cylindro 650 - Delray Lighting

cylindro 650 - Delray Lighting
CYLINDRO WHITE LED WITH OPAL ACRYLIC DIFFUSER
TYPE :
PROJECT:
ORDER NUMBER:
CYLINDRO PENDANT
• Canopy mounts to standard
3” mud ring
• Available in separate or central
mount (see drawings, right).
• Aluminum housing unlocks
with a screw for servicing.
• 6’ standard pendant, with push
button adjustable aircraft cable.
• Silver finish, with steel braided
power cord and opal acrylic
diffuser.
• Optional low voltage downlights available, for task lighting.
• cU.L. Listed for dry locations.
Red
1–120V
Blue
2–277V
SQ–RGB
6511.LO Central W30
6521.HO Central W35
6512.LO Separate W40
6522.HO Separate
Example:
6521.HO
Voltage
1–120V
2–277V
W35
1
Option
Downlight
BMR16 –50W MR16
BAR111–50W AR111
BMR16LED – 10W LED
BDIM-W1
BMR16 –50W MR16
BDIM-W2
BAR111–50W AR111
BDIM-W11 BMR16LED – 10W LED
BDMXMOD
BDIM-W2
BMR16LED
☐ BTRAXW – Traxon Light Drive, white* (order separately) Enter quantity:
☐ RBRD–red braided cord (see 2nd page).
6501–Red, Blue, SQ–RGB
6511– LO–white
6521– HO –white
Central Mount
LED DRIVERS
• Constant voltage, 100W/24V
universal for SQ –RGB DMX.
• 60W/12V driver for single color
(Red or Blue) LEds.
• Electronic drivers, DMX and
dimmer interface housed in
canopy or remote gear box for
easy access.
• Color LED options include
red and blue, as well as
RGB sequencing, controlled
with a DMX 512 interface
(BDMXMOD). Optional wall
box control offered separately
(see Traxon, back page.)
• cUL listed for dry locations.
9.1”
24”
6502–Red, Blue, SQ–RGB
6512– LO–white
6522– HO –white
Separate Mount
COLOR LEDs
9.1”
• Flexible 5050 universal voltage
LED tape light.
• 24V for SQ –RGB sequencer;
12V for single color
(Red or Blue) LEDs.
24”
BURBANK,
WHITE LEDs
Specify LED color:
W30 –White (3000º K)
W35 –White (3500º K)
W40–White (4000º K)
3.4”
9.25”
• Nichia Corp. NFSL757
linear board chips. LO = 6W per
foot; HO = 11.2W per foot.
• White color temperatures
include W30 (3000º K),
W35 (3500º K), and W40
(4000º K); matching the
traditional CCT of existing
incandescent, fluorescent,
and metal halide lamps.
• CRI: 90.0
•R9 ≥ 50.0
CALIFORNIA,
91505
W W W.
DELRAY
Cross Section
LIGHTING.
COM
SEPT 2016
white
LEDs
6501
6502
CYLINDRO 650
color
Model#
LED-LO
OPTIONS
LED-HO
6521L94W35
RGB OPTIONS
BDMXMOD
• Osram part no. OTDMXRGB
9.1”
9.1”
24”
24”
CP DISTRIBUTION
198
180°
CP DISTRIBUTION
150°
396
149
180°
150°
TRAXON LIGHT-DRIVE RGB
(order separately)
297
120°
99
120°
198
2
50
2
99
90°
50
99
198
60°
149
198
90°
99
1
1
60°
BTRAXW –white controller
• Standalone, wall-mounted
(12V power supply included)
DMX controller for RGB
LED that provides direct access
to fixtures.
• Tune color and brightness with
the Light-Drive wheel.
• See www.traxon-usa.com
for details.
297
30°
396
1–Vertical plane thru Horiz. 0 – 180°
2–Horiz. cone thru Vert. angle 85°
COEFFICIENTS
% CEILING 80 (20% FLOOR)
% WALL 70
50
30
0
1
2
3
4
5
6
7
8
9
10
supplied.
• DMX control interface for
RGB LED.
• Provides DMX control with
protocols that meet USITT
DMX-512A or DMX512
(DIN 56930-2). No converter
is required. DMX controls
by others.
• A second 4-conductor control
cable to fixture canopy is supplied.
107
95
85
76
69
63
57
53
49
45
42
107
89
76
65
57
50
44
39
36
32
29
107
84
68
56
48
41
35
31
27
24
22
30°
COEFFICIENTS
3500º K White LEDs
CRI: 90.0
Input Watts: 50W
Luminaire Lumens: 1,590
BMR16–50W MR16
BMR16LED–3.3W LED
Downlight
• For white LEDs only.
BDIM-W1
• 0–10V dimming to 10%.
•Utilizes 100W/24V, 0–10V
120/277 constant voltage driver.
• Use with 0–10V, purple/gray wire
analog dimmers; with low end
trim pot, and adjust low end
to above flicker threshold.
BDIM-W2
• 0–10V dimming to 1%.
• System utilizes 100W/24V,
120/277 constant voltage driver,
with the Eldo LIN211D1-LN
module.
• Required for use with digital
architecture/networking
systems like Acuity nLight,
Eaton Greengate, and similar
management systems.
BDIM-W11
• Lutron LD3096W24U
dimming driver module.
• 0.1% dimming and fade-to-off,
with Lutron dimming systems.
• For remote driver install only.
RED BRAIDED CORD
Red braided power cord.
Order RBRD.
% CEILING 80 (20% FLOOR)
% WALL 70
50
30
0
1
2
3
4
5
6
7
8
9
10
107
95
85
76
69
63
57
53
49
45
42
NOTES
6511L50W35
DOWNLIGHTS
1–Vertical plane thru Horiz. 0 – 180°
2–Horiz. cone thru Vert. angle 85°
DIMMING DRIVERS
107
89
76
65
57
50
44
39
36
32
29
107
84
68
56
48
41
35
31
27
24
22
NOTES
6521L94W35
3500º K White LEDs
CRI: 90.0
Input Watts: 94W
Luminaire Lumens: 3,180
BAR111-50W AR111
Downlight
AIRCRAFT CABLE
ACRYLIC DIFFUSER CLEANING
Note: Aircraft cable suspension
not recommended for outdoor
use, where fixture will be exposed
to water, or subject to wind
oscillation. Avoid use near HVAC
vents and in environments with
corrosive chemical vapors,
such as swimming pools.
Warning: Do not clean with
ammonia based cleaners
(e.g. Windex®). Use only water
or cleaners specifically formulated
for cleaning plastics.
SEPT 2016
6511L50W35
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising