ENVIROPRO® TEKDEK™ Luminaires for Freezers and

ENVIROPRO® TEKDEK™ Luminaires for Freezers and
PROJECT INFORMATION
ENVIROPRO® TEKDEK™
Luminaires for Freezers and Refrigerated Spaces
Job Name
Fixture Type
EPTD17 SERIES
Catalog Number
PRODUCT FEATURES:
Approved by
»»Textured tertiary lens for glare reduction and up-light feature
to eliminate “cave-effect”
»»Optical patterns designed for uniform area illumination
»»Outputs ranging from 4,925 lm to 11,470 lm
»»Patented thermal management, and Optical Patents pending
»»10 Year limited product warranty
»»3G vibration tested
SPECIFICATIONS
HOUSING: Marine-grade die-cast aluminum and UV-stabilized polycarbonate construction. Standard TGIC polyester power coat finish on aluminum components with five-step pre-treatment to
withstand 1,000 hour salt spray test per ASTM B117. See Ordering Information for available finishes. Closed-cell silicone gasketing seals all housing component interfaces. Die-cut closed-cell
neoprene self-adhesive gasket seals housing to mounting surface (DTS).
MOUNTING: Direct-to-surface (DTS) mounting over recessed junction box, or pendant-mounted (PM) via ¾" (1.91 cm) rigid sealed conduit. See Ordering Information for selection. Housing access
secured via tamper-resistant Torx™ fasteners.
OPTICAL: Type V-Narrow and V-Square distributions available. UV-stabilized, high-impact resistant injection-molded clear textured 100% DR acrylic or polycarbonate tertiary lens.
ELECTRICAL: Serviceable high-brightness LED array. See Ordering Information for color temperature and CRI options. 70 CRI minimum. 120-277 VAC, 347VAC and 480VAC 50/60Hz single-phase
input; constant-current dimming driver; <10% THD, >0.95 PF. Minimum 83% electrical efficiency. 0-10V dimming protocol with 1-100% range, 0.2mA source current. Replaceable surge suppressor
rated to 20kA/kV per IEEE/ANSI C62.41 Cat. A. Passes IEC 61000-4-4 EFT and IEC 61000-4-5 (Class 4) surge evaluation.
TEKLINK™ TL50: An independent lighting control system integral to the luminaire, featuring its own occupancy sensor, daylight harvesting and adjustable time-out/dimming settings.
PHOTOMETRICS: Photometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For photometric data, please go to www.kenall.com.
WARRANTY: Limited ten (10) year warranty.
LISTINGS: Luminaire is certified to UL Standards by Intertek Testing Laboratory for Wet Location. IP65 rating per IEC 60598. Suitable for installation into -40°C to 40°C ambient environments,
unless otherwise noted.
LED
IP65
ORDERING INFORMATION (Ex: EPTD17-PM-5N-TP-DB-75L-40K8-DCC-DV)
Model
Mounting
Dist. Type
Lens Type Finish
Lamp Power
Lamp Color
EPTD17
Mounting
DTSDirect-to-Surface
PM Pendant Mount
Distribution Type
5N Type V – Narrow Round
5S Type V – Wide Square
Lens Type
TP
Textured Polycarbonate
TA
Textured Acrylic
Finish
GW
LG
Reflectance White
Light Gray
Driver Type
Voltage
Options
Accessories
TekLink
Controls Kit
DCC
<
Lamp Power
49L
49W LED
75L
75W LED
104L
104W LED
Voltage
DV
120-277 Volts (50/60Hz)
347
347 Volts (60Hz)
480• 480 Volts (60Hz)
Lamp Color
30K8 3000K/80CRI min
35K8 3500K/80CRI min
40K8 4000K/80CRI min
40K7 4000K/70CRI min
50K7 5000K/70CRI min
57K7 5700K/70CRI min
Options
LEL‡•Emergency Battery Pack
(0°C minimum ambient)
FS
Single Fuse & Holder
PH
Phillips Fasteners
A1•W A1 Construction Override
Driver Type
DCC
0-10V Dimming Constant Current
www.kenall.com
P: 800-4-Kenall
Accessories
DS
Debris Shield
TekLink
TL50§
TL50 Control System
Please consult Kenall Applications when ordering Controls
Controls Kit
<
> Factory Assigned Internal Code
‡
§
•
W
F: 262-891-9701
>
Available only with 49L lamp
S1 Construction (See page 3)
A1 Construction (See page 3)
For surface conduit option or matching other fixtures
on schedule that have options with A1 construction
10200 55th Street Kenosha, Wisconsin 53144
When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers, and meets the Buy
American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof. May be covered by patents found
at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2016 Kenall Mfg. Co. All rights reserved.
EPTD17-011817
ENVIROPRO® TEKDEK™
Luminaires for Freezers and Refrigerated Spaces
EPTD17 SERIES
PERFORMANCE
Initial Delivered Lumens, By Optic Type (lm)
Lamp Code
5S-TA
5S-TP
5N-TA
5N-TP
Efficacy
(lm/W)
Input Power
(W)
Estd. L70
LED Life (Hrs)
49L-57K7
6,658
6,520
7,178
7,151
104 - 128
56
150,000
49L-50K7
6,658
6,520
7,178
7,151
104 - 128
56
150,000
49L-40K7
6,658
6,520
7,178
7,151
104 - 128
56
150,000
49L-40K8
5,920
5,797
6,383
6,358
93 - 114
56
150,000
49L-35K8
5,624
5,507
6,064
6,040
88 - 108
56
150,000
49L-30K8
5,624
5,507
6,064
6,040
88 - 108
56
150,000
75L-57K7
8,935
8,750
9,634
9,596
96 - 119
81
125,000
75L-50K7
8,935
8,750
9,634
9,596
96 - 119
81
125,000
75L-40K7
8,935
8,750
9,634
9,596
96 - 119
81
125,000
75L-40K8
7,945
7,780
8,566
8,533
85 - 106
81
125,000
75L-35K8
7,547
7,391
8,138
8,106
81 - 100
81
125,000
75L-30K8
7,547
7,391
8,138
8,106
81 - 100
81
125,000
104L-57K7
10,638
10,418
11,470
11,426
81 - 102
113
110,000
104L-50K7
10,638
10,418
11,470
11,426
81 - 102
113
110,000
104L-40K7
10,638
10,418
11,470
11,426
81 - 102
113
110,000
104L-40K8
9,459
9,263
10,199
10,159
72 - 90
113
110,000
104L-35K8
8,986
8,800
9,689
9,651
69 - 86
113
110,000
104L-30K8
8,986
8,800
9,689
9,651
69 - 86
113
110,000
Displayed information is for selected luminaires only. Information subject to change without notice.
Visit www.kenall.com for .ies files and additional information.
Model: EPTD17-XX-5S-TA-GW-104L-40K7-DCC-DV
Model: EPTD17-XX-5N-TA-GW-104L-40K7-DCC-DV
4137
2768
3103
2076
2
2069
1034
692
1
1
Max Candela = 4137 Located At Horizontal Angle = 45, Vertical Angle = 60
2
1384
1 - Vertical Plane Through Horizontal Angles (45 - 225) (Through Max. Cd.)
2 - Horizontal Cone Through Vertical Angle (60) (Through Max. Cd.)
Max Candela = 2768 Located At Horizontal Angle = 75, Vertical Angle = 30
1 - Vertical Plane Through Horizontal Angles (75 - 255) (Through Max. Cd.)
2 - Horizontal Cone Through Vertical Angle (30) (Through Max. Cd.)
LUMEN AMBIENT TEMPERATURE (LAT) FACTORS
Avg. Ambient Temperature
10oC
15oC
20oC
25oC
30oC
35oC
40oC
Lumen Output Factor
1.03
1.02
1.01
1
0.99
0.98
0.97
www.kenall.com
P: 800-4-Kenall
F: 262-891-9701
10200 55th Street Kenosha, Wisconsin 53144
When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers, and meets the Buy
American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof. May be covered by patents found
at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2016 Kenall Mfg. Co. All rights reserved.
EPTD17-011817
For additional photometry, go to www.kenall.com
ENVIROPRO® TEKDEK™
Luminaires for Freezers and Refrigerated Spaces
EPTD17 SERIES
CONSTRUCTION 'S1' DIMENSIONS
DIMENSIONAL DATA
Ø.312"
Ø.79 cm
TOP VIEW
17.00"
43.18 cm
*5.50"
13.97 cm
SIDE VIEW
1.36"
3.45 cm
3/4 (1.91 cm)
NPS
9.00"
22.86 cm
9.31"
*5.50" 23.65 cm
13.97 cm
17.00"
43.18 cm
Product built as above under all configurations,
except as noted for options below.
*DTS Mounting Only
CONSTRUCTION 'A1' DIMENSIONS
17.00"
43.18 cm
7.00"
17.78 cm
17.00"
43.18 cm
3.00"
7.62 cm
7.00"
17.78 cm
Ø1.10"
Ø(2.79 cm) (DTS)
3/4" (1.91 cm)
NPS (TK/PM)
10.75"
27.31 cm
Ø.312"
Ø.79 cm
Product built as A1 when ordered with '480V', 'LEL', 'A1'
CONSTRUCTION 'A2' DIMENSIONS
17.00"
43.18 cm
7.00"
17.78 cm
17.00"
43.18 cm
3.00"
7.62 cm
7.00"
17.78 cm
Ø1.10"
Ø(2.79 cm) (DTS)
3/4" (1.91 cm)
NPS (TK/PM)
Ø.312"
Ø.79 cm
11.50"
29.21 cm
Sensor
CONSTRUCTION 'A3' DIMENSIONS
Ø.312"
Ø.79 cm
17.00"
43.18 cm
*5.50"
13.97 cm
9.31"
*5.50" 23.65 cm
13.97 cm
*DTS Mounting Only
www.kenall.com
1.36"
3.45 cm
3/4 (1.91 cm)
NPS
P: 800-4-Kenall
9.86"
25.04 cm
Sensor
17.00"
43.18 cm
F: 262-891-9701
10200 55th Street Kenosha, Wisconsin 53144
When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers, and meets the Buy
American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof. May be covered by patents found
at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2016 Kenall Mfg. Co. All rights reserved.
EPTD17-011817
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising