Dome Camera and Mounting Kit Setup Guide

Dome Camera and Mounting Kit Setup Guide
Dome Camera and Mounting Kit Setup Guide
Dome Camera WP-7122
Mounting Box 8161BP
Cam-Kit SC5
Telescoping Pole Mounts CE-CP6W, CE-CP6B,
CE-CP12W, or CE-CP12B
Watcherprotect.com
♦
Watcher Products
♦
877-289-2824
Attaching WP-7122 Camera to Telescoping Pole Mounts
If a WP-7122 is going to be suspended from a ceiling using pole mount CE-CP6W, CE-CP6B,CE-CP12W, or
CE-CP12B, an adapter mounting kit must be used. Using Mounting Box #8161BP and Cam-Kit SC5, a WP7122 dome camera can easily be attached to a pole.
8161BP Mounting Box
SC5 Cam-Kit
1. Remove mounting kits from packaging. *See SC5 manual for attaching camera to Cam-Kit.
2. Remove bracket from the SC5 Cam-Kit.
Watcherprotect.com
♦
Watcher Products
♦
877-289-2824
2
3. The bracket comes in the locked position.
4. Turn the bracket to the unlocked position.
Watcherprotect.com
♦
Watcher Products
♦
877-289-2824
3
5. Separate the bracket from the mounting kit.
6. Place the 8161BP Mounting Box mounting side up.
Watcherprotect.com
♦
Watcher Products
♦
877-289-2824
4
7. Line up the bracket from SC5 with the mounting holes on the 8161BP Mounting Box. Make sure the
clips are facing up.
8. Secure the bracket to the mounting box using the provided screws.
Watcherprotect.com
♦
Watcher Products
♦
877-289-2824
5
9. Attach the SC5 to the 8161BP Mounting Box.
10. Turn the SC5 to the lock position.
11. Attach painted set screw to secure bracket.
Watcherprotect.com
♦
Watcher Products
♦
877-289-2824
6
Attaching Mounting Box to Pole
The 8161BP Mounting Box can be used with either a 1/2” pole or a 3/4” pole. The mount has a nut that will
need to be removed for a thicker pole.
Leave nut inserted for 1/2” poles.
Remove nut for 3/4” poles.
Either a 1/2” or 3/4” Conduit Set-Screw Connector will be needed to attach the mount to the pole.
1. Insert pole into the conduit connector.
Watcherprotect.com
♦
Watcher Products
♦
877-289-2824
7
2. Align the connector set-screw hole to the screw hole on the adjustable pole.
3. Secure with conduit set-screw.
4. Screw 8161BP Mounting Box to conduit connector.
Watcherprotect.com
♦
Watcher Products
♦
877-289-2824
8
5. If not already attached, attach SC5 to bottom of 8161BP and lock it into place with painted set screw.
6. The mounting kit is now connected to the telescoping pole. Using the existing screws, finish attaching
dome camera WP-7122 to the mount. *See SC5 manual for attaching camera to Cam-Kit.
Watcherprotect.com
♦
Watcher Products
♦
877-289-2824
9
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising