Data Sheet K85001-0391 - Horn
Kidde Catalog u Strobes, Horns, Bells, Chimes
Technology that saves lives
Horn/Siren
Combination
E14660
5520D Series
Overview
5520D series Duotronic signals are 24 Vdc diode-polarized,
heavy duty, high-decibel signaling appliances for use in fire alarm
applications where a supervised signal is required. Colored sage
gray, 5520D Series signals will finction as either a horn or siren by
setting an internal tamper-proof switch.
The 5520D Horn/Siren has no moving parts or contacts to wear
out. It requires no maintenance or lubrication. The horn/siren operates with very low current consumption and does not require extra
current on start-up. The horn’s predominant frequency is 1.1 KHz.
When horn output is selected, the frequency rises and falls from
300 to 3000 Hz every 3 seconds.
Once mounted, the horn/siren switch is tamperproof. The horn is
suitable for coded applications, while the siren is not. The 5520D
Series can be made suitable for outdoor weatherproof applications
by adding the catalog number 349 Backbox.
Page 1 of 2
Standard Features
• No moving parts
• High dB output
• Suitable for coded signals (horn mode only)
• Swivel/adjustable mounting
• Outdoor/weatherproof option
• Diode polarized
• Low current draw, no inrush current
• Mounts to one-gang opening
Application
5520D signals signals are ideal for indoor or outdoor applications
including schools, factories, commercial occupancies, and lumber
yards. They can be used where standard bells or horns are not
satisfactory, particularly in areas of high noise level. The unit will
function as a Horn or Siren with just the flick of a switch.
K85001-0391
D ATA S H E E T
Not to be used for installation purposes. Issue 1
Installation
Technology that saves lives
Contact us...
Email: kidde.fire@fs.utc.com
Web: Kidde.com/EngineeredSystems
5520D Series signals include a universal mounting plate that permits mounting to a
standard single gang, 3¼, 3½, or 4-inch octagon outlet box, or a 4-inch square box. It
may also be installed without a box directly to the wall or ceiling. The megaphone may be
swivelled through 180° horizontally and 90° vertically. All wiring is made to colour-coded
wire leads attached to a quick-disconnect plug. When complete, the device just plugs-in
and is locked to the mounting plate with a set screw. For weatherproof installations, use a
Cat. No. 349 back box, ordered separately.
Kidde is a UTC brand.
1016 Corporate Park Drive
Mebane, NC 27302
© 2016 United Technologies Corporation.
All rights reserved.
Wiring
Warning: Install this device in accordance
with the supplied installation instructions,
and applicable editions of the NFPA codes
and standards, and the Canadian Electrical
Code (Part 1, Section 32), CAN/ULCS524, Standard for the Installation of Fire
Alarm Systems, and in accordance with
the local authorities having jurisdiction.
Caution: These devices will not operate
without electrical power. As fires frequently
cause power interruptions, we suggest
you discuss further safeguards with your
fire protection specialists.
Specifications
Nominal Operating Voltage
Current Draw
Sound Pressure Output
Horn Characteristic
Siren Characteristic
Wiring Connections
Finish
Approvals
20 - 24 Vdc
350 mA
Horn – 114 dBA at 10 ft (3m); Siren – 112 dBA at 10 ft (3m)
Predominant 1.1 KHz (Suitable for coded signals)
Rises and falls 600 to 1300 Hz every three seconds
(Not suitable for coded signals)
Color-coded wire leads with quick-disconnect plug
Metallic gray enamel
UL, ULC, FM
Ordering Information
Description
Horn/Siren Combination - 24 Vdc
Ship Wt.
25 lb (11.5kg)
Accessories
349
Weatherproof Backbox
0.5lb (0.2kg)
K85001-0391
D ATA S H E E T
Not to be used for installation purposes. Issue 1
10-11-16
Page 2 of 2
Cat. No.
5520D-AW
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising