connection specifications

connection specifications
Stand alone wall mounted DMX controller
Technical datasheet
Revision date 26 Sep. 2012
LDTOUCH ULTI
Page 1/4
www.lumidesk.com
Version 1.0
Rechargeable
battery
106 mm
Touch-sensitive
user interface
Screw-terminal
rear connector
(5 pins)
Dimmer
78%
Extension socket
rear connectors
(2x10 pins)
146
mm
Power+DMX
socket
(RJ45)
Ethernet socket
(RJ45)
Front access
connections
11 mm
Package
Interface, sdcard, datasheet, cdrom, usb cable
Software
DVC3 on PC/Windows
Mobile Apps
DMX Lightpad 3 + ARCOLIS on iPhone/iPad/Android
Available colors
Options
See the OPTIONS table
Standards
data
led
mini
usb
reset micro dmx
button SD
led
Black frame, various front panel design
EC, EMC, ROHS, ETL, UL (some are in process)
Temperature
-10ºC to 45ºC
Dimensions
146x106x11 mm
Weight
CONNECTION
SPECIFICATIONS
247 g 8.71 oz
Built-in
features
Screw-terminal
rear connector
(5 pins)
Power Supply
6V DC 0.6A, optional
•
DMX Output #1
First universe, 512 channels DMX512 output
•
DMX Output #2
Second universe, 512 channels DMX512 output
USB
Ethernet
Complete package 177x146x48 mm
Complete package 492 g 17.4 oz
Extension
socket
rear connectors
(2x10 pins)
Power+DMX
socket
(RJ45)
Ethernet
socket
(RJ45)
•
•
•
•
•
Front access
connections
USB
•
USB communication for PC/Mac software
•
Advanced networking features
Ports 1,2,...,8
8 Contact closure inputs, connect to ground for operating
User interface
10 buttons, 1 wheel, 1 color display, 5 leds
(Touch-sensitive keypad)
•
power/data
leds
•
SD card
Micro sd card for stand alone memory use (supplied)
•
RESET
Push button for feet operation
•
RS232 serial communication for external synchronisation
•
Output relay
RS232
Automatic standby 5V signal
•
Clock
Real-time clock and calendar
•
OPTIONS / ACCESSORIES
RJ2BLOCK
RJ45 to connector block converter for POWER+DMX
POWER4M
Dedicated power adapter 110-220V to 6VDC
VERSIONS
WHITE, choices of wheel design
© Lumidesk 1989-2012. All rights reserved. We reserve the right without notice to amend the technical information and specifications.
Stand alone wall mounted DMX controller
Technical datasheet
Revision date 26 Sep. 2012
LDTOUCH ULTI
Page 2/4
www.lumidesk.com
Version 1.0
EASY INSTALLATION
1. Mount an electrical box
inside the wall
The S.T.I.C.K. controller can be installed in any standard
electrical backbox. If you use a double size box,
you can insert the power supply inside.
2. Connect the wires
POWER: Connect a 5.5V or 6V DC 0.6A.
Be sure to not invert the + and the ground.
DMX: Connect the DMX cable to the lighting
receivers (Leds, Dimmers, Fixtures..)
(for XLR: 1=ground 2=dmx- 3=dmx+)
3. Mount the interface on the wall
First, mount the back side of the interface on the wall with 2 or more screws
Secondly, plug the connectors :
- Ethernet cable
- DMX and power (connector block or RJ45)
POWER+DMX
with the
connector block
POWER
DC +
POWER
Ground
DMX
Ground
DMX DMX +
POWER+DMX
with the
RJ45 cable
© Lumidesk 1989-2012. All rights reserved. We reserve the right without notice to amend the technical information and specifications.
1 DMX +
1.......8
POWER
2 DMX +DMX
3 DMX2 +
4 POWER
5 DC +
6 DMX2 7 POWER
8 GROUND
(
(
Stand alone wall mounted DMX controller
Technical datasheet
Revision date 26 Sep. 2012
LDTOUCH ULTI
Page 3/4
www.lumidesk.com
Version 1.0
2x10 pins EXTENSION connector
DMX CHIPS can be
replaced here
VIN
GND
IR_RX
3.3V
Relay
DMX2+
DMX2DMX1+
DMX1GND_DMX
DMX
universe #1
DMX
universe #2
Ref: SP485ECN-L
MAX485 CSA
BLACKOUT relay
(energy saving)
using the 2 pins : BK
and G (GND)
20
18
16
14
12
10
8
6
4
2
19
17
15
13
11
9
7
5
3
1
PORT1
PORT2
PORT3
PORT4
PORT5
PORT6
PORT7
PORT8
RS232 RX
RS232 TX
Compatible connectors:
WURTH ELEKTRONIK ref: 61301021121
MOLEX ref: 10-89-7202
TE Connectivity ref: 1-87227-0
FCI ref: 77313-101-20LF
HARWIN ref: M20-9981046
SAMTEC ref: TSW-110-xx-T-D
FARNELL ref: 1841232
RS ref: 763-6754 673-7534 251-8165
MOUSER ref: 538-10-89-7202
DIGIKEY ref: WM26820-ND
Example of relay : FINDER
Ref. 22.23.9.012.4000
http://www.findernet.com/fr/products/
profiles.php?serie=22&lang=en
RS232 triggering
Make a cable using the 3 pins : TX, RX and G (GND)
Set the RS232 parameters to : 9600bds 8 bits, no Parity, 2 Stop bits
- To play a scene, send 3 bytes : 1 x 255
(x = scene number)
- To stop a scene, send 3 bytes : 2 x 255
(x = scene number)
- To pause a scene, send 3 bytes :
3 x 255
(x = scene number)
- To release a pause, send 3 bytes :
4 x 255
(x = scene number)
- To reset a scene, send 3 bytes : 5 x 255
(x = scene number)
Note: the scene number (x) can be from 1 to 40. For instance, 11 means Page B Scene #3
PORTS triggering
It is possible to start scenes using the input ports (contact closure). To activate a port, a brief
contact must be established between the ports (1...8) and the ground (GND). This is a contact
closure so there is no need to hold the connection, it acts like a basic switch.
P1 P2 P3 P4 ...
GND
© Lumidesk 1989-2012. All rights reserved. We reserve the right without notice to amend the technical information and specifications.
Stand alone wall mounted DMX controller
Technical datasheet
Revision date 26 Sep. 2012
LDTOUCH ULTI
Page 4/4
www.lumidesk.com
Version 1.0
INTERNAL MENU (hardware configuration)
Button >
Button <
ZONE+
ZONE-
Press and hold the ON/OFF button for 3 seconds to get into the settings menu. Here are the available parameters:
- Mode (M) : allows to enable/disable speed/dimmer/...buttons
- Arrows (A) : allows to change the function of < and > arrows
- Palet (P) : allows to enable/disable the palet functions (speed/dimmer/color)
- Scene (S) : allows to change various settings (fade time, pause/stop...)
- First Start (F) : allows to setup what to do at startup (play a scene, blackout, etc...)
- Trigger (T) : allows to enable/disable triggers (RS232, IR, ports...)
- Ethernet (E) : allows to setup Ethernet parameters (IP address...)
- Date/Time (T) : allows to change date and time of the device
- Graphics (G) : allows to change the display settings (sleep mode, brightness...)
- DMX output (X) : allows to change the DMX signal parameters (speed...)
- Diagnostic : shows the date/time, firmware version...
- Reset : allows to reset the unit to factory settings
The < and > arrows allows you to move the cursor in the menu or change a value, the ZONE+ buttons allows you to
edit/validate a value or enter a submenu, the ZONE- button allows you to return to the previous menu/submenu (read
the hardware manual for a complete description).
SOFTWARE and LINKS
ARCOLIS sofware (Touch Lighting Editor app for iPhone/iPad, Android)
DMX Lightpad 3(Remote application for iPhone/iPad, Android, Windows)
=>download your application from Google Play, Apple App Store or Windows Mobile website
Lumidesk (Windows)http://www.lumidesk.com/support.php
Driver, Firmware, Toolshttp://www.lumidesk.com/support.php
© Lumidesk 1989-2012. All rights reserved. We reserve the right without notice to amend the technical information and specifications.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising