paper shredder

paper shredder
Service warranty card
The shredder enjoys free service during sevice warranty date in case of malfunction
even though following up the instruction manual and normal operation situation.
The service is void in following situation:
1 Without taking warranty card for repair.
2 The information filled in the warranty card is not conformity with the unit or
altered or omissed .
3 Negligent and incorrect operation or some natural disaster such as fire,
earthquake, windstorm, flood, electric shock, unnormal voltage, mice and
insects and bad environment which cause the malfunction and damage.
4 Damage and scratch , soack and water spray in transportation after purchase.
5 Some consumption parts such as battery, transformer, antenna, LCD and other
natural consumption materials and accessories.
6
Take apart the unit for self-repair and modify or the unit is sent to the third party
for repair.
7
Some force majeure ( fire, flood, earthquake, windstorm, electric shock, etc) cause
the damage.
PAPER SHREDDER
OPERATING INSTRUCTIONS
SC-U10
The warranty card is applied to free service in valid time, therefore the content in it is
not connected with the trading case and no right limited in law. It was regarded a
valid certification for free repair apply to consumer, no alter and forgery is allowed.
Purchase date for the card:
Customer name
Products
Telephone
Style
Address
To ensure your benefit and can enjoy the good service, please fill in above
information with dealer chop while purchasing, the certification will be void
without the dealer chop.
Expiry date is one year from the perchase date.
Keep the warranty card with care and you can submit the warranty card to the dealer
for repair in case of malfunction comes.
Many thanks for your choice for our products
Please read the instructional manual carefully before use.
IMPORTANT SAFEGUARD
Unique CD inlet safety design
Avoid the finger insert the CD hole to touch the shredder mouth, there is a safety design in
CD inlet for the machine. (refer to chart)
WARNING!
1.
2.
3.
NEVER insert hands or fingers into paper entry as serious personal injury may result.
THIS MACHINE IS NOT A TOY. Keep children and pets away from shredder at all times as serious
injury may result.
Keep loose objects (jewelry, long hair) away from shredder.These items and others like them may
cause serious injury if they accidentally fall into the paper entry.
CAUTION!
1.
2.
3.
4.
5.
6.
7.
8.
Do not exceed recommended sheet capacity.
Do not shred plasitic, adhesive labels, transparencies or cardboard.
This shredder is intended for paper only, Do not shred hard materials.
Do not place shredder near or over a damp or heat source to aviod shredder creepage.
Always turn off and unplug unit before moving and when not in use.
Never use flammable synthetic oil, petroleum-based or aerosol lubricants to oil the cutting
blades and body.
Do not use this product if it or the cord has been damaged to avoid the creepage danger.
Do not take apart the machine for self-repair to prevent electrical shock and will void your
warranty service
1.
To avoid the danger, push the switch button to OFF position when the machine is out of the work.
2.
Do not insert excessive paper into the entry per time and clips and other hard articles are also not
allowed in order to ensure the shredder's long life.
Put the paper into the entry vertically, the shredder will operation automatically and it will stop
automatically after work.
After the operation, push the power switch to OFF position.
3.
4.
Power Cord Care
1.
2.
3.
Please be noted that DO NOT shred the CD while shred paper, the operation must be separated.
Place the shredder in an easily accessible position to facilitate connects the power switch.
Do not place shredder on the pass way to avoid the passerby to step on it.
Do not place anything on the power cord.
There is a overheat equipment for the machine. After a long time shredding, the motor will be overheat
then stop automatically.
The shredder will start work automatically after 15 minutes for rest.
full paper
PARTS OF THE SHREDDER
CD inlet
Work circle
Overload
Overheat
power switch
BI NF UL L
OV
ER HE AT
Capacity of theshredding
OV ER LO
AD
10 sheets of paper(75g/M2 ); 1 Credit card or CD
PO WE R
ON /O FF
Type of the shredding
Cut shredding
Size of the shredding
4*26mm(width of paper); strip shape(credit card/CD)
R EV
Reverse
Forward
waste bin
Assembling:
Please fix waste bin into shredder body properly turn on the safety switch and
operation begins.
Using ways
There is a automatical switch inside, when the power turn on, put paper to the paper inlet to
touch the automatical switch, the shredder bein work. If shred credit card and CD, push the switch
button to REV position.
Release jam
1. It's very easy to cause jam if insert too much paper or insert paper not vertically, if jam occurred, the
machine will stop work.
2. push the switch button to ON/AUTO and REV position and move it come and go, the scrap entangled
on blade will be cleaned.
3. after cleaning the scrap, push the power button to AUTO postion and go on working, after the work,
push it to OFF postion.
Normal malfuntion and urgent settlement
Description
Settlement
1. check the power switch
The shredder is out
of work
2. if the power switch is in 'ON' position
3. if exceed the max. capacity of the paper or overheat
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising