5351TE - System Sensor Europe
Series 300
CONVENTIONAL -58 °C Fixed Temperature Thermal Detector
Model 5351TE
Low profile design
Low current draw
Backward compatible with Series 100 detector range of bases
Wide operating voltage 8 to 30VDC
Bi-colour LED detector status indicator
Programmable sensitivity
Addressable feature
Advanced maintenance features via remote hand-held test unit
Range of detector bases available
Tested and approved to EN54 –
5:2000 Class A2S (Amendment 1)
Extended warranty
The 5351TE thermal detector forms part of the Series
300 range of conventional detectors. This range of
detectors has been produced using the latest in
manufacturing and design techniques, pushing out the
boundaries of existing conventional detector technology.
With its multitude of innovative features, the Series
300 is a detector which ‘acts conventionally, thinks
The remote hand-held programming unit can also
be used in conjunction with the Series 300 range of
detectors to gain access to other advanced features. The
features available include: read/write last maintenance
date, read value of thermal element and perform an
alarm test. Each unit can be given a unique address that
will be displayed on the S300ZDU whenever the detector
is in alarm.
The 5351TE thermal detector incorporates an Application
Specific Integrated Circuit (ASIC). Combined with the
latest in thermal element technology the detector
provides efficient and accurate detection of fires,
especially in environments such as boiler houses or
kitchens where smoke detectors are inappropriate due to
the high level of airborne contamination.
All the features via the hand-held programming unit are
achieved effectively and effortlessly without the need
to remove the detector or having to gain direct physical
access (other than by the use of ‘No Climb Products’ or
similar servicing tool), saving valuable commissioning/
maintenance time.
The 5351TE and other detectors in the Series 300 range
are backward compatible with the Series 100 detector
bases, thus providing the capability to upgrade, extend
and maintain existing Series 100 installations.
The 5351TE detector incorporates a bi-colour LED
indicator. The integral LED changes colour according to
the detector’s status - Green = Normal, Red = Alarm.
This benefits the user by providing clear, instant visual
indication of the detector’s condition. The Green LED can
be programmed for blink/no blink operation.
They provide the end user with the confidence to know
that his system is being regularly serviced and that it is
operating at its optimum level, with minimum disruption
to his own business activities.
Architect/Engineer Specifications
5351TE 58°C Temperature Thermal Detector
In addition to the comprehensive programming tool, a simple laser based alarm test unit is also available. The coded signal transmitted by this device can instruct the
detector to generate a full alarm condition at a range of up to 5 metres from the detector, and is an ideal tool for initial commissioning and routine system testing.
A variety of detector bases can be used with the 5351TE detector, providing application flexibility and compatibility with a wide range of Fire Alarm Control Panels. All bases
are fitted with a shorting spring to permit circuit testing prior to fitting the detector and have a tamper resistant feature, which when activated prevents removal of the
detector without the use of a tool.
All System Sensor products are covered by our extended 3 year warranty.
Electrical Specifications
Operating Voltage Range
8 to 30VDC (Nominal 12/24VDC)
Typical Standby Current @ 25°C
60µA @ 24VDC (LED no blink)
Maximum Alarm Current (LED On)
80mA @ 24VDC (Limited by panel)
Environmental Specifications
Application Temperature Range
-30°C to +70°C
5 to 95% Relative Humidity (non condensing)
Mechanical Information
48mm (plus 9mm for B401 base)
105g (plus 60g for B401 base)
Max Wire Gauge for Terminals
0.75mm2 to 2.5mm2
Pantone Warm Grey 1C
Bayblend FR110
Product Range
Compatible Bases (see notes)
B401 Standard Base B401SD Standard base with schotty diode
B401R Resistor base with 470 ohm resistor B401RSD Standard base with 470 ohm resistor and Shottky diode
B401RM Standard recess base with 470 ohm resistor B401DG Deep base
B401DGR Deep base with 470 ohm resistor B401DGSD Deep base with Shottky diode
B312NL 12V non-latching relay base B312RL 12V latching relay base
B324RL 24V latching relay base
S300RPTU Remote Programming and Test Unit S300RTU Remote Test Unit
S300SAT Remote Programming Interface Unit S300ZDU Zonal Display Unit
Other Devices in range 2351E, 4351EM, 5351E
Bases with other resistor values are available to suit the requirements of most Fire Alarm Control Panels.
System Sensor Europe (Technical Services)
Charles Avenue
Burgess Hill
RH15 9TQ
United Kingdom
Tel: +44 (0)1444 238820
Fax: +44 (0)1444 248123
Email: sse.technical@systemsensor.com
Copyright © 2005 System Sensor. All rights reserved.
All technical data is correct at time of publication and is subject to change without notice. All trademarks acknowledged.
Installation information: in order to ensure full functionality, refer to the installation instructions as supplied.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF