Panasonic | PT-VX400E | Datasheet | Panasonic PT-VW330E data projector

PT-VW330 Series
LCD Projectors
PT-VW330
PT-VX400
High Brightness in a Compact Body.
Portable Projectors with Advanced Eco Performance.
Enhanced Basic Performance
in a Compact, 3.5-kg (7.7-lb) Body.
Setting a New Standard for Portable Projectors.
The PT-VW330 Series portable projectors offer high brightness
in a compact, 3.5-kg (7.7-lb) body. These models also feature a wide
range of functions that greatly reduce the hassle and cost of
maintenance, such as a lamp replacement cycle of up-to-5,000
hours*1 and an air filter replacement cycle of up-to-6,000 hours.*2
A newly developed intelligent lamp control system effectively
reduces power consumption. These advanced models provide
powerful visual support with superb performance while
minimizing environmental impact.
PT-VW330 *
WXGA
3,000 lm
Side-by-Side/P-in-P
PT-VX400 *
XGA
4,000 lm
* Product numbers vary depending on the market. The product number in North America and Taiwan is PT-VW330U and PT-VX400U. The product number in Europe (except UK) and CIS is PT-VW330E and PT-VX400E.
The product number in UK, Asia (except Taiwan), Oceania, Middle East, and Africa is PT-VW330EA and PT-VX400EA.
Superb Basic Performance in a Compact,
3.5-kg (7.7-lb) Body
Versatile Eco Performance Helps the Environment
A Full 4,000 lm/3,000 lm*3 of Brightness and
2,000:1 Contrast
Intelligent Lamp Control System Reduces
Power Consumption
A remarkable 4,000 lm/3,000 lm*3 of brightness and 2,000:1 contrast have
been achieved in a compact, easy-to-carry, 3.5-kg (7.7-lb) body. Bright, clear
images enhance a variety of viewing situations and applications.
When the lamp power is set to
Auto, the intelligent lamp control
system automatically adjusts the
lamp output in accordance with
the brightness of the projected
image and reduces it by up to 70%.
It also combines with color shift
correction, which corrects the shift
in the color balance that occurs
when the lamp output reduces.
As a result, power consumption is
effectively reduced while excellent
color reproduction is maintained.
These handy portables offer a lamp replacement cycle of up-to-5,000
hours*1 for extended, maintenance-free use. Three-layered air filters, in
which each layer contains a different mesh size, are installed in two parts
of the body. Increasing the filters’ surface area made it possible to achieve a
replacement cycle of up-to-6,000 hours.*2 This reduces maintenance hassles
for long periods of use, and helps to lower maintenance costs and reduce
environmental impact.
Air Filter Unit
3-Layer Air Filter
Metal mesh
Dust
Urethane
Large
Hole punched (metal)
Medium
Small
Quiet 29-dB*4 Design Does Not Interrupt
Meetings or Classes
The quiet design keeps noise levels down to 29 dB,*4 so the sound of the
cooling fan is hardly noticeable. This helps the audience to keep their attention
on the speech when someone is giving a presentation or on the screen images
during quiet scenes.
Lamp output
Normal mode
Eco mode
Bright
Input signal level
Dark
Intelligent Lamp Control System
Lamp output
A Maximum 5,000-Hour*1 Lamp Replacement Cycle
and 6,000-Hour*2 Air Filter Replacement Cycle
Conventional Lamp System
Up to
70%
Bright
Input signal level
Bright scene
Dark
Dark scene
Displaying the Total Amount of Reduced
Power Consumption and CO2 Emission
When the lamp power is set to
Eco1, Eco2 or Auto, you can display
the total amount of reduced power
consumption and decreased CO2
emission compared to when the
lamp power is set to Normal. It
can be shown by day, month or
year. Quantitatively checking these
reductions helps to increase the
awareness of energy saving and
the environment.
Environmentally Friendly Standby Power
Consumption of Only 0.48 W*5
When Standby mode is set to Eco, the standby power consumption is low at
0.48 W.*5 This lowers running costs, and helps to reduce environment impact.
Convenient Functions for Portable and Ceiling-Mounted Applications
1.6x Zoom Lens Allows Flexible Installation
When projecting onto a 100-inch wide screen, the 1.6x zooms lens lets the
PT-VW330, for example, support a wide range of projection distances, from 2.5
to 4.1 meters (8.2 to 13.5 feet).
Auto Input Signal Search and Input Guidance
Enables Easy Setup
Side-by-Side and P-in-P Function*6 (PT-VW330)
for Effective Presentations and Lectures
Two different image sources can be simultaneously displayed onto a single
screen. You can also switch to P-in-P (Picture-in-Picture) mode and display a
sub-window onto the main screen. The sub-window can be positioned at any
of the four corners (upper left, upper right, lower left, lower right) to expand
the usable area as only a wide-screen projector can do.
The Auto Input Signal Search function automatically detects the input signal
and selects the input channel based on the signal. This function lets you start
a presentation without any complicated setup required. If the input signal
cannot be detected, the Input Guidance function will display connection
instructions on the projector screen, for easy setup.
10-Watt Speakers and a Microphone Input
Enables Audio Playback Directly from the Projector
These portable projectors feature
high-output 10-watt speakers
that produce a high sound
volume without requiring external
speakers. They also feature a
microphone input terminal that
allows microphone sounds to be
output from the projector. These
features make presentations even
more effective.
HDMI Input Terminal and Abundant Interfaces
Extensive interfaces include an HDMI input terminal, 2 sets of computer (RGB)
input terminals, a wired LAN terminal, and a serial (RS-232C) terminal for
external control. These features support a wide range of system architectures
for portable or ceiling-mounted use.
Side-by-Side Mode
P-in-P Mode
Top-Panel Lamp Replacement
Simplifies Maintenance
The lamp can be reached through the top panel
for easy replacement. This eliminates the need
to detach the projector from its ceiling bracket
and greatly simplifies maintenance.
Convenient Carrying Bag
A carrying bag with a handy shoulder strap comes
with the projector. This bag helps protect the projector
from impacts.
Other Features
•Direct Power Off right after use
•Effective theft prevention with the startup logo*7
•Projector identification system for remote control allocation
of up to six projectors
Easy Remote Monitoring and Control over a LAN
A web browser on a computer connected through a wired LAN system lets
you remotely operate projectors and check their status. An e-mail messaging
function can also notify you when a lamp needs replacement, and indicate the
overall projector status. In addition, Multi Projector Monitoring and Control
Software is available for monitoring and controlling multiple Panasonic
projectors from a single PC. The wired LAN terminal is compatible with
PJLink™(class1), an open protocol that is used by many manufacturers, to
enable integrated control of systems that contain different brands of projectors.
Basic concept of the Multi Projector Monitoring and Control Software
Auditorium
Lecture room
•Built-in closed caption decoder
*Remote control for the PT-VW330.
Ecology-Conscious Design
• No halogenated flame retardants are used in the cabinet.
• Lead-free glass is used for the lens.
• Lamp power switching further reduces power consumption.
• Standby power consumption of only 0.48 W*5 has been achieved.
• RoHS compliant
Seminar room
Classroom
*1 This is the maximum value when the lamp power is set to Eco1, Eco2, with the lamp turned on for 2 hours
and off for 0.25 hours. Increases in the lamp on cycle or extended use with the lamp continuously turned
on will shorten the lamp replacement cycle. When the lamp power is set to Normal, the lamp replacement
cycle is 3,000 hours.The usage environment affects the lamp replacement cycle.
*2 With the lamp power set to Eco1, Eco2. The usage environment affects the duration of the filter.
*3 The PT-VX400 has 4,000 lm and the PT-VW330 has 3,000 lm of brightness.
*4 With the lamp power set to Eco1, Eco2.
*5 Standby mode: Eco. When Standby mode is set to Eco, network functions such as standby on via LAN are
not available. Also, only certain commands can be received for external control using the serial terminal.
*6 This function is not effective for some source combinations.
*7 The included Logo Transfer Software is required to upload a new logo.
Specifications
Projection distance
Model
PT-VW330
PT-VX400
Power supply
Power consumption
LCD
panel
Panel size
100-240 V AC, 50/60 Hz
322 W (0.48 W when standby mode set to Eco*1,
12.5 W when standby mode set to Network.)
322 W (0.48 W when standby mode set to Eco*1,
10.0 W when standby mode set to Network.)
15 mm (0.59 inches) diagonal (16:10 aspect ratio)
16 mm (0.63 inches) diagonal (4:3 aspect ratio)
Display method
Pixels
L
Projected image
786,432 (1,024 × 768) x 3, total of 2,359,296 pixels
Lens
1.6x manual zoom (throw ratio: 1.2–1.9:1), manual focus, F 1.65–2.33, f 15.47–24.53 mm
Lamp
245 W × 1, lamp replacement cycle (lamp power: Normal/Eco1, Eco2): 3,000 hours/5,000 hours*2
Screen size (diagonal)
3,000 lm (lamp power: Auto/Normal)
Lower edge of projected image
4,000 lm (lamp power: Auto/Normal)
Center-to-corner uniformity*3
PT-VW330 (16:10 aspect ratio; throw ratio: 1.2–1.9:1)
85%
Contrast*3
2,000:1 (full on/full off, lamp power: Auto)
1,280 × 800 pixels (Input signals that exceed this
resolution will be converted to 1,280 × 800 pixels.)
Resolution
HDMI
Diagonal
image size
1,024 × 768 pixels (Input signals that exceed this
resolution will be converted to 1,024 × 768 pixels.)
Horizontal: 15–80 kHz, vertical: 50–85 Hz, dot clock: 162 MHz or lower
fH: 15–100 kHz, fV: 50–100 Hz, dot clock: 140 MHz or lower
(Signals exceeding the dot clock rate of 140 MHz are downsampled.)­­­
RGB (analog)
fH: 15.75 kHz, fV: 60 Hz [480i(525i)]
fH: 31.50 kHz, fV: 60 Hz [480p(525p)]
fH: 45.00 kHz, fV: 60 Hz [720(750)/60p]
fH: 33.75 kHz, fV: 60 Hz [1080(1125)/60i]
YPBPR (YCBCR)
Video/S-Video
fH: 15.63 kHz, fV: 50 Hz [576i(625i)]
fH: 31.25 kHz, fV: 50 Hz [576p(625p)]
fH: 37.50 kHz, fV: 50 Hz [720(750)/50p]
fH: 28.13 kHz, fV: 50 Hz [1080(1125)/50i]
fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60], fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical axis shift
49:1
Keystone correction range
9:1
Vertical: ±30% (±20% when Auto Keystone)
Installation
Ceiling/floor, front/rear
HDMI IN
HDMI 19-pin x 1 (compatible with HDCP)
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/60p, 1080/50p,
VGA (640 x 480)-WUXGA (1,920 x 1,200)*4, compatible with non-interlaced signals only, dot clock: 25 -162 MHz
COMPUTER IN 1
D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR x 1)
D-sub HD 15-pin (female) x 1 (RGB×1), (input/output selectable using on-screen menu)
(When Monitor Out is selected, the COMPUTER IN 1 signal is output.)
COMPUTER IN 2 /
MONITOR OUT
VIDEO IN
RCA pin x 2 (L-R x 1) for VIDEO/S-VIDEO input
COMPUTER AUDIO IN 1
M3 x 1 (L-R x 1)
COMPUTER AUDIO IN 2
(MIC IN)
M3 x 1 (L-R x 1) for audio input or for microphone connection (variable)
AUDIO OUT
M3 x 1 (L-R x 1) for output (variable)
SERIAL IN
D-sub 9-pin (male) × 1 for external control (RS-232C compliant)
0.76
1.02
1.27
1.52
1.78
2.03
2.29
2.54
3.05
3.81
5.08
6.35
7.62
RJ-45 × 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™ (class 1))
LAN
Built-in speaker
3.7 cm round shape × 1, output power: 10 W (monaural)
Noise level
35 dB (lamp power: Normal), 29 dB (lamp power: Eco1, Eco2)
Cabinet materials
Molded plastic
350 x 97 x 277 mm (13.8" x 3.8" x 10.9") (with legs at shortest position, not including protruding parts)
Weight
Approximately 3.5 kg (7.7 lbs)
Operating environment
Supplied accessories
[30"]
[40"]
[50"]
[60"]
[70"]
[80"]
[90"]
[100"]
[120"]
[150"]
[200”]
[250"]
[300"]
Diagonal
image size
Mini DIN 4-pin × 1 (S-Video)
AUDIO IN
0.76
1.02
1.27
1.52
1.78
2.03
2.29
2.54
3.05
3.81
5.08
6.35
7.62
Projection distance (L)
min.(wide)
0.7 (2.3)
1.0 (3.3)
1.3 (4.3)
1.5 (4.9)
1.8 (5.9)
2.0 (6.6)
2.3 (7.5)
2.5 (8.2)
3.1 (10.2)
3.8 (12.5)
5.1 (16.7)
6.4 (21.0)
7.7 (25.3)
max.(tele)
1.2 (3.9)
1.6 (5.2)
2.0 (6.6)
2.5 (8.2)
2.9 (9.5)
3.3 (10.8)
3.7 (12.1)
4.1 (13.5)
4.9 (16.1)
6.2 (20.3)
8.0 (26.2)*5
8.0 (26.2)*5
8.0 (26.2)*5
Height from the edge
of screen to center of
lens (H)
0.01
0.01
0.01
0.02
0.02
0.02
0.02
0.03
0.03
0.04
0.05
0.07
0.08
(0.03)
(0.03)
(0.03)
(0.07)
(0.07)
(0.07)
(0.07)
(0.1)
(0.1)
(0.13)
(0.16)
(0.23)
(0.26)
PT-VX400 (4:3 aspect ratio; throw ratio: 1.2–1.9:1)
RCA pin × 1 (composite video)
Terminals S-VIDEO IN
Dimensions (W × H × D)
L
H
0.76–7.62 m (30–300 inch)
Brightness*3
Scanning
frequency
H
Transparent LCD panel (x 3, R/G/B)
1,024,000 (1,280 × 800) x 3, total of 3,072,000 pixels
unit: meters (feet)
Upper edge of projected image
Operating temperature: 5°C–35°C (41°F–95°F), operating humidity: 20%-80% (no condensation)
Power cord x 1 (x 2 for PT-VW330EA/VX400EA), wireless remote control unit, batteries (R03/AAA type × 2),
carrying bag x 1, VGA cable x 1, filter cover, software CD-ROM (Logo Transfer Software,
Multi Projector Monitoring & Control Software)
[30"]
[40"]
[50"]
[60"]
[70"]
[80"]
[90"]
[100"]
[120"]
[150"]
[200"]
[250"]
[300"]
Projection distance (L)
min.(wide)
0.7 (2.3)
1.0 (3.0)
1.2 (3.9)
1.4 (4.6)
1.7 (5.6)
1.9 (6.2)
2.2 (7.2)
2.4 (7.9)
2.9 (9.5)
3.6 (11.8)
4.8 (15.7)
6.0 (19.7)
7.2 (23.6)
max.(tele)
1.1 (3.6)
1.5 (4.9)
1.9 (6.2)
2.3 (7.5)
2.7 (8.9)
3.1 (10.2)
3.5 (11.5)
3.9 (12.8)
4.7 (15.4)
5.8 (19.0)
7.8 (25.6)
8.0 (26.2)*5
8.0 (26.2)*5
Height from the edge
of screen to center of
lens (H)
0.05
0.06
0.08
0.09
0.11
0.12
0.14
0.15
0.18
0.23
0.31
0.38
0.46
(0.16)
(0.2)
(0.26)
(0.3)
(0.36)
(0.39)
(0.46)
(0.49)
(0.59)
(0.75)
(1.02)
(1.25)
(1.51)
*1 When Standby mode is set to Eco, network functions such as standby on via LAN are not available. Also, only certain commands can be received for external control
using the serial terminal.*2 The values given for the recommended lamp replacement cycles are maximum.*3 Measurement, measuring conditions, and method of
notation all comply with ISO 21118 international standards.*4 Compliant with VESA CVT-RB. *5 There is no guarantee of the lens performance when the projection
distance exceeds 8.0 m (26.2 feet).
Dimensions
unit: mm (inch)
Optional accessories
Replacement lamp unit
97 (3-7/8)
ET-LAV100
350 (13-3/4)
Replacement filter unit
Ceiling mount
bracket for
high ceilings*6
ET-RFV100
ET-PKV100H
277 (10-7/8)
Caution
Ceiling mount bracket
for low ceilings*6
ET-PKV100S
Bracket assembly
ET-PKV100B
*6 This product is used together with an optional bracket assembly (sold separately).
Do not install the projector in locations that are subject to excessive water, humidity, steam or oily smoke. Doing so may result in fire, malfunction or electric shock.
NOTE ON USE
1 The projector uses a high-voltage mercury lamp under high internal pressure. This lamp may break, emitting a popping
sound, or fail to illuminate, due to impact or extended use.
2 The high-wattage lamp becomes very hot during operation. Please observe the following precautions:
• Never place objects on top of the projector while it is in operation. • Make sure there is an unobstructed space of 1,000 mm (39-3/8 in) or more around the projector’s exhaust openings.
• If stacking projector units, care must be taken to provide the recommended space between units. These space
requirements also apply to installation where only one projector unit is operating at one time and the other unit is used
as a backup.
• If the projector is placed in a box or enclosure, the temperature of the air surrounding the projector must match the
operating temperature listed in the specifications table during use. Also, make sure the projector’s intake and exhaust
openings are not blocked. Ensure there is sufficient ventilation to prevent hot air from the exhaust openings being
recirculated into the intake opening.
3 The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods.
• The lamp replacement cycle varies greatly depending on individual lamp characteristics and usage conditions.
• The brightness of the lamp will gradually decrease with use.
4 Due to natural characteristics of lamps, screen brightness may fluctuate. This is not an indication of faulty lamp performance.
For more information about Panasonic projectors
http://panasonic.net/avc/projector
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
Product availability differs depending on region and country. This product may be subject to export control regulations.
The projection distances and throw ratios given in this brochure are for use only as guidelines. For more detailed information, please
consult the dealer from whom you are purchasing the product. The PJLink trademark is an application trademark in Japan, the
United States, and other countries and regions or registered trademarks. All other trademarks are the property of their respective
trademark owners. Projection images simulated.
© 2011 Panasonic Corporation. All rights reserved.
All information included here is valid as of August 2011.
PT-VW330G1 Printed in Japan.
Download PDF

advertising