B35D I B40D I B45D I B50D Articulated Dump Trucks

B35D I B40D I B45D I B50D Articulated Dump Trucks
D-series
B35D I B40D I B45D I B50D
MkVII
Articulated Dump Trucks
Get more from
your truck
If you’re looking to deliver more to
your bottom line, choose Bell
Articulated Dump Trucks.
These D-series ADTs handle heaped payloads with faster cycle times
and best-in-class fuel efficiency - so you’ll move more material at
lower cost. They’re highly reliable too, with high-strength, welded-alloy
steel chassis and components that are durable and optimized to
reduce unnecessary weight. And with their oscillating frame joint,
articulated steering and high-floatation tires, these hard working
haulers won’t let wet weather or steep grades dampen your plans.
Extensive use of high-strength,
lightweight materials gives these trucks
the best payload-to-mass ratios and
hauling efficiencies in each class.
With their oscillating frame and
high-floatation tires, Bell trucks won’t
leave you stuck on muddy, rutted or
hilly terrain.
The redesigned sound-suppressed cab
features fatigue-beating controls,
advanced diagnostic monitor and a
sealed-switch module for convenient,
fingertip operation of numerous
functions.
Fuel-efficient emission-certified
engines deliver clean power without
compromise in all conditions. Leadingedge emissions technology ensures
rapid engine response and
dependable cold-start performance.
Specifications
B35D
B40D
B45D
B50D
295 kW (396 hp)
335 kW (449 hp)
375 kW (503 hp)
375 kW (503 hp)
Unladen
28,230 kg (62,236 lb)
29,850 kg (65,808 lb)
32,980 kg (72,708 lb)
34,520 kg (76,104 lb)
Laden
60,730 kg (133,887 lb)
66,851 kg (147,381)
73,980 kg (163,098 lb)
79,920 kg (176,193 lb)
20,5 m3 (27 yd3)
23 m3 (30 yd3)
25,5 m3 (33,5 yd3)
28 m3 (37 yd3)
32,500 kg (71,650 lb)
37,000 kg (81,571 lb)
41,000 kg (90,390 lb)
45,400 kg (100,090 lb)
Gross power Operating mass
2:1 heaped capacity
Rated payload
2
Enhancements such as industry leading standards in fuel-efficient
emission control, solid state electrical system, spacious cab with refined controls and you have
everything you need to maximise uptime and productivity.
3
Haul of
Fame
Transfer case inter-axle differential
delivers equal torque to each axle when
traction is favorable. When conditions
get ugly, engage the diff-lock on the go
to deliver torque to the tires that can best
use it.
The central oscillation joint, high
suspension travel on all axles, and
balanced weight distribution provide
the agility and ability to navigate hostile
terrain.
Front-suspension damping helps
minimize vibration, while the centremounted seat reduces the roll often
experienced in off-road conditions - for
comfortable productivity.
Optional tailgate is available for better
material retention. The tailgate opens as
the bin is raised for dumping. Tie-down
straps maintain positive seal throughout
haul, ensuring minimal material is lost.
The best-in-class payload-to-weight
ratio means that more of your fuel cost
is spent moving the material, not the
machine - decreasing your cost per
tonne.
Automatic retardation slows the
truck when the operator backs off
the accelerator pedal - for more
confidence on steep grades and
enhanced brake life.
4
4
An industry leading, fully automatic
six-speed planetary transmission with
torque converter lock up maximizes
fuel efficiency.
Fully automated controlled traction
differentials and transfer case diff-lock
provide a traction boost in poor
underfoot conditions.
Electronic unit injection fuel system
provides high injection pressures even
at low engine speed for improved coldstarting ability, low-speed response,
and reduced emissions.
High-travel suspension keeps all tires in
constant ground contact for optimum
traction.
Bell ADTs give you the competitive edge. Boasting faster haul cycles and industry-
leading fuel economy, they move material at the lowest cost per tonne of any comparable-size truck.
Best in-class payload-to-mass ratio gives you more power and agility to carry the load, for maximum
productivity and profitability. What really sets these apart from other material movers is their ability to
thrive on rough terrain, steep grades and mud. Try one to appreciate the difference.
5
Nothing’s built
as strong as a Be
Built smarter to work harder, these
lean machines boast the materialmoving muscle you need without the
mass to feed.
Their lower mass reduces powertain and structural stress. Other
uptime-boosting features include enhanced diagnostics, solid-state
sealed switches and re-inforced articulation joints to list but a few.
When you know how they’re built, you’ll run a Bell.
Planetary powershift transmission
optimizes shift points and protects the
transmission from operator error and
abuse. Thicker clutch plates, generous
lubrication flow, and heavy-duty cooling
ensure long life.
6
The high-strength steel chassis delivers
strength and rigidity without excess weight.
High-strength steel and widely spaced
taper roller bearings in the articulation
area enhance long-term durability.
Rough terrain demands tough suspensions. Heavy-duty components absorb shocks
and come back for more. You get best-in-class ground clearance, too.
ell
Efficient viscous direct-drive engine
fans in all Bell trucks provide engine
and charge-air cooling.
Fully enclosed, dual circuit wet disc
brakes offer superior braking
performance and extended service life
essential for wet and muddy
conditions. Oil-immersed wet-disc
brakes are virtually maintenance-free.
Class leading engine braking coupled
with automated transmission
retardation provides superior braking
power and reduces service brake wear.
Intelligent traction control provides
superior traction in poor underfoot
conditions.
Hydraulic, transmission and transfer
case oil coolers employ a hydraulically
driven fan that runs only as needed or
when engine loading is low, helping
conserve power and fuel.
7
Bringing you
tomorrow’s
technology
today
A combination of an optimally tuned engine
and weight optimized complete machine
package ensure that Bell ADTs have a minimal
carbon footprint.
• AdBlue™ is non-toxic, odorless and simple to refill.
• AdBlue™ is injected into the flow of the exhaust gases and reacts with
the NOx gases in the catalytic convertor to form harmless Nitrogen and
water.
• Field tests on the new Blu@dvantageTM system show up to 15% saving
in fuel over previous Bell ADTs.
• AdBlue™ usage is approximately 3-5% of your fuel usage.
Reduced emissions
Improved engine efficiency
Lower fuel consumption
Improved power
Improved torque
8
Improved engine response
Bell Equipment is an industry leader in fuel-efficient emission
control with the introduction of SCR-technology (Selective Catalytic
Reduction) to be compliant to Stage IIIB & Tier 4i emission standards.
Called Bell Blu@dvantageTM, it is an SCR package designed specifically
for the off-highway market.
With SCR technology customers are able to reduce harmful Nitrogen Oxides while being able to save on
fuel. So Blu@dvantageTM is not just healthy for the environment; it’s healthy for your wallet too.
9
Built for Comfort
What operator wouldn’t want to climb behind the wheel of a Bell
ADT?
It’s spacious, quiet, climate-controlled cab is loaded with productivity-boosting comfort and
convenience features that rival some SUVs.
From the state-of-the-art multifunction monitor and fully customizable controls to air-suspension seat,
tilt/telescoping steering wheel and optional CD player with high-output speakers, the D-series provides
everything your operators need to perform at their best. Unparalleled comfort.
Our innovative
Comfort Ride System...
...is available as an option to even further enhance ride comfort by ensuring minimal whole body vibration
exposure. Productivity increases, through increased cycle times, and reduced haul road maintenance are even
10
further benefits of the simple, but extremely successful system. Long haul cycles with rough, hard roads will see
maximum benefit, especially on the unladen run.
• An intuitive monitor reveals vital
operating information, detailed
diagnostic readings of sensors and
switches and dump body
function settings.
• Convenient sealed switch module
provides fingertip control of numerous
productivity enhancing functions
including: Dump body upper limit.
Soft stop / hard stop selection,
I-Tip and Speed Control.
• Who says you can’t take it with
you? There’s a place for a coffee cup,
in-door storage for an insulated flask
or other carry-ons, and even a hot/
cold box for refreshments.
Easy-to-understand instruments and intuitive controls wrap around the operator
so they’re easier to view and operate.
A fully adjustable air-suspension seat is optimally positioned behind the front
axle to help smooth out the ride when the going gets rough.
You won’t find retarder pedals or levers in a Bell truck. Retarder aggressiveness
is simply set on the switch pad. Everything else is automatic.
The adaptive transmission control adjusts clutch engagement to ensure
smooth, consistent shifts throughout the life of the truck.
A heavy-duty bi-level climate-control system with automotive-style louvres
keeps the glass clear and cab comfortable.
The spacious suspension seat and a comprehensive mirror package provide
exceptional all-around visibility.
The standard sound-suppression package significantly reduces noise levels and
operator fatigue.
The front suspension consists of an A-frame layout, supported by two
independent hydro-pneumatic suspension struts. The spring rate and
damping is optimally tuned for a perfect combination of machine comfort
and safe handling experience.
The Comfort-Ride option offers dual stage rubber blocks, which change
the suspension characteristics to best match the laden and unladen haul
cycles to maximise operator comfort.
11
Safety is our Busi
too
The exclusive on-board weighing option presents the operator with real time
information on the payload while the machine is being loaded. A ‘speed restriction’
mode can also be activated if the machine is significantly over-loaded.
The park brake automatically applies when neutral is selected and it is not possible to engage neutral at speed. Torque dependent park brake release (hill assist)
ensures no roll back on slopes.
12
iness
By listening to our
customers and
reacting quicker to a
changing workplace
we provide a vehicle
that exceeds
application
safety standards.
• Keyless start, driver identity, and access
codes ensures no unauthorized operation
of your equipment.
• The incorporation of a Pitch and Roll
sensor in the vehicle allows the bin to not
be operated if the truck is in an unsafe
position.
• Both operator or site selectable maximum
speed control allows the vehicle to
automatically de-accelerate and apply the
retarder to prevent onsite speeding.
• Our quiet operator cabins are ROPS/
FOPS certified with air suspension operator
seat. Both operator and trainer seat have
retractable lap belts with automatically
locking retractors.
• Reverse cameras are available for factory
or on site fitment ensuring full view when
reversing.
The best in class retarder and engine
braking automatically applies when the
operator lifts his foot off the accelerator.
Retarder aggressiveness can be simply
adjusted on the sealed switch module
ensuring maximum descent control for
all conditions.
All trucks can be set up to
automatically sound the horn when
starting or switching between forward
and reverse.
• Full hand-rails (to ISO 2876) can be
installed to provide even more safety when
performing engine checks.
13
Here’s the lowdow
daily operating cos
You won’t have to dig deep to uncover the many ways we’ve simplified
service and made the D-series less expensive to maintain.
Easy-to-reach dipsticks, see-through reservoirs, sight gauges and grouped service points make quick work of
the daily routine. High-hour oil and filter change intervals reduce costs and planned downtime. Quick-change
filters and extended engine and hydraulic oil-service intervals reduce costs and provide more uptime. Plus, an
advanced diagnostic monitor and diagnostic test ports help you troubleshoot problems and make informed
maintenance decisions.
wn on
sts
The load-sensing hydraulic system
was designed with simplicity in mind
while maintaining efficiency. Fewer
components result in greater reliability
and service ease.
• If something goes wrong, the
diagnostic monitor provides
service codes and supporting
info to help you quickly
pinpoint the problem.
• The cab can be tilted without
special tools in minutes, for
convenient service access to
drivetrain components.
Extended engine transmission and
hydraulic oil-change for increased
uptime and lower operating cost.
The engine dipstick and oil fill, oil and
fuel filters and coolant reservoir are
readily accessible.
Available environmental drains allow
quick, no-spill changes.
Your Bell Service Centre has the parts
and backup you need to stay productive
and offers a wide variety of preventative
maintenance and support programmes
to help you control costs.
• An in-cab load centre simplifies
fuse replacement. Fewer
relays, connectors and
harnesses mean higher
reliability.
• See-through fluid reservoirs and
sight gauges let you check
fluid levels at a glance.
• Easily accessible test ports
allow technicians to
troubleshoot problems
more quickly.
• The centralised lube bank
places difficult-to-reach nipples
within reach for easy access.
The convenient lube chart
helps ensure that nothing
gets overlooked.
15
Where ever you
are...
Planning and Monitoring
Complete Training Solutions
Financing Options
Project Analysis and Solutions
Repair and
Maintenance Contracts
Machine and Component Rebuilds
Complete Service and Support
Complete Parts Supply
Through our own network as well as approved dealers and strategic
alliances we ensure supply and support to the global market.
Develop a lasting and meaningful partnership with Bell Equipment through Bell Assure, your tailor-made
support structure furnished with all the after-sales tools you need to give you best value, peace of mind and a
unique after-sales experience.
16
...we have you
covered
Smarter fleet
management
Cutting edge technology, helping you run your fleet smarter. Providing
accurate, up-to-date operational data, production data and diagnostic data.
Machine operational data is processed and compiled into useful production and performance statistics, accessible
via the Bell Fleetm@tic website. These reports are also automated and emailed directly to you. The key to a
productive and profitable fleet, lies in the ability to monitor and manage your machines and operators efficiently.
Fleetm@tic:
Maximise productivity
Receive machine health data
Generate machine utilisation reports
Implement safety features
Identify operator training requirements
Protect investments
Pro-active maintenance planning
Receive real time geospatial data
17
Technical Data - B35D
Engine
Mercedes Benz V6, turbocharged,
intercooled, low emission diesel
engine.
Gross Power
295 kW (396 hp) @ 1,800 rpm
Net Power
288 kW (386 hp) @ 1,800 rpm
Torque
2,000 Nm (1,475 lbft) @ 1,300 rpm
Displacement
11,95 liters (729 cu.in)
Fuel Tank Capacity
445 liters (118 US gal)
Auxiliary Brake
Automatic exhaust brake
Engine Valve Brake (EVB)
AdBlue™ Tank Capacity
40 l (11 US gal)
Certification
OM 501 LA meets EU Stage IIIB/EPA
Tier 4i emissions regulations.
Transmission
Fully automatic Allison planetary
transmission.
Layout
Engine mounted
Gear Layout
Constant meshing planetary gears,
clutch operated.
Gears
6 Forward, 1 Reverse
Clutch Type
Hydraulically operated multi-disc
Control Type
Electronic
Torque Control
Hydrodynamic, with lock-up in all
gears.
Transfer Box
Remote mounted
Electrical System
Voltage
24 V
Front Suspension
Semi-independent, leading A-frame
supported by hydro-pneumatic
suspension struts.
Manufacturer
Bell VGR
Model
17 100
Battery Type
Two maintenance free permanently
sealed.
Rear Suspension
Pivoting walking beams with
laminated rubber suspension blocks.
Layout
Three in-line helical gears
Output Differential
Interaxle 33/67 proportional
differential, Pneumatically lockable on
the move.
Hydraulic System
Variable displacement with load
sensing system incorporating a
ground driven emergency steering
pump.
Axles
High strength steel fabricated with
spiral bevel type gears on the
Controlled Traction differential and
heavy duty outboard planetary gears.
Flow
300 l/min (79,26 gal/min)
Model
Bell 25T
brakiNG system
Service Brake
Dual circuit, full hydraulic actuation
wet disc brakes on front and middle
axles.
Maximum Brake Force
278 kN (62,344 lbf)
Park & Emergency
Spring applied, air released driveline
mounted disc.
Maximum Brake Force
440 kN (98,920 lbf)
Auxiliary Brake
Automatic exhaust brake
Engine Valve Brake (EVB)
Adjustable Hydraulic retarder.
Maximum Retardation
721 kW (967 hp)
Battery Capacity
2 X 105 Ah
Alternator Rating
28 V 80 A
Vehicle Speeds
1st
8 km/h
2nd
17 km/h
3rd
24 km/h
4th
37 km/h
5th
48 km/h
6th
54 km/h
R
6,3 km/h
Pressure
25 Mpa (3,626 psi)
Filter
5 microns
5 mph
10,6 mph
15 mph
23 mph
30 mph
33,8 mph
3,9 mph
Cab
ROPS/FOPS certified
75 dBA internal sound level measured
according to ISO 6396.
Steering System
Hydrostatically actuated by two
double acting cylinders, with grounddriven emergency steering pump.
Lock to lock turns
4,7
Steering Angle
42º
Dumping System
Two double-acting, single stage,
dump cylinders.
Raise Time
13 s
Lowering Time
7,6 s
Tipping Angle
70º
Wheels
Type
Radial Earthmover
Pneumatic System
Air drier with heater and integral
unloader valve, serving park brake
and auxiliary functions.
Tire
26.5R25
System Pressure
810 kPa (117 psi)
Load Capacity & Ground Pressure
GROUND PRESSURE
OPERATING WEIGHTS
OPTION WEIGHTS
LADEN (No sinkage)
kPa (Psi)
BODY m (yd )
Front
14,120 (31,129)
Front
306 (44)
Struck Capacity
16 (21)
Bin liner
1,119 (2,467)
Middle
7,060 (15,565)
Middle
336 (49)
SAE 2:1 Capacity
20,5 (27)
Tailgate
947 (2,088)
Rear
7,050 (15,543)
Rear
336 (49)
SAE 1:1 Capacity
24,5 (32)
Extra wheelset
714 (1,574)
Total
28,230 (62,236)
UNLADEN
kg (lb)
LADEN
18
LOAD CAPACITY
3
3
SAE 2:1 Capacity
LADEN (With sinkage) with Autogate
21 (27,5)
Front
18,350 (40,455)
Front
196 (28)
Middle
21,195 (46,727)
Middle
217 (31)
Rated Payload
32,500 kg
Rear
21,185 (46,705)
Rear
217 (31)
(71,650 lb)
Total
60,730 (133,887)
kg (lb)
Dimensions
7085 (23'3")
6148 (20'2")
3215 (10'7")
WHEEL WIDTH
1430 (4'8")
550
(1'10")
1950 (6'5")
501
(1'8")
652
(2'2")
29°
4470 (14'8")
3820 (12'6")
3723 (12'3")
1476 (4'10")
886
(2'11")
1424 (4'8")
2303 (7'7")
70°
2541 (8'4")
TREAD WIDTH
1600 (5'3")
2615 (8'7")
2734 (8'12")
INNER BIN WIDTH
10467 (34'4")
OVERALL LENGTH
NOTE:
ALL DIMENSIONS SHOWN ARE UNLADEN VALUES.
FOR ILLUSTRATIVE PURPOSES, AN AVERAGE
TYRE DEFLECTION HAS BEEN TAKEN.
42°
R9132 (R29'12")
OUTSIDE TURNING RADIUS
NVM
28,230 kg
62,236 lb
1.Determine tractive resistance by finding intersection of
vehicle mass line and grade line. NOTE: 2% typical rolling
resistance is already assumed in chart and grade line.
2.From this intersection, move straight left across charts until
line intersects rimpull curve.
3.Read down from this point to determine maximum speed
attained at that tractive resistance.
GVM
60,730 kg
133,887 lb
Total Resistance = % Grade + % Rolling resistance
Gradeability / Rimpull
Gross Tractive Effort [kN]
R5055 (R16'7")
INSIDE TURNING RADIUS
518 (1'8")
5601 (18'5")
3018 (9'11")
3056 (10')
BIN WIDTH
523 (1'9")
GROUND TO AXLE
771 (2'6")
GROUND TO BELLY PLATE
3689 (12'1")
TOTAL WIDTH
MIRROR TO MIRROR
Mass (kg)
NVM
28,230 kg
62,236 lb
Gross Retardation Force [kN]
1.Determine retardation force required by finding intersection of
vehicle mass line.
2.From this intersection, move straight left across charts until
line intersects the curve. NOTE: 2% typical rolling resistance
is already assumed in chart.
3.Read down from this point to determine maximum speed.
GVM
60,730 kg
133,887 lb
Total Resistance = % Grade - % Rolling resistance
Retardation
Speed [Kmph]
Mass (kg)
Speed [Kmph]
19
Technical Data - B40D
Engine
Mercedes Benz V6, turbocharged,
intercooled, low emission diesel
engine
Gross Power
335 kW (449 hp) @ 1,800 rpm
Net Power
325 kW (436 hp) @ 1,800 rpm
Torque
2,100 Nm (1,549 lbft) @ 2,200 rpm
Displacement
11,95 liters (729 cu.in)
Fuel Tank Capacity
300 liters (79,26 US gal)
Auxiliary Brake
Automatic exhaust brake
Engine Valve Brake (EVB)
AdBlue™ Tank Capacity
40 l (11 US gal)
Certification
OM 501 LA meets EU Stage IIIB/EPA
Tier 4i emissions regulations.
Transmission
Fully automatic Allison planetary
transmission.
Layout
Engine mounted
Gear Layout
Constant meshing planetary gears,
clutch operated.
Gears
6 Forward, 1 Reverse
Clutch Type
Hydraulically operated multi-disc.
Control Type
Electronic
Torque Control
Hydrodynamic, with lock-up in all
gears.
Transfer Box
Remote mounted
Electrical System
Voltage
24 V
Front Suspension
Semi-independent, leading A-frame
supported by hydro-pneumatic
suspension struts.
Manufacturer
Bell VGR
Model
17 100
Battery Type
Two maintenance free permanently
sealed.
Rear Suspension
Pivoting walking beams with
laminated rubber suspension blocks.
Layout
Three in-line helical gears.
Output Differential
Interaxle 33/67 proportional
differential, Pneumatically lockable on
the move.
Hydraulic System
Variable displacement with load
sensing system incorporating a
ground driven emergency steering
pump.
Axles
High strength steel fabricated with
spiral bevel type gears on the
Controlled Traction differential and
heavy duty outboard planetary gears
Flow
300 l/min (79,26 gal/min)
Model
Bell 25T
brakiNG system
Service Brake
Dual circuit, full hydraulic actuation
wet disc brakes on front and middle
axles.
Maximum Brake Force
263 kN (59,125 lbf)
Park & Emergency
Spring applied, air released driveline
mounted disc.
Maximum Brake Force
440 kN (98,920 lbf)
Auxiliary Brake
Automatic exhaust brake
Engine Valve Brake (EVB)
Adjustable Hydraulic retarder.
Alternator Rating
28 V 80 A
Vehicle Speeds
1st
8 km/h
2nd
17 km/h
3rd
24 km/h
4th
37 km/h
5th
48 km/h
6th
54 km/h
R
6,3 km/h
Pressure
25 Mpa (3,626 psi)
Filter
5 microns
5 mph
10,6 mph
15 mph
23 mph
30 mph
33,8 mph
3,9 mph
Cab
ROPS/FOPS certified
75 dBA internal sound level measured
according to ISO 6396.
Steering System
Hydrostatically actuated by two
double acting cylinders, with grounddriven emergency steering pump.
Lock to lock turns
4,7
Steering Angle
42º
Dumping System
Two double-acting, single stage,
dump cylinders
Raise Time
13 s
Lowering Time
7,6 s
Maximum Retardation
721 kW (967 hp)
Tipping Angle
70º
Wheels
Type
Radial Earthmover
Pneumatic System
Air drier with heater and integral
unloader valve, serving park brake
and auxiliary functions.
Tire
29.5R25
Battery Capacity
2 X 105 Ah
System Pressure
810 kPa (117 psi)
Load Capacity & Ground Pressure
GROUND PRESSURE
OPERATING WEIGHTS
OPTION WEIGHTS
LADEN (No sinkage)
kPa (Psi)
BODY m (yd )
Front
14,650 (32,298)
Front
242 (35)
Struck Capacity
18,5 (24)
Bin liner
1,222 (2,694)
Middle
7,810 (17,218)
Middle
302 (44)
SAE 2:1 Capacity
23 (30)
Tailgate
1,002 (2,209)
Rear
7,390 (16,292)
Rear
302 (44)
SAE 1:1 Capacity
27,5 (36)
Total
29,850 (65,808)
UNLADEN
kg (lb)
LADEN
20
LOAD CAPACITY
3
3
SAE 2:1 Capacity
LADEN (With sinkage) with Autogate
24 (31,5)
Front
19,587 (43,181)
Front
171 (25)
Middle
23,842 (52,563)
Middle
201 (29)
Rated Payload
37,000 kg
Rear
23,422 (51,637)
Rear
201 (29)
(81,571 lb)
Total
66,851 (147,381)
Extra wheelset
kg (lb)
937 (2,066)
Dimensions
3264 (10'9")
BIN WIDTH
7219 (23'8")
6194 (20'4")
803
(2'8")
30°
556
(1'10")
3357 (11')
WHEEL WIDTH
1950 (6'5")
4471 (14'8")
3855 (12'8")
3756 (12'4")
1600 (5'3")
2615 (8'7")
10487 (34'5")
OVERALL LENGTH
2920 (9'7")
INNER BIN WIDTH
624 1450 (4'9")
(2'1")
1526 (5')
937
(3'1")
1600 (5'3")
2378 (7'10")
70°
2606 (8'7")
TREAD WIDTH
NOTE:
ALL DIMENSIONS SHOWN ARE UNLADEN VALUES.
FOR ILLUSTRATIVE PURPOSES, AN AVERAGE
TYRE DEFLECTION HAS BEEN TAKEN.
42°
R4984 (R16'4")
INSIDE TURNING RADIUS
492 (1'7")
5645 (18'6")
3190 (10'6")
576 (1'11")
GROUND TO AXLE
824 (2'8")
GROUND TO BELLY PLATE
3689 (12'1")
TOTAL WIDTH
MIRROR TO MIRROR
R9203 (R30'2")
OUTSIDE TURNING RADIUS
Gradeability / Rimpull
NVM
29,850 kg
65,808 lb
GVM
66,851 kg
147,381 lb
NVM
29,850 kg
65,808 lb
GVM
66,851 kg
147,381 lb
1.Determine tractive resistance by finding intersection of
vehicle mass line and grade line. NOTE: 2% typical rolling
resistance is already assumed in chart and grade line.
2.From this intersection, move straight left across charts until
line intersects rimpull curve.
3.Read down from this point to determine maximum speed
attained at that tractive resistance.
Retardation
1.Determine retardation force required by finding intersection of
vehicle mass line.
2.From this intersection, move straight left across charts until
line intersects the curve. NOTE: 2% typical rolling resistance
is already assumed in chart.
3.Read down from this point to determine maximum speed.
21
Technical Data - B45D
Engine
Mercedes Benz OM502LA, V-8,
Turbocharged and intercooled.
Gross Power
375 kW (503 hp) @ 1,800 rpm
Net Power
364 kW (488 hp) @ 1,800 rpm
Torque
2,400 Nm (1,770 lbft) @ 1,200 rpm
Output Differential
Interaxle 33/67 proportional differential,
pneumatically spring lockable whilst
stationary or on the move.
Axles
High strength steel fabricated
with spiral bevel type gears on the
Controlled Traction differential and
heavy duty outboard planetary gears.
Final drive type
Outboard heavy duty planetary on
all axles.
Displacement
15,93 liters (972 cu.in)
Fuel Tank Capacity
575 liters (152 US gal)
Housing type
Steel fabricated
AdBlue™ Tank Capacity
66 l (17 US gal)
Certification
OM 502 LA meets EU Stage IIIB/EPA
Tier 4i emissions regulations.
Transmission
Fully automatic planetary transmission
with integral retarder.
brakiNG system
Service Brake
Dual circuit, full hydraulic oil immersed
wet multidisc brakes on all three
axles.
Maximum Brake Force
395 kN (88,583 lbf)
Layout
Engine mounted
Park & Emergency
Spring applied, air released driveline
mounted disc.
Gear Layout
Constant meshing planetary gears,
clutch operated.
Maximum Brake Force
440 kN (98,920 lbf)-Static
105 kN (23,605 lbf)-Dynamic
Gears
6 Forward, 1 Reverse
Auxiliary Brake
Automatic exhaust brake
Engine Valve Brake (EVB).
Clutch Type
Hydraulically operated multi-disc
Control Type
Electronic
Torque Control
Hydrodynamic, with lock-up in all
gears.
Transfer Box
Manufacturer
Bell VGR
Model
17 100
Tire
29.5R25
Tipping Angle
70º standard, or any lower angle
programmable.
Front Suspension
Semi-independent, leading A-frame
supported by hydro-pneumatic
suspension struts.
Pneumatic System
Air drier with heater and integral
unloader valve, serving park brake
and auxiliary functions.
System Pressure
810 kPa (117 psi)
Rear Suspension
Pivoting walking beams with
laminated rubber suspension blocks.
Electrical System
Voltage
24 V
Hydraulic System
Variable displacement with load
sensing system serving the prioritized
steering, body tipping, suspension
and brake functions. A ground-driven,
load sensing emergency steering
pump is integrated into the main
system.
Battery Type
Two maintenance free permanently
sealed.
Battery Capacity
2 X 105 Ah
Alternator Rating
28 V 80 A
Pump Type
Variable displacement, loadsensing
piston.
Filter
5 microns
Vehicle Speeds
1st
7 km/h
2nd
14 km/h
3rd
21 km/h
4th
31 km/h
5th
41 km/h
6th
47 km/h
R
7 km/h
RETARDATION system
Engine Brake
Automatic exhaust brake and Engine
Valve Brake (EVB)
Steering System
Hydrostatically actuated by two
double acting cylinders, with grounddriven emergency steering pump.
Cab
ROPS/FOPS certified
74 dBA internal sound level measured
according to ISO 6396.
Maximum Retardation Power
345 kW (463 hp)
Angle
42º
Transmission Retarder
Integral hydrodynamic, output shaft
speed dependant, six selectable
levels of retardation
Lock to lock turns
4,2
Total Retardation Power
797 kW (1,069 hp)
Layout
Three in-line helical gears
Power Down Time
9.9 s (60º tip angle)
Wheels
Type
Radial Earthmover
Flow
350 l/min (93 gal/min)
Pressure
25 Mpa (3,626 psi)
4 mph
9 mph
13 mph
19 mph
25 mph
29 mph
4 mph
Dumping System
Two double-acting, single stage,
dump cylinders.
Raise Time
11.2 s (60º tip angle)
Load Capacity & Ground Pressure
GROUND PRESSURE
OPERATING WEIGHTS
OPTION WEIGHTS
LADEN (No sinkage)
kPa (Psi)
BODY m (yd )
Front
17,230 (37,986)
Front
275 (40)
Struck Capacity
20 (26)
Bin liner
1,360 (2,998)
Middle
7,890 (17,395)
Middle
340 (49)
SAE 2:1 Capacity
25,5 (33,5)
Tailgate
1,076 (2,372)
Rear
7,860 (17,328)
Rear
340 (49)
SAE 1:1 Capacity
31 (41)
Total
32,980 (72,708)
UNLADEN
kg (lb)
LADEN
22
LOAD CAPACITY
3
3
SAE 2:1 Capacity
LADEN (With sinkage) with Autogate
26,5 (35)
Front
21,190 (46,716)
Front
189 (27)
Middle
26,410 (58,224)
Middle
230 (33)
Rated Payload
41,000 kg
Rear
26,380 (58,158)
Rear
230 (33)
(90,390 lb)
Total
73,980 (163,098)
Extra wheelset
kg (lb)
937 (2,066)
Dimensions
NOTE:
ALL DIMENSIONS SHOWN ARE UNLADEN VALUES.
FOR ILLUSTRATIVE PURPOSES, AN AVERAGE
TYRE DEFLECTION HAS BEEN TAKEN.
NVM
32,980 kg
72,708 lb
Gradeability / Rimpull
GVM
73,980 kg
163,098 lb
1.Determine tractive resistance by finding intersection of
vehicle mass line and grade line. NOTE: 2% typical rolling
resistance is already assumed in chart and grade line.
2.From this intersection, move straight left across charts until
line intersects rimpull curve.
3.Read down from this point to determine maximum speed
attained at that tractive resistance.
B45D (6x6)
NVM
32,980 kg
72,708 lb
Retardation
Gross Retardation Force [kN]
B45D (6x6)
Total Resistance = % Grade - % Rolling resistance
1.Determine retardation force required by finding intersection of
vehicle mass line.
2.From this intersection, move straight left across charts until
line intersects the curve. NOTE: 2% typical rolling resistance
is already assumed in chart.
3.Read down from this point to determine maximum speed.
GVM
73,980 kg
163,098 lb
23
Technical Data - B50D
Engine
Mercedes Benz OM502LA, V-8,
Turbocharged and intercooled.
Gross Power
375 kW (503 hp) @ 1,800 rpm
Net Power
364 kW (488 hp) @ 1,800 rpm
Torque
2,400 Nm (1,770 lbft) @ 1,200 rpm
Output Differential
Interaxle 33/67 proportional differential,
pneumatically spring lockable whilst
stationary or on the move.
Axles
High strength steel fabricated
with spiral bevel type gears on the
Controlled Traction differential and
heavy duty outboard planetary gears.
Final drive type
Outboard heavy duty planetary on
all axles.
Displacement
15,93 liters (972 cu.in)
Fuel Tank Capacity
460 liters (122 US gal)
Housing type
Steel fabricated
AdBlue™ Tank Capacity
66 l (17 US gal)
Certification
OM 502 LA meets EU Stage IIIB/EPA
Tier 4i emissions regulations.
brakiNG system
Service Brake
Dual circuit, full hydraulic oil immersed
wet multidisc brakes on all three
axles.
Transmission
Fully automatic planetary transmission
with integral retarder.
Maximum Brake Force
391 kN (87,686 lbf)
Layout
Engine mounted with rear output
Park & Emergency
Spring applied, air released driveline
mounted disc.
Gear Layout
Constant meshing planetary gears,
clutch operated.
Maximum Brake Force
440 kN (98,920 lbf)-Static
105 kN (23,605 lbf)-Dynamic
Gears
6 Forward, 1 Reverse
Auxiliary Brake
Automatic exhaust brake
Engine Valve Brake (EVB).
Clutch Type
Hydraulically operated multi-disc
Control Type
Electronic
Torque Control
Hydrodynamic, with lock-up in all
gears.
Model
17 100
RETARDATION system
Engine Brake
Automatic exhaust brake and Engine
Valve Brake (EVB).
Maximum Retardation Power
345 kW (463 hp)
Total Retardation Power
797 kW (1,069 hp)
Layout
Three in-line helical gears
Tire
875/65R29
Tipping Angle
70º standard, or any lower angle
programmable.
Front Suspension
Semi-independent, leading A-frame
supported by hydro-pneumatic
suspension struts.
Pneumatic System
Air drier with heater and integral
unloader valve, serving park brake
and auxiliary functions.
System Pressure
810 kPa (117 psi)
Rear Suspension
Pivoting walking beams with
laminated rubber suspension blocks.
Electrical System
Voltage
24 V
Hydraulic System
Full load sensing system serving the
prioritized steering, body tipping,
suspension and brake functions.
A ground-driven, load sensing
emergency steering pump is
integrated into the main system.
Battery Type
Two maintenance free permanently
sealed.
Battery Capacity
2 X 105 Ah
Pump Type
Variable displacement, load sensing
piston.
Alternator Rating
28 V 80 A
Flow
350 l/min (93 gal/min)
Vehicle Speeds
1st
7 km/h
2nd
14 km/h
3rd
21 km/h
4th
31 km/h
5th
41 km/h
6th
47 km/h
R
7 km/h
Pressure
25 Mpa (3,626 psi)
Filter
5 microns
Transmission Retarder
Integral hydrodynamic, output shaft
speed dependant, six selectable
levels of retardation.
Transfer Box
Manufacturer
Bell VGR
Power Down Time
9,9 s (60º tip angle)
Wheels
Type
Radial Earthmover
Steering System
Hydrostatically actuated by two
double acting cylinders, with grounddriven emergency steering pump.
4 mph
9 mph
13 mph
19 mph
25 mph
29 mph
4 mph
Cab
ROPS/FOPS certified
74 dBA internal sound level measured
according to ISO 6396.
Angle
42º
Lock to lock turns
4,2
Dumping System
Two double-acting, single stage,
dump cylinders.
Raise Time
11,2 s (60º tip angle)
Load Capacity & Ground Pressure
GROUND PRESSURE
OPERATING WEIGHTS
OPTION WEIGHTS
LADEN (No sinkage)
kPa (Psi)
BODY m (yd )
Front
17,550 (38,691)
Front
274 (40)
Struck Capacity
22 (29)
Bin liner
1,451 (3,212)
Middle
8,500 (18,850)
Middle
335 (49)
SAE 2:1 Capacity
28 (37)
Tailgate
1,139 (2,511)
Rear
8,470 (18,673)
Rear
335 (49)
SAE 1:1 Capacity
34 (44,5)
Extra wheelset
1,031 (2,273)
Total
34,520 (76,104)
UNLADEN
kg (lb)
LADEN
24
LOAD CAPACITY
3
3
SAE 2:1 Capacity
LADEN (With sinkage) with Autogate
Front
23,440 (51,676)
Front
172 (25)
Middle
28,225 (62,225)
Middle
207 (30)
Rated Payload
Rear
28,255 (62,292)
Rear
207 (30)
Total
79,920 (176,193)
29,5 (39)
45,400 kg
(100,090 lb)
kg (lb)
Dimensions
NOTE:
ALL DIMENSIONS SHOWN ARE UNLADEN VALUES.
FOR ILLUSTRATIVE PURPOSES, AN AVERAGE
TYRE DEFLECTION HAS BEEN TAKEN.
Gradeability / Rimpull
NVM
34,520 kg
76,104 lb
GVM
79,920 kg
176,193 lb
1.Determine tractive resistance by finding intersection
of vehicle mass line and grade line. NOTE: 2% typical
rolling resistance is already assumed in chart and grade
line.
2.From this intersection, move straight left across charts
until line intersects rimpull curve.
3.Read down from this point to determine maximum
speed attained at that tractive resistance.
Retardation
NVM
34,520 kg
76,104 lb
GVM
79,920 kg
176,193 lb
1.Determine retardation force required by finding
intersection of vehicle mass line.
2.From this intersection, move straight left across charts
until line intersects the curve. NOTE: 2% typical rolling
resistance is already assumed in chart.
3.Read down from this point to determine maximum
speed.
25
Features and Options
l Standard
s Option
Engine
l l l l Wet-sleeve cylinder liners
l l l l Engine valve brake and exhaust brake
l l l l Dual-element air cleaner with dust ejector valve
l l l l Precleaner
l l l l Water separator
l l l l Provision for fast fill
l l l l Serpentine drive belt with automatic tensioner
Cooling
l l l l Crankshaft-mounted viscous-drive fan
l l l l Remote proportionally controlled hydraulic fan
drive
l l l l Fan guard
Pneumatic System
l l l l Engine-mounted compressor
l l l l Air drier with heater
l l l l Integral unloader valve
Electrical System
l l l l Battery disconnect
l l l l Drive lights
s s l l Deluxe work lights
l l l l Electric Hooter
l l l l Air Horn
l l l l Reverse alarm
l l l l Rotating Beacon
l l l l Pitch Roll Sensor
Steering System
l l l l Ground-driven secondary steering pump
Cab
l l l l ROPS/FOPS certification
l l l l Tilt cab
l l l l Gas strut-supported door
l l l l I-Tip programmable dump-body tip settings
l l l l Air conditioner
l l l l Heater
l l l l AM/FM radio/CD player
l l l l Rear window guard
l l l l Wiper/washer with intermittent control
l l l l Tilt and telescoping steering wheel
l l l l Centre-mount air-suspension seat
l l l l Rear window wiper
26
l Standard
s Option
Cab
l l l l Retractable seat belt
l l l l Foldaway trainer seat with retractable seat belt
l l l l 12-volt power outlet
l l l l Cup holder
l l l l Cooled/heated lunch box
l l l l Ashtray
l l l l Electric adjustable and heated mirrors
l l l l Deluxe monitor:
Analog speedometer / Fuel gauge / Transmission oil temperature gauge /
Engine coolant temperature gauge /
LED function/warning indicators and audible alarm / Transmission gear selection / Tachometer / Battery voltage / Hour meter / Odometer / Fuel consumption / Tip counter / Trip timer / Trip distance / Metric/English units / Service codes/diagnostics
Backlit sealed switch module functions:
Wiper control / Lights / Heated mirrors / Retarding aggressiveness / Controlled traction differentials (B35D/B40D/B50D) / Transfer case differential lock / Transmission gear hold / Dump-body tip limit / Automatic dump-body tip settings / Airconditioner/ Heater controls /
Preselected Speed Control
Dump Body
l l l l Dump-body mechanical lock
s s s s Body liner
s s s s Tailgate
s s s s Body heater
s s s s Less dump body and cylinders
Other
l 26.5R25 radial earthmover tires
l l s 29.5R25 radial earthmover tires
s l 875/65R29 radial earthmover tires
l l Remote grease banks
s s l l Automatic greasing
l l l l Onboard Weighing
s s s s Load lights
s s s s Comfort Ride Suspension
l l l l Reverse Camera
s s s s Hand Rails
s s l l Cab Peak
Notes
27
BELL INTERNATIONAL: Tel: +27 (0)35-907 9431
E-mail: marketing@bellequipment.com
Web: www.bellequipment.com
Tel: +61 (0)8-9356-1033
Tel: +49 (0)6631 / 91-13-0
Tel: +27 (0)11-928-9700
Tel: +44 (0)1283-712862
Tel: +33 (0)5-55-89-23-56
Tel: +7-495-287-80-02
Tel: +34-91-879-60-19
Tel: +1-855-494-2355
Broch13900713, D-series ADT (B35-B50D) Mk7.2 Tier 4i, Rev 3-English
All dimensions are shown in millimetres, unless otherwise stated between brackets.
Under our policy of continuous improvement, we reserve the right to change technical data
and design without prior notice. Photographs featured in this brochure may include optional
equipment. Blu@dvantage™ is a trademark of Bell Equipment Co. (PTY) Ltd.
AdBlue™ is a registered trademark of VDA.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising