Easycut 46

Easycut 46
Innovation !
Quality !
Value !
Easycut 46
Press from
Min. 50mm
x. 4
Max. 460
The world’s most advanced 46cm cutter at the world’s best
price. The totally new 46cm cutter offers copyshops all the
features previously found only on very large professional
machines that cost 1000’s more. Compare with the others:
full 46cm cutting table depth, others offer only 35cm, extra
deep 23cm front table for cutting longer sheets, others offer
only 15cm, electrically powered paper press, no more sheet
slippage when cutting glossy paper, other use a manual
press or weak springs, deepest cutting depth in its class up
to 5cm, other have only 3 or 4cm depth, servo controlled
backguage with 92 programs, with push out function! Others
have only manual backguage settings. HSS knife*, more than
12000 cutting cycles before regrinds! Full LCD display with
keyboard! Others only offer no display at all or as an expensive option. Overhanging front guard for extra long paper.
*HSS knife optional.
NTIL NV Geelseweg, 80 | 2250 | Olen | BELGIUM | Tel. +32 (0) 14 25 92 83 | henry.dumor@hotmail.com | www.dumor.eu
Innovation !
Quality !
Value !
- Fully guarded with infrared lighbars
- Digital display and keyboard and backguage position memory
- Full NC control
- Comes as standard with cabinet base included in price
- Precision welded and machined lower frame for accuracy and durability
- Hardened, tempered and ground blade, comes with easy to change spare cutting stick
- Easy to adjust knife stroke, no special tools needed
- Double guided cast steel and annealed blade carrier, heavy duty cast paper press and main cutting frame
- Push button fast advance and return of backguage, resettable reference point
- Full fast paper push out in about 6 sec
- Left side lay
- Illuminated cutting line, just like on large cutters
- Electric paper press applies even pressure for a more accurate cut
- Cast backguage with machined front and fingers
- Typical backgauge cutting accuracy better than 0.2 mm
- Easy to change blade, comes with paper knocking up tool
- Very low maintenance requirement
- Option fully mobile on casters
- Multi program module with 92 programs x 92 steps
Technical specifications
Dumor Easycut 46 MK2
Cutting width to 46 cm
Cutting length to 46 cm behind the blade plus up to 23 cm in front of the blade
Cut pile depth max 5 cm
Min cut length 5 cm
Min recommended cut step 1 mm
Backguage accuracy when new better than 0.2 mm on push out
Paper press pressure up to 15000N.
Illuminated cut line
Blade drive system heavy duty electric
Press drive system heavy duty electric with separate motor and drive (not springs!)
Backguage drive system by hi accuracy servomotor, full push out in about 6 sec.
Upper frame, blade carrier, press bar and backguage made from heavy cast iron, annealed and machined.
Lower body and cupboard made from tubular and sheet steel, powder coated.
Table working height
Overall height Depth Width Weight 900 mm approx
1300 mm
760 mm
660 mm
120 kg
Options: casters and HSS blade
Non contractual document, specifications subject to change without notice, errors and omissions excepted, copyright dumor 2008c
NTIL NV Geelseweg, 80 | 2250 | Olen | BELGIUM | Tel. +32 (0) 14 25 92 83 | henry.dumor@hotmail.com | www.dumor.eu
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF