LEDsmart™ Long Interval Timer
DIGINET CONTROL SYSTEMS DATA SHEET
LEDsmart™ Long Interval Timer
¼ hour to 7 ½ hour
www.diginet.net.au
Wall plate
not included
Range
METH / DGPB
Overview
Designed in Australia, this electronic timer is designed to automatically switch lighting off after the
timeout period programmed by the installer.
As part of the LEDsmartTM range, this timer enables dimmers, switches and timers to be combined
onto the same wall plate, providing the user with a consistent interface.
Features
Timer is programmable
between ¼ hour and 7 ½ hour,
in 1 ⁄4 hour steps
Programmable timer setting,
maximum level and off state
indicator
Timer override feature to stop
the lights turning off
automatically
Simple 3-step timer interval
setting
1W minimum load
White LED, illuminated bezel
Terminal block included for
AS3000 compliance
Flush and rocker style button
options
Easy-fit terminal block
Advanced ‘warning’ feature to
dim lighting to 50% level for 5
minutes after time out
Mode to convert from Long
Interval timer to Short Interval
timer.
Data Sheet METH / DGPB - Edition 01
Subject to change without notice
Fall back LED Indicator
Settable Low brightness
indicator
Quiet, soft press button – no
harsh click
Latest updates available at www.diginet.net.au
1
of 3 pages
LEDsmart™ Long Interval Timer
¼ hour to 7 ½ hour
Specifications
Compatible Load Types
Load Symbol
Load Type
Maximum Load
LED Lamps
400W
Electronic Transformers
400W
Standard Iron-Core Transformers
250W
Toroidal Iron-Core Transformers
300W
Incandescent
350W
CFLs
400W
Notes
The LED driver must be dimmable. Maximum permitted
number of drivers is 400W divided by driver nameplate power
rating.
Due to variety of LED lamp designs, maximum number of LED
lamps is further dependent on power-factor result when
connected to timer.
Due to variety of transformer designs, maximum LV lighting
load is also dependent on transformer efficiency.
Due to variety of CFL designs, maximum number is
make/model dependant.
Multi-gang de-rating
In applications where multiple devices are installed in a multi-gang plate, a de-rating factor is applied to the maximum load as follows
Number of devices per plate
De-rating factor
1
No de-rating
2
0.85
3
0.70
4
0.55
5
0.40
6
0.25
De-rating example
Two timers installed in a wall plate. The maximum LED load which can be connected to each timer = 400W x 0.85 = 340W per timer
Incompatible Load types
Ceiling Sweep Fans and Exhaust fans
Nominal Line Voltage Amplitude Range
Nominal Line Voltage Amplitude Range
220-240Vac
Line Voltage Frequency
50Hz Nominal (47-53Hz)
Default time out
½ hour
Rated Load
Refer Compatible Loads
Minimum Load
1W
Data Sheet METH / DGPB – Edition 01
Subject to change without notice
Latest updates available at www.diginet.net.au
2
of 3 pages
LEDsmart™ Long Interval Timer
¼ hour to 7 ½ hour
Typical Electrical Connections
Dimensions
METH/DGPB
Dimmer
Approvals & Compliance
CONTACT INFORMATION
Web
General Enquiries:
Technical Services:
Fax:
PRODUCT OF GERARD LIGHTING PTY LTD
www.diginet.net.au
1 300 95 DALI (3254)
1 300 95 3244
1 300 95 3257
sales@diginet.net.au
support@diginet.net.au
ABN – 94 1 22 520 307
96-1 1 2 Gow Street
Padstow NSW 221 1
DIGINET IS A BRAND OF GERARD LIGHTING GROUP
The product includes a TWO-YEAR WARRANTY against manufacturing defects. Fully warranty terms can be found here www.diginet.net.au
COPYRIGHT. ©This document is copyright to Gerard Lighting Pty Ltd. Except as permitted under relevant law, no part of this user and installation guide may be
reproduced by any process without written permission of and acknowledgement to Gerard Lighting. DISCLAIMER. Gerard Lighting Pty Ltd reserves the right to
alter the specifications, designs or other features of any items and to discontinue any items at any time without notice and without liability. While every effort is
made to ensure that all information in this user and installation guide is correct, no warranty of accuracy is given and Gerard Lighting shall not be liable for any
error. TRADEMARKS. The identified trademarks and copyrights are the property of Gerard Lighting Pty Ltd unless otherwise noted.
Data Sheet METH / DGPB – Edition 01
Subject to change without notice
Latest updates available at www.diginet.net.au
3
of 3 pages
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising