for Grease and Oil Interceptors (-EXT), specify dimension from the pipe centerline to finished floor.
206
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
61800
P
61040
P
61030
P
61000
P
60810
P
61080
P
P
61070
P
60610-EST
P
60610A-EXT
P
60610A
P
60500-EST
P
60500B-EXT
60210A-EXT
60210A
AUTOMATIC
60100H-ET
60100H-RT
60100H-EXT
60117A
60115A
MANUAL
60100H
60100-SA-ET
60100-SA-RT
60110-SA
60100-SA
SEMIAUTOMATIC
60500B
Barium
Benzine
Cheese
P
Cutting Oils
Elemental Mercury*
Fats
P
Gasoline
Gauze
Glass Grindings
Gravel
Grease
P
Hair
Jewels
Kerosene
Lint
Lubricating Oil
Naphtha
Oil
Oil Sludge
Paraffin
P
Plaster
Precious Metals
Quench Oil
Rouge
Rubber Grindings
Sand
Sediment
Wax
P
*Cast Iron Interceptor Only
60300A
AUTOMATIC
60100H-GRD
INTERCEPTORS
TYPE OF
WASTE
MATERIAL
OIL
SEPARATORS
GREASE INTERCEPTORS
P
P
P
P
P
Interceptors_08.qxd
3/27/08
11:58 AM
Page 207
GREASE INTERCEPTORS
Selection Table
TYPE NO.
RATING
IN G.P.M.
INLET & OUTLET
SIZE (INCHES)
AUTOMATIC TYPE
TYPE NO.
RATING
IN G.P.M.
INLET & OUTLET
SIZE (INCHES)
MANUAL CLEANING TYPE
25
3
60102H, -EXT, -RT, -ET
7
2
60307A
35
3
60103H, -EXT, -RT, -ET
10
2
60308A
50
3
60104H, -EXT, -RT, -ET
15
2
60309A
75
4
60105H, -EXT, -RT, -ET
20
3
60310A
100
4
60106H, -EXT, -RT, -ET
25
3
60311A
150
4
60107H, -EXT, -RT, -ET
35
3
60312A
200
6
60108H, -EXT, -RT, -ET
50
3
60313A
250
6
60109H, -EXT, -RT, -ET
75
3
60314A
350
6
60110H, -EXT, -RT, -ET
100
4
60315A
500
6
MANUAL CLEANING LOW TYPE
60115A
20
2
35
3
SEMI-AUTOMATIC TYPE
60102-SA, -RT, -ET
7
2
60117A
60103-SA, -RT, -ET
10
2
MANUAL CLEANING HIGH VOLUME TYPE
60104-SA, -RT, -ET
15
2
60213A, -EXT
150
4
60105-SA, -RT, -ET
20
3
60214A, -EXT
200
5
60106-SA, -RT, -ET
25
3
60215A, -EXT
250
5
60107-SA, -RT, -ET
35
3
60216A, -EXT
350
6
60108-SA, -RT, -ET
50
3
60217A, -EXT
500
6
35
3
INTERCEPTORS
60306A
SEMI-AUTOMATIC LOW TYPE
60115-SA
GREASE MONITORING DEVICE
EGOLD-1000
CEGOLD-2000
-SAP
Sizing
Consult PDI-G101 or ASME A112.14.3 Standards or your local codes.
207
Interceptors_08.qxd
3/27/08
11:58 AM
Page 208
INTERCEPTORS • Pictorial Selection Guide
MANUAL CLEANING
60100H
60100H-EXT
60100H-ET
60100H-RT
On-Floor Type
Extended Top
Enclosed Top
Recessed Type
Page 211
Page 212
Page 212
Page 213
60115A/60117A
60210A
60210A-EXT
Low-Boy
High Volume
High Volume, Extended Top
Page 216
Page 217
Page 218
INTERCEPTORS
MANUAL CLEANING
SEMI-AUTOMATIC CLEANING
60100-SA
60100-SA-ET
60100-SA-RT
60115-SA
On-Floor Type
Enclosed Type
Recessed Type
Low Boy
Page 214
Page 215
Page 215
Page 216
AUTOMATIC
ELECTRONIC GREASE/OIL LEVEL DETECTORS
60300A
60100H-GRD
EGOLD-1000
CEGOLD-2000
SAP
GI-2000A Fully Electronic
SS Interceptor
Grease Removal Device
Monitoring Device for
Interceptors Inside Building
Monitoring Device for
Interceptors Outside Building
Sensing & Alarm Probe
Page 219
Page 211
Page 220
Page 220
Page 217
208
Interceptors_08.qxd
3/27/08
11:58 AM
Page 209
INTERCEPTORS • Pictorial Selection Guide
OIL SEPARATORS
60500B
60500B-EXT
60500-EST
Gravity-Type Draw-Off
Extended Top, Draw-Off Type
with External Storage Tank
Page 225
Page 225
Page 226
60610A
60610A-EXT
60610-EST
High Volume, Draw-Off Type
High Volume, Extended Top, Draw-Off Type High Volume with External Storage Tank
Page 227
Page 227
OIL SEPARATORS
INTERCEPTORS
Page 228 (EST NOT SHOWN)
SOLIDS INTERCEPTORS
61000
61030
61040A
61070
Barber Shop Type, Bottom Access
Jewelry Shop Type, Top Access
18" x 18" Top Access
10-1/2" Top
61080
16-1/2” Top
Top Access
Page 229
Page 229
OIL/SEDIMENT
LINT INTERCEPTOR
60810
61800
Page 230
Pages 230, 231
Galvanized Steel Bucket
Page 229
Page 232
209
Interceptors_08.qxd
3/27/08
11:58 AM
Page 210
GREASE INTERCEPTORS
Typical Installations
INTERCEPTORS
The typical illustrations shown below are suggested ways of installing various types of JOSAM Interceptors. All installations are subject to
government and local code requirements.
60100H Series Interceptor on floor, servicing a sink.
60110-SA Series Semi-Automatic shallow Interceptor installed on
floor, servicing a double compartment sink and dishwasher.
60100-SA-RT Series Semi-Automatic Interceptor recessed flush with
floor, servicing a dishwasher.
60210A-EXT Series Interceptor recessed flush with floor, servicing a
sink and an additional fixture.
60115A Series Interceptor installed on floor under sink.
(Recommended only if there is adequate head room for cover
removal and service.)
60100H-EXT Series Interceptor recessed with deep roughing
extended flush with floor.
NOTE: Install air intake from flow control to outside of building and terminate with elbow, turned down or intersect a local vent or vent stack without trap if permitted
by code. Top of air intake from flow control should not be lower than rim of fixture.
210
Interceptors_08.qxd
5/2/08
3:02 PM
Page 211
GREASE INTERCEPTORS
60100H SERIES
MANUAL CLEANING, ON-FLOOR TYPE
APPLICATION
For use in restaurant and institutional kitchens and all types of food handling and
processing areas where waste water contains fats, oil and grease (FOG). Adequate
space and head room for removal of cover must be available for manual cleaning.
SPECIFICATION
JOSAM 60100H Series epoxy coated fabricated steel Grease Interceptor, no-hub connections, internal trap, removable diffuser baffle, gasketed non-skid cover, flow control fitting
and PDI Seal of Approval. Conforms to Plumbing & Drainage Institute Standard PDI-G101.
Conforms to Plumbing and Drainage Institute Standard PDI-G101.
Available Options
▼ -RT
▼ -ET
-HD
Heavy-Duty Cover
-SS
Stainless Steel Interceptor
▼ -GRD* Grease Removal Device,
60104H-60110H
† -GRDP Grease Recovery Device
with Probe
-SAP Sensing and Alarm Probe
Cover Recess for Floor Finish
Flange and Clamp Device
Integrated Solids Interceptor
Extension, 6” Standard.
(Specify Extension Height)
Recessed Type
Enclosed Type
INTERCEPTORS
-40
-61
* -ISI
▼ -EXT
* -ISI and -GRD cannot be furnished together. † 60100H-GRDP meets ANSI A112.14.4
TYPE
NO.
60102H
60103H
60104H
60105H
60106H
60107H
60108H
60109H
60110H
FLOW
RATE
GPM
7
10
15
20
25
35
50
75
100
GREASE
CAP
LBS.
14
20
30
40
50
70
100
150
200
PIPE
SIZE
2
2
2
3
3
3
3
3
4
ROUGH-IN
CENTERS
C
D
8-1/4
3-3/8
8-1/2
3-3/8
9-1/2
3-3/8
12
4-7/8
13
4-7/8
14-1/2
4-7/8
16-1/2
4-7/8
21
6
23
8
LGTH.
E
14-7/8
16-5/8
20-3/8
20-7/8
23-3/8
26-1/8
27-7/8
41
47
WIDTH
F
13
14-1/2
17
19
21-1/2
23
25-1/2
31
35
HGT.
G
11-5/8
11-7/8
12-7/8
16-7/8
17-7/8
19-3/8
21-3/8
27
31
LBS.
35
45
60
70
90
110
135
220
325
60100H-GRD SERIES
with Grease Removal Device
APPLICATION
For use in restaurant and institutional kitchens and all types of food handling and
processing areas where waste water contains fats, oil and grease (FOG). The Grease
Removal Device (GRD), with programmable timer, controls the internal pump to
remove grease on schedule.
SPECIFICATION
JOSAM 60100H-GRD Series epoxy coated fabricated steel Grease Interceptor, no-hub
connections, internal trap, removable baffle, gasketed non-skid cover, flow control fitting and PDI Seal of Approval. Programmable timer controls internal pump for
removal of grease at predetermined intervals.
OPTION N/A:
-ISI
TYPE
NO.
60104H-GRD
60105H-GRD
60106H-GRD
60107H-GRD
60108H-GRD
60109H-GRD
60110H-GRD
FLOW GREASE
RATE
CAP
GPM
LBS.
15
30
20
40
25
50
35
70
50
100
75
150
100
200
PIPE
SIZE
2
3
3
3
3
3
4
ROUGH-IN
CENTERS
C
D
9-1/2
12
13
14-1/2
16-1/2
21
23
3-3/8
4-7/8
4-7/8
4-7/8
4-7/8
6
8
LGTH.
E
20-3/8
20-7/8
23-3/8
26-1/8
27-7/8
41
47
WIDTH
F
17
19
21-1/2
23
25-1/2
31
35
HGT.
G
12-7/8
16-7/8
17-7/8
19-3/8
21-3/8
27
31
LBS.
90
100
120
140
165
250
355
▼ Product Illustration follows.
211
Interceptors_08.qxd
5/2/08
3:02 PM
Page 212
GREASE INTERCEPTORS
60100H-EXT SERIES
with Extension
APPLICATION
For use in restaurant and institutional kitchens and all types of food handling and
processing areas where waste water contains fats, oil and grease (FOG). Extended
top with fixed extension for installations requiring additional roughing depth from
the cover of the interceptor to the inlet and outlet.
SPECIFICATION
JOSAM 60100H-EXT Series epoxy coated fabricated steel Grease Interceptor, deep
roughing, integral extension, flush-with-floor type, no-hub connections, internal trap,
removable diffuser baffle, gasketed non-skid cover, flow control fitting and PDI Seal
of Approval.
INTERCEPTORS
Conforms to Plumbing and Drainage Institute Standard PDI-G101.
ROUGH-IN
CENTERS
D♦
C
FLOW GREASE
CAP
PIPE
RATE
LBS.
SIZE
GPM
TYPE
NO.
60102H-EXT
60103H-EXT
60104H-EXT
60105H-EXT
60106H-EXT
60107H-EXT
60108H-EXT
60109H-EXT
60110H-EXT
7
10
15
20
25
35
50
75
100
14
20
30
40
50
70
100
150
200
2
2
2
3
3
3
3
3
4
8-1/4
8-1/2
9-1/2
12
13
14-1/2
16-1/2
21
23
9-3/8
9-3/8
9-3/8
10-7/8
10-7/8
10-7/8
10-7/8
12
14
LGTH. WIDTH HGT.
E
F
G
14-7/8
16-5/8
20-3/8
20-7/8
23-3/8
26-1/8
27-7/8
41
47
13
14-1/2
17
19
21-1/2
23
25-1/2
31
35
17-5/8
17-7/8
18-7/8
22-7/8
23-7/8
25-3/8
27-3/8
33
37
LBS.
35
45
60
70
90
110
135
220
325
♦
60100H-ET SERIES
DIMENSIONS BASED ON STD. 6" EXTENSION.
Enclosed Type
APPLICATION
For use in restaurant and institutional kitchens and all types of food handling and
processing areas where waste water contains fats, oil and grease (FOG). Steel enclosure cabinet for installation flush with the floor, completely encased, where adjustment of interceptor elevation is necessary for connection to a deep drain line.
SPECIFICATION
JOSAM 60100H-ET Series epoxy coated fabricated steel Grease Interceptor, deep
roughing, flush-with-floor type, no-hub connections, internal trap, removable diffuser
baffle, gasketed non-skid cover, flow control fitting, PDI Seal of Approval and steel
enclosure cabinet with non-skid cover and adjustable interceptor carrier brackets.
Conforms to Plumbing and Drainage Institute Standard PDI-G101.
TYPE
NO.
60102H-ET
60103H-ET
60104H-ET
60105H-ET
60106H-ET
60107H-ET
60108H-ET
60109H-ET
60110H-ET
212
ROUGH-IN INTER. ENCL.
FLOW GREASE
RATE CAP PIPE WIDTH CENTERS LGTH. LGTH. HGT.
D♦
C
F
G
LBS.
E
B
GPM LBS. SIZE
7
10
15
20
25
35
50
75
100
14
20
30
40
50
70
100
150
200
2
2
2
3
3
3
3
3
4
15
16-1/2
19
21
23-1/2
25
27-1/2
33
37
8-1/4
8-1/2
9-1/2
12
13
14-1/2
16-1/2
21
23
8-3/4
8-3/4
8-3/4
10-1/4
10-1/4
10-1/4
10-1/4
11-3/8
13-3/8
14-7/8
16-5/8
20-3/8
20-7/8
23-3/8
26-1/8
27-7/8
41
47
23
24-3/4
28-1/2
29
31-1/2
34-1/4
36
49-1/8
55-1/8
25-3/4
26
27
31
32
33-1/2
35-1/2
41-1/8
45-1/8
143
185
232
274
356
378
435
780
1075
♦
BASED ON INTERCEPTOR IN POSITION #1, ADD 1-1/4" WHEN LOWERING INTERCEPTOR
TO SUCCEEDING POSITIONS.
INTERCEPTOR SUPPORT BRACKET ADJUSTABLE FOR VARYING DEPTHS OF FLOOR
CONSTRUCTION.
Interceptors_08.qxd
5/2/08
4:26 PM
Page 213
GREASE INTERCEPTORS
60100H-RT SERIES
Recessed Type
APPLICATION
For use in restaurant and institutional kitchens and all types of food handling and
processing areas where waste water contains fats, oil and grease (FOG). Steel frame
and cover for installation flush with the floor where adjustment of interceptor elevation is necessary for connection to a deep drain line.
SPECIFICATION
JOSAM 60100H-RT Series epoxy coated fabricated steel Grease Interceptor, deep
roughing, recessed, flush-with-floor type, no-hub connections, internal trap, removable
diffuser baffle, gasketed non-skid cover, flow control fitting, PDI Seal of Approval and
steel frame with non-skid cover and adjustable interceptor carrier brackets.
Conforms to Plumbing and Drainage Institute Standard PDI-G101.
60102H-RT
60103H-RT
60104H-RT
60105H-RT
60106H-RT
60107H-RT
60108H-RT
60109H-RT
60110H-RT
INTERCEPTORS
TYPE
NO.
ROUGH-IN INTER. ENCL.
FLOW GREASE
RATE CAP PIPE WIDTH CENTERS LGTH. LGTH. HGT.
D♦
C
GPM LBS. SIZE
B
E
F
G
LBS.
7
10
15
20
25
35
50
75
100
14
20
30
40
50
70
100
150
200
2
2
2
3
3
3
3
3
4
15
16-3/8
18-1/2
20-1/4
22-1/2
24
26-5/8
33
37
8-1/4
8-1/2
9-1/2
12
13
14-1/2
16-1/2
21
23
8-3/4
8-3/4
8-3/4
10-1/4
10-1/4
10-1/4
10-1/4
11-3/8
13-3/8
14-7/8
16-5/8
20-3/8
20-7/8
23-3/8
26-1/8
27-7/8
41
47
19
21
24
26
29
31
33
49-1/8
55-1/8
14-3/4
14-3/4
14-3/4
14-3/4
14-7/8
14-7/8
14-7/8
15-3/4
15-3/4
102
120
151
175
197
225
258
455
625
♦
BASED ON INTERCEPTOR IN POSITION #1, ADD 1-1/4" WHEN LOWERING INTERCEPTOR
TO SUCCEEDING POSITIONS.
INTERCEPTOR SUPPORT BRACKET ADJUSTABLE FOR VARYING DEPTHS OF FLOOR
CONSTRUCTION.
213
Interceptors_08.qxd
5/2/08
3:02 PM
Page 214
GREASE INTERCEPTORS
60100-SA SERIES
SEMI-AUTOMATIC
APPLICATION
For use in restaurant and institutional kitchens and all types of food handling and
processing areas where waste water contains fats, oil and grease (FOG). Semi-automatic draw-off allows for easy odor and mess free grease removal without opening
the cover.
SPECIFICATION
JOSAM 60100-SA Series epoxy coated fabricated steel Grease Interceptor with
threaded connections, internal air relief, visible double wall trap, removable baffle,
gasketed non-skid cover, grease recovery cone, flexible hose, grease draw-off valve
and flow control fitting.
INTERCEPTORS
Available Options
• -62 4” Inlet and Outlet Available
on Std. 3” Sizes
-65 Hub Inlet, Spigot Outlet, 2”
-66 Hub Inlet, Spigot Outlet, 3”
-67 Hub Inlet, Spigot Outlet, 4”
▼ -ET Enclosed Type
▼ -RT Recessed Type
• 3” sizes normally furnished with 4” x 3” reducing bushings.
TYPE
NO.
60102-SA
60103-SA
60104-SA
60105-SA
60106-SA
60107-SA
60108-SA
214
FLOW GREASE
RATE
CAP
PIPE
GPM
LBS.
SIZE
7
10
15
20
25
35
50
14
20
30
40
50
70
100
2
2
2
2
3•
3•
3•
ROUGH-IN
CENTERS
C
D
7-3/8
8-3/8
9-3/8
11-1/2
13
14-1/2
15-1/2
2-1/4
2-7/8
4
4-5/8
4-3/8
4
4-7/8
LGTH. WIDTH HGT.
E
F
G
20-7/16
22-1/16
24-3/16
26-15/16
32
33-5/8
37-1/4
9-15/16
11-9/16
13-3/16
14-13/16
16-7/8
17-7/8
19-3/4
9-5/8
11-1/4
13-3/8
16-1/8
17-3/8
18-1/2
20-3/8
LBS.
31
40
47
88
123
127
197
NOTE: HGT. OF 13" REQUIRED FROM TOP OF INTERCEPTOR TO BOTTOM OF FIXTURE.
▼ Product Illustration follows.
Interceptors_08.qxd
5/2/08
3:02 PM
Page 215
GREASE INTERCEPTORS
60100-SA-ET SERIES
Enclosed Type
APPLICATION
For use in restaurant and institutional kitchens and all types of food handling and
processing areas where waste water contains fats, oil and grease (FOG). Semi-automatic draw-off allows for easy odor and mess free grease removal without opening
the cover. Steel enclosure cabinet for installation flush with the floor, completely
encased, where adjustment of interceptor elevation is necessary for connection to a
deep drain line.
SPECIFICATION
JOSAM 60100-SA-ET Series epoxy coated fabricated steel semi-automatic Grease
Interceptor with threaded connections, internal air relief, visible double wall trap,
removable baffle, gasketed cover, grease recovery cone, flexible hose and grease
draw-off valve, flow control fitting and steel enclosure cabinet with non-skid cover
and adjustable interceptor carrier brackets.
60102-SA-ET
60103-SA-ET
60104-SA-ET
60105-SA-ET
60106-SA-ET
60107-SA-ET
60108-SA-ET
ROUGH-IN
FLOW GREASE
RATE CAP PIPE WIDTH CENTERS
D♦
C
GPM LBS. SIZE
B
7
10
15
20
25
35
50
14
20
30
40
50
70
100
2
2
2
2
3•
3•
3•
11
7-3/8 7-5/8
12-5/8 8-3/8 8-1/4
14-1/4 9-3/8 9-3/8
16
11-1/2
10
17-1/2
13
9-3/4
18-1/2 14-1/2 9-3/8
20-1/4 15-1/2 10-1/4
INTERCEPTORS
TYPE
NO.
E
20-7/16
22-1/16
24-3/16
26-15/16
32
33-5/8
37-1/4
LGTH. HGT.
F
G
LBS.
27-1/2
29
31-1/4
34
38
39-1/2
43-1/8
24-5/8
25-7/8
27-1/8
29-1/8
31-1/2
32-5/8
34-5/8
136
177
216
289
360
389
491
NOTE: HGT. OF 13" REQUIRED FROM TOP OF INTERCEPTOR TO BOTTOM OF FIXTURE.
♦
60100-SA-RT SERIES
BASED ON INTERCEPTOR IN POSITION #1, ADD 1-1/4" WHEN
LOWERING INTERCEPTOR TO SUCCEEDING POSITIONS.
INTERCEPTOR SUPPORT BRACKET ADJUSTABLE FOR VARYING DEPTHS
OF FLOOR CONSTRUCTION.
Recessed Type
APPLICATION
For use in restaurant and institutional kitchens and all types of food handling and
processing areas where waste water contains fats, oil and grease (FOG). Semi-automatic
draw-off allows for easy odor and mess free grease removal without opening the cover.
Steel frame and cover for installation flush with the floor where adjustment of interceptor elevation is necessary for connection to deep drain line.
SPECIFICATION
JOSAM 60100-SA-RT Series epoxy coated fabricated steel semi-automatic Grease
Interceptor with acid-resisting coating, deep roughing flush-with-floor type, threaded
connections, flat bottom, internal air relief, visible double wall trap, removable baffle, gasketed non-skid cover, grease recovery cone, flexible hose and grease draw-off
valve, flow control fitting and steel frame with non-skid cover and adjustable interceptor carrier brackets.
TYPE
NO.
60102-SA-RT
60103-SA-RT
60104-SA-RT
60105-SA-RT
60106-SA-RT
60107-SA-RT
60108-SA-RT
ROUGH-IN
FLOW GREASE
RATE CAP PIPE WIDTH CENTERS
D♦
C
B
GPM LBS. SIZE
7
10
15
20
25
35
50
14
20
30
40
50
70
100
2
2
2
2
3•
3•
3•
11
7-3/8 7-5/8
12-5/8 8-3/8 8-1/4
14-1/4 9-3/8 9-3/8
16
11-1/2
10
17-1/2
13
9-3/4
18-1/2 14-1/2 9-3/8
20-1/4 15-1/2 10-1/4
E
20-7/16
22-1/16
24-3/16
26-15/16
32
33-5/8
37-1/4
LGTH. HGT.
F
G
LBS.
27-1/2
29
31-1/4
34
38
39-1/2
43-1/8
14-3/4
14-3/4
14-3/4
14-3/4
14-3/4
14-7/8
14-7/8
127
144
159
208
255
260
338
NOTE: HGT. OF 13" REQUIRED FROM TOP OF INTERCEPTOR TO BOTTOM OF FIXTURE.
♦
BASED ON INTERCEPTOR IN POSITION #1, ADD 1-1/4" WHEN
LOWERING INTERCEPTOR TO SUCCEEDING POSITIONS.
INTERCEPTOR SUPPORT BRACKET ADJUSTABLE FOR VARYING DEPTHS
OF FLOOR CONSTRUCTION.
215
Interceptors_08.qxd
5/2/08
3:02 PM
Page 216
GREASE INTERCEPTORS
60115A/60117A SERIES
MANUAL CLEANING, LOW TYPE
APPLICATION
For use in restaurant and institutional kitchens and all types of food handling and
processing areas where waste water contains fats, oil and grease (FOG). Adequate
space and head room for removal of cover must be available for manual cleaning.
Low profile interceptor designed to fit on the floor under equipment in a limited space.
SPECIFICATION
JOSAM 60115A/60117A Series epoxy coated fabricated steel Grease Interceptor,
shallow on-floor type, threaded connections, internal air relief, visible double wall
trap, removable baffle, gasketed non-skid cover and flow control fitting.
Available Options
INTERCEPTORS
-65 Hub Inlet, Spigot Outlet, 2”
-66 Hub Inlet, Spigot Outlet, 3”
• -68 3” Inlet and Outlet Available on Standard 2” Size
2" sizes normally furnished with 3" x 2" reducing bushings.
•
TYPE
NO.
FLOW GREASE
RATE CAP.
PIPE
GPM
LBS.
SIZE
D
E
F
G
H
LBS.
60115A
20
40
2•
3-1/2
36-3/8
22-5/8
10-1/2
31-5/8
109
60117A
35
70
3
4-1/2
47-3/4
28-5/8
11-1/2
42-5/8
165
60115-SA SERIES
SEMI-AUTOMATIC, LOW TYPE
APPLICATION
For use in restaurant and institutional kitchens and all types of food handling and processing areas where waste water contains fats, oil and grease (FOG). Semi-automatic
draw-off allows for easy odor and mess free grease removal without opening the cover.
Low profile interceptor designed to fit on the floor under equipment in a limited space.
SPECIFICATION
JOSAM 60115-SA Series epoxy coated fabricated steel Grease Interceptor, shallow onfloor type, threaded connections, internal air relief, visible double wall trap, removable
baffle, gasketed non-skid cover, grease recovery cone, flexible hose, grease draw-off
valve and flow control fitting.
Available Options
-65 Hub Inlet, Spigot Outlet, 2”
-66 Hub Inlet, Spigot Outlet, 3”
TYPE NO.
60115-SA
216
FLOW RATE GPM
35
GREASE CAPACITY LBS.
70
LBS.
124
NOTE: HGT. OF 8-1/2" REQUIRED FROM TOP OF INTERCEPTOR TO BOTTOM OF FIXTURE.
Interceptors_08.qxd
3/27/08
11:58 AM
Page 217
GREASE INTERCEPTORS
60210A SERIES
MANUAL CLEANING TYPE
APPLICATION
For use in restaurant and institutional kitchens and all types of food handling and
processing areas where waste water contains fats, oil and grease (FOG).
SPECIFICATION
JOSAM 60210A Series epoxy coated fabricated steel Grease Interceptor, high volume,
threaded connections, internal air relief, visible double wall trap, removable baffle,
gasketed non-skid cover and flow control fitting.
Available Options
TYPE
NO.
60213A
60214A
60215A
60216A
60217A
Extension, 6” Standard. (Specify Extension Height)
Anchor Flange
Flange and Clamp Device
Integrated Solids Interceptor
Heavy-Duty Cover
Sensing and Alarm Probe
INTERCEPTORS
▼ -EXT
-60
-61
▼ -ISI
-HD
-SAP
ROUGH-IN
FLOW GREASE
RATE
CAP
PIPE CENTERS LGTH. WIDTH HGT. COVER
D
GPM
LBS.
SIZE C
E
F
G
H
LBS.
150
200
250
350
500
300
400
500
700
1000
4
5
5
6
6
27
31-1/2
35-1/2
39-1/2
43-1/2
8
10
10
12
12
60
67
72
80
91
39
42
46
52
59
35
41-1/2
45-1/2
51-1/2
55-1/2
53
58
63
71
82
725
1150
1425
1800
2300
60210A-SAP SERIES
*
60213A FURNISHED WITH ONE-PIECE COVER.
with Wireless Sensing and Alarm Probe
APPLICATION
For use in restaurant and institutional kitchens and all types of food handling and
processing areas where waste water contains fats, oil and grease (FOG). Will monitor
and alarm facility personnel when interceptor cleaning is required.
SPECIFICATION
JOSAM 60210A-SAP Series epoxy coated fabricated steel Grease Interceptor, high volume, threaded connections, internal air relief, visible double wall trap, removable baffle, gasketed non-skid cover, flow control fitting and factory installed wireless Sensing
and Alarm Probe (SAP) assembly. Wall-mounted controller is battery powered by a UL
listed 9VDC transformer and has L.E.D. indicators with audible alarm and permanent
memory. Probe assembly is mounted to a bracket for precise placement ensuring accurate and reliable readings and transmits to controller via a wireless signal.
TYPE
NO.
60213A-SAP
60214A-SAP
60215A-SAP
60216A-SAP
60217A-SAP
ROUGH-IN
FLOW GREASE
RATE CAP PIPE CENTERS LGTH. WIDTH HGT. COVER
D
GPM
LBS. SIZE C
E
F
G
H
LBS.
150
200
250
350
500
300
400
500
700
1000
4
5
5
6
6
27
31-1/2
35-1/2
39-1/2
43-1/2
8
10
10
12
12
60
67
72
80
91
39
42
46
52
59
35
41-1/2
45-1/2
51-1/2
55-1/2
53
58
63
71
82
727
1152
1427
1802
2302
*
60213A-SAP FURNISHED WITH ONE-PIECE COVER.
▼ Product Illustration follows.
217
Interceptors_08.qxd
3/27/08
11:58 AM
Page 218
GREASE INTERCEPTORS
60210A-EXT SERIES
with Extension
APPLICATION
For use in large restaurant and institutional kitchens and all types of food handling
and processing areas where waste water contains large amounts of fats, oil and
grease (FOG). Extended top with fixed extension for installations requiring additional
roughing depth from the cover of the interceptor to the inlet and outlet.
SPECIFICATION
INTERCEPTORS
JOSAM 60210A-EXT Series epoxy coated fabricated steel Grease Interceptor, high volume,
deep roughing, integral extension, threaded connections, internal air relief, visible double
wall trap, removable baffle, gasketed non-skid cover and flow control fitting.
TYPE
NO.
60213A-EXT
60214A-EXT
60215A-EXT
60216A-EXT
60217A-EXT
ROUGH-IN
FLOW GREASE
RATE CAP PIPE CENTERS LGTH. WIDTH HGT. COVER
D♦
H
LBS.
GPM
LBS. SIZE C
E
F
G♦
150
200
250
350
500
300
400
500
700
1000
4
5
5
6
6
27
31-1/2
35-1/2
39-1/2
43-1/2
14
16
16
18
18
60
67
72
80
91
39
42
46
52
59
41
47-1/2
51-1/2
57-1/2
61-1/2
53
58
63
71
82
935
1150
1425
1800
2300
♦
DIMENSIONS BASED ON STD. 6" EXTENSION
*
60213A-EXT FURNISHED WITH ONE-PIECE COVER.
60210A-ISI SERIES
with Integrated Solids Interceptor
APPLICATION
For use in large restaurant and institutional kitchens and all types of food handling
and processing areas where waste water contains large amounts of fats, oil and
grease (FOG).
SPECIFICATION
JOSAM 60210A-ISI Series epoxy coated fabricated steel Grease Interceptor, high volume,
threaded connections, internal air relief, visible double wall trap, integrated solids interceptor, gasketed non-skid cover and flow control fitting.
TYPE
NO.
60213A-ISI
60214A-ISI
60215A-ISI
60216A-ISI
60217A-ISI
218
ROUGH-IN
FLOW GREASE
RATE CAP PIPE CENTERS LGTH. WIDTH HGT. COVER
D
GPM
LBS. SIZE C
E
F
G
H
LBS.
150
200
250
350
500
300
400
500
700
1000
4
5
5
6
6
27
31-1/2
35-1/2
39-1/2
43-1/2
8
10
10
12
12
60
67
72
80
91
39
42
46
52
59
35
41-1/2
45-1/2
51-1/2
55-1/2
53
58
63
71
82
975
1200
1475
1850
2400
*
60213A-ISI FURNISHED WITH ONE-PIECE COVER.
Interceptors_08.qxd
5/2/08
3:02 PM
Page 219
GREASE INTERCEPTORS
60300A SERIES
GI 2000A AUTOMATIC GREASE RECOVERY DEVICE
APPLICATION
For use in restaurant and institutional kitchens and all types of food handling and
processing areas where waste water contains, fats, oil and grease (FOG).
SPECIFICATION
JOSAM 60300A Series fully automatic Grease Recovery Device (GRD) is constructed of 304
grade stainless steel with supplemental solids interceptor, removable basket, stainless steel
draw latches, non-adhesive “U” channel gasket, 55 gallon polypropylene reclaim tank with
alarm and pump, may be floor mounted, partially recessed, or below grade in vaulted
enclosure and is capable of measuring grease, heating congealed grease, and transferring
grease via pump to a remote reclaim tank. The data is then sent to a Nema encased controller with an LCD display and LED indicators to provide current system status. The microprocessor records and displays clean cycles on a daily, weekly, monthly and yearly basis.
Available Options
TYPE
NO.
60306A
60307A
60308A
60309A
60310A•
60311A•
60312A•
60313A•
60314A•
60315A**
FLOW GREASE
RATE CAP PIPE
GPM LBS. SIZE
25
35
50
75
100
150
200
250
350
500
50
70
100
150
200
300
400
500
700
1000
3
3
3
4
4
4
6
6
6
6
INTERCEPTORS
-23 Remote Monitoring Package
(-23 A) Monitoring Plan
(-23 B) Monitoring Plan
(-23 C) Monitoring Plan
-24 Extended Warranty Package
-33 55-Gallon Stainless Steel Reclaim Tank
-34 55-Gallon Steel Reclaim Tank
A
B
C
D
24-3/8
24-3/8
25-7/8
25-7/8
35
39
43
47
47
47
9
9
9
9
9
9
9
9
9
9
3-1/2
3-1/2
3-1/2
3-1/2
3-1/2
3-1/2
3-1/2
3-1/2
3-1/2
3-1/2
16
20
22-1/2
26
31
35
41
44-3/4
48
51
E
F
G
LBS.
35-1/2 25-5/8 11
220
40-5/8 31-1/2 15-1/2 340
42-3/8
33 17-1/2 425
56-1/8 46-3/4 21-1/2 700
67-1/2
58
23
800
73-3/4
64
27
1100
80-3/4
71 31-1/2 1250
85-3/4
76 35-1/2 1400
105-1/2 96 39-1/2 1525
130-7/8 120
44
1650
55-GAL. RECLAIM TANK NOT SHOWN
* RECOMMENDED CLEARANCES
• INCLUDES EXTERNAL MACERATING PUMP
** UTILIZES TWO PUMPS & RECLAIM TANKS
219
Interceptors_08.qxd
5/2/08
3:02 PM
Page 220
GREASE INTERCEPTORS
EGOLD-1000 SERIES
ELECTRONIC GREASE/OIL LEVEL DETECTOR
APPLICATION
For use in restaurant and institutional kitchens and all types of food handling and processing areas where waste water contains fats, oil and grease (FOG). Additionally, can
be used in service stations, parking garages, car and truck washes and industrial plants
where discharge water contains oil. Can be used on most manufacturers’ manual or
semi-automatic grease and oil interceptors to monitor and alert facility personnel
when interceptor cleaning is required.
SPECIFICATION
JOSAM EGOLD-1000 Series Electronic Grease/Oil Level Detector with wall-mounted
controller, is powered by a UL listed 9 VDC transformer and has L.E.D. indicators with
audible alarm and permanent memory. The probe assembly is mounted to a bracket
for precise placement ensuring accurate and reliable readings.
INTERCEPTORS
Available Options
-23 Remote Monitoring Package
(-23 A) Monitoring Plan
(-23 B) Monitoring Plan
(-23 C) Monitoring Plan
DISTANCE FROM BOTTOM OF
INTERCEPTOR TO TOP OF OUTLET
RECOMMENDED PROBE ASSEMBLY
12”-18”
MA62-10
19”-24”
MA62-12
25”-36”
MA62-16
37”-and up
MA62-21
CEGOLD-2000 SERIES
INTERCEPTOR BY JOSAM OR OTHERS
PIT ELECTRONIC GREASE/OIL LEVEL DETECTOR
APPLICATION
For use in restaurant and institutional kitchens and all types of food handling and
processing areas where waste water contains fats, oil and grease (FOG). Additionally, can
be used in service stations, parking garages, car and truck washes and industrial plants
where discharge water contains oil and is intended to be installed in outdoor pre-cast
interceptors to monitor and alert facility personnel when interceptor pumping is required.
SPECIFICATION
JOSAM CEGOLD-2000 Series Electronic Grease/Oil Level Detector with wall-mounted
controller, is powered by a UL listed 9 VDC transformer and has L.E.D. indicators with
audible alarm and permanent memory. The telescoping stainless steel probe assembly
is mounted with brackets on side of interceptor to ensure ease of installation and
removal for maintenance.
Available Options
-23 Remote Monitoring Package
(-23 A) Monitoring Plan
(-23 B) Monitoring Plan
(-23 C) Monitoring Plan
DISTANCE FROM GRADE TO
STATIC WATER LINE ■
RECOMMENDED PROBE ASSEMBLY
22”-48”
CO37-04
49”-72”
CO37-06
73”-96”
CO37-08
97”-120”
CO37-10
■ Longer lengths available on request.
■ When ordering specify distance from grade
to static water line.
220
CONCRETE PIT BY OTHERS
Interceptors_08.qxd
3/27/08
11:58 AM
Page 221
FLOW CONTROL FITTINGS
Essential to Achieving Maximum Efficiency
Flow control fittings are furnished at no extra cost with all JOSAM Interceptors and Separators. These devices govern flow rate to the
interceptor or separator being used, thereby assuring the maximum retention of the material being intercepted.
One of the flow control fittings illustrated on this page will be shipped with
every JOSAM Grease Interceptor or Oil Separator. They were designed after
many years of tests and field experiments with interceptor installations under
varying conditions and ensure 90% or more grease or oil retention efficiency
of the interceptor.
INTERCEPTORS
When consideration isn’t given to the flow rate of the waste water to be handled, generally the actual flow rate through the interceptor or separator
exceeds its rated maximum. With such flow rate, the interceptor or separator
would be overloaded. Retention time within the unit would not be sufficient
for maximum separation. The result would be low efficiency and pollutants
left in the waste water would pass through the interceptor or separator making the installation less than effective. When the flow is controlled by use of a
JOSAM flow control fitting so that it can never exceed the maximum rating of
the interceptor or separator, and the unit is cleaned on a regular basis, the
maximum pollutant retention efficiency will be achieved and maintained.
Two Bronze Plugs Furnished for unused
Inlet & Outlet to serve as Cleanouts
60710 TYPE
All flow controls are provided with an air intake and should be connected to
vent stack or vent not lower than the flow level of highest drain serviced or
terminated in a return bend at the same elevation outside of building.
60732 TYPE
Interceptor/Separator–Flow Control
This table indicates which series flow control is furnished with the JOSAM
interceptors or separators shown.
FLOW CONTROLS
Series
60100-SA
60110-SA
60100-SA-RT
60100-SA-ET
60100H
Flow Control
Series
60730
60730
60730
60730
60740
Series
60110A
60100H-EXT
60100H-RT
60100H-ET
60210A-EXT*
Flow Control
Series
60730
60740
60740
60740
60710
Series
60210A*
60500B
60500B-EXT
60610-EXT*
60610A*
Flow Control
Series
60710
60740
60740
60710
60710
60733 & 60734 TYPE
* All interceptors or separators in this series with a flow rate of 150 G.P.M. or less are shipped with a 60733 & 60734
Type Flow Control.
DIMENSIONS IN INCHES
Type
60712
60713
60714
60715
60716
A
2
3
4
5
6
B
1-1/4
1-1/2
2-1/2
2-1/2
3
C
2-1/2
3
3-3/4
3-3/4
4-3/8
D
2
2-7/8
4-1/8
4-1/8
5-1/8
E
1-1/8
1-3/8
1-7/8
1-7/8
2-1/8
F
2
2-3/4
4-1/4
4-1/4
4-3/4
G
3-1/4
4-1/8
6-1/2
6-1/2
7-7/8
H
J
K
3-3/8 6-1/2
3
4-1/2 8-5/8 4-1/4
6-7/8
12
6-7/8
6-7/8
12
6-7/8
8
14-1/4
8
LBS.
7
14
52
54
85
60742
60743
A
2-3/8
3-3/8
B
2
2-1/2
60742 & 60743 TYPE
221
Interceptors_08.qxd
3/27/08
11:58 AM
Page 222
OIL SEPARATORS
Features
AN IMPORTANT STEP IN PREVENTING POLLUTION FOR COMMERCIAL AND INDUSTRIAL SERVICE
JOSAM Oil Separators solve the majority of oil and hazardous waste interception and handling problems at the source. Years of research, experimentation and actual field experience
have been applied by JOSAM to the design and development of the oil separators covered in this section. The paramount objective of an oil separator is to intercept and separate oils
from wastewater, and after this has been accomplished, to provide an efficient means of directing the intercepted materials to storage and disposal facilities. JOSAM Oil Separators do
just that with 90% plus retention efficiency. Features of the 60500B and 60610A Series are covered below. The same features with the addition of extended tops are available with
the -EXT option.
SECURED COVER
INTERCEPTORS
White epoxy coating, gasketed air and
watertight bolted non-skid safety pattern top.
Suitable as floor plate when set flush with floor.
BODY
60500B Series Shown
AIR INTAKE OR VENT
Steel with white epoxy coating
inside and outside.
INLET
OUTLET
FLOW CONTROL
Maximum oil separation efficiency
depends upon the proper rate of flow
through the separator. The flow control
regulates flow velocity to prevent taxing
the separator beyond its rated capacity
and ensures 90% or more retention efficiency. A flow control fitting is furnished
with each JOSAM Oil Separator and must
be used as directed.
INTERNAL TRAP LEG
(not shown)
Internal Trap Leg reduces installation
space requirements and allows
cleanout access through the removal
of the cover
SEDIMENT BUCKET (not shown)
Removable, galvanized steel with
perforated outlet weir to trap solids
and permit liquid passage. All waste
material entering separator must pass
through bucket where solids and
sediment are retained for removal.
VENT CONNECTION
Vent connection to accommodate
atmospheric circulation.
GRAVITY DRAW-OFF
Adjustable skimmer tube with lock nut and packing, when set for operation,
provides continuous draw-off of separated oil to storage tank. Draw-off and
oil drain line can be connected to either side of separator.
JOSAM Oil Separators are produced in steel to rigid specifications with strict quality control.
222
Interceptors_08.qxd
3/27/08
11:58 AM
Page 223
OIL SEPARATORS
Sizing and Selection
OIL SEPARATOR SELECTION TABLE
Inlet &
Outlet Size
(Inches)
The selection of an oil separator depends on the specific
features desired and the size of separator required. The size
of separator required is based on the peak waste water flow
that can be discharged from the fixtures and equipment to
be served.
60503B, 60503B-EXT, 60503-EST
10
2
60504B, 60504B-EXT, 60504-EST
15
2
60505B, 60505B-EXT, 60505-EST
20
3
60506B, 60506B-EXT, 60506-EST
25
3
The peak waste water flow to be handled by the proposed
piping system must be estimated in gallons per minute
(GPM). After the required flow has been determined, refer
to the Oil Separator Selection Table and compare the
required flow rate with the flow rates shown in the table.
60507B, 60507B-EXT, 60507-EST
35
3
60508B, 60508B-EXT, 60508-EST
50
3
60611A, 60611A-EXT, 60611-EST
75
3
60612A, 60612A-EXT, 60612-EST
100
4
60613A, 60613A-EXT, 60613-EST
150
4
60614A, 60614A-EXT, 60614-EST
200
5
60615A, 60615A-EXT, 60615-EST
250
5
60616A, 60616A-EXT, 60616-EST
350
6
EXAMPLE
60617A, 60617A-EXT, 60617-EST
500
6
The car wash piping system in a service station must
handle an estimated peak flow of 20 GPM. The Oil
Separator Selection Table shows that either the 60505B,
the 60505B-EXT or the 60505-EST Separator, all rated at
20 GPM, can fulfill this requirement. It is only necessary
to decide which of the three separators is best suited for
the proposed installation.
Consider an example for a more extensive piping system:
A processing operation has an estimated peak flow rate of
300 GPM. The Oil Separator Selection Table shows that
the 60616A, the 60616A-EXT or the 60616-EST Separator,
rated at 350 GPM, can handle the requirement. Sizing a
horizontal waste line depends on the specific pipe material
and the required pipe slope. The Horizontal Pipe Flow Table
indicates the approximate GPM flow rates at various slopes
that can be handled by cast iron or galvanized steel pipe.
Series
INTERCEPTORS
Flow
Rate
GPM
SIZING PROCEDURE
NOTE: Larger capacity separators can be fabricated in
accordance with specified requirements. Further information
is available from your local JOSAM Representative.
HORIZONTAL PIPE FLOW, GPM
Pipe Slope
(Inches per Foot)
Pipe Size
(Inches)
1/8
1/4
1/2
2
12
16
24
3
34
48
69
4
78
110
157
5
139
197
278
6
223
315
446
223
Interceptors_08.qxd
3/27/08
11:58 AM
Page 224
OIL SEPARATORS
Typical Installations
Installations and diagrams below show various components and suggested methods used when installing JOSAM Oil Separators.
All installations are subject to government and local code requirements.
GRAVITY DRAW-OFF
INTERCEPTORS
Every JOSAM Oil Separator is equipped with an internal
gravity draw-off assembly having an adjustable skimmer
tube and a threaded pipe connection through the side wall
of separator body. This assembly can be mounted on either
side to accommodate installation requirements. The piping
to oil storage tank is connected to the draw-off. Typical
installations are shown below.
SETTING THE GRAVITY DRAW-OFF TUBE
Gravity Draw-Off for Oil Separator
Typical arrangement of separator, draw-off piping, venting and
oil storage facility.
After separator is completely installed and ready for operation,
run clean water through the unit at the anticipated operational
flow rate and mark the operating water level. Set skimmer
tube with top 1/8" above operating water level. During normal
operation a film of oil will be on the water surface with all
excess oil skimmed and drawn-off to a storage facility. When
the tube is properly set water will not be drawn off with oil.
Oil separator recessed flush with floor, servicing a floor drain. Flow
control is installed with cleanouts to facilitate servicing.
Oil separator and flow control installed in pit, servicing a battery of floor drains.
224
Interceptors_08.qxd
5/2/08
4:26 PM
Page 225
OIL SEPARATORS
60500B SERIES
DRAW-OFF, GRAVITY TYPE
APPLICATION
For use in service stations, parking garages, car and truck washes and industrial
plants where discharged water contains oil, sediment and other volatile liquids.
Separator collects oil and conveniently permits the collected oil to be drained to a
storage tank by means of an adjustable gravity draw-off connection. Sediment and
debris are collected in a sediment bucket that can be periodically removed.
SPECIFICATION
JOSAM 60500B Series fabricated steel Oil Separator, epoxy coated inside and outside,
threaded connections, internal trap, sediment bucket, two vent connections on each
side, gasketed non-skid cover and flow control fitting.
Available Options
INTERCEPTORS
Extension, 6” Standard (Specify Extension Height)
Anchor Flange
Flange and Clamp Device
Heavy-Duty Cover
▼ -EXT
-60
-61
-HD
• 3” sizes normally furnished with 4” x 3” reducing bushings.
TYPE
NO.
FLOW
RATE
GPM
PIPE
SIZE
60503B
60504B
60505B
60506B
60507B
60508B
10
15
20
25
35
50
2
2
3•
3•
3•
3•
ROUGH-IN
CENTERS
C
D
10-1/2
12-3/4
14-5/8
16
16-3/4
18-1/2
LGTH. WIDTH
E
F
4-1/8 15-7/16 12-3/8
3-3/8 18-3/16 14-1/2
4-3/8 19-15/16 16-3/8
4
21-11/16 17-1/2
4-7/8 25-5/16 19-1/4
6-1/4 28-11/16 21-1/2
HGT.
G
VENT & DRAW OFF
ROUGH-IN
M
R
S
14-5/8 6-5/8
16-1/8
8
19
8-7/8
20
9-3/4
21-5/8 11-9/16
24-3/4 13-1/4
2-7/8
2-5/8
2-3/4
2-3/4
2-3/4
3
LBS.
8-1/2
10-3/4
12
13-1/2
14-1/4
16
55
72
85
105
130
155
60500B-EXT SERIES
with Extension
APPLICATION
For use in service stations, parking garages, car and truck washes and industrial
plants where discharged water contains oil, sediment and other volatile liquids.
Separator collects oil and conveniently permits the collected oil to be drained to a
storage tank by means of an adjustable gravity draw-off connection. Sediment and
debris are collected in a sediment bucket that can be periodically removed. An
extended top with fixed extension is supplied for installations requiring additional
roughing depth from center of inlet and outlet to finished floor height.
SPECIFICATION
JOSAM 60500B-EXT Series fabricated steel Oil Separator, epoxy coated inside and
outside, threaded connections, deep roughing, integral extension, internal trap,
sediment bucket, two vent connections on each side, gasketed non-skid cover and
flow control fitting.
• 3” sizes normally furnished with 4” x 3” reducing bushings.
TYPE
NO.
60503B-EXT
60504B-EXT
60505B-EXT
60506B-EXT
60507B-EXT
60508B-EXT
FLOW
RATE PIPE
GPM SIZE
10
15
20
25
35
50
2
2
3•
3•
3•
3•
ROUGH-IN
CENTERS
C
D♦
10-1/2
12-3/4
14-5/8
16
16-3/4
18-1/2
10-1/8
9-3/8
10-3/8
10
10-7/8
12-1/4
VENT & DRAW OFF
ROUGH-IN
M
R
S
LGTH.
E
WIDTH
F
HGT.
G♦
15-7/16
18-3/16
19-15/16
21-11/16
25-5/16
28-11/16
12-3/8
14-1/2
16-3/8
17-1/2
19-1/4
21-1/2
20-5/8 6-5/8
22-1/8
8
25
8-7/8
26
9-3/4
27-5/8 11-9/16
30-3/4 13-1/4
2-7/8
2-5/8
2-3/4
2-3/4
2-3/4
3
8-1/2
10-3/4
12
13-1/2
14-1/4
16
LBS.
55
72
85
105
130
155
♦
DIMENSIONS BASED ON STD. 6" EXTENSION.
▼ Product Illustration follows.
225
Interceptors_08.qxd
5/2/08
3:02 PM
Page 226
OIL SEPARATORS
60500-EST SERIES
with External Storage Tank
APPLICATION
For use in service stations, parking garages, car and truck washes, industrial plants and
elevator pits where discharged water contains oil, sediment and other volatile liquids.
Separator collects oil and conveniently permits the collected oil to be drained directly
to the integral storage tank by means of an adjustable gravity draw-off connection.
Sediment and debris are collected in a sediment bucket that can be periodically removed.
SPECIFICATION
JOSAM 60500-EST Series fabricated Oil Separator, epoxy coated inside and outside,
flush-with-floor type with oil storage tank, threaded connections, flat bottom, visible
double-wall trap, sediment bucket, gasketed cover, check valve and flow control fitting.
INTERCEPTORS
Available Options
-EXT
-HD
-19
-60
-61
Extension, 8” Standard, Specify Extension Height
Heavy-Duty Cover
Reclaim Tank Alarm
Anchor Flange
Flange and Clamp Device
• 3” sizes normally furnished with 4” x 3” reducing bushings.
TYPE
FLOW
RATE
TANK
(GAL.)
PIPE
SIZE
A
B
C
D
E
F
12-1/4
60503-EST-50
10
50
2
33-1/2
20
9-3/8
4
19-3/8
60504-EST-50
15
50
2
33-1/2
20
11-1/2
4-5/8
22-1/8
14
60505-EST-50
20
50
3•
33-1/2
20
13
4-3/8
24-3/4
16
60506-EST-50
25
50
3•
33-1/2
20
14-1/2
4
26-3/8
17
60506-EST-100
25
100
3•
38
24
14-1/2
4
26-3/8
17
60507-EST-50
35
50
3•
33-1/2
20
15-1/2
4-7/8
30
19-3/4
60507-EST-100
35
100
3•
38
24
15-1/2
4-7/8
30
19-3/4
60508-EST-50
50
50
3•
33-1/2
20
17-1/2
6
33-3/8
22
60508-EST-100
50
100
3•
38
24
17-1/2
6
33-3/8
22
TYPE
G
H
L
M
N
P
Q
S
V
60503-EST-50
13-3/8
28
34-1/4
3-3/4
5
10
22
6
30
60504-EST-50
16-1/8
28
36
4-1/2
7-1/4
12-1/2
22
7-3/4
30
60505-EST-50
17-3/8
28
38
6-1/8
8
15-3/4
22
8-1/4
30
60506-EST-50
18-1/2
28
39
5-1/4
8
16-1/2
22
9-1/4
30
60506-EST-100
18-1/2
36
43
5-1/4
8
16-1/2
26
9-1/4
38
60507-EST-50
20-3/8
28
41-3/4
6-1/2
8
19
22
10
30
60507-EST-100
20-3/8
36
45-3/4
6-1/2
8
19
26
10
38
60508-EST-50
23-1/2
28
44
7
8
21-1/2
22
11-1/4
30
60508-EST-100
23-1/2
36
48
7
8
21-1/2
26
11-1/4
38
226
Interceptors_08.qxd
3/27/08
11:59 AM
Page 227
OIL SEPARATORS
60610A SERIES
DRAW-OFF TYPE
APPLICATION
For use in large service stations, parking garages, car and truck washes and industrial
plants where discharged water contains high volumes of waste laden with oil, sediment and other volatile liquids. Separator collects oil and conveniently permits the
collected oil to be drained to a storage tank by means of an adjustable gravity drawoff connection. Sediment and debris are collected in a sediment bucket that can be
periodically removed.
SPECIFICATION
JOSAM 60610A Series fabricated steel Oil Separator, epoxy coated inside and outside,
high volume, threaded connections, visible double wall trap and sediment bucket,
adjustable gravity draw-off either side, two vent connections on each side, gasketed
non-skid cover and flow control fitting.
Available Options
TYPE
NO.
Extension, 6” Standard (Specify Extension Height)
Anchor Flange
Flange and Clamp Device
Heavy-Duty Cover
ROUGH-IN
CENTERS
FLOW
RATE PIPE
GPM SIZE
INTERCEPTORS
▼ -EXT
-60
-61
-HD
VENT & DRAW OFF
ROUGH-IN
C
D
LGTH. WIDTH HGT. COVER
E
F
G
H
60611A
75
3
21
6
46-1/4
31
27
41
8-1/4
12-1/2 10-1/4 13-1/2
450
60612A
100
4
23
8
54
35
31
47
9-1/2
14-1/2 12-1/2 15-1/4
575
60613A
150
4
27
8
60
39
35
53
10-1/2 16-1/2 14-1/2 19-1/4
750
60614A
200
5
31-1/2
10
67
42
41-1/2
58
11-1/2 18-1/8
1200
60615A
250
5
35-1/2
10
72
46
45-1/2
63
12-1/2 20-1/4 17-1/2 29-3/4
1475
60616A
350
6
39-1/2
12
80
52
51-1/2
71
13-1/2
23
1875
60617A
500
6
43-1/2
12
91
59
55-1/2
82
16
27
M
N
P
16
S
26-1/4
19-3/4 34-1/4
23
38-1/4
LBS.
2575
*
60611A, 60612A & 60613A ARE FURNISHED WITH ONE-PIECE COVER.
60610A-EXT SERIES
with Extension
APPLICATION
For use in large service stations, parking garages, car and truck washes and industrial
plants where discharged water contains high volumes of waste laden with oil, sediment and other volatile liquids. Separator collects oil and conveniently permits the collected oil to be drained to a storage tank by means of an adjustable gravity draw-off
connection. Sediment and debris are collected in a sediment bucket that can be periodically removed. An extended top with fixed extension is supplied for installations
requiring additional roughing depth from center of inlet and outlet to finished floor
height.
SPECIFICATION
JOSAM 60610A-EXT Series fabricated steel Oil Separator, epoxy coated inside and
outside, high volume, deep roughing, integral extension, threaded connections, visible
double wall trap, sediment bucket, adjustable gravity draw-off either side, two vent
connections on each side, gasketed non-skid cover and flow control fitting.
FLOW
RATE PIPE
GPM SIZE
ROUGH-IN
CENTERS
VENT & DRAW OFF
ROUGH-IN
C
D♦
LGTH. WIDTH HGT. COVER
E
F
H
G♦
60611A-EXT
75
3
21
12
46-1/4
31
33
41
8-1/4
12-1/2 10-1/4 13-1/2
600
60612A-EXT
100
4
23
14
54
35
37
47
9-1/2
14-1/2 12-1/2 15-1/4
750
60613A-EXT
150
4
27
14
60
39
41
53
10-1/2 16-1/2 14-1/2 19-1/4
975
60614A-EXT
200
5
31-1/2
16
67
42
47-1/2
58
11-1/2 18-1/8
1200
60615A-EXT
250
5
35-1/2
16
72
46
51-1/2
63
12-1/2 20-1/4 17-1/2 29-3/4
1475
60616A-EXT
350
6
39-1/2
18
80
52
57-1/2
71
13-1/2
23
1875
60617A-EXT
500
6
43-1/2
18
91
59
61-1/2
82
16
27
TYPE
NO.
M
N
P
16
S
26-1/4
19-3/4 34-1/4
23
38-1/4
LBS.
2575
♦
*
DIMENSIONS BASED ON STD. 6” EXTENSION
60611A-EXT, 60612A-EXT & 60613A-EXT ARE FURNISHED WITH ONE-PIECE COVER.
▼ Product Illustration follows.
227
Interceptors_08.qxd
4/9/08
9:32 AM
Page 228
OIL SEPARATORS
60610-EST SERIES
with External Storage Tank
APPLICATION
For use in service stations, parking garages, car and truck washes, industrial plants and
elevator pits where discharged water contains high volumes of waste laden with oil, sediment and other volatile liquids. Separator collects oil and conveniently permits the collected oil to be drained directly to the integral storage tank by means of an adjustable
gravity draw-off connection. Sediment and debris are collected in a sediment bucket that
can be periodically removed.
SPECIFICATION
JOSAM 60610-EST Series fabricated Oil Separator, epoxy coated inside and outside,
flush-with-floor type with oil storage tank, threaded connections, flat bottom, visible
double-wall trap, sediment bucket, gasketed cover, check valve and flow control fitting.
INTERCEPTORS
Available Options
-EXT
-HD
-19
-60
-61
Extension, 8” Standard, Specify Extension Height
Heavy-Duty Cover
Reclaim Tank Alarm
Anchor Flange
Flange and Clamp Device
FLOW TANK PIPE
RATE (GAL.) SIZE
D
E
F
G
H
J
N
T
V
W
LBS.
8
46
31
29
41
4
12
37
24
59
1200
4
8
54
35
31
47
5
14
48
35
70
1500
4
10
60
39
37
53
5
16
45
35
74
2000
250
5
15
67
42
49
54
6
18
48
35
77
2400
250
500
5
15
72
46
51
63
6
20
60
45
91
3000
60616-EST
350
500
6
15
80
52
55
71
6
23
56
45
97
3800
60617-EST
500
500
6
26
91
59
70
83
6
27
66
45
104
5200
TYPE
60611-EST
75
100
3
60612-EST
100
250
60613-EST
150
250
60614-EST
200
60615-EST
228
*
60611-EST, 61612-EST and 61613-EST FURNISHED WITH ONE-PIECE COVER.
Interceptors_08.qxd
3/27/08
11:59 AM
Page 229
OIL SEPARATORS
60810 SERIES
OIL SEDIMENT INTERCEPTOR
APPLICATION
SLOT WIDTH 1/2”
For use in service stations, parking garages, car and truck washes and industrial plants
where discharged water contains oil, sediment and other volatile liquids. Sediment and
debris are collected in the sediment pan and removable bucket, which are accessible by
removing the top grate. Oil and grease are trapped in the unit and may be skimmed off
periodically.
SPECIFICATION
JOSAM 60810 Series steel Oil Sediment Interceptor with acid-resisting coating, threaded
connection, flat bottom, visible double wall trap, removable sediment bucket, primary
and secondary screens and medium-duty cast iron grate(s).
INTERCEPTORS
TYPE
NO.
60816
60817
60818
60819
PIPE
SIZE
2
4
4
4
GRATE
FREE
SLUDGE
AREA NO. OF CAP
(SQ. IN.) GRATES (LBS.)
E
F
54
1
12
17-1/2 12-1/8
112
1
60
29-7/8 12-1/2
224
2
100 29-7/8 24-1/2
336
3
200 41-7/8 24-1/2
G
15
25
25
35
H
12-1/8
24-1/2
24-1/2
36-1/2
LBS.
60
175
280
360
229
Interceptors_08.qxd
5/2/08
3:04 PM
Page 230
SOLIDS INTERCEPTORS
61000 SERIES
BOTTOM ACCESS FIXTURE TRAP TYPE
APPLICATION
For use on the lavatory or sink in barber shops, beauty salons, dormitories and motels
where hair, lint and other solids are commonly encountered. May also serve as a
means of retrieving rings, other valuables or dental grindings, which have been
dropped into the sink or lavatory. Cleaning is accomplished by removal of bottom
cover and basket.
SPECIFICATION
JOSAM 61000 Series Nikaloy Solids Interceptor, bottom access, fixture trap type, slip
joint inlet, 1-1/2" threaded side outlet, gasketed cover and removable perforated
stainless steel basket.
INTERCEPTORS
Available Options
-1 Painted Cast Iron
-3 Polished Bronze
-30 Acid-Resisting C.I. Inside and Outside
TYPE NO.
61001-1/4
61001-1/2
INLET A
1-1/4
1-1/2
OUTLET B
1-1/2
1-1/2
LBS.
6
6
NOTE: 6" MIN. CLEARANCE REQUIRED BELOW COVER FOR REMOVAL OF BASKET.
61030 SERIES
TOP ACCESS FIXTURE TRAP TYPE
APPLICATION
For use as a means of collecting solids such as metal chips, plaster and grindings in
dental offices, jewelry and optical shops or similar establishments where the unit can
be mounted directly under the sink to recover precious metals as well as intercept
harmful debris. Cleaning is accomplished by removal of top cover and basket.
SPECIFICATION
JOSAM 61030 Series coated cast iron Solids Interceptor, top access, fixture trap type,
threaded connections, gasketed cover, removable galvanized steel basket and stainless
steel screen.
Available Options
-26 Cast Aluminum
-30 Acid-Resisting Inside and Outside
TYPE NO.
61031-1/2
61032
230
PIPE SIZE
1-1/2
2
LBS.
9
9
❑
MIN. HEIGHT REQUIRED FOR REMOVAL OF BUCKET AND SCREEN.
Interceptors_08.qxd
5/2/08
3:02 PM
Page 231
SOLIDS INTERCEPTORS
61040A SERIES
TOP ACCESS ON-FLOOR TRAP TYPE
APPLICATION
For use as a means of collecting large amounts of solids such as metal chips, plaster
and grindings in dental offices, hospitals and optical shops or similar establishments
where the unit can be mounted on the floor under the sink to recover precious metals
as well as intercept harmful debris. Cleaning is accomplished by removal of top cover
and basket.
SPECIFICATION
JOSAM 61040A Series steel Solids Interceptor with acid-resisting coating, top access,
on-floor trap type, with 2" threaded connections, side outlet, gasketed non-skid cover,
removable galvanized steel basket and stainless steel screens.
Available Options
-EXT
-16
Extension, 6” Standard (Specify Extension Height)
Monel Screens
INTERCEPTORS
TYPE NO.
61042A
61043A
61044A
PIPE SIZE
2
3
4
D
3 1/2
4 1/2
5 1/2
E
31
32
33
G
16 5/8
17 5/8
18 5/8
LBS.
54
60
55
■
MIN. HGT. REQUIRED FOR REMOVAL OF SOLIDS BASKET.
ADD EXT. HGT. TO MIN. HGT. REQUIRED IF FURNISHED WITH EXT.
61070 SERIES
TOP ACCESS IN-LINE TYPE
APPLICATION
For use as a means of collecting solid waste materials, hair, lint and foreign particles
ahead of swimming pool filters and processing devices or commercial laundry equipment. Cleaning is accomplished in minimal time by removal of top cover secured with
swing bolts and basket.
BASKET FREE AREA
85.0 SQ. IN.
SPECIFICATION
JOSAM 61070 Series cast iron Solids Interceptor with acid-resisting coating, top access,
in-line type, threaded connections, 2" threaded drain or blow-off connection, removable
perforated copper basket with conical solid bottom, gasketed cast iron support rim and
gasketed cover seated on basket support rim secured with hex head bolts.
Available Options
-4 Galvanized Cast Iron Parts
-15 Stainless Steel Basket
-86 Flat Bottom Basket
TYPE NO.
61072
61073
61074
PIPE SIZE
2
3
4
LBS.
65
65
65
231
Interceptors_08.qxd
5/2/08
6:14 PM
Page 232
SOLIDS INTERCEPTORS
61080 SERIES
TOP ACCESS IN-LINE TYPE
APPLICATION
For use as a means of collecting very large quantities of solid waste materials, hair,
lint and foreign particles ahead of swimming pool filters and processing devices or
commercial laundry equipment. Cleaning is accomplished in minimal time by removal
of top cover secured with gasketed compression yoke and basket.
BASKET FREE AREA
250 SQ. IN.
SPECIFICATION
JOSAM 61080 Series cast iron Solids Interceptor with acid-resisting coating, top access,
in-line type, threaded connections, 2" threaded drain or blow-off connection, removable
perforated copper basket with conical solid bottom, gasketed cast iron support rim and
gasketed cover seated on basket. Support rim secured with hex head bolts.
INTERCEPTORS
Available Options
-4 Galvanized Cast Iron Parts
-15 Stainless Steel Basket
-86 Flat Bottom Basket
TYPE NO.
61084
61085
61086
PIPE SIZE
4
5
6
LBS.
202
202
212
61800 SERIES
LINT INTERCEPTOR
APPLICATION
For use as a means of collecting very large quantities of solid waste materials, hair,
lint and foreign particles ahead of swimming pool filters and processing devices or
commercial laundry equipment. Cleaning is accomplished through removal of nonskid cover and basket.
SPECIFICATION
JOSAM 61800 Series Lint Interceptor with acid-resisting coating, non-skid cover, galvanized steel bucket with stainless steel screens and threaded connections.
Available Options
-EXT
TYPE
NO.
61805
61806
61807
61808
232
Extension, 6” Standard (Specify Extension Height)
FLOW MAX. NO.
OF
PIPE
RATE
GPM WASHERS SIZE
70
7
3
200
20
4
300
30
6
400
40
6
C
12
14
16
18
D
6
6
6
6
E
20
22
25
29
F
17
18
20
22
G
18
20
22
24
LBS.
90
120
190
220
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising