ITOH DENKI USA, INC PRODUCT CATALOG

ITOH DENKI USA, INC PRODUCT CATALOG
ITOH DENKI USA, INC
PRODUCT CATALOG
Itoh Denki's DC Revolution
1986 - Brushed DC Roller PM570DS
1988 - Brushless DC Roller PM570ES
1998 -1.9" DC Roller PM486FS
2001 - 2.5" DC Roller PM635FS
2006 - ZPA Driver Card HB-510S
2009 -CANopen 4-zone controller IB-N03BN
2012 - DC Transfer F-RAT-S
2013 -2-zone Ethernet IP controller IB-E01
Conveying Confidence
For over 60 years Itoh Denki has been the proven leader in the development and manufacture of
superior motorized rollers and components. This history provides you confidence in all of your conveyor
applications and designs, a confidence based on the component integrity offered by the only sole
source motor and control manufacture in the industry.
Intelligent solutions you'd expect from Itoh Denki
Features & Solutions
Features & Solutions:
In today's progressive manufacturing and distribution environments, designing conveyor systems
can be a difficult challenge. Complex problems often need to be solved. Now there is an
innovative and advanced engineering solution that meets the demands of a new age in
production automation and flexibility. The POWER MOLLER is a self-contained motorized roller
that opens new horizons in handling system design. Its low profile and ease of installation make it
the perfect choice when production efficiency and space savings are required.
Working Concept:
The turning force of the motor (outer rotor) is transmitted through the shock absorber to the
planetary gearing. The planetary gearing drives the inner gear which is affixed to the roller tube.
The tube will rotate because the output shaft (stator) is held stationary by the conveyor frame.
"One Touch" Spring Loaded Shaft:
The POWER MOLLER spring-loaded attaching shaft enables the unit to be quickly installed or
removed without disassembling the conveyor frame.
SpaceSaving:
Motor and Gearbox integral with roller tube.
Easy Installation:
Spring-loaded shaft enables quick and easy installation into new or existing equipment.
Safe, Simple and Clean:
Totally sealed construction with no exposed chains or sprockets.
Quiet and Smooth Operation:
Enables low vibration transfer.
Maintenance Free:
Lifetime lubrication ensures long life and maintenance free operation.
Built-in Shock Absorber:
Protects the gearbox from a sudden stop, impact, or acceleration in the line.
Easy Wiring:
Supplied mounting fitting with terminal block and safety cover secures the motor shaft to the
frame and provides for easy and convenient wiring.
Reversible:
Easy control of forward, reverse and stop functions.
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
3
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
Applications
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
4
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
Table of Contents
Page Number
6-8
Selection
DC Model Rollers
Driver Cards
Hybrid Card
PM320HS
PM486FE
PM486FS
PM486FP
PM486FH
PM486XE
PM486XP
PM486LD
PM570FE
PM605FE
PM635FS
PM635KE
9
10-11
12-13
14-15
16-17
18-19
20-21
22-23
24-25
26-27
28-29
30-31
CB-016S7
CB-030S
CBM-103F
CBM-105F
CBM-107F
SID
32
33
34
35
36
37
HB-510
38
IB-E01
39
IB-N05B
IB-N06F
GWM-CAN/EIP-01
40
41
42
PM380AS
PM427AS
PM486BS
PM570AS
PM570BP
PM570AU
PM605AS
PM605BP
PM605AU
PM763BS
43
44
45
46
47
48
49
50
51
52
F-RAT-S
53
54
55-56
57
58-60
61-63
64
65-66
2-Zone Controller
4-Zone Controllers
AC Model Rollers
Transfers
Terminal Blocks
Mounting Brackets
Extension Cables
Technical Information
Options / Belt Pulleys / Grooves
Installation Precautions
AC Wiring
Specifications in this catalog are subject to change without prior notice.
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
5
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
Selection
STANDARD PART NUMBER EXAMPLE
PM486FE-60-747-D-024
Voltage: 24V
Voltage Type: DC
Tube Length: 747mm
Speed Code: Nominal 60m/min
Brushless DC Motor: Output on cable side shaft
Diameter: 48.6mm
Model Type: Power Moller
HOW TO SELECT A POWER MOLLER
Information needed:
1 - Material: What is in contact with the Motorized Roller?
•
Metal
•
Plastic
•
Wood
•
Urethane
•
Natural rubber
•
Corrugated cardboard
•
Other material
2 - Product weight: What will be the maximum weight?
3 - Available voltage: What voltage are you using?
•
24VDC
•
3f 230VAC @ 60Hz
•
1f 115VAC @ 60Hz
•
Other Voltages
4 - Desired transportation speed: How fast do you want to move the article?
•
Feet/minute (FPM)
5 - Diameter of the roller: What diameter are you looking for?
Common Itoh Roller Diameters
•
1.50” (38.0mm)
•
1.68” (42.7mm)
•
1.91” (48.6mm)
•
2.25” (57.0mm)
•
2.38” (60.5mm)
•
2.50” (63.5mm)
•
3.00” (76.3mm)
(Convert English units to Metric units, 1 inch=25.4 mm)
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
6
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
Selection
6 - Between frame dimension: What is your between frame dimension (BF)?
HOW TO SPECIFY THE LENGTH OF A POWER MOLLER:
In determining the correct length of the POWER MOLLER required, you should first obtain the
between frame width of the conveyor you will be mounting the POWER MOLLER in. If this
dimension is in inches, you should convert the dimension to millimeters, as all Moller tube lengths
are in metric units. From this dimension, subtract 15 millimeters for bearing end caps and
clearances to achieve the correct tube length. Subtract 21 mm when using “JQ” type shafts;
For the PM635FS the deduction will be 20366mm
mm, [14.41"]
PM763BS the deduction will be 30 mm, and for
Tube Length
the IP-G and HP-G rollers 35 mm.
5mm [0.20"]
Bearing End Cap
5mm [0.20"]
Bearing End Cap
2.5mm [0.10"]
Clearance
2.5mm [0.10"]
Clearance
381mm [15.00"]
Between Frame
Example: Between frame measures 15 inches. Converting to millimeters 15" X 25.4 mm / in. =
381 mm. Deducting 15 mm for bearing caps and clearances, 381mm - 15 mm = 366 mm. Tube
length will be 366 mm long. When in doubt, contact an Itoh representative to help you in selecting
the correct Power Moller for your application.
7 – Options: Does the application call for any special options?
•
Lagging (Natural Rubber, NBR, Neoprene, Urethane)
•
Dust-proof
•
Waterproof
•
Brake
•
Clutch
•
Other
•
KF - Brackets not ordered with roller
Important Formulas:
Tangential Force (TF)
1 - Tangential force is the force in lbs. that is needed to move the item on the conveyor.
The force tangent to the roller’s surface.
Tangential force F can be found by the following formula:
Formula 1
TF = µ X W
TF = Required tangential force
W= Weight of article to be transferred
µ = Coefficient of rolling friction in accordance with the material composition
of the bottom of the article to be transferred. (See Table I)
2 - To determine the number of POWER MOLLER units required for transfer, compare
required tangential force (F) and the tangential force of one POWER MOLLER unit (f)
Formula 2
Number of POWERMOLLERS required = F/f
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
7
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
Selection
Table I - Coefficient of Rolling Friction (µ)
Tube Material
Steel
Urethane Lagging
Natural Rubber Lagging
Product Material
Natural
Corrugated
Rubber
Cardboard
Metal
Plastic
Wood
Urethane
0.01 - 0.03 0.02 - 0.04 0.02 - 0.05 0.02 - 0.05 0.03 - 0.05 0.07 - 0.11
0.02 - 0.05 0.02 - 0.05 0.02 - 0.05 0.02 - 0.05 0.03 - 0.05 0.07 - 0.11
0.03 - 0.05 0.03 - 0.05 0.03 - 0.05 0.03 - 0.05 0.03 - 0.05 0.07 - 0.11
The above values are based on industry standards of products with a smooth, uniform bottom surface in contact with the roller.
Example
•
Material
Cardboard
•
Weight
25 lbs.
3f 230VAC @ 60Hz
•
Voltage
•
Speed
85 FPM
•
Diameter
2.25”
•
BF
24”
•
Options
None
A - Tangential force required (Formula 1)
Given W = 25 lbs.
Cardboard coefficient m = 0.11
TF = m X W
TF = 0.11 X 25 lbs.
TF = 2.75 lbs. required to move the article
PM570AS-20 TF - 5.4 lbs. > 2.75 lbs. (See Performance Data, page 45)
B - Match/Best fit the diameter
•
Diameter given 2.25” (57.0 mm)
Model - PM 570
C - Given AC motor type
•
Model number/motor type reflects AC or DC
–
PM570AS
D - Select the best speed for the customer
•
Speed code is an approximate meter-per-minute figure
–
Varies by model
–
Reference FPM values
–
See speed table for PM570AS, page 45
•
Given 85 FPM, Speed code -20 offers 89.6 FPM
Model number with speed code - PM570AS- 20
E - Maximum Load Limit
–
See maximum static load limit table, page 60
–
PM570 series
–
500 – 600 mm tube length
–
Maximum load limit of 176 lbs. per roller
–
25 lbs. load < 176 lbs. limit – Okay
F - Select the correct voltage
PM570AS is an AC motor type
•
Available voltage is 3f 230VAC @ 60Hz
Model number with voltage - PM570AS-20-595- 3-230
G - Options
•
No options given
Final model number PM570AS-20-595-3-230
Description
•
2.25” Diameter
•
Standard AC motor type
•
90.1 FPM
•
595 mm Tube Length
•
3f 230 VAC @ 60 Hz
•
No Options
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
8
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
PM320HS DC Motor Driven Roller
Diameter: 1.26" (32.0mm)
Voltage: 24V DC
Standard Features
-Low-profile, compact design
-Stable speed against varying loads
-No hall effect sensors
-Reversible
-Stainless steel exterior
for wash down applications (IP 65)
-Ideal for small belt applications
-Brushless DC motor provides long life
-Crowned, seamless tube
-7/16" hex shaft standard
-ABEC 1 Bearings
10mm
[0.39"]
M5
20mm
[0.79"]
Ø32mm
[1.26"]
A Series bracket (standard)
6mm
[0.24"]
Tube Length in mm (TL)
16 mm
[.63"]
Between Frame in mm (BF)
9 mm
[.35"]
Crowned
20mm
[0.79"]
3mm
[0.12"]
8mm
[0.31"]
11.1mm
[0.44"]
9 mm
[.35"]
BF=TL+12mm
M5
2.9 mm
[.11"]
Opposite cable
side bracket
AM-32HS-M5
Cable side
bracket for
7/16" hex shaft
A-081-G (Hex point up)
45 mm
[1.77"]
150mm
[5.91"]
60 mm
[2.36"]
51 mm
[2.01"]
Crowned
6mm
[0.24"]
9mm
[0.36"]
27mm
[1.06"]
12mm
[0.47"]
8mm
[0.31"]
M5
12mm
[0.47"]
9mm
[0.36"]
12mm
[0.47"]
5.2mm
[0.20"]
Mounting Bracket
Dimensions
34 mm
[1.34"]
Earth
Terminal
2 - 5.3 mm dia. holes
for mounting to frame
46 mm
[1.81"]
A-071-G (Hex flat up)
Without spring loaded shaft
Without spring loaded shaft
MAX
M5
170mm
(6.69")
-Ambient Temperature
32~104º F (0~40ºC)
(Hex point
up)
-C-081
< 90%
Relative
Humidity
(No condensation)
-No Corrosive Gases
-Vibration < 0.5G
*Tube lengths available in 50mm increments
2.9 mm
[.11"]
MAX
36 mm
[1.42"]
2 - 5.3 mm dia. holes
for mounting to frame
46 mm
[1.81"]
Waterproof (IP-65) with crowned tube standard
MIN
9 mm
[.35"]
30 mm
[1.18"]
Minimum Tube Lengths and Options
16 mm
[.63"]
9 mm
[0.35"]
Protection
-Motor is protected from
overheating
44 mm
[1.73"]
Operation
-Cycle: 1s ON; 1s OFF
-Continuous or Intermittent duty
-Do Not Exceed 150%
of No-Load Speed
C Series low
profile bracket (optional)
Environment
RP Round belt pulley end cap with waterproof (IP-65)
570mm
(22.44")
170mm
(6.69")
MIN
C-071 (Hex flat up)
MAX
570mm
(22.44")
Performance Data
6
5
4
19mm
[0.75"]
ERR
0.60
0.64
0.66
0.69
0.72
0.75
0.77
0.80
PWR
0.10
0.18
0.23
0.28
0.34
0.39
0.44
0.50
3
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2
11.7
11.7
11.7
11.7
11.7
11.7
11.7
11.7
1
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
F
19.0
32.5
42.7
52.2
61.7
72.2
81.0
94.5
F
on
off
on
off
on
off
on
off
O
on
on
off
off
on
on
off
off
116mm
[4.57"]
4 - Ø4.5mm
20mm
[0.79"]
30
on
on
on
on
off
off
off
off
㻯㻮㻙㻜㻝㻤㻺
34mm
[1.34"]
CB-018N 8 speed settings
DIP Switch Setting
No-load Tangential Torque
Speed
Current (A)
speed
force (lb)
(lb·in)
SW1-4 SW1-5 SW1-6
Code
(FPM)
Starting
Starting Starting No-Load Rated
CN2-5 CN2-4 CN2-3
124mm
[4.88"]
Wiring
12 34 5 6
1 2
NPN Only
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
9
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
PM486FE DC Motor Driven Roller
Diameter: 1.91" (48.6mm)
Voltage: 24V DC
-Brushless DC motor provides long life
-ABEC 1 Bearings
-DOM, zinc plated, carbon steel tube
Features
-One shaft mounting
-7/16" Hex (plain) shafts standard
-Dynamic brake
Mounting Brackets
Dimensions
A Series bracket (standard)
9 mm
[.35"]
16 mm
[.63"]
M5
11.1mm
[0.44"]
5mm
[0.20"]
2 - 5.3 mm dia. holes
for mounting to frame
46 mm
[1.81"]
A-071-G (Hex flat up)
5mm
[0.20"]
Tube Length in mm (TL)
34 mm
[1.34"]
Earth
Terminal
300mm
[11.81"]
C Series low profile bracket (optional)
Between Frame in mm (BF)
BF=TL+15mm
16 mm
[.63"]
Standard Hex Shafts with Grooved Tube
9 mm
[.35"]
M5
C-081 (Hex point up)
30 mm
[1.18"]
12mm
[0.47"]
2.9 mm
[.11"]
45 mm
[1.77"]
17mm
[0.67"]
9 mm
[0.35"]
32mm
[1.26"]
Ø48.6mm
[1.91"]
50mm
[1.97"]
44 mm
[1.73"]
15mm
[0.59"]
A-081-G (Hex point up)
60 mm
[2.36"]
51 mm
[2.01"]
9 mm
[.35"]
2.9 mm
[.11"]
36 mm
[1.42"]
2 - 5.3 mm dia. holes
for mounting to frame
46 mm
[1.81"]
C-071 (Hex flat up)
15mm
15mm
[0.59"]
[0.59"]
13 MM
17mm
17mm
[0.67"]
[0.67"]
Ø48.6mm
Ø48.6mm
[1.91"]
[1.91"]
11.1mm
11.1mm
[0.44"]
[0.44"]
10 MM
(.39")
21 MM
21 MM
(.83")
[.83"]
300mm
300mm
[11.81"]
[11.81"]
A
5mm
5mm
[0.20"]
[0.20"]
10 MM
[.39"]
Tube Length
Lengthininmm
mm(TL)
(TL)
Tube
BetweenFrame
Frameininmm
mm(BF)
(BF)
Between
BF=TL+21mm
BF=TL+21mm
12mm
12mm
[0.47"]
[0.47"]
13mm
13mm
[0.51"]
[0.51"]
15mm
15mm
[0.59"]
[0.59"]
12mm
12mm
[0.47"]
[0.47"]
A
Wrench Shoulder
Detail A-A
Dimensions
Wrench Shoulder
Dimensions
18.5 MM
18.5 MM
(.73")
[.73"]
M12 X 1.25
Toothed Lock Washer
JQ - (Threaded Hex Shaft with Wrench Shoulder) / Straight Tube
All shaft configurations available with grooved tube or straight tube.
Operation
-Cycle: 1s ON; 1s OFF
-Continuous or Intermittent duty
-Do Not Exceed 150%
of No-Load Speed
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
Protection
-Thermal overload 221ºF
(105ºC) in the motor
when used with an
Itoh Denki controller
10
*Note: Nuts are to be tightened to 22.1 lb-ft ± 10%
Environment
-Ambient Temperature
32~104º F (0~40ºC)
- < 90% Relative Humidity
(No condensation)
-No Corrosive Gases
-Vibration < 0.5G
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
PM486FE Performance Data
CB-016S7 20 speed settings
1
Low
13.8
13.8
13.8
13.8
49.2
49.2
49.2
49.2
174.8
174.8
174.8
174.8
Tangential
Force (lb)
Starting
Torque
(lb·in)
Starting
95.0
98.5
95.0
77.4
30.3
31.5
30.3
24.7
9.7
10.1
9.7
7.9
90.8
94.2
90.8
74.0
29.0
30.1
29.0
23.7
9.3
9.6
9.3
7.6
Performance data with other cards available upon request.
78
52mm
[2.05"]
[0.20"]
5mm (x2)
[0.18"]
4.5mm (x2)
4.5mm
[0.18"]
SW1
3mm
[0.12"]
23mm
[0.91"]
CB-016S7
SW5
LED1
LED2
LED3
Current (A)
161mm
[6.34"]
At highest speed
Starting No-Load
3.6
4.0
4.0
4.0
3.6
4.0
4.0
4.0
3.6
4.0
4.0
4.0
0.3
0.4
0.5
0.8
0.3
0.4
0.5
0.8
0.3
0.4
0.5
0.8
Rated
1.4
1.8
2.2
2.6
1.4
1.8
2.2
2.6
1.4
1.8
2.2
2.6
Ø5mm
[0.18"]
SW1
SPEED
SET
SW2
SW3
0V
IN
24V
0V
24V
LED 3
LED 2
LED 1
50mm
[1.96"]
High
24.0
34.1
44.7
55.3
85.3
121.4
159.1
196.8
303.2
431.5
565.6
699.7
SW3 0
ACC
DEC
40mm
[1.57"]
SW3 9
90 1
ERR
OUT A
V-IN
DIR/ESTOP
INPUT
5
8
10
17
20
30
45
60
70
100
140
210
No-load (FPM)
1.6
2.1
2.4
2.8
1.6
2.1
2.4
2.8
1.6
2.1
2.4
2.8
PWR
SENSOR
ERR
HB-510N 10 speed settings
Speed
Code
0.3
0.4
0.5
0.8
0.3
0.4
0.5
0.8
0.3
0.4
0.5
0.8
CN2
3mm
[0.12"]
2
3.6
4.0
4.0
4.0
3.6
4.0
4.0
4.0
3.6
4.0
4.0
4.0
1NPN/PNP OUT
2SEN/SYN
3GEAR SET 2
4GEAR SET 1
6ZP2/ZP1
6ZE/ZB
7DIRECTION
8STOP/RUN
3
90.8
94.2
90.8
74.0
29.0
30.1
29.0
23.7
9.3
9.6
9.3
7.6
Rated
1ERR BLOCK
2DIR BLOCK
3ESTOP BLOCK
4SPEED BLOCK L
5SPEED BLOCK R
6INT/EXT
7DIR/ESTOP
8AUTO/MANU
Gear
Stage
95.0
98.5
95.0
77.4
30.3
31.5
30.3
24.7
9.7
10.1
9.7
7.9
120mm
[4.72"]
At highest speed
Starting No-Load
27mm
[1.05"]
1
5
8
10
17
20
30
45
60
70
100
140
210
Low
6.9
6.9
6.9
6.9
24.6
24.6
24.6
24.6
87.6
87.6
87.6
87.6
129mm
[5.08"]
Current (A)
23
2
High
24.0
34.1
44.7
55.3
85.3
121.4
159.1
196.8
303.2
431.5
565.6
699.7
Torque
(lb·in)
Starting
HB-510N
3
Speed SW1-5 on SW1-5 off
Code
SW5 9
SW5 0
Tangential
Force (lb)
Starting
45 6
Gear
Stage
No-load (FPM)
169mm
[6.67"]
Minimum Tube Lengths and Options
With spring loaded shaft
Non Grooved Tube
VP or VG belt pulley end cap
1
Gear Stages
2
3
Gear Stages
1
2
3
P2 Double Groove Tube (50/32)
244mm 267mm 290mm
(9.61") (10.51") (11.42")
293mm 316mm 339mm
(11.54") (12.44") (13.35")
244mm 267mm 290mm
(9.61") (10.51") (11.42")
BR Brake and P2 Double Groove (50/32)
Laggings
Wide range of rubber laggings available
357mm 381mm 404mm
(14.06") (15.00") (15.91")
LT Low Temperature
LT Low temperature option available
WA Waterproof (IP-65) and P2 Double Groove (50/32)
302mm 325mm 348mm
(11.89") (12.80") (13.70")
VP - Between Frame -35mm = Tube length
VG - Between Frame -41mm = Tube length
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
11
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
PM486FS DC Motor Driven Roller
-Brushless DC motor provides long life
-ABEC 1 Bearings
-DOM, zinc plated, carbon steel tube
Features
-Time tested performance
-Strong motor torque
-7/16" Hex (plain) shafts standard
-Torque transmitted through output tube
-Dynamic brake
-Dual shaft mounting
Mounting Brackets
Dimensions
50mm
[1.97"]
17mm
[0.67"]
32mm
[1.26"]
20mm
[0.79"]
A Series bracket (standard)
11.1mm
[0.44"]
300mm
[11.81"]
5mm
[0.20"]
M5
5mm
[0.20"]
Tube Length in mm (TL)
9 mm
[.35"]
A-081-G (Hex point up)
60 mm
[2.36"]
51 mm
[2.01"]
12mm
[0.47"]
Ø48.6mm
[1.91"]
16 mm
[.63"]
9 mm
[.35"]
45 mm
[1.77"]
Diameter: 1.91" (48.6mm)
Voltage: 24V DC
Between Frame in mm (BF)
BF=TL+15mm
2.9 mm
[.11"]
Standard Hex Shafts with Grooved Tube
34 mm
[1.34"]
Earth
Terminal
(Also available with Straight Tube)
20mm
[0.79"]
17mm
[0.67"]
2 - 5.3 mm dia. holes
for mounting to frame
46 mm
[1.81"]
A-071-G (Hex flat up)
9 mm
[.35"]
Out of frame
7mm
[0.28"]
In frame
8mm
[0.32"]
Tube Length in mm (TL)
M5
Between Frame in mm (BF)
BF=TL+15mm
2.9 mm
[.11"]
JR - (Yoke Style) Hex Shafts / Straight Tube
17mm
[0.67"]
Ø48.6mm
[1.91"]
300mm
[11.81"]
Out of frame
7mm
[0.28"]
In frame
2 - 5.3 mm dia. holes
for mounting to frame
C-071 (Hex flat up)
JT shaft standard mounting hardware:
toothed lock washer and nut*
21 MM
(.83")
11.1mm
[0.44"]
9mm
[0.35"]
36 mm
[1.42"]
46 mm
[1.81"]
17mm
[0.67"]
10 MM
(.39")
12mm
[0.47"]
C-081 (Hex point up)
30 mm
[1.18"]
300mm
[11.81"]
9mm
[0.35"]
9 mm
[0.35"]
16 mm
[.63"]
11.1mm
[0.44"]
44 mm
[1.73"]
12mm
[0.47"]
Ø48.6mm
[1.91"]
C Series low profile bracket (optional)
18.5 MM
(.73")
*Note: Nuts are to be tightened to 22.1 lb-ft ± 10%
8mm
[0.32"]
Tube Length in mm (TL)
Between Frame in mm (BF)
BF=TL+15mm
JT - (Threaded) Hex Shafts / Straight Tube
All shaft configurations available with grooved tube or straight tube.
Operation
-Cycle: 1s ON; 1s OFF
-Continuous or Intermittent duty
-Do Not Exceed 150%
of No-Load Speed
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
Protection
-Thermal overload 221ºF
(105ºC) in the motor
when used with an
Itoh Denki controller
12
Environment
-Ambient Temperature
32~104º F (0~40ºC)
- < 90% Relative Humidity
(No condensation)
-No Corrosive Gases
-Vibration < 0.5G
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
PM486FS Performance Data
129mm
[5.08"]
0.3
0.4
0.5
0.6
0.3
0.4
0.5
0.6
1.6
2.1
2.4
2.8
1.6
2.1
2.4
2.8
90 1
52mm
[2.05"]
Rated
ACC
DEC
SW5
LED1
LED2
LED3
4.5mm
[0.18"]
SW1
23mm
[0.91"]
3.6
4.0
4.0
4.0
3.6
4.0
4.0
4.0
5mm (x2)
Starting No-Load
3mm
[0.12"]
88.8
92.1
88.8
75.6
26.7
27.7
26.7
22.8
78
92.8
96.3
92.8
79.1
27.9
29.0
27.9
23.8
Current (A)
At highest speed
[0.18"]
Torque
(lb·in)
Starting
CB-016S7
Low
7.2
7.2
7.2
7.2
26.6
26.6
26.6
26.6
Tangential
Force (lb)
Starting
45 6
2
High
24.5
34.9
45.8
56.6
92.6
131.8
172.7
213.7
SW1-5 off
SW5 0
23
3
5
8
10
15
20
30
45
55
No-load (FPM)
SW1-5 on
SW5 9
4.5mm (x2)
CB-016S7 20 speed settings
Gear Speed
Stage Code
[0.20"]
120mm
[4.72"]
161mm
[6.34"]
Performance data with other cards available upon request.
0.3
0.4
0.5
0.6
0.3
0.4
0.5
0.6
1.4
1.8
2.2
2.5
1.4
1.8
2.2
2.5
MIN
MIN
SW1
SW2
SW3
0V
IN
24V
0V
24V
LED 3
LED 2
LED 1
CN2
169mm
[6.67"]
Minimum Tube Lengths and Options
Without spring loaded shaft
With spring loaded shaft
Non Grooved Tube
Ø5mm
[0.18"]
SPEED
SET
50mm
[1.96"]
3.6
4.0
4.0
4.0
3.6
4.0
4.0
4.0
Rated
40mm
[1.57"]
88.8
92.1
88.8
75.6
26.7
27.7
26.7
22.8
Starting No-Load
ERR
OUT A
V-IN
DIR/ESTOP
INPUT
92.8
96.3
92.8
79.1
27.9
29.0
27.9
23.8
Current (A)
At highest speed
PWR
SENSOR
ERR
Torque
(lb·in)
Starting
1NPN/PNP OUT
2SEN/SYN
3GEAR SET 2
4GEAR SET 1
6ZP2/ZP1
6ZE/ZB
7DIRECTION
8STOP/RUN
Low
14.1
14.1
14.1
14.1
53.5
53.5
53.5
53.5
Tangential
Force (lb)
Starting
1ERR BLOCK
2DIR BLOCK
3ESTOP BLOCK
4SPEED BLOCK L
5SPEED BLOCK R
6INT/EXT
7DIR/ESTOP
8AUTO/MANU
High
24.5
34.9
45.8
56.6
92.6
131.8
172.7
213.7
SW3 0
3mm
[0.12"]
2
5
8
10
15
20
30
45
55
SW3 9
27mm
[1.05"]
3
HB-510N 10 speed settings
No-load (FPM)
HB-510N
Gear Speed
Stage Code
Gear Stages
2
3
P2 Double Groove Tube (50/32)
Gear Stages
2
3
254mm 277mm
(10.00") (10.91")
305mm 328mm
(12.01") (12.91")
MIN
305mm 328mm
(12.01") (12.91")
BR Brake and P2 Double Groove (50/32)
MIN
Laggings
Wide range of rubber laggings available
369mm 392mm
(14.53") (15.43")
WA Waterproof (IP-65) and P2 Double Groove (50/32)
MIN
315mm 338mm
(12.40") (13.31")
*Note: JT shafts add 10mm to minimum tube length
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
13
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
PM486FP DC Motor Driven Roller
Diameter: 1.91" (48.6mm)
Voltage: 24V DC
-Brushless DC motor provides long life
-ABEC 1 Bearings
-DOM, zinc plated, carbon steel tube
Features
-Strong motor torque
-7/16" Hex (threaded) shafts standard
-Torque transmitted through output tube
-Dynamic brake
-Dual shaft mounting
Mounting Brackets
Dimensions
P-0C1 Hex Point Up
50mm
[1.97"]
17mm
[0.67"]
32mm
[1.26"]
50 MM
[1.97"]
17mm
[0.67"]
18.5 MM
[.73"]
300mm
[11.81"]
Out of frame
7mm
[0.28"]
In frame
M12 X 1.25
Ninja Bracket
8mm
[0.31"]
Tube Length in mm (TL)
Ø12.8MM
[0.51"]
1.5MM
[0.06"]
9mm
[0.35"]
22 MM
[.87"]
21 MM
[.83"]
10MM
[0.39"]
12mm
[0.47"]
Ø48.6mm
[1.91"]
10 MM
[.39"]
11.1mm
[0.44"]
3 MM
[.12"]
40 MM
[1.58"]
33MM
[1.30"]
P-0B1 Hex Flat Up
Between Frame in mm (BF)
BF=TL+15mm
Standard Threaded Hex Shafts with Grooved Tube
*Note: Nuts are to be tightened to 22.1 lb-ft ± 10%
300mm
[11.81"]
9mm
[0.35"]
Out of frame
7mm
[0.28"]
In frame
8mm
[0.31"]
Tube Length in mm (TL)
M5 M5
3 mm
[.12"]
2.9 mm
[.11"]
Between Frame in mm (BF)
BF=TL+15mm
JR - (Yoke Style) Hex Shafts / Straight Tube
A-081-G2 (Hex point up)
45 mm
11.1mm
[0.44"]
A-081-G2 (Hex point up)
45
mm
[1.77"]
[1.77"]
Ø48.6mm
[1.91"]
12mm
[0.47"]
[.35"]
9 [.35"]
mm
[.35"]
[.63"]
9 mm
9 mm
[.35"]
[2.01"]
16 mm
16 mm
[.63"]
60 mm
[2.36"]
60 mm
[2.36"]
51 mm
51 mm
[2.01"]
20mm
[0.79"]
17mm
[0.67"]
9 mm
Mounting bracket for JR shaft
Earth
Terminal
Earth
Terminal
34 mm
[1.34"]
34
mm
[1.34"]
46 mm
[1.81"]
2 - 5.3 mm dia. hole
for2mounting
frame
- 5.3 mmtodia.
hole
for mounting to frame
46 mm
[1.81"]
A-071-G2
(Hex flat up)
A-071-G2 (Hex flat up)
All shaft configurations available with grooved tube or straight tube.
Operation
-Cycle: 1s ON; 1s OFF
-Continuous or Intermittent duty
-Do Not Exceed 150%
of No-Load Speed
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
Protection
-Thermal overload 221ºF
(105ºC) in the motor
when used with an
Itoh Denki controller
14
Environment
-Ambient Temperature
32~104º F (0~40ºC)
- < 90% Relative Humidity
(No condensation)
-No Corrosive Gases
-Vibration < 0.5G
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
PM486FP Performance Data
129mm
[5.08"]
CB-016S7 20 speed settings
1
HB-510N 10 speed settings
Low
14.1
14.1
14.1
14.1
53.5
53.5
53.5
53.5
243.0
243.0
243.0
243.0
149.4
141.9
119.5
104.6
45.0
42.7
36.0
31.5
11.2
10.7
9.0
7.9
142.9
135.7
114.3
100.0
43.0
40.9
34.4
30.1
10.7
10.2
8.6
7.5
78
52mm
[2.05"]
[0.20"]
5mm (x2)
[0.18"]
4.5mm (x2)
ACC
DEC
SW5
LED1
LED2
LED3
4.5mm
[0.18"]
3mm
[0.12"]
23mm
[0.91"]
SW1
161mm
[6.34"]
Current (A)
At highest speed
Starting No-Load
Performance data with other cards available upon request.
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
0.4
0.5
0.7
0.9
0.4
0.5
0.7
0.9
0.4
0.5
0.7
0.9
Rated
1.9
2.5
3.0
3.2
1.9
2.5
3.0
3.2
1.9
2.5
3.0
3.2
Minimum Tube Lengths and Options
With spring loaded shaft
Ø5mm
[0.18"]
SW1
SPEED
SET
SW2
SW3
0V
IN
24V
0V
24V
LED 3
LED 2
LED 1
50mm
[1.96"]
SW3 0
90 1
40mm
[1.57"]
High
26.1
36.5
48.2
56.6
98.4
137.8
182.0
213.7
448.3
627.6
829.3
973.5
Torque
(lb·in)
Starting
2.0
2.7
3.2
3.5
2.0
2.7
3.2
3.5
2.0
2.7
3.2
3.5
ERR
OUT A
V-IN
DIR/ESTOP
INPUT
SW3 9
Tangential
Force (lb)
Starting
Rated
PWR
SENSOR
ERR
No-load (FPM)
0.4
0.5
0.7
0.9
0.4
0.5
0.7
0.9
0.4
0.5
0.7
0.9
CB-016S7
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
CN2
3mm
[0.12"]
2
Starting No-Load
1NPN/PNP OUT
2SEN/SYN
3GEAR SET 2
4GEAR SET 1
6ZP2/ZP1
6ZE/ZB
7DIRECTION
8STOP/RUN
3
5
8
10
15
20
30
45
55
100
140
190
255
142.9
135.7
114.3
100.0
43.0
40.9
34.4
30.1
10.7
10.2
8.6
7.5
1ERR BLOCK
2DIR BLOCK
3ESTOP BLOCK
4SPEED BLOCK L
5SPEED BLOCK R
6INT/EXT
7DIR/ESTOP
8AUTO/MANU
Gear Speed
Stage Code
149.4
141.9
119.5
104.6
45.0
42.7
36.0
31.5
11.2
10.7
9.0
7.9
120mm
[4.72"]
27mm
[1.05"]
1
Low
7.2
7.2
7.2
7.2
26.6
26.6
26.6
26.6
121.4
121.4
121.4
121.4
Current (A)
At highest speed
23
2
High
26.1
36.5
48.2
56.6
98.4
137.8
182.0
213.7
448.3
627.6
829.3
973.5
Torque
(lb·in)
Starting
HB-510N
3
5
8
10
15
20
30
45
55
100
140
190
255
No-load (FPM)
Tangential
SW1-5 on SW1-5 off
Force (lb)
SW5 9
SW5 0
Starting
45 6
Gear Speed
Stage Code
169mm
[6.67"]
Gear Stages
Non Grooved Tube
Gear Stages
1
2
3
1
2
3
322mm 345mm 368mm
(12.68") (13.58") (14.49")
Laggings
Wide range of rubber laggings available
P2 Double Groove Tube (50/32)
LT Low Temperature
LT Low temperature option available
BR Brake and P2 Double Groove (50/32)
PV or GV belt pulley end cap
WA Waterproof (IP-65) and P2 Double Groove (50/32)
322mm 345mm 368mm
(12.68") (13.58") (14.49")
386mm 409mm 432mm
(15.20") (16.10") (17.01")
322mm 345mm 368mm
(12.68") (13.58") (14.49")
330mm 353mm 376mm
(12.99") (13.90") (14.80")
PV - Between Frame -35mm = Tube length
GV - Between Frame -41mm = Tube length
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
15
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
PM486FH DC Motor Driven Roller
Diameter: 1.91" (48.6mm)
Voltage: 24V DC
Features
-Brushless DC motor provides long life
-ABEC 1 Bearings
-DOM, zinc plated, carbon steel tube
-Improved motor torque
-7/16" Hex (plain) shafts standard
-Torque transmitted through output tube
-Dynamic brake
-Dual shaft mounting
-12 pin connector
Dimensions
20mm
[0.79"]
12mm
[0.47"]
Ø48.6mm
[1.91"]
17mm
[0.67"]
11.1mm
[0.44"]
300mm
[11.81"]
9mm
[0.35"]
Out of frame
7mm
[0.28"]
In frame
8mm
[0.31"]
Tube Length in mm (TL)
Between Frame in mm (BF)
BF=TL+15mm
M5
2.9 mm
[.11"]
A-081-G2 (Hex point up)
45 mm
[1.77"]
9 mm
[.35"]
60 mm
[2.36"]
51 mm
[2.01"]
16 mm
[.63"]
9 mm
[.35"]
Mounting Bracket
34 mm
[1.34"]
Earth
Terminal
2 - 5.3 mm dia. hole
for mounting to frame
46 mm
[1.81"]
A-071-G2 (Hex flat up)
Operation
-Cycle: 1s ON; 1s OFF
-Continuous or Intermittent duty
-Do Not Exceed 150%
of No-Load Speed
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
Protection
-Thermal overload 221ºF
(105ºC) in the motor
when used with an
Itoh Denki controller
16
Environment
-Ambient Temperature
32~104º F (0~40ºC)
- < 90% Relative Humidity
(No condensation)
-No Corrosive Gases
-Vibration < 0.5G
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
PM486FH Performance Data
129mm
[5.08"]
CB-030S 20 speed settings
2.6
3.3
3.6
3.7
2.6
3.3
3.6
3.7
90 1
59mm
[2.32"]
12 mm
[0.47"]
Rated
ACC
DEC
LED1
LED2
LED3
SW4
SW1
3.5mm
[0.138"]
3mm
[0.12"]
23mm
[0.91"]
0.3
0.4
0.7
1.0
0.3
0.4
0.7
1.0
[0.20"]
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
5mm (x2)
51.3
53.1
46.9
43.4
12.4
13.3
11.5
10.6
78
53.4
55.9
49.3
45.1
13.3
14.0
12.3
11.3
At highest speed
Starting No-Load
122mm
[4.80"]
[0.18"]
Low
26.6
26.6
26.6
26.6
121.7
121.7
121.7
121.7
4.5mm (x2)
High
88.9
133.2
187.0
213.9
405.4
606.8
851.8
973.5
Current (A)
23
1
Tangential Torque
SW1-5 on SW1-5 off
(lb·in)
Force (lb)
SW5 9
SW5 0
Starting Starting
CB-030S
2
20
30
45
55
100
140
190
255
No-load (FPM)
45 6
Gear Speed
Stage Code
Minimum Tube Lengths and Options
Without spring loaded shaft
With spring loaded shaft
Gear Stages
1
2
Non Grooved Tube
Lagging
Wide range of rubber laggings available
PV or GV belt pulley end cap
Gear Stages
1
2
322mm 345mm
(12.68") (13.58")
P2 Double Groove Tube (50/32)
322mm 345mm
(12.68") (13.58")
MIN
322mm 345mm
(12.68") (13.58")
PV - Between Frame -35mm = Tube length
GV - Between Frame -41mm = Tube length
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
17
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
PM486XE DC Motor Driven Roller
-Brushless DC motor provides long life
-ABEC 1 Bearings
-DOM, zinc plated, carbon steel tube
Features
-Internal driver card
simplifies wiring direct to roller
-Stable speed function
without various torque
-7/16" Hex (plain) shafts standard
-Highly durable metallic gears
Mounting Brackets
Dimensions
15mm
[0.59"]
A Series bracket (standard)
17mm
[0.67"]
9 mm
[.35"]
16 mm
[.63"]
M5
11.1mm
[0.44"]
300mm
[11.81"]
5mm
[0.20"]
5mm
[0.20"]
Tube Length in mm (TL)
2.9 mm
[.11"]
A-081-G (Hex point up)
60 mm
[2.36"]
51 mm
[2.01"]
12mm
[0.47"]
Ø48.6mm
[1.91"]
9 mm
[.35"]
45 mm
[1.77"]
Diameter: 1.91" (48.6mm)
Voltage: 24V DC
34 mm
[1.34"]
Earth
Terminal
Between Frame in mm (BF)
BF=TL+15mm
2 - 5.3 mm dia. holes
for mounting to frame
46 mm
[1.81"]
A-071-G (Hex flat up)
C Series low profile bracket (optional)
9 mm
[0.35"]
16 mm
[.63"]
NPN Signal INPUT
PNP Signal INPUT
+24V DC
0V
Red
Black
Green
White
Violet
Orange
Blue
M5
Common
RUN Input
To Controller
DIR Input
Speed Variation Input 0 ~ 10V DC
Error Signal Output
2.9 mm
[.11"]
5
BLUE (ERROR)
ORANGE (SPEED)
VIOLET (DIR)
4
3
2
1
C-071 (Hex flat up)
Common
RUN Input
To Controller
DIR Input
Speed Variation Input 0 ~ 10V DC
Error Signal Output
Optional cable-less Snap-In-Drive connector
For use with Snap-In-Drive ZPA controller
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
M8 5 PIN LAYOUT
PIN 4
BLACK: RUN / STOP
PIN-1 NOTCH MARK
PIN 1
BROWN: 24V
RED (+24V DC)
BLACK (0V)
GREEN (COM)
[CONNECT TO 0V FOR PNP INPUT]
[CONNECT TO 24V FOR NPN INPUT]
WHITE (RUN)
Operation
-Cycle: 1s ON; 1.5s OFF
-Continuous or Intermittent duty
-Do Not Exceed 150%
of No-Load Speed
2 - 5.3 mm dia. holes
for mounting to frame
46 mm
[1.81"]
PIN 2
WHITE: DIRECTION
6
36 mm
[1.42"]
+24V DC
0V
Red
Black
Green
White
Violet
Orange
Blue
Standsrd 7 pin JST connector (XHP-7)
For use with terminal block A-B70 / A-B80
7
C-081 (Hex point up)
44 mm
[1.73"]
9 mm
[.35"]
30 mm
[1.18"]
Wiring
PIN 5
GRAY: SPEED CONTROL
PIN 3
BLUE: 0V
See page 37 for more details
Protection
-Motor is protected from
overheating
-Undervoltage error
-Back EMF error
18
Environment
-Ambient Temperature
32~104º F (0~40ºC)
- < 90% Relative Humidity
(No condensation)
-No Corrosive Gases
-Vibration < 0.5G
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
PM486XE Performance Data
Standard
Gear Speed
Stage Code
3
2
1
17
30
60
100
10 Speed Settings
No-load (FPM)
External Voltage
9.5 V
0.5 V
High
55.4
93.2
196.8
331.6
Low
6.9
11.8
24.6
41.3
Tangential
Force (lb)
Starting
Torque
(lb·in)
Starting
60.3
41.2
19.6
13.3
57.5
39.4
18.6
12.7
Current (A)
At highest speed
Starting
No-Load
Rated
2.0
0.3
1.7
A-B70-G & A-B80-G I/O Terminal Block
- I/O terminal on mounting bracket
- Built in 10kΩ resistor for speed variation
- Speed adjustable from 12.5% to 100%
- Reverse direction by slide switch
- Green LED indication for 24V DC power
- Red LED indication for motor error
- 24V DC is supplied using cable splice connectors
- RUN and DIR inputs from any 24V DC switching source
*Note: "C007" (70mm) power cable option is required for use with this terminal block
24mm
[0.93"]
A-B80-G Hex Point Up
PLASTIC COVER
CN2
Run
Direction
45mm
[1.77"]
Common
VR1
LED1
EARTH
TERMINAL
SW1
VR1
CN2
2 - 5.3 MM DIA. HOLE
FOR MOUNTING TO FRAME
M5
CN1
LED2
1
60mm
[2.36"]
CN1
LED 1
LED 2
ON
Blue (0V)
34mm
[1.34"]
3mm
[0.11"]
Brown (+24V)
46mm
[1.81"]
A-B70-G Hex Flat Up
To view card wiring diagrams and more information please visit www.itohdenki.com
Minimum Tube Lengths and Options
When ordering error output signal type must be specified:
Option
Signal type
With spring loaded shaft
NN - NPN error output
NP - PNP error output
Non Grooved Tube
1
Gear Stages
2
3
282mm
(11.10")
310mm
(12.20")
Example: PM486XE-60-366-D-024-NN
Gear Stages
1
2
3
P2 Double Groove Tube (50/32)
332mm
(13.07")
334mm 362mm 385mm
(13.15") (14.25") (15.16")
Lagging
Wide range of rubber laggings available
VP or VG pulley end cap
282mm 310mm 332mm
(11.10") (12.20") (13.07")
VP - Between Frame -35mm = Tube length
VG - Between Frame -41mm = Tube length
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
19
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
PM486XP DC Motor Driven Roller
Features
-High Torque
-Internal driver card
simplifies wiring direct to roller
-Stable speed function
without various torque
-7/16" Hex (plain) shafts standard
Mounting Bracket
15mm
[0.59"]
17mm
[0.67"]
16 mm
[.63"]
12mm
[0.47"]
Ø48.6mm
[1.91"]
9 mm
[.35"]
M5
11.1mm
[0.44"]
300mm
[11.81"]
5mm
[0.20"]
2.9 mm
[.11"]
5mm
[0.20"]
Tube Length in mm (TL)
A-081-G2 (Hex point up)
45 mm
[1.77"]
Dimensions
9 mm
[.35"]
-Brushless DC motor provides long life
-ABEC 1 Bearings
-DOM, zinc plated, carbon steel tube
60 mm
[2.36"]
51 mm
[2.01"]
Diameter: 1.91" (48.6mm)
Voltage: 24V DC
34 mm
[1.34"]
Earth
Terminal
Between Frame in mm (BF)
BF=TL+15mm
2 - 5.3 mm dia. hole
for mounting to frame
46 mm
[1.81"]
A-071-G2 (Hex flat up)
Wiring
NPN Signal INPUT
PNP Signal INPUT
Red
Black
Green
White
Violet
Orange
Blue
Red
Black
Green
White
Violet
Orange
Blue
Standard 7 pin JST connector (XHP-7)
For use with terminal block A-B70 / A-B80
+24V DC
0V
Common
RUN Input
To Controller
DIR Input
Speed Variation Input 0 ~ 10V DC
Error Signal Output
7
+24V DC
0V
6
5
4
3
2
PIN-1 NOTCH MARK
RED (+24V DC)
BLACK (0V)
GREEN (COM)
[CONNECT TO 0V FOR PNP INPUT]
[CONNECT TO 24V FOR NPN INPUT]
WHITE (RUN)
BLUE (ERROR)
Common
RUN Input
To Controller
DIR Input
Speed Variation Input 0 ~ 10V DC
Error Signal Output
1
ORANGE (SPEED)
VIOLET (DIR)
Optional cable-less Snap-In-Drive connector
For use with Snap-In-Drive ZPA controller
PIN 2
WHITE: DIRECTION
M8 5 PIN LAYOUT
PIN 4
BLACK: RUN / STOP
PIN 1
BROWN: 24V
PIN 5
GRAY: SPEED CONTROL
PIN 3
BLUE: 0V
See page 37 for more details
Operation
-Cycle: 1s ON; 1.5s OFF
-Continuous or Intermittent duty
-Do Not Exceed 150%
of No-Load Speed
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
Protection
-Motor is protected from
overheating
-Undervoltage error
-Back EMF error
20
Environment
-Ambient Temperature
32~104º F (0~40ºC)
- < 90% Relative Humidity
(No condensation)
-No Corrosive Gases
-Vibration < 0.5G
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
PM486XP Performance Data
Standard
Gear Speed
Stage Code
3
2
1
17
30
60
100
10 Speed Settings
No-load (FPM)
External Voltage
9.5 V
0.5 V
High
55.4
93.2
196.8
331.6
Low
6.9
11.8
24.6
41.3
Tangential
Force (lb)
Starting
Torque
(lb·in)
Starting
78.1
53.3
25.2
17.3
74.6
51.0
24.2
16.5
Current (A)
At highest speed
Starting No-Load
4.0
Rated
0.4
2.0
A-B70 & A-B80 Terminal Block
- I/O terminal on mounting bracket
- Built in 10kΩ resistor for speed variation
- Speed adjustable from 12.5% to 100%
- Reverse direction by slide switch
- Green LED indication for 24V DC power
- Red LED indication for motor error
- 24V DC is supplied using cable splice connectors
- RUN and DIR inputs from any 24V DC switching source
*Note: "C007" (70mm) power cable option is required for use with this terminal block
24mm
[0.93"]
A-B80-G2 Hex Point Up
PLASTIC COVER
CN2
Direction
Run
VR1
LED1
VR1
1
CN2
CN2
2 - 5.3 MM DIA. HOLE
FOR MOUNTING TO FRAME
EARTH
TERMINAL
M5
CN1
LED2
SW1
60mm
[2.36"]
Common
45mm
[1.77"]
CN1
LED 1
LED 2
ON
Blue (0V)
34mm
[1.34"]
3mm
[0.11"]
Brown (+24V)
46mm
[1.81"]
A-B70-G2 Hex Flat Up
To view card wiring diagrams and more information please visit www.itohdenki.com
Minimum Tube Lengths and Options
When ordering error output signal type must be specified:
Option
Signal type
With spring loaded shaft
NN - NPN error output
NP - PNP error output
Non Grooved Tube
1
Gear Stages
2
3
282mm
(11.10")
310mm
(12.20")
Example: PM486XP-60-366-D-024-NN
Gear Stages
1
2
3
P2 Double Groove Tube (50/32)
332mm
(13.07")
334mm 362mm 385mm
(13.15") (14.25") (15.16")
Laggings
Wide range of rubber laggings available
VP or VG pulley end cap
282mm 310mm 332mm
(11.10") (12.20") (13.07")
VP - Between Frame -35mm = Tube length
VG - Between Frame -41mm = Tube length
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
21
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
PM486LD DC Motor Driven Roller
Diameter: 1.91" (48.6mm)
Voltage: 24V DC
Features
-Hall sensorless motor construction
-Brushless DC motor provides long life
-ABEC 1 Bearings
-One shaft mounting
-7/16" Hex (plain) shafts standard
-Dynamic brake
Dimensions
15mm
[0.59"]
32mm
[1.26"]
17mm
[0.67"]
12mm
[0.47"]
Ø48.6mm
[1.91"]
50mm
[1.97"]
11.1mm
[0.44"]
300mm
[11.81"]
5mm
[0.20"]
5mm
[0.20"]
Tube Length in mm (TL)
Between Frame in mm (BF)
BF=TL+15mm
Mounting Brackets
A Series bracket (standard)
M5
2.9 mm
[.11"]
2.9 mm
[.11"]
Earth
Terminal
34 mm
[1.34"]
2 - 5.3 mm dia. holes
for mounting to frame
2 - 5.3 mm dia. holes
for mounting to frame
C-071 (Hex flat up)
A-071-G (Hex flat up)
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
36 mm
[1.42"]
46 mm
[1.81"]
46 mm
[1.81"]
Operation
-Cycle: 1s ON; 1s OFF
-Continuous or Intermittent duty
-Do Not Exceed 150%
of No-Load Speed
C-081 (Hex point up)
30 mm
[1.18"]
M5
45 mm
[1.77"]
60 mm
[2.36"]
51 mm
[2.01"]
A-081-G (Hex point up)
9 mm
[0.35"]
16 mm
[.63"]
9 mm
[.35"]
44 mm
[1.73"]
9 mm
[.35"]
16 mm
[.63"]
9 mm
[.35"]
C Series low profile bracket (optional)
Protection
-Thermal overload 167ºF
(75ºC) in the motor
when used with an
Itoh Denki controller
22
Environment
-Ambient Temperature
32~104º F (0~40ºC)
- < 90% Relative Humidity
(No condensation)
-No Corrosive Gases
-Vibration < 0.5G
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
PM486LD Performance Data
CBM-107FP 10 speed settings
Gear
Stage
Speed
Code
2
80
No-load (FPM)
SW2 9
SW2 0
High
260.2
Low
65.6
Tangential
Force (lb)
Starting
Torque
(lb·in)
Starting
11.7
13.3
Current (A)
At highest speed
Starting No-Load
2.0
Rated
0.5
4.5 mm (x2)
[0.18"]
1.2
106 mm
[4.17"]
CBM-107FP
A/M
I/E
DIR
E/N
ERR
LED1
LED2
49 mm
[1.93"]
0V
24V
PWR
38 mm
[1.48"]
ERR
V-IN
DIR
RUN
SPEED
SW2
SW1
114 mm
[4.49"]
20 mm
[0.79"]
Minimum Tube Lengths and Options
With spring loaded shaft
Non Grooved Tube
VG belt pulley end cap
Gear Stages
2
Gear Stages
2
P2 Double Groove Tube (50/32)
230mm
(9.06")
280mm
(11.00")
230mm
(9.06")
VG - Between Frame -41mm = Tube length
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
23
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
PM570FE DC Motor Driven Roller
Diameter: 2.24" (57.0mm)
Voltage: 24V DC
-Brushless DC motor provides long life
-ABEC 1 Bearings
-DOM, zinc plated, carbon steel tube
Features
-One shaft mounting
-7/16" Hex (plain) shafts standard
-Dynamic brake
Dimensions
15mm
[0.59"]
12mm
[0.47"]
Ø57mm
[2.24"]
17mm
[0.67"]
11.1mm
[0.44"]
300mm
[11.81"]
5mm
[0.20"]
5mm
[0.20"]
Tube Length in mm (TL)
Between Frame in mm (BF)
BF=TL+15mm
Mounting Brackets
9 mm
[0.35"]
16 mm
[.63"]
30 mm
[1.18"]
M5
C-081 (Hex point up)
44 mm
[1.73"]
9 mm
[.35"]
45 mm
[1.77"]
M5
C Series low profile bracket (optional)
A-081-G (Hex point up)
60 mm
[2.36"]
51 mm
[2.01"]
16 mm
[.63"]
9 mm
[.35"]
9 mm
[.35"]
A Series bracket (standard)
2.9 mm
[.11"]
2.9 mm
[.11"]
Earth
Terminal
34 mm
[1.34"]
Operation
-Cycle: 1s ON; 1s OFF
-Continuous or Intermittent duty
-Do Not Exceed 150%
of No-Load Speed
2 - 5.3 mm dia. holes
for mounting to frame
46 mm
[1.81"]
46 mm
[1.81"]
C-071 (Hex flat up)
A-071-G (Hex flat up)
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
36 mm
[1.42"]
2 - 5.3 mm dia. holes
for mounting to frame
Protection
-Thermal overload 221ºF
(105ºC) in the motor
when used with an
Itoh Denki controller
24
Environment
-Ambient Temperature
32~104º F (0~40ºC)
- < 90% Relative Humidity
(No condensation)
-No Corrosive Gases
-Vibration < 0.5G
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
PM570FE Performance Data
CB-016S7 20 speed settings
90 1
52mm
[2.05"]
[0.20"]
5mm (x2)
1.6
2.1
2.4
2.8
1.6
2.1
2.4
2.8
1.6
2.1
2.4
2.8
78
0.3
0.4
0.5
0.8
0.3
0.4
0.5
0.8
0.3
0.4
0.5
0.8
[0.18"]
3.6
4.0
4.0
4.0
3.6
4.0
4.0
4.0
3.6
4.0
4.0
4.0
Rated
4.5mm (x2)
90.8
94.2
90.8
74.0
29.0
30.1
29.0
23.7
9.3
9.6
9.3
7.6
No-Load
ACC
DEC
SW5
LED1
LED2
LED3
4.5mm
[0.18"]
SW1
3mm
[0.12"]
1
81.0
84.0
81.0
66.0
25.8
26.9
25.8
21.1
8.3
8.6
8.3
6.7
120mm
[4.72"]
At highest speed
Starting
23mm
[0.91"]
2
Low
8.6
8.6
8.6
8.6
30.6
30.6
30.6
30.6
109.0
109.0
109.0
109.0
129mm
[5.08"]
Current (A)
23
5
8
10
17
20
30
45
60
70
100
140
210
3
High
28.1
40.0
52.4
64.9
100.0
142.4
186.6
230.8
355.6
506.1
663.4
820.6
Torque
(lb·in)
Starting
CB-016S7
Speed SW1-5 on
SW5 9
Code
Tangential
SW1-5 off
Force (lb)
SW5 0
Starting
45 6
Gear
Stage
No-load (FPM)
HB-510N 10 speed settings
161mm
[6.34"]
Current (A)
At highest speed
Rated
Minimum Tube Lengths and Options
Without spring loaded shaft
With spring loaded shaft
Non Grooved Tube
1
Gear Stages
2
3
252mm
(9.92")
276mm
(10.86")
MIN
300mm
(11.81")
235mm
(9.25")
259mm
(10.20")
282mm
(11.10")
252mm
(9.92")
276mm
(10.86")
300mm
(11.81")
LED 3
LED 2
LED 1
SW2
SW3
50mm
[1.96"]
40mm
[1.57"]
CN2
169mm
[6.67"]
MIN
305mm 329mm 350mm
(12.00") (12.95") (13.78")
BR Brake and Double Groove (65/30)
MIN
370mm 394mm 415mm
(14.57") (15.51") (16.34")
VP V-Belt pulley end cap
MIN
*WT Spring loaded shaft option for WA waterproof
*Waterproof option does not include spring loaded shaft, add WT to model
number to receive spring loaded shaft
Check with your Itoh Denki representative for WA speeds available
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
SW1
0V
IN
24V
0V
24V
Gear Stages
1
2
3
P2 Double Groove Tube (65/30)
Laggings
Wide range of rubber laggings available
WA Waterproof IP-65
Ø5mm
[0.18"]
SPEED
SET
3mm
[0.12"]
1.4
1.8
2.2
2.6
1.4
1.8
2.2
2.6
1.4
1.8
2.2
2.6
ERR
OUT A
V-IN
DIR/ESTOP
INPUT
0.3
0.4
0.5
0.8
0.3
0.4
0.5
0.8
0.3
0.4
0.5
0.8
PWR
SENSOR
ERR
No-Load
1NPN/PNP OUT
2SEN/SYN
3GEAR SET 2
4GEAR SET 1
6ZP2/ZP1
6ZE/ZB
7DIRECTION
8STOP/RUN
Starting
High
Low
5
28.1
16.2
81.0
90.8
3.6
8
40.0
16.2
84.0
94.2
4.0
3
10
52.4
16.2
81.0
90.8
4.0
17
64.9
16.2
66.0
74.0
4.0
20
100.0
57.7
25.8
29.0
3.6
30
142.4
57.7
26.9
30.1
4.0
2
45
186.6
57.7
25.8
29.0
4.0
60
230.8
57.7
21.1
23.7
4.0
70
355.6
205.0
8.3
9.3
3.6
100
506.1
205.0
8.6
9.6
4.0
1
140
663.4
205.0
8.3
9.3
4.0
210
820.6
205.0
6.7
7.6
4.0
Performance data with other cards available upon request.
1ERR BLOCK
2DIR BLOCK
3ESTOP BLOCK
4SPEED BLOCK L
5SPEED BLOCK R
6INT/EXT
7DIR/ESTOP
8AUTO/MANU
Torque
(lb·in)
Starting
27mm
[1.05"]
Tangential
Speed SW1-5 on SW1-5 off
Force (lb)
SW5 9
SW5 0
Code
Starting
HB-510N
Gear
Stage
No-load (FPM)
25
252mm 276mm 300mm
(9.92") (10.86") (11.81")
VP - Between Frame -35mm = Tube length
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
PM605FE DC Motor Driven Roller
Diameter: 2.38" (60.5mm)
Voltage: 24V DC
-Brushless DC motor provides long life
-ABEC 1 Bearings
-DOM, zinc plated, carbon steel tube
Features
-One shaft mounting
-7/16" Hex (plain) shafts standard
-Dynamic brake
Dimensions
15mm
[0.59"]
12mm
[0.47"]
Ø60.5mm
[2.38"]
17mm
[0.67"]
11.1mm
[0.44"]
300mm
[11.81"]
5mm
[0.20"]
5mm
[0.20"]
Tube Length in mm (TL)
Between Frame in mm (BF)
BF=TL+15mm
Mounting Brackets
9 mm
[0.35"]
16 mm
[.63"]
2.9 mm
[.11"]
2.9 mm
[.11"]
34 mm
[1.34"]
Earth
Terminal
2 - 5.3 mm dia. holes
for mounting to frame
2 - 5.3 mm dia. holes
for mounting to frame
C-071 (Hex flat up)
A-071-G (Hex flat up)
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
36 mm
[1.42"]
46 mm
[1.81"]
46 mm
[1.81"]
Operation
-Cycle: 1s ON; 1s OFF
-Continuous or Intermittent duty
-Do Not Exceed 150%
of No-Load Speed
30 mm
[1.18"]
M5
C-081 (Hex point up)
44 mm
[1.73"]
9 mm
[.35"]
45 mm
[1.77"]
M5
C Series low profile bracket (optional)
A-081-G (Hex point up)
60 mm
[2.36"]
51 mm
[2.01"]
16 mm
[.63"]
9 mm
[.35"]
9 mm
[.35"]
A Series bracket (standard)
Protection
-Thermal overload 221ºF
(105ºC) in the motor
when used with an
Itoh Denki controller
26
Environment
-Ambient Temperature
32~104º F (0~40ºC)
- < 90% Relative Humidity
(No condensation)
-No Corrosive Gases
-Vibration < 0.5G
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
PM605FE Performance Data
CB-016S7 20 speed settings
90 1
52mm
[2.05"]
1.6
2.1
2.4
2.8
1.6
2.1
2.4
2.8
1.6
2.1
2.4
2.8
ACC
DEC
SW5
LED1
LED2
LED3
4.5mm
[0.18"]
SW1
23mm
[0.91"]
0.3
0.4
0.5
0.8
0.3
0.4
0.5
0.8
0.3
0.4
0.5
0.8
[0.20"]
Rated
5mm (x2)
3.6
4.0
4.0
4.0
3.6
4.0
4.0
4.0
3.6
4.0
4.0
4.0
No-Load
78
90.8
94.2
90.8
74.0
29.0
30.1
29.0
23.7
9.3
9.6
9.3
7.6
120mm
[4.72"]
At highest speed
Starting
[0.18"]
76.3
79.1
76.3
62.2
24.3
25.3
24.3
19.8
7.8
8.1
7.8
6.3
129mm
[5.08"]
Current (A)
4.5mm (x2)
Torque
(lb·in)
Starting
3mm
[0.12"]
1
Low
8.6
8.6
8.6
8.6
30.6
30.6
30.6
30.6
109.0
109.0
109.0
109.0
Tangential
Force (lb)
Starting
23
2
5
8
10
17
20
30
45
60
70
100
140
210
High
29.9
42.4
55.6
68.8
106.2
151.1
198.1
245.0
377.4
537.2
704.1
871.0
SW1-5 off
SW5 0
CB-016S7
3
SW1-5 on
SW5 9
45 6
Gear Speed
Stage Code
No-load (FPM)
HB-510N 10 speed settings
161mm
[6.34"]
Current (A)
At highest speed
Rated
Minimum Tube Lengths and Options
Without spring loaded shaft
With spring loaded shaft
Non Grooved Tube
MIN
1
Gear Stages
2
3
252mm
(9.92")
276mm
(10.86")
MIN
300mm
(11.81")
235mm
(9.25")
259mm
(10.20")
282mm
(11.10")
252mm
(9.92")
276mm
(10.86")
300mm
(11.81")
SW1
LED 3
LED 2
LED 1
SW2
SW3
0V
IN
24V
0V
24V
CN2
169mm
[6.67"]
Gear Stages
1
2
3
P2 Double Groove Tube (65/30)
305mm 329mm 350mm
(12.00") (12.95") (13.78")
MIN
Laggings
Wide range of rubber laggings available
WA Waterproof IP-65
Ø5mm
[0.18"]
SPEED
SET
50mm
[1.96"]
1.4
1.8
2.2
2.6
1.4
1.8
2.2
2.6
1.4
1.8
2.2
2.6
40mm
[1.57"]
0.3
0.4
0.5
0.8
0.3
0.4
0.5
0.8
0.3
0.4
0.5
0.8
3mm
[0.12"]
No-Load
ERR
OUT A
V-IN
DIR/ESTOP
INPUT
Starting
High
Low
5
29.9
17.2
76.3
90.8
3.6
8
42.4
17.2
79.1
94.2
4.0
3
10
55.6
17.2
76.3
90.8
4.0
17
68.8
17.2
62.2
74.0
4.0
20
106.2
61.2
24.3
29.0
3.6
30
151.1
61.2
25.3
30.1
4.0
2
45
198.1
61.2
24.3
29.0
4.0
60
245.0
61.2
19.8
23.7
4.0
70
377.4
217.6
7.8
9.3
3.6
100
537.2
217.6
8.1
9.6
4.0
1
140
704.1
217.6
7.8
9.3
4.0
210
871.0
217.6
6.3
7.6
4.0
Performance data with other cards available upon request.
PWR
SENSOR
ERR
Torque
(lb·in)
Starting
1NPN/PNP OUT
2SEN/SYN
3GEAR SET 2
4GEAR SET 1
6ZP2/ZP1
6ZE/ZB
7DIRECTION
8STOP/RUN
Tangential
Force (lb)
Starting
1ERR BLOCK
2DIR BLOCK
3ESTOP BLOCK
4SPEED BLOCK L
5SPEED BLOCK R
6INT/EXT
7DIR/ESTOP
8AUTO/MANU
SW1-5 off
SW5 0
27mm
[1.05"]
SW1-5 on
SW5 9
HB-510N
Gear Speed
Stage Code
No-load (FPM)
BR Brake and P2 Double Groove (65/30)
370mm 394mm 415mm
(14.57") (15.51") (16.34")
MIN
PC Crowned Tube
MIN
*WT Spring loaded shaft option for WA waterproof
252mm 276mm 300mm
(9.92") (10.86") (11.81")
*Waterproof option does not include spring loaded shaft, add WT to model
number to receive spring loaded shaft
Check with your Itoh Denki representative for WA speeds available
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
27
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
PM635FS DC Motor Driven Roller
Diameter: 2.50" (63.5mm)
Voltage: 24V DC
-Brushless DC motor provides long life
-ABEC 1 Bearings
-DOM, carbon steel tube
Features
-Heavy duty pallet handling
-Low profile requirement of pallet handling
-11/16" Threaded hex shaft standard
Mounting Brackets
20mm
[0.79"]
Thrust Collar
(Mounted inside frame)
3mm
[0.12"]
20mm
[0.79"]
Ø63.5mm
[2.50"]
20mm
[0.79"]
34mm
[1.34"]
Dimensions
60mm
[2.36"]
17.3mm
[0.68"]
300mm
[11.81"]
8mm
[0.32"]
Shaft Orientation
8mm
[0.32"]
Tube Length in mm (TL)
Between Frame in mm (BF)
BF=TL+20mm
Point-up
(Shown)
Flat-up
POE1
POD1
Standard
(Threaded Hex Shaft)
20mm
[0.79"]
20mm
[0.79"]
Thrust Collar
(Mounted inside frame)
12mm
[0.46"]
20mm
[0.79"]
34.6mm
[1.36"]
Ø63.5mm
[2.50"]
SPROCKETS
17.3mm
[0.68"]
300mm
[11.81"]
8mm
[0.32"]
30mm
[1.18"]
8mm
[0.32"]
M20 x 1.5
*Note: Nuts are to be tightened to 110.6 lb-ft ± 10%
Tube Length in mm (TL)
Between Frame in mm (BF)
BF=TL+20mm
OS
(Other Specifications - Sprockets)
(standard sprockets 40A21, 50A17, & 60A15)
Operation
Protection
Environment
-Cycle: 1s ON; 1s OFF
-Thermal overload 221ºF
-Ambient Temperature
-Continuous or Intermittent duty
(105ºC) in the motor
32~104º F (0~40ºC)
-Do Not Exceed 150%
when used with an
- < 90% Relative Humidity
of No-Load Speed
Itoh Denki controller
(No condensation)
-No Corrosive Gases
-Vibration < 0.5G
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
28
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
PM635FS Performance Data
129mm
[5.08"]
CB-016S7 20 speed settings
90 1
52mm
[2.05"]
2.0
2.7
3.2
3.5
2.0
2.7
3.2
3.5
ACC
DEC
SW5
LED1
LED2
LED3
4.5mm
[0.18"]
SW1
23mm
[0.91"]
Rated
[0.20"]
0.4
0.5
0.7
0.9
0.4
0.5
0.7
0.9
5mm (x2)
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
78
142.9
135.7
114.3
100.0
43.0
40.9
34.4
30.1
At highest speed
Starting No-Load
[0.18"]
114.3
108.6
91.5
80.0
34.4
32.7
27.5
24.1
120mm
[4.72"]
Current (A)
4.5mm (x2)
Torque
(lb·in)
Starting
CB-016S7
6
10
15
20
25
40
60
75
Low
9.2
9.2
9.2
9.2
34.8
34.8
34.8
34.8
Tangential
Force (lb)
Starting
3mm
[0.12"]
2
High
34.1
47.7
63.0
74.0
128.6
180.0
237.9
279.2
SW1-5 off
SW5 0
23
3
No-load (FPM)
SW1-5 on
SW5 9
45 6
Gear Speed
Stage Code
Current (A)
At highest speed
Rated
1.9
2.5
3.0
3.2
1.9
2.5
3.0
3.2
Ø5mm
[0.18"]
SW1
SPEED
SET
LED 3
LED 2
LED 1
SW2
SW3
0V
IN
24V
0V
24V
50mm
[1.96"]
0.4
0.5
0.7
0.9
0.4
0.5
0.7
0.9
40mm
[1.57"]
No-Load
CN2
3mm
[0.12"]
Starting
High
Low
6
34.1
18.4
114.3 142.9
4.0
10
47.7
18.4
108.6 135.7
4.0
3
15
63.0
18.4
91.5
114.3
4.0
20
74.0
18.4
80.0
100.0
4.0
25
128.6
69.9
34.4
43.0
4.0
40
180.0
69.9
32.7
40.9
4.0
2
60
237.9
69.9
27.5
34.4
4.0
75
279.2
69.9
24.1
30.1
4.0
Performance data with other cards available upon request.
ERR
OUT A
V-IN
DIR/ESTOP
INPUT
Torque
(lb·in)
Starting
PWR
SENSOR
ERR
Tangential
Force (lb)
Starting
1NPN/PNP OUT
2SEN/SYN
3GEAR SET 2
4GEAR SET 1
6ZP2/ZP1
6ZE/ZB
7DIRECTION
8STOP/RUN
SW3 0
1ERR BLOCK
2DIR BLOCK
3ESTOP BLOCK
4SPEED BLOCK L
5SPEED BLOCK R
6INT/EXT
7DIR/ESTOP
8AUTO/MANU
SW3 9
27mm
[1.05"]
Gear Speed
Stage Code
161mm
[6.34"]
HB-510N
HB-510N 10 speed settings
No-load (FPM)
169mm
[6.67"]
Minimum Tube Lengths and Options
Without spring loaded shaft
With spring loaded shaft
Standard
MIN
Gear Stages
2
3
387mm 410mm
(15.24") (16.14")
Between Frame - 20mm = Tube Length
SW Double Sprocket End Cap
352mm 375mm
MIN
Gear Stages
2
3
OS Sprockets Welded to Tube*
387mm 410mm
MIN
SW - Between Frame - 63mm = Tube Length
OS - Between Frame - 20mm = Tube Length
(13.86") (14.76")
(15.24") (16.14")
VG Poly V Belt Pulley End Cap
387mm 410mm
MIN
(15.24") (16.14")
VG - Between Frame - 66mm = Tube Length
*Contact an Itoh Denki representative
to review your specific application
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
29
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
PM635KE DC Motor Driven Roller
Diameter: 2.50" (63.5mm)
Voltage: 24V DC
-Brushless DC motor provides long life
-ABEC 1 Bearings
-DOM, carbon steel tube
Features
-Improved torque for heavy duty pallet handling
-Low profile requirement of pallet handling
-11/16" Threaded hex shaft standard
-1000mm (39.37") power cable standard
Mounting Brackets
Dimensions
20mm
[0.79"]
3mm
[0.12"]
Thrust Collar
(Mounted inside frame)
20mm
[0.79"]
Ø63.5mm
[2.50"]
34mm
[1.34"]
20mm
[0.79"]
60mm
[2.36"]
17.3mm
[0.68"]
8mm
[0.32"]
8mm
[0.32"]
Tube Length in mm (TL)
1000mm
[39.37"]
Shaft Orientation
Between Frame in mm (BF)
BF=TL+20mm
Point-up
(Shown)
Flat-up
POE1
POD1
Standard
(Threaded Hex Shaft)
20mm
[0.79"]
20mm
[0.79"]
Thrust Collar
(Mounted inside frame)
12mm
[0.46"]
20mm
[0.79"]
34.6mm
[1.36"]
Ø63.5mm
[2.50"]
SPROCKETS
17.3mm
[0.68"]
8mm
[0.32"]
8mm
[0.32"]
30mm
[1.18"]
1000mm
[39.37"]
M20 x 1.5
*Note: Nuts are to be tightened to 110.6 lb-ft ± 10%
Tube Length in mm (TL)
Between Frame in mm (BF)
BF=TL+20mm
OS
(Other Specifications - Sprockets)
Operation
Protection
Environment
-Cycle: 1s ON; 1s OFF
-Thermal overload 221ºF
-Ambient Temperature
-Continuous or Intermittent duty
(105ºC) in the motor
32~104º F (0~40ºC)
-Do Not Exceed 150%
when used with an
- < 90% Relative Humidity
of No-Load Speed
Itoh Denki controller
(No condensation)
-No Corrosive Gases
-Vibration < 0.5G
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
30
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
High
52.5
199.5
757.9
16
60
230
SW2 0
Low
6.6
24.9
94.8
228.6
63.3
17.5
285.9
78.8
22.1
Current (A)
At highest speed
Starting No-Load
10.0
10.0
10.0
0.7
0.8
0.9
Rated
2.8
2.8
2.8
SW2
LED2
LED1
[0.18"]
64mm
[2.51"]
Torque
(lb·in)
Starting
SW1
4.5mm (x2)
Tangential
Force (lb)
Starting
VR2
VR1
151.5mm
[5.96"]
27mm
[1.07"]
3
2
1
SW2 9
4mm
[0.16"]
3mm
[0.12"]
CBM-103FN 10 speed settings
No-load (FPM)
Gear Speed
Stage Code
CBM-103FN
Standard: Two (2) motor connectors for use with the CBM-103FN driver card
5mm
[0.20"]
PM635KE Performance Data
143.5mm
[5.65"]
IB - Optional 12 pin motor connector for use with the CB-030S or IB-N06F driver card
7.0
7.0
7.0
0.7
0.8
0.9
Rated
2.9
2.9
2.9
23
90 1
59mm
[2.32"]
Starting No-Load
[0.20"]
227.4
62.8
17.7
5mm (x2)
181.6
50.3
13.9
122mm
[4.80"]
78
Low
7.5
28.2
107.3
At highest speed
129mm
[5.08"]
12 mm
[0.47"]
High
59.4
225.1
855.3
16
60
230
SW4 0
Current (A)
[0.18"]
3
2
1
SW4 9
Torque
(lb·in)
Starting
4.5mm (x2)
Gear Speed
Stage Code
Tangential
Force (lb)
Starting
CB-030S
CB-030S 20 speed settings
No-load (FPM)
45 6
LED1
LED2
LED3
SW4
SW1
3.5mm
[0.138"]
23mm
[0.91"]
ACC
DEC
3mm
[0.12"]
1000 MM
[39.37"]
PM635KE with 12 pin motor connector.
Minimum Tube Lengths and Options
Without spring loaded shaft
With spring loaded shaft
Standard
MIN
Gear Stages
1
2
360mm
(14.17")
3
380mm 400mm
(14.96") (15.75")
Between Frame - 20mm = Tube Length
SW Double Sprocket End Cap
325mm
345mm 365mm
MIN
Gear Stages
1
2
OS Sprockets Welded to Tube*
360mm 380mm
MIN
SW - Between Frame - 63mm = Tube Length
OS - Between Frame - 20mm = Tube Length
(12.80")
3
400mm
(14.17") (14.96") (15.75")
(13.58") (14.37")
VG Poly V Belt Pulley End Cap
360mm
MIN
380mm 400mm
(14.17") (14.96") (15.75")
VG - Between Frame - 66mm = Tube Length
*Contact an Itoh Denki representative
to review your specific application
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
31
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
CB-016S7 Driver Card
Applicable Models: PM486FS, PM486FE, PM486FP, PM570FE, PM605FE, PM635FS
129mm
[5.08"]
Wiring
78
52mm
[2.05"]
NPN
23
90 1
[0.20"]
5mm (x2)
[0.18"]
4.5mm (x2)
120mm
[4.72"]
45 6
ACC
DEC
LED1
LED2
LED3
SW5
SW1
4.5mm
[0.18"]
3mm
[0.12"]
23mm
[0.91"]
PNP
Features:
- Built in thermal protection for both driver card and Power Moller
- Three LED's to identify type of error and number of occurrences
- Dynamic brake control
- Stable speed function to ensure articles of different weights travel at the same rate
- Variable speed control by one DIP switch combined with one rotary switch
or by external voltage input for up to 20 speeds
- Direction control by onboard DIP switch or external signal input
- Adjustable acceleration and deceleration time (0 to 2.5s)
- Switch for manual or automatic recovery of thermal overload device
- Forcibly stops the motor if motor lock or thermal overload error lasts
for 4 seconds or more
- Snap on cover for easy NPN/PNP switching without removing the card off the frame
- Also available for rollers with built-in brakes, CB-016BS7
- Includes mounting hardware and wiring connectors
- Two (2) M4 x 15 phillips pan head mounting screws and nuts
To view more information please visit www.itohdenki.com
- Low temp option available
Connectors for power and control are: Power: WAGO #734-102 (Included)
Control: WAGO #733-105 (Included)
Operation
Protection
Environment
-Cycle: 1s ON; 1s OFF
-Thermal overload 185° F
-Ambient Temperature
-Continuous or Intermittent duty
-Do Not Exceed 150%
(85° C) on PCB
-Thermal overload 221ºF
- < 90% Relative Humidity
of No-Load Speed
(105ºC) in the motor
(No condensation)
-5 A fuse to power supply
-No Corrosive Gases
-Diode for protection from
-Vibration < 0.5G
32~104º F (0~40ºC)
incorrect wiring
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
32
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
CB-030S Driver Card
Applicable Models: PM486FH, PM635KE*
129mm
[5.08"]
59mm
[2.32"]
5mm (x2)
78
23
90 1
[0.20"]
12 mm
[0.47"]
122mm
[4.80"]
[0.18"]
4.5mm (x2)
Wiring
45 6
LED1
LED2
LED3
SW4
3.5mm
[0.138"]
SW1
3mm
[0.12"]
23mm
[0.91"]
ACC
DEC
Features:
- Designed for use with the high torque PM486FH (up to 7A) and PM635KE*
- Built in thermal protection for both driver card and Power Moller
- Three LED's to identify type of error and number of occurrences
- Dynamic brake control
- Stable speed function to ensure articles of different weights travel at the same rate
- Variable speed control by one DIP switch combined with one rotary switch
or by external voltage input for up to 20 speeds
- Direction control by onboard DIP switch or external signal input
- Adjustable acceleration and deceleration time (0 to 2.5s)
- Switch for manual or automatic recovery of thermal overload device
- Forcibly stops the motor if motor lock or thermal overload error lasts
for 4 seconds or more
- Includes mounting hardware and wiring connectors
- Two (2) M4 x 15 phillips pan head mounting screws and nuts
To view more information please visit www.itohdenki.com
Connectors for power and control are: Power: WAGO #734-102 (Included)
Control: WAGO #733-105 (Included)
*PM635KE requires the IB (12 pin connector) option for use with the CB-030S
Operation
Protection
Environment
-Cycle: 1s ON; 1s OFF
-Thermal overload 185° F
-Ambient Temperature
-Continuous or Intermittent duty
-Do Not Exceed 150%
(85° C) on PCB
-Thermal overload 221ºF
- < 90% Relative Humidity
of No-Load Speed
(105ºC) in the motor
(No condensation)
-10A fuse to power supply
-No Corrosive Gases
-Diode for protection from
-Vibration < 0.5G
32~104º F (0~40ºC)
incorrect wiring
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
33
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
CBM-103FN(P) Driver Card
VR2
SW1
SW2
LED2
Wiring
LED1
VR1
[0.18"]
64mm
[2.51"]
4mm
[0.16"]
4.5mm (x2)
5mm
[0.20"]
Applicable Model: PM635KE
27mm
[1.07"]
3mm
[0.12"]
151.5mm
[5.96"]
143.5mm
[5.65"]
Features:
- Designed for use with the high torque PM635KE (up to 10A)
- Built in thermal protection for both driver card and Power Moller
- Two LED's to identify type of error and number of occurrences
- Dynamic brake control
- Stable speed function to ensure articles of different weights travel at the same rate
- Variable speed control with rotary switch for 10 fixed speed settings
or by external voltage input for up to 16 speeds
- Direction control by onboard DIP switch or external signal input
- Adjustable acceleration and deceleration time (0 to 2.5s)
- Switch for manual or automatic recovery of thermal overload device
- Forcibly stops the motor if motor lock or thermal overload error lasts
for 4 seconds or more
- Induced voltage protection
- Please specify NPN input (CBM-103FN) or PNP input (CBM-103FP)
- Output is selectable through a dip switch
- Includes mounting hardware and wiring connectors
- Two (2) M4 x 15 phillips pan head mounting screws and nuts
To view more information please visit www.itohdenki.com
Connectors for power and control are: Power: WAGO #231-102/026-000 (Included)
Control: WAGO #733-105 (Included)
Environment
Operation
Protection
-Cycle: 1s ON; 1s OFF
-Thermal overload 203° F
-Continuous or Intermittent duty
-Ambient Temperature
32~104º F (0~40ºC)
-Do Not Exceed 150%
(95° C) on PCB
-Thermal overload 221ºF
- < 90% Relative Humidity
of No-Load Speed
(105ºC) in the motor
-No Corrosive Gases
-18 A fuse to power supply
-Vibration < 0.5G
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
34
(No condensation)
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
CBM-105FN(P) Driver Card
Applicable Models: PM486FS, PM486FE, PM486FP, PM570FE, PM605FE, PM635FS
129mm
[5.08"]
Wiring
90 1
78
ACC
2
VR2
3
4
DEC
LED1
LED2
52mm
[2.05"]
SW2
4.5mm
[0.18"]
SW1
PNP
3mm
[0.12"]
23mm
[0.91"]
ACC
DEC
45 6
1
NPN
23
VR1
[0.20"]
CBM-105
5mm (x2)
[0.18"]
4.5mm (x2)
120mm
[4.72"]
Features:
- Provides thermal protection for both Power Moller and driver card
- Two LED's to identify type of error
- Error output signal for self diagnosis
- Dynamic brake and servo brake control
- Variable speed by rotary switch or external voltage input
- Direction control by DIP switch or external signal input
- Adjustable acceleration and deceleration time (0-2.5s)
- Switch for automatic or manual recovery of back EMF error and thermal overload device
- Forcibly stops the motor if there is a motor lock, back EMF, or thermal overload occurs
- Please specify NPN input (CBM-105FN) or PNP input (CBM-105FP)
- Output is selectable through a dip switch
- Includes mounting hardware and wiring connector
- Two (2) M4 x 15 phillips pan head mounting screws and nuts
To view more information please visit www.itohdenki.com
Connectors for power and control are: Power: WAGO #734-102 (Included)
Control: WAGO #733-105 (Included)
Operation
Protection
Environment
-Cycle: 1s ON; 1s OFF
-Thermal overload 158° F
-Ambient Temperature
-Continuous or Intermittent duty
-Do Not Exceed 150%
(70° C) on PCB
-Thermal overload 221ºF
- < 90% Relative Humidity
of No-Load Speed
(105ºC) in the motor
(No condensation)
-5 A fuse to power supply
-No Corrosive Gases
-Diode for protection from
-Vibration < 0.5G
32~104º F (0~40ºC)
incorrect wiring
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
35
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
CBM-107FN(P) Driver Card
Applicable Models: PM486LD, PM486LE
4.5 mm (x2)
[0.18"]
106 mm
[4.17"]
Wiring
CBM-107FP
LED1
LED2
A/M
I/E
DIR
E/N
49 mm
[1.93"]
0V
24V
PWR
ERR
38 mm
[1.48"]
ERR
V-IN
DIR
RUN
NPN
SPEED
SW1
SW2
114 mm
[4.49"]
20 mm
[0.79"]
PNP
Features:
- Provides thermal protection for both Power Moller and driver card
- Two LED's to identify type of error
- Error output signal for self diagnosis
- Dynamic brake control
- Variable speed by rotary switch or external voltage input
- Direction control by DIP switch or external signal input
- Switch for automatic or manual recovery of back EMF error and thermal overload device
- Forcibly stops the motor if there is a motor lock, back EMF, or thermal overload occurs
- Please specify NPN input (CBM-107FN) or PNP input (CBM-107FP)
- Includes mounting hardware and wiring connector
- Two (2) M4 x 15 phillips pan head mounting screws and nuts
To view more information please visit www.itohdenki.com
Connectors for power and control are: Power: WAGO #734-102 (Included)
Control: WAGO #733-104 (Included)
Operation
Protection
Environment
-Cycle: 1s ON; 1s OFF
-Thermal overload 203° F
-Ambient Temperature
-Continuous or Intermittent duty
-Do Not Exceed 150%
(95° C) on PCB
-5 A fuse to power supply
- < 90% Relative Humidity
of No-Load Speed
-Diode for protection from
(No condensation)
incorrect wiring
-No Corrosive Gases
32~104º F (0~40ºC)
-Vibration < 0.5G
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
36
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
Snap-In-Drive Driver Card
Applicable Models: PM486XE, PM486XP
7mm
[0.29"]
13.2mm
[0.52"]
100mm
[3.94"]
19mm
[0.74"]
SW1
12m
[0.4m Dia
7"] .
25.4mm
[1.00"]
ON
1
LED2
2
3
CN3
Motor
4
LED3
Alternative mounting holes
114.3mm
[4.50"]
11.1mm
[0.44"]
VR1
LED1
Conveyor
Frame
48.6mm
[1.91"]
CN1
Power (24V DC)
5 Pin Connector
25mm
[1.00"]
130mm
[5.12"]
PM486XE/XP
roller with
exclusive shaft
connector
EDS Interface ZPA logic controller card
Features:
Roller mounted in frame
with the Snap-In-Drive's
integrated card and roller
mounting utilizing existing
hex holes in the frame.
- For use with cable-less Snap In Drive shaft connector option
- Mounting bracket integrated with zone control card mounting
- Can be mounted in existing frame holes on one inch or inch and a half centers
- Logic for general zero pressure accumulation (ZPA) control is built in
- Motor control cable is attached to the card and plugs into the roller's shaft connector
- Direct connection for photo eye to both power it and receive its output signal
- Variable speed control by onboard potentiometer, 10 speed settings
- Provides thermal protection for both motor and board
- Built-in diode for reverse polarity protection
- Available in master (shown) and slave card configurations
- Flexible Zone Recognition (patented) to handle long articles which block multiple zones
- Error output signal for self diagnosis
- LED indications for power, sensor and error status
- Direction control by DIP switch and external signal input
- Dynamic brake control
Ask about our complete Snap-In-Drive retrofit solution that includes everything you need!
To view more information and watch the installation video please visit www.itohdenki.com
Connector for control: WAGO #733-108 (Included)
Operation
Protection
Environment
-Cycle: 1s ON; 1s OFF
-Thermal overload 158° F
-Ambient Temperature
-Continuous or Intermittent duty
-Do Not Exceed 150%
(70° C) on PCB
-Thermal overload 221ºF
- < 90% Relative Humidity
of No-Load Speed
(105ºC) in the motor
(No condensation)
-5 A fuse to power supply
-No Corrosive Gases
-Diode for protection from
-Vibration < 0.5G
32~104º F (0~40ºC)
incorrect wiring
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
37
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
HB-510 ZPA Hybrid Card
Applicable Models: PM486FS, PM486FE, PM486FP, PM570FE, PM605FE, PM635FS
Wiring
Ø5mm
[0.18"]
SW1
SW2
LED 3
LED 2
LED 1
50mm
[1.96"]
ERR
OUT A
V-IN
DIR/ESTOP
INPUT
0V
24V
CN2
27mm
[1.05"]
3mm
[0.12"]
SW3
0V
IN
24V
40mm
[1.57"]
SPEED
SET
PWR
SENSOR
ERR
1NPN/PNP OUT
2SEN/SYN
3GEAR SET 2
4GEAR SET 1
6ZP2/ZP1
6ZE/ZB
7DIRECTION
8STOP/RUN
1ERR BLOCK
2DIR BLOCK
3ESTOP BLOCK
4SPEED BLOCK L
5SPEED BLOCK R
6INT/EXT
7DIR/ESTOP
8AUTO/MANU
161mm
[6.34"]
169mm
[6.67"]
Features:
- Built in thermal protection for both driver card and Power Moller
- Three LED's to identify type of error and number of occurrences
- Dynamic brake control
- Stable speed function to ensure articles of different weights travel at the same rate
- Variable speed control by rotary switch
or by external voltage input for up to 10 speeds
- Direction control by onboard DIP switch or external signal input
- Logic for general zero pressure accumulation (ZPA) control is built in
- Direct connection for photo eye to both power it and receive its output signal
- Easy connection between adjacent HB-510's with communication cable to simplify wiring
- Flexible Zone Recognition (patented) to handle long articles which simultaneously
block multiple sensors
- Also available for rollers with built-in brakes, HB-510B
- Includes mounting hardware and wiring connectors
- Four (4) M4 x 15 phillips pan head mounting screws and nuts
To view more information please visit www.itohdenki.com
- Low temp option available
Connectors for power and control are: Power: WAGO #734-102 (Included)
Sensor: WAGO # 733-103 (Included)
Optional External Control: WAGO #733-105 (Not Included)
Operation
Protection
Environment
-Cycle: 1s ON; 1s OFF
-Thermal overload 185° F
-Ambient Temperature
-Continuous or Intermittent duty
-Do Not Exceed 150%
(85° C) on PCB
-Thermal overload 221ºF
- < 90% Relative Humidity
of No-Load Speed
(105ºC) in the motor
(No condensation)
-5 A fuse to power supply
-No Corrosive Gases
-Diode for protection from
-Vibration < 0.5G
32~104º F (0~40ºC)
incorrect wiring
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
38
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
IB-E01 2- Zone Controller
IB-E01 2- Zone Controller
CN301
CN1
CN1
CN404
CN405
CN404
CN405
MS
NS1
NS2
STS
LAN1
LAN2
SenA
SenB
IN1
IN2
IN3
OUT1
OUT2
OUT3
OUT4
OUT5
MOTORMOTOR
A
A
CN301
Power
2 0
4 V
V
57.4MM
57.4MM
[2.26"]
[2.26"]
28.7MM
28.7MM
[1.13"]
[1.13"]
CN303
Power
RemoteIN
RemoteIN
SensorA
SensorA
I 0 S A
2 0C I IC I I I A
2 0 S 2
L V E 4
L V E 4
4 V
O N NO NN N N
M NV
V M 3 2M 13 2 M
1
NV
CN101
CN303
MOTORMOTOR
B
B
210MM
[8.27"]
210MM
[8.27"]
MS
NS1
NS2
STS LAN1 LAN1
LAN1
LAN2
SenA
Ethernet
Ethernet
SenB
100BASE-T
IN1 100BASE-T
IN2 10BASE-T10BASE-T
IN3
OUT1
OUT2 LAN2 LAN2
OUT3
OUT4
OUT5
CN101
220MM
[8.66"]
220MM
[8.66"]
SW403
SW402 SW401
SW403
SW402 SW401
RemoteOUT
RemoteOUT
SensorB
SensorB
O O OO OO OO CO O C
2 S 0 A
2 S 0 A
U U UU UU UU OU U O
4 E V L4 E V L
T T TT TT TT MT T M
VN M
1 2 31 42 53 4 5 V N M
Applicable Models: PM486FS, PM486FE, PM486FP, PM570FE, PM605FE, PM635FS
Applicable Models: PM486FS, PM486FE, PM486FP, PM570FE, PM605FE, PM635FS
CN201
5MM
[0.20"] CN201
5MM
[0.20"]
CN304
CN304
2-Ø4.5 MM
[Ø0.18"]
2-Ø4.5 MM
[Ø0.18"]
CN302
CN302
30.7MM
[1.21"]
30.7MM
[1.21"]
Features:
-Features:
Controls up to two (2) Power Mollers both with and without brake models*
- Direct
connection
(2) photo-sensors
thatand
power
and brake
receive
the output signal
Controls
up to twofor
(2)two
Power
Mollers both with
without
models*
- Custom
programmable
ladder
logic for fine tuning
your and
specific
application
Direct connection
for two
(2) photo-sensors
that power
receive
the output signal
- Automatically
adjusts toladder
NPN or
PNP
for both
photo-sensors
and discrete inputs
Custom programmable
logic
forinputs
fine tuning
your
specific application
- I/O
device equipping
(3)or
discrete
inputsfor
and
fivephoto-sensors
(5) discrete outputs
Automatically
adjuststhree
to NPN
PNP inputs
both
and discrete inputs
- Establish
connection
to (3)
Rockwell's
and
control
platforms
through E/IP
I/O deviceI/O
equipping
three
discrete software
inputs and
five
(5) discrete
outputs
Establish
connection
Rockwell's
- Local
andI/O
remote
control to
are
available software and control platforms through E/IP
- Two
port
Ethernet
switch
upon Rockwell Automation's switch technology
Local(2)
and
remote
control
are built
available
- LED
status
error indicators
Two (2)
port/ Ethernet
switch built upon Rockwell Automation's switch technology
- Motor
pulse/ counting
through local logic
LED status
error indicators
- EtherNet/IP
TESTED™
Motor pulse CONFORMANCE
counting through local
logic
EtherNet/IP
TESTED™
- UL
and cUL CONFORMANCE
recognized (pending)
- AOP
(Add-On
Profile) to(pending)
be available from Rockwell Automation
UL and
cUL recognized
AOP side
(Add-On
Profile) are
to be
available
from
Rockwell
Automation
- Wire
connectors
available
from
various
sources.
They are not provided as standard.
POWER [CN1]
WAGO
231-302
/ 026-000
- WireMOTOR
side connectors
are available from various
sources.
They
are not provided as standard.
COMMUNICATION
[CN404 & CN405]
MOTOR POWER [CN1]
RJ45
WAGO 231-302 / 026-000
EXTERNAL
INPUT&[CN301]
SENSOR [CN303
CN304]
WAGO 734-204
733-104
COMMUNICATION
SENSOR
[CN303 & [CN404
CN304] & CN405]
WAGO
RJ45 733-104
SIGNAL
OUTPUT
WAGO 734-206
EXTERNAL
INPUT[CN302]
[CN301]
734-204
*Non brake
model
rollers must
use 10-pin motor connectorWAGO 734-206
SIGNAL
OUTPUT
[CN302]
*Non brake model rollers must use 10-pin motor connector
To view more information please visit www.itohdenki.com
To view more information please visit www.itohdenki.com
Protection
-Thermal overload 185° F
Protection
(90° C) onoverload
PCB
-Thermal
185° F
-Thermal
221ºF
(90° C) onoverload
PCB
(105ºC)
the motor
-Thermalinoverload
221ºF
- 6.3A fuse
for motor
each motor
(105ºC)
in the
-Diode
for protection
from
- 6.3A fuse
for each motor
incorrect wiring
-Diode for protection from
incorrect wiring
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
Environment
-Ambient Temperature
Environment
-4~104º FTemperature
(-20~40ºC)
-Ambient
--4~104º
< 90% Relative
Humidity
F (-20~40ºC)
condensation)
-(No
< 90%
Relative Humidity
-No
Gases
(NoCorrosive
condensation)
-Vibration
< 1.0G
-No
Corrosive
Gases
-Vibration < 1.0G
39
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
IB-N05B CANopen 4 Zone Controller
Applicable Models: PM486FS, PM486FE, PM486FP, PM570FE, PM605FE, PM635FS
200MM
[7.88"]
CN301
J502
J501
22MM
[0.87"]
CN101
J505
72MM
[2.83"]
94MM
[3.70"]
J506
J508
22MM
[0.87"]
J509
SW504 SW503 SW502
SW505
CN401
J503
210MM
[8.27"]
J504
J507
Ø4.5MM
[Ø0.18"]
27MM
[1.06"]
Features:
- Controls up to four (4) Power Mollers both with and without brake models*
- Eight (8) available sensor connections that power and receive the output signal from sensor
- Custom programmable logic for fine tuning your specific application
- Communication using CAN open
- Sensor automatically adjusts for NPN or PNP
- Built in terminating resistor thru switch SW506
- For use with Itoh Denki Ethernet/IP-CANopen Gateway
- Dip switches for selectable motor outputs or discreet outputs
- Adjustable CAN baud rates from 50 kpbs to 1 Mbps
- Selectable node ID for up to 64 IB-N05B's on one Gateway
- LED status / error indicators
- Motor Pulse monitoring
- UL and cUL registered
- Wire side connectors are available from various sources and in different configurations.
They are not provided as standard.
CN1
MOTOR POWER
WAGO 231-302/026-000
CN501 & CN502
J501, J502, J503, J504,
J505, J506, J508, J509
CAN POWER AND COMMUNICATION
WAGO 734-205
SENSOR
WAGO 733-104
J507
REMOTE I/O
PHOENIX FK-MC 0.5/4-ST-2.5
*Non brake model rollers must use 10-pin motor connector
To view more information please visit www.itohdenki.com
Protection
Environment
-Thermal overload 185° F
-Ambient Temperature
(90° C) on PCB
-Thermal overload 221ºF
- < 90% Relative Humidity
-4~104º F (-20~40ºC)
(105ºC) in the motor
(No condensation)
- 6.3A fuse for each motor
-No Corrosive Gases
-1 A fuse for CAN power
-Diode for protection from
-Vibration < 1.0G
incorrect wiring
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
40
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
IB-N06F CANopen 4 Zone Controller
Applicable Models: PM486FH, PM635KE*
200MM
[7.88"]
CN101
CN301
J501
22MM
[0.87"]
J502
J505
72MM
[2.83"]
94MM
[3.70"]
J506
J508
22MM
[0.87"]
J509
SW504 SW503 SW502
SW505
CN401
J503
J504
210MM
[8.27"]
J507
Ø4.5MM
[Ø0.18"]
27MM
[1.06"]
Features:
- Controls up to four (4) Power Mollers
- Eight (8) available sensor connections that power and receive the output signal from sensor
- Custom programmable logic for fine tuning your specific application
- Communication using CAN open
- Sensor automatically adjusts for NPN or PNP
- Built in terminating resistor thru switch SW506
- Two (2) connectors for 24VDC power (CN1 & CN4)
- For use with Itoh Denki Ethernet/IP-CANopen Gateway
- Dip switches for selectable motor outputs or discreet outputs
- Adjustable CAN baud rates from 50 kpbs to 1 Mbps
- Selectable node ID for up to 64 IB-N06F's on one Gateway
- LED status / error indicators
- Motor Pulse monitoring
- UL and cUL registered
- Wire side connectors are available from various sources and in different configurations.
They are not provided as standard.
CN1 & CN4
MOTOR POWER
WAGO 231-302/026-000
CN501 & CN502
J501, J502, J503, J504,
J505, J506, J508, J509
CAN POWER AND COMMUNICATION
WAGO 734-205
SENSOR
WAGO 733-104
J507
REMOTE I/O
PHOENIX FK-MC 0.5/4-ST-2.5
*PM635KE requires the IB (12 pin connector) option for use with the IB-N06F
To view more information please visit www.itohdenki.com
Protection
Environment
-Thermal overload 185° F
-Ambient Temperature
(90° C) on PCB
-Thermal overload 221ºF
- < 90% Relative Humidity
-4~104º F (-20~40ºC)
(105ºC) in the motor
(No condensation)
-10A fuse for each motor
-No Corrosive Gases
-1 A fuse for CAN power
-Diode for protection from
-Vibration < 1.0G
incorrect wiring
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
41
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
GWM-CAN/EIP-01 CANopen to Ethernet/IP Gateway
Applicable Models: IB-N05B, IB-N06F
CN1
4 - Ø4.5mm
94mm
[3.70"]
50mm
[1.97"]
CN4
22mm
[0.87"]
CN2
193mm
[7.60"]
24mm
[0.94"]
200mm
[7.87"]
Features:
- CANopen to EtherNet/IP communication to interface with IB-N05B & IB-N06F cards and PC
- Use with I-CAN Designer, Logic programmer, firmware update utility & PDO monitor
- Up to 64 IB-N05B / IB-N06F can be connected to one Gateway
- LED status / error indications
- Wire side connectors are available from various sources and in different configurations.
They are not provided as standard.
CN1,2 PHOENIX MC1.5/2-ST-3.81
CN4
PHOENIX MC1.5/3-ST-3.81
To view more information please visit www.itohdenki.com
Environment
-Ambient Temperature
-4~104º F (-20~40ºC)
- < 90% Relative Humidity
(No condensation)
-No Corrosive Gases
-Vibration < 1.0G
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
42
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
PM380AS
AC Motor Driven Roller
Diameter: 1.5" (38mm)
Voltage: 115 V Single Phase
230 V Three Phase
Features
-Thermally stable motor that can be operated
24/7 without fear of overheating
-ABEC 1 Bearings
-DOM, zinc plated, carbon steel tube
-Designed for slim compact lines
Dimensions
5mm
[0.20"]
50mm
[1.97"]
5mm
[0.20"]
Tube Length in mm (TL)
44mm
[1.73"]
30mm
[1.18"]
12mm
[0.47"]
12mm
[0.47"]
Ø38mm
[1.50"]
8mm
[0.32"]
10mm
[0.39"]
26mm
[1.01"]
7mm
[0.28"]
12mm
[0.47"]
35mm
[1.38"]
12mm
[0.47"]
2.6mm
[0.10"]
Gromet
40mm
[1.57"]
69mm
[2.72"]
Between Frame in mm (BF)
BF=TL+15mm
Mounting Hardware: E-920 Terminal Block
Performance Data
3Φ 230V 60Hz
Speed
Code
No-Load
Speed
(ft/min)
Tangential
Force
Starting (lb)
5
8
10
15
20
30
16.4
24.9
37.7
52.5
80.4
125.0
13.4
8.9
5.8
4.9
3.2
2.0
Speed
Code
No-Load
Speed
(ft/min)
Tangential
Force
Starting (lb)
Torque
Starting
(lb-in)
5
8
10
15
20
30
16.4
24.9
37.7
52.5
80.4
125.0
6.7
4.5
3.0
2.6
1.8
1.1
5.0
3.4
2.2
1.9
1.3
0.8
Torque
Starting
(lb-in)
Current (A)
No-Load
10.0
6.6
4.3
0.05
3.6
2.4
1.5
1Φ 115V 60Hz
Rated
Starting
0.05
0.07
Current (A)
No-Load
Rated
Starting
0.11
0.11
0.13
Environment
-Ambient Temperature
14~104º F (-10~40ºC)
- < 90% Relative Humidity
(No Condensation)
-No Corrosive Gases
-Vibration < 0.5G
Operation
-Cycle: 3s ON; 2s OFF
-Continuous or Intermittent duty
-Do Not Exceed 150%
of No-Load Speed
Minimum Tube Lengths and Options
Without spring loaded shaft
With spring loaded shaft
Standard
200 mm (7.87")
220 mm (8.66")
BR Brake
MIN
250 mm (9.84")
DR Drip proof IP-55
MIN
200 mm (7.87")
WA Waterproof IP-65
MIN
250 mm (9.84")
Lagging
Wide range of rubber laggings available
VP V-Belt pulley end cap
220 mm (8.66")
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
43
270 mm (10.63")
220 mm (8.66")
250 mm (9.84")
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
PM427AS
AC Motor Driven Roller
Diameter: 1.68" (42.7mm)
Voltage: 115 V Single Phase
230 V Three Phase
Features
-Thermally stable motor that can be operated
24/7 without fear of overheating
-ABEC 1 Bearings
-DOM, zinc plated, carbon steel tube
-Designed for slim compact lines
Dimensions
44mm
[1.73"]
5mm
[0.20"]
Tube Length in mm (TL)
12mm
[0.47"]
Ø42.7mm
[1.68"]
12mm
[0.47"]
10mm
[0.39"]
5mm
[0.20"]
26mm
[1.01"]
7mm
[0.28"]
12mm
[0.47"]
8mm
[0.32"]
50mm
[1.97"]
35mm
[1.38"]
12mm
[0.47"]
30mm
[1.18"]
2.6mm
[0.10"]
Gromet
40mm
[1.57"]
Between Frame in mm (BF)
69mm
[2.72"]
BF=TL+15mm
Mounting Hardware: E-920 Terminal Block
Performance Data
3Φ 230V 60Hz
Torque
Starting
(lb-in)
Speed
Code
No-Load
Speed
(ft/min)
Tangential
Force
Starting (lb)
5
8
10
15
20
30
18.4
27.9
42.3
59.1
90.2
140.4
11.9
7.9
5.2
4.3
2.8
1.8
Speed
Code
No-Load
Speed
(ft/min)
Tangential
Force
Starting (lb)
Torque
Starting
(lb-in)
5
8
10
15
20
30
18.4
27.9
42.3
59.1
90.2
140.4
6.0
4.0
2.6
2.3
1.6
0.9
5.0
3.4
2.2
1.9
1.3
0.8
Current (A)
No-Load
10.0
6.6
4.3
0.05
3.6
2.4
1.5
1Φ 115V 60Hz
Rated
Starting
0.05
0.07
Current (A)
No-Load
Rated
Starting
0.11
0.11
0.13
Environment
-Ambient Temperature
14~104º F (-10~40ºC)
- < 90% Relative Humidity
(No Condensation)
-No Corrosive Gases
-Vibration < 0.5G
Operation
-Cycle: 3s ON; 2s OFF
-Continuous or Intermittent duty
-Do Not Exceed 150%
of No-Load Speed
Minimum Tube Lengths and Options
Without spring loaded shaft
With spring loaded shaft
Standard
200 mm (7.87")
220 mm (8.66")
BR Brake
MIN
250 mm (9.84")
DR Drip proof IP-55
MIN
200 mm (7.87")
WA Waterproof IP-65
MIN
250 mm (9.84")
Lagging
Wide range of rubber laggings available
VP V-Belt pulley end cap
220 mm (8.66")
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
44
270 mm (10.63")
220 mm (8.66")
250 mm (9.84")
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
PM486BS AC Motor Driven Roller
Diameter: 1.91" (48.6mm)
Voltage: 115 V Single Phase
230 V Three Phase
Features
-Thermally stable motor that can be operated
24/7 without fear of overheating
-ABEC 1 Bearings
-DOM, zinc plated, carbon steel tube
-Designed for medium to heavy load conveyors
Dimensions
[0.43"]
5mm
[0.20"]
50mm
[1.97"]
5mm
[0.20"]
Tube Length in mm (TL)
5mm
[0.20"]
50mm
[1.97"]
5mm
[0.20"]
Between FrameTube
in mmLength
(BF) in mm (TL)
BF=TL+15mm
Earth
Terminal
Between Frame in mm (BF)
BF=TL+15mm
Performance Data
No-Load
Speed
(ft/min)
Tangential
Force
Starting (lb)
5
10
15
20
30
40
50
16.4
33.8
53.5
67.9
107.0
130.2
170.2
17.2
9.9
6.3
6.0
3.8
3.1
2.4
Speed
Code
No-Load
Speed
(ft/min)
Tangential
Force
Starting (lb)
5
10
15
20
30
40
50
Torque
Starting
(lb-in)
Current (A)
No-Load
16.5
0.06
9.5
0.06
6.0
0.06
5.8
0.04
3.6
0.04
3.0
0.04
2.3
0.04
1Φ 115V 60Hz
Torque
Starting
(lb-in)
200 mm (7.87")
No-Load
34mm
[1.34"]
46mm
[1.81"]
24mm
[0.94"]
M5
2 - 5.3 mm dia. holes
for mounting to frame
3mm
[0.12"]
Starting
0.06
0.06
0.06
0.04
0.04
0.04
0.04
0.08
0.08
0.08
0.09
0.09
0.09
0.09
Rated
Starting
0.15
0.15
0.15
0.17
0.17
0.17
0.17
0.17
0.17
0.17
0.30
0.30
0.30
0.30
Environment
-Ambient Temperature
14~104º F (-10~40ºC)
- < 90% Relative Humidity
(No Condensation)
-No Corrosive Gases
-Vibration < 0.5G
Operation
-Cycle: 3s ON; 2s OFF
-Continuous or Intermittent duty
-Do Not Exceed 150%
of No-Load Speed
250 mm (9.84")
BR Brake
Wide range of rubber laggings available
P2 Double grooved tube (50/32)
MIN
250 mm (9.84")
DR Drip proof IP-55
MIN
200 mm (7.87")
WA Waterproof IP-65
260 mm (10.24")
315 mm (12.40")
VP V-Belt pulley end cap
250 mm (9.84")
MIN
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
Rated
Current (A)
16.4
7.6
7.3
0.13
33.8
4.5
4.3
0.13
53.5
2.9
2.7
0.13
67.9
3.1
2.9
0.11
107.0
1.9
1.9
0.11
130.2
1.6
1.5
0.11
170.2
1.2
1.2
0.11
Minimum Tube Lengths and Options
Without spring loaded shaft
With spring loaded shaft
Non Grooved Tube
Lagging
Tighten nuts to 4.4 lb-ft (6Nm)
Mounting Hardware: A-270-GS (Hex Flat up) Terminal Block
[A-280-GS (Hex Point Up) also available]
3Φ 230V 60Hz
Speed
Code
60mm
[2.36"]
10mm
11.1mm
[0.39"]
12mm
[0.47"]
Ø48.6mm
[1.91"]
12mm
12mm
[0.47"]
[0.47"]
Ø38mm
[1.50"]
8mm
[0.32"]
64.5mm
[2.54"]
17mm
[0.67"]
45mm
[1.77"]
12mm
[0.47"]
9mm
[0.35"]
15mm
[0.59"]
51mm
[2.01"]
12mm
[0.47"]
45
300 mm (11.81")
250 mm (9.84")
260 mm (10.24")
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
PM570AS AC Motor Driven Roller
Features
-Thermally stable motor that can be operated
24/7 without fear of overheating
-ABEC 1 Bearings
-DOM, zinc plated, carbon steel tube
-Designed for medium to heavy load conveyors
-12mm (0.47") Dia. D-Shafts
Dimensions
12mm
[0.47"]
10mm
[0.39"]
50mm
[1.97"]
5mm
[0.20"]
34mm
[1.34"]
46mm
[1.81"]
5mm
[0.20"]
Tube Length in mm (TL)
Between Frame in mm (BF)
24mm
[0.94"]
50mm
[1.98"]
45mm
[1.77"]
60mm
[2.36"]
Ø57.0mm
[2.24"]
9mm
[0.35"]
17mm
[0.67"]
51mm
[2.01"]
15mm
[0.59"]
M5
2 - 5.3 mm dia holes
for mounting to frame
64.5mm
[2.54"]
Diameter: 2.25" (57mm)
Voltage: 115 V Single Phase
230 V Three Phase
2.9mm
[0.11"]
BF=TL+15mm
Performance Data
1Φ 115V 60Hz
3Φ 230V 60Hz
Speed
Code
4
5
8
9
10
13
15
20
30
45
50
60
3Φ
230V
60Hz
No-Load
Speed
(ft/min)
Tangential
Force
Starting (lb)
Torque
Starting
(lb-in)
14.8
20.3
29.9
37.4
41.0
51.5
62.7
89.6
130.6
170.9
188.0
247.4
27.9
20.3
14.0
11.1
10.2
8.0
7.6
5.4
3.7
2.8
2.5
2.0
Current (A)
Rated
0.06
31.2
22.8
15.7
12.5
11.4
9.0
8.6
6.0
4.2
3.2
2.8
2.2
No-Load
0.06
Starting
0.13
Speed Code
4
5
8
9
10
13
15
20
30
45
50
60
1Φ
115V
60Hz
No-Load
Speed
(ft/min)
Tangential
Force
Starting (lb)
Torque
Starting
(lb-in)
14.8
20.3
29.9
37.4
41.0
51.5
62.7
89.6
130.6
170.9
188.0
247.4
11.4
8.4
5.8
4.6
4.2
3.8
3.3
2.4
1.7
1.3
1.1
0.9
Current (A)
Rated
0.19
12.8
9.4
6.5
5.1
4.7
4.2
3.7
2.7
1.9
1.4
1.2
1.0
No-Load
0.17
Minimum Tube Lengths and Options
Without spring loaded shaft
With spring loaded shaft
Non Grooved Tube
MIN
200 mm (7.87")
Lagging
Mounting Hardware: A-200 Terminal Block
Wide range of rubber laggings available
P2 Double grooved tube (65/30)
MIN
320 mm (12.60")
VP V-Belt pulley end cap
250 mm (9.84")
-< 90% Relative Humidity
(No Condensation)
-No Corrosive Gases
-Vibration < 0.5G
Operation
-Cycle: 3s ON; 2s OFF
-Continuous or
Intermittent duty
-Do Not Exceed 150%
of No-Load Speed
Starting
0.28
EC Free clutch
MIN
280 mm (11.02")
BR Brake
MIN
250 mm (9.84")
DR Drip proof IP-55
200 mm (7.87")
MIN
WA Waterproof IP-65
MIN
260 mm (10.24")
250 mm (9.84")
Environment
-Ambient Temperature
14~104º F (-10~40ºC)
330 mm (13.00")
300 mm (11.81")
260 mm (10.24")
*WT Spring loaded shaft option
290 mm (11.24")
*Waterproof option does not include spring loaded shaft, add WT to model
number for tube lengths 290 mm and over to receive spring loaded shaft
Check with your Itoh Denki representative for WA speeds available
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
46
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
PM570BP AC Motor Driven Roller
Diameter: 2.25" (57mm)
Voltage: 230 V Three Phase
Features
-Thermally stable motor that can be operated
24/7 without fear of overheating
-ABEC 1 Bearings
-DOM, zinc plated, carbon steel tube
-Designed for heavy load conveyors
-12mm (0.47") Dia. D-Shafts
Dimensions
50mm
[1.97"]
5mm
[0.20"]
34mm
[1.34"]
46mm
[1.81"]
5mm
[0.20"]
Tube Length in mm (TL)
Between Frame in mm (BF)
BF=TL+15mm
Performance Data
Speed
Code
Tangential
Force
Starting (lb)
Torque
Starting
(lb-in)
5
8
10
15
20
30
40
19.7
27.6
39.0
74.5
100.4
142.1
218.5
60.8
43.0
30.4
15.9
12.6
8.9
5.8
68.2
48.2
34.1
17.9
14.2
10.0
6.5
200 mm (7.87")
2.9mm
[0.11"]
Environment
Current (A)
No-Load
Rated
Starting
0.09
0.10
0.31
-Ambient Temperature
14~104º F (-10~40ºC)
- < 90% Relative Humidity
(No Condensation)
-No Corrosive Gases
-Vibration < 0.5G
Operation
-Cycle: 3s ON; 5s OFF
-Continuous or Intermittent duty
-Do Not Exceed 150%
of No-Load Speed
Minimum Tube Lengths and Options
Without spring loaded shaft
With spring loaded shaft
Non Grooved Tube
MIN
2 - 5.3 mm dia holes
for mounting to frame
Mounting Hardware: A-200 Terminal Block
3Φ 230V 60Hz
No-Load
Speed
(ft/min)
M5
64.5mm
[2.54"]
10mm
[0.39"]
24mm
[0.94"]
50mm
[1.98"]
45mm
[1.77"]
60mm
[2.36"]
12mm
[0.47"]
Ø57.0mm
[2.24"]
9mm
[0.35"]
17mm
[0.67"]
51mm
[2.01"]
15mm
[0.59"]
250 mm (9.84")
Lagging
BR Brake
MIN
250 mm (9.84")
DR Drip proof IP-55
MIN
240 mm (9.45")
WA Waterproof IP-65
MIN
240 mm (9.45")
Wide range of rubber laggings available
P2 Double grooved tube (65/30)
MIN
310 mm (12.20")
VP V-Belt pulley end cap
250 mm (9.84")
300 mm (11.81")
250 mm (9.84")
*WT Spring loaded shaft option
260 mm (10.24")
*Waterproof option does not include spring loaded shaft, add WT to model
number for tube lengths 260 mm and over to receive spring loaded shaft
Check with your Itoh Denki representative for WA speeds available
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
47
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
PM570AU AC Motor Driven Roller
Diameter: 2.25" (57mm)
Voltage: 230 V Three Phase
Features
-Thermally stable motor that can be operated
24/7 without fear of overheating
-ABEC 1 Bearings
-DOM, zinc plated, carbon steel tube
-Special high impedance motor
allows loads to be accumulated
limitlessly without overheating
-12mm (0.47") Dia. D-Shafts
Dimensions
M5
64.5mm
[2.54"]
10mm
[0.39"]
24mm
[0.94"]
50mm
[1.98"]
45mm
[1.77"]
60mm
[2.36"]
12mm
[0.47"]
Ø57.0mm
[2.24"]
9mm
[0.35"]
17mm
[0.67"]
51mm
[2.01"]
15mm
[0.59"]
50mm
[1.97"]
5mm
[0.20"]
34mm
[1.34"]
46mm
[1.81"]
5mm
[0.20"]
Tube Length in mm (TL)
Between Frame in mm (BF)
2 - 5.3 mm dia holes
for mounting to frame
2.9mm
[0.11"]
BF=TL+15mm
Performance Data
Mounting Hardware: A-200 Terminal Block
3Φ 230V 60Hz
Speed
Code
No-Load
Speed
(ft/min)
Tangential
Force
Starting (lb)
Torque
Starting
(lb-in)
4
5
8
9
10
13
15
20
30
13.5
18.4
26.9
33.8
36.7
46.6
56.4
80.7
117.4
9.9
7.3
5.0
3.9
3.6
3.3
2.9
2.0
1.4
11.2
8.1
5.6
4.4
4.1
3.7
3.3
2.3
1.6
Environment
Current (A)
No-Load
Rated
Starting
0.05
0.05
0.06
-Ambient Temperature
14~104º F (-10~40ºC)
- < 90% Relative Humidity
(No Condensation)
-No Corrosive Gases
-Vibration < 0.5G
Operation
-Limitless
-Continuous or Intermittent duty
-Do Not Exceed 150%
of No-Load Speed
Minimum Tube Lengths and Options
Without spring loaded shaft
With spring loaded shaft
Standard
MIN
200 mm (7.87")
250 mm (9.84")
EC Free clutch
MIN
280 mm (11.02)
DR Drip proof IP-55
MIN
200 mm (7.87")
WA Waterproof IP-65
MIN
260 mm (10.24")
Lagging
Wide range of rubber laggings available
VP V-Belt pulley end cap
250 mm (9.84")
330 mm (13.00")
260 mm (10.24")
Check with your Itoh Denki representative for WA speeds available
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
48
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
PM605AS AC Motor Driven Roller
Diameter: 2.38" (60.5mm)
Voltage: 115 V Single Phase
230 V Three Phase
Features
-Thermally stable motor that can be operated
24/7 without fear of overheating
-ABEC 1 Bearings
-DOM, zinc plated, carbon steel tube
-Designed for medium to heavy load conveyors
-12mm (0.47") Dia. D-Shafts
Dimensions
50mm
[1.97"]
5mm
[0.20"]
34mm
[1.34"]
46mm
[1.81"]
5mm
[0.20"]
Tube Length in mm (TL)
Between Frame in mm (BF)
BF=TL+15mm
3Φ 230V 60Hz
Speed
Code
4
5
8
9
10
13
15
20
30
45
50
60
3Φ
230V
60Hz
Performance Data
No-Load
Speed
(ft/min)
Tangential
Force
Starting (lb)
Torque
Starting
(lb-in)
15.7
21.7
31.5
39.7
43.3
54.8
66.6
95.1
138.5
181.4
199.5
262.5
26.2
19.2
13.2
10.5
9.6
7.6
7.2
5.1
3.5
2.7
2.4
1.9
Current (A)
Rated
0.06
31.2
22.8
15.7
12.5
11.4
9.0
8.6
6.0
4.2
3.2
2.8
2.2
No-Load
0.06
Starting
0.13
Speed Code
4
5
8
9
10
13
15
20
30
45
50
60
1Φ
115V
60Hz
Minimum Tube Lengths and Options
Without spring loaded shaft
With spring loaded shaft
Standard
MIN
200 mm (7.87")
Lagging
Wide range of rubber laggings available
PC Crowned tube
MIN
250 mm (9.84")
VP V-Belt pulley end cap
250 mm (9.84")
2 - 5.3 mm dia holes
for mounting to frame
2.9mm
[0.11"]
Mounting Hardware: A-200 Terminal Block
1Φ 115V 60Hz
No-Load
Speed
(ft/min)
Tangential
Force
Starting (lb)
Torque
Starting
(lb-in)
15.7
21.7
31.5
39.7
43.3
54.8
66.6
95.1
138.5
181.4
199.5
262.5
10.8
7.9
5.4
4.3
3.9
3.6
3.1
2.2
1.6
1.2
1.0
0.8
Current (A)
Rated
0.19
12.8
9.4
6.5
5.1
4.7
4.2
3.7
2.7
1.9
1.4
1.2
1.0
No-Load
0.17
Environment
-Ambient Temperature
14~104º F (-10~40ºC)
-< 90% Relative Humidity
(No Condensation)
-No Corrosive Gases
-Vibration < 0.5G
Operation
-Cycle: 3s ON; 2s OFF
-Continuous or
Intermittent duty
-Do Not Exceed 150%
of No-Load Speed
Starting
0.28
P2 Double grooved tube (65/30)
MIN
320 mm (12.60")
EC Free clutch
MIN
280 mm (11.02)
BR Brake
MIN
250 mm (9.84")
DR Drip proof IP-55
MIN
200 mm (7.87")
WA Waterproof IP-65
*WT
MIN
260 mm (10.24")
250 mm (9.84")
M5
64.5mm
[2.54"]
10mm
[0.39"]
24mm
[0.94"]
50mm
[1.98"]
45mm
[1.77"]
60mm
[2.36"]
12mm
[0.47"]
Ø60.5mm
[2.38"]
9mm
[0.35"]
17mm
[0.67"]
51mm
[2.01"]
15mm
[0.59"]
330 mm (13.00")
300 mm (11.81")
260 mm (10.24")
Spring loaded shaft option
290 mm (11.24")
*Waterproof option does not include spring loaded shaft, add WT to model
number for tube lengths 290 mm and over to receive spring loaded shaft
Check with your Itoh Denki representative for WA speeds available
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
49
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
PM605BP AC Motor Driven Roller
Diameter: 2.38" (60.5mm)
Voltage: 230 V Three Phase
Features
-Thermally stable motor that can be operated
24/7 without fear of overheating
-ABEC 1 Bearings
-DOM, zinc plated, carbon steel tube
-Designed for heavy load conveyors
-12mm (0.47") Dia. D-Shafts
Dimensions
50mm
[1.97"]
5mm
[0.20"]
34mm
[1.34"]
46mm
[1.81"]
5mm
[0.20"]
Tube Length in mm (TL)
Between Frame in mm (BF)
BF=TL+15mm
Performance Data
Speed
Code
Tangential
Force
Starting (lb)
Torque
Starting
(lb-in)
5
8
10
15
20
30
40
20.7
29.2
41.7
79.1
106.6
150.9
232.0
57.3
40.5
28.6
15.0
11.9
8.4
5.5
68.2
48.2
34.1
17.9
14.2
10.0
6.5
200 mm (7.87")
2.9mm
[0.11"]
Environment
Current (A)
No-Load
Rated
Starting
0.09
0.10
0.31
-Ambient Temperature
14~104º F (-10~40ºC)
- < 90% Relative Humidity
(No Condensation)
-No Corrosive Gases
-Vibration < 0.5G
Operation
-Cycle: 3s ON; 5s OFF
-Continuous or Intermittent duty
-Do Not Exceed 150%
of No-Load Speed
Minimum Tube Lengths and Options
Without spring loaded shaft
With spring loaded shaft
Standard
MIN
2 - 5.3 mm dia holes
for mounting to frame
Mounting Hardware: A-200 Terminal Block
3Φ 230V 60Hz
No-Load
Speed
(ft/min)
M5
64.5mm
[2.54"]
10mm
[0.39"]
24mm
[0.94"]
50mm
[1.98"]
45mm
[1.77"]
60mm
[2.36"]
12mm
[0.47"]
Ø60.5mm
[2.38"]
9mm
[0.35"]
17mm
[0.67"]
51mm
[2.01"]
15mm
[0.59"]
250 mm (9.84")
Lagging
Wide range of rubber laggings available
PC Crowned tube
MIN
250 mm (9.84")
VP V-Belt pulley end cap
250 mm (9.84")
BR Brake
MIN
250 mm (9.84")
DR Drip proof IP-55
MIN
240 mm (9.45")
WA Waterproof IP-65
MIN
240 mm (9.45")
P2 Double Groove Tube (65/30)
*Waterproof option does not include spring loaded shaft, add WT to model
MIN
310 mm (12.20")
300 mm (11.81")
250 mm (9.84")
*WT Spring loaded shaft option
260 mm (10.24")
number for tube lengths 260 mm and over to receive spring loaded shaft
Check with your Itoh Denki representative for WA speeds available
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
50
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
PM605AU
AC Motor Driven Roller
Diameter: 2.38" (60.5mm)
Voltage: 230 V Three Phase
Features
-Thermally stable motor that can be operated
24/7 without fear of overheating
-ABEC 1 Bearings
-DOM, zinc plated, carbon steel tube
-Special high impedance motor
allows loads to be accumulated
limitlessly without overheating
-12mm (0.47") Dia. D-Shafts
Dimensions
50mm
[1.97"]
5mm
[0.20"]
34mm
[1.34"]
46mm
[1.81"]
5mm
[0.20"]
Tube Length in mm (TL)
Between Frame in mm (BF)
BF=TL+15mm
Performance Data
No-Load
Speed
(ft/min)
Tangential
Force
Starting (lb)
Torque
Starting
(lb-in)
4
5
8
9
10
13
15
20
30
14.1
19.4
28.5
35.8
39.0
49.2
59.7
85.6
126.7
9.4
6.8
4.7
3.7
3.4
3.1
2.7
1.9
1.3
11.2
8.1
5.6
4.4
4.1
3.7
3.3
2.3
1.6
2 - 5.3 mm dia holes
for mounting to frame
2.9mm
[0.11"]
Mounting Hardware: A-200 Terminal Block
3Φ 230V 60Hz
Speed
Code
M5
64.5mm
[2.54"]
10mm
[0.39"]
24mm
[0.94"]
50mm
[1.98"]
45mm
[1.77"]
60mm
[2.36"]
12mm
[0.47"]
Ø60.5mm
[2.38"]
9mm
[0.35"]
17mm
[0.67"]
51mm
[2.01"]
15mm
[0.59"]
Environment
Current (A)
No-Load
Rated
Starting
0.05
0.05
0.06
-Ambient Temperature
14~104º F (-10~40ºC)
- < 90% Relative Humidity
(No Condensation)
-No Corrosive Gases
-Vibration < 0.5G
Operation
-Limitless
-Continuous or Intermittent duty
-Do Not Exceed 150%
of No-Load Speed
Minimum Tube Lengths and Options
Without spring loaded shaft
With spring loaded shaft
Standard
MIN
200 mm (7.87")
Lagging
250 mm (9.84")
EC Free Clutch
MIN
280 mm (11.02)
DR Drip proof IP-55
MIN
200 mm (7.87")
WA Waterproof IP-65
MIN
260 mm (10.24")
Wide range of rubber laggings available
VP V-Belt pulley end cap
250 mm (9.84")
P2 Double Groove Tube (65/30)
MIN
310 mm (12.20")
330 mm (13.00")
260 mm (10.24")
Check with your Itoh Denki representative for WA speeds available
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
51
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
PM763BS AC Motor Driven Roller
Diameter: 3.0" (76.3mm)
Voltage: 230 V Three Phase
-Operation without oil bath
-ABEC 1 Bearings
-Class E insulation
-Drip proof design (IP55)
-DOM, zinc plated, carbon steel tube
Features
-Designed to drive compact
belt conveyors for light to
medium load handling
-20mm (0.79") dual flat shafts
-Crowned tube standard
Crowned
Crowned
2 - 8.38 mm [0.33"] Dia. hole
for mounting to frame
Straight tube also available
Tangential
Force
Starting (lb)
Torque
Starting
(lb-in)
5
8
10
20
30
40
19.7
26.6
40.0
81.0
109.6
167.6
243.4
182.1
120.8
66.0
48.9
31.8
365.5
273.5
181.4
99.1
73.5
47.8
-Built in thermal overload protection
Environment
Current (A)
No-Load
Rated
Starting
0.19
0.29
1.07
-Ambient Temperature
14~104º F (-10~40ºC)
- < 90% Relative Humidity
(No Condensation)
-No Corrosive Gases
-Vibration < 0.5G
Operation
-Cycle: 10s ON; 10s OFF
-Continuous or Intermittent duty
-Do Not Exceed 150%
of No-Load Speed
Maximum Transported Load on Belted Conveyor
Max Load
Kg Lb.
40 88
30 66
20 44
15 33
8
18
4
8.8
40mm
[1.57"]
Protection
3Φ 230V 60Hz
No-Load
Speed
(ft/min)
6mm Thick
[0.24"]
Mounting Hardware: M-021-B
Performance Data
Speed
Code
20mm
[0.79"]
12mm
[0.47"]
70mm
[2.76"]
300mm
[11.81"]
14mm
[.55"]
Between Frame in mm (BF)
BF=TL+30mm
Speed
Code
5
8
10
20
30
40
58mm
[2.28"]
60mm
[2.36"]
76.3mm
[3.00"]
12.5mm
[.49"]
74mm
[2.91"]
20mm
[.79"]
18.5mm
[.73"]
Tube Length in mm (TL)
12.5mm
[.49"]
14mm
[0.56"]
Dimensions
18.5mm
[.73"]
Referenced load values were obtained under the following test parameters:
Conveyor length: 4 meters (13ft.)
Belt width: 500 mm (20")
Belt thickness: 1 mm (0.040")
Power source: 230VAC/3-PH
Conveyor angle: Horizontal (without carrier rollers)
Minimum Tube Lengths and Options
Without spring loaded shaft
Standard
MIN
WA Waterproof IP-65
MIN
250 mm (9.84")
BR Brake
250 mm (9.84")
Lagging
Wide range of rubber laggings available
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
MIN
52
300 mm (11.81")
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
F-RAT (Flat Right Angle Transfer) S style
Voltage: 24 VDC
Maximum load weight
Speed code
Features
Size A
17 (56 FPM) 37.5 kg (82.5 lbs)
Size B, C, D
50 kg (110 lbs)
F- RAT-S specifications
60 (197 FPM) 37.5 kg (82.5 lbs)
50 kg (110 lbs)
90 (295 FPM) 10 kg (22 lbs)
10 kg (22 lbs)

Drop in Installation into existing MDR frames

Three Motors –Spine (belts), Lifting/Dropping Mechanism, Transfer Rollers

Controlled with Itoh Denki’s IB 4 zone cards

Minimum Package Size: 300mm (11.81”) x 300mm (11.81”)

Minimum Height: 170 mm (6.69”)

Transfer Capacity: 2500/hr (Based on 13.8” x 15.4”, 66lb package)

Available in the following standard sizes:
F-RAT size
Recommended Product Size
15” wide X 30” long, Size A W 300mm (11.8") x L 350mm (13.8")~ W 300mm (11.8") x L 650mm (25.6")
20” wide X 30” long, Size B W 300mm (11.8") x L 350mm (13.8")~ W 400mm (15.7") x L 650mm (25.6")
24” wide X 30” long, Size C W 300mm (11.8") x L 350mm (13.8")~ W 500mm (19.7") x L 650mm (25.6")
28” wide X 30” long, Size D W 300mm (11.8") x L 350mm (13.8")~ W 600mm (23.6") x L 650mm (25.6")
Dimensions
508 MM
[20.00"]
MINIMUM BETWEEN FRAME
497 MM
[19.57"]
100 MM
[3.94"]
[4.02"]
102 MM
F-RAT-S OUTSIDE DIMENSION
100 MM
[3.94"]
100 MM
[3.94"]
104 MM
[4.09"]
Example 20" X 30"
170 MM
[6.69"]
146 MM
[5.73"]
758 MM
[29.84"]
Basic Specifications
Roller Diameter: 50.0 mm
Size BF Width (W) Transfer direction: 15", 20", 24", 28"
Length (L) Spine direction: 30"
Height: 170mm (6.69")
Transfer / Spine Speed: 56, 197, 295 FPM
Stroke: 10mm 0.39")
Power voltage: DC24V
Ambient temperature: 0 ~ 40 deg. C (No freezing)
Humidity: Below 90%RH (No condensation)
Atmosphere: No corrosive gas
Vibration: Below 0.5G
Installation: Indoor
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
53
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
Terminal Blocks
A-200
Applicable Models: PM570AS, PM570AU, PM570BP, PM605AS, PM605AU, PM605BP
34mm
[1.34"]
46mm
[1.81"]
Features:
- Provided as a standard accessory for applicable models
- Each output shaft should be fixed by the applicable fitting.
In case output shaft turns freely, it causes wires to break
- The shaft hole and studs of the back plate are
offset, which allows the mounting plates to slide
down on the stud to fasten the output shaft securely.
- Supplied with M5 x 15 pan head phillips mounting bolts
and hardware
- If a grounding screw is required order A-200-G
64.5mm
[2.54"]
M5
45mm
[1.77"]
9mm
[0.35"]
51mm
[2.01"]
60mm
[2.36"]
24mm
[0.94"]
50mm
[1.98"]
2.9mm
[0.11"]
2 - 5.3 mm dia holes
for mounting to frame
A-800
9mm
[0.35"]
Applicable Models: PM570AS, PM570AU, PM570BP, PM605AS, PM605AU, PM605BP
Features:
24mm
[0.94"]
50mm
[1.98"]
- Same functionality of A-200 without the need to cut
or strip any wires
- No terminal connection is required, which drastically
slashes wiring time
- Supplied with M5 x 15 pan head phillips mounting bolts
and hardware
M5
34mm
[1.34"]
46mm
[1.81"]
64.5mm
[2.54"]
51mm
[2.01"]
45mm
[1.77"]
Bushing
2.9mm
[0.11"]
2 - 5.3 mm dia. holes
for mounting to frame
A-270-GS / A-280-GS
Earth
Terminal
M5
2 - 5.3 mm dia. holes
for mounting to frame
A-270-GS (flat on top) shown above
- The PM486BS is supplied with either the A-270-GS
(flat on top) or the A-280-GS (point on top) terminal
block to match the conveyor frame hole design
- Each output shaft should be fixed by the applicable
fitting. If the output shaft rotates freely it will
result in damage to the wires.
- Nuts must be torqued to 4.4 lb-ft (6 Nm)
- Supplied with M5 x 15 pan head phillips mounting bolts
and hardware
64.5mm
[2.54"]
45mm
[1.77"]
34mm
[1.34"]
46mm
[1.81"]
Features:
24mm
[0.94"]
50mm
[1.98"]
51mm
[2.01"]
60mm
[2.36"]
9mm
[0.35"]
Applicable Model: PM486BS
2.9mm
[0.11"]
A-280-GS (point on top) also available
E-920
Applicable Model: PM380AS, PM427AS
Features:
35mm
[1.38"]
44mm
[1.73"]
7mm
[0.28"]
26mm
[1.01"]
30mm
[1.18"]
Gromet
2.6mm
[0.10"]
40mm
[1.57"]
- Standard accessory for the PM380AS and PM427AS
- Each output shaft should be fixed by the applicable
fitting. If the output shaft rotates freely it will
result in damage to the wires.
- Supplied with M5 x 15 pan head phillips mounting bolts
and hardware
69mm
[2.72"]
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
54
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
Mounting Brackets Standard Torque
A-071-G / A-081-G
Applicable Models: PM486FS, PM486FE, PM486XE, PM486XP, PM570FE, PM605FE
9mm
[.35"]
16mm
[.63"]
Features:
45mm
[1.77"]
60mm
[2.36"]
51mm
[2.01"]
9mm
[.35"]
34mm
[1.34"]
Earth
Terminal
- Provided as a accessory for applicable models
- Each output shaft should be fixed by the applicable fitting.
In case output shaft turns freely, it causes wires to break
- The shaft hole and studs of the back plate are
offset, which allows the mounting plates to slide
down on the stud to fasten the output shaft securely.
- Nuts must be torqued to 2.2 lb-ft (3 Nm)
- Supplied with M5 x 15 pan head phillips mounting bolts
and hardware
M5
2.9mm
[.11"]
2 - 5.3mm dia. hole
for mounting to frame
46mm
[1.81"]
A-071-G (flat on top) shown above
A-081-G (point on top) also available
C-071 / C-081
Applicable Models: PM486FS, PM486FE, PM486XE, PM486XP, PM570FE, PM605FE
9mm
[0.35"]
16mm
[.63"]
Features:
30mm
[1.18"]
44mm
[1.73"]
9mm
[.35"]
36mm
[1.42"]
- This bracket is used where there is not enough room
for the A-071-G / A-081-G mounting bracket
- Each output shaft should be fixed by the applicable fitting.
In case output shaft turns freely, it causes wires to break
- The shaft hole and studs of the back plate are
offset, which allows the mounting plates to slide
down on the stud to fasten the output shaft securely.
- Nuts must be torqued to 2.2 lb-ft (3 Nm)
- Supplied with M5 x 15 pan head phillips mounting bolts
and hardware
M5
2.9mm
[0.11"]
2 - 5.3mm dia. hole
for mounting to frame
46mm
[1.81"]
C-071 (flat on top) shown above
C-001
C-081 (point on top) also available
Applicable Models: PM570AS, PM570AU, PM570BP, PM605AS, PM605AU, PM605BP, PMT50AS
Features:
30mm
[1.181"]
9mm
[.35"]
35mm
[1.38"]
46mm
[1.81"]
11mm
[0.43"]
16mm
[0.63"]
- This bracket is used where there is not enough room
for the A-200 terminal block
- Terminal block and safety cover are not available for this
- C-001-D stainless steel bracket is also available for
drip proof and water-proof models
- The shaft hole and studs of the back plate are
offset, which allows the mounting plates to slide
down on the stud to fasten the output shaft securely.
- Nuts must be torqued to 2.2 lb-ft (3 Nm)
- Supplied with M5 x 15 pan head phillips mounting bolts
and hardware
M5
2.9mm
[0.11"]
36mm
[1.42"]
2 - 5.3mm dia. hole
for mounting to frame
46mm
[1.81"]
M-021-B
Applicable Model: PM763BS
2 - 8.38 mm [0.33"] Dia. hole
for mounting to frame
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
20mm
[0.79"]
Features:
14mm
[0.56"]
- Optional bracket for PM763BS
- Each output shaft should be fixed by the applicable fitting.
In case output shaft turns freely, it causes wires to break
- Mounting hardware not included
6mm Thick
[0.24"]
12mm
[0.47"]
58mm
[2.28"]
70mm
[2.76"]
60mm
[2.36"]
40mm
[1.57"]
55
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
Mounting Brackets High Torque
P-0B1 / P-0C1
Applicable Model: PM486FP
50mm
[1.97"]
40mm
[1.58"]
33mm
[1.30"]
11.1mm
[0.44"]
R0
.
[R0 5mm
.02
"]
Features:
- Provided as an accessory for PM486FP
- Low profile and designed for maximum holding
of threaded hex shafts
- Supplied with nut (M12 x 1.25)
- Two required for each PM486FP
- Nuts must be torqued to 22.1 lb-ft (30 Nm)
3mm
[.12"]
10mm
[.39"]
22mm
[.87"]
21mm
[.83"]
18.5mm
[.73"]
1.5mm
[0.06"]
10mm
[0.39"]
Ø12.8mm
[0.51"]
P-0B1 (hex flat up) shown above
P-0C1 (hex point up) also available
MBB-071 / MBB-081
Applicable Model: PM486FP with JR shafts
Features:
- Provided as an accessory for
PM486FP with JR shafts
- The shaft hole of the middle plate is rotated a few degrees
which grips the shaft securely once the top
plate and nuts are tightened to the correct torque.
- Two required for each PM486FP
- Nuts must be torqued to 2.2 lb-ft (3 Nm)
- Supplied with M5 x 15 pan head phillips mounting bolts
and hardware
11.2mm
[0.44"]
45mm
[1.77"]
51mm
[2.01"]
60mm
[2.36"]
16mm
[0.63"]
34mm
[1.34"]
46mm
[1.81"]
4.6mm
[0.18"]
2 - 5.3mm dia. holes
for mounting to frame
MBB-071 (hex flat up) shown above
MBB-081 (hex point up) also available
A-071-G2 / A-081-G2
Applicable Model: PM486FH and PM486FP with JR shafts
34mm
[1.34"]
Earth Terminal
2.9mm
[0.11"]
2 - 5.3mm dia. holes
for mounting to frame
46mm
[1.81"]
A-071-G2 (hex flat up) shown above
A-081-G2 (hex point up) also available
P-0D1 / P-0E1
Applicable Models: PM635FS, PM635KE
60mm
[2.36"]
12mm
[0.47"]
34.6mm
[1.36"]
3mm
[0.12"]
Features:
22mm
[0.87"]
34mm
[1.34"]
50mm
[1.97"]
43mm
[1.69"]
Features:
- Provided as an accessory for PM486FH
and PM486FP with JR shafts
- The shaft hole of the middle plate is rotated a few degrees
which grips the shaft securely once the top
plate and nuts are tightened to the correct torque.
- Two required for each PM486FH and PM486FP
- Nuts must be torqued to 2.2 lb-ft (3 Nm)
- Supplied with M5 x 15 pan head phillips mounting bolts
and hardware
9mm
[0.37"]
45mm
[1.77"]
51mm
[2.01"]
60mm
[2.36"]
16mm
[0.63"]
- Provided as an accessory for PM635FS
- Low profile and designed for maximum holding
of threaded hex shafts
- Supplied with nut (M20 x 1.5)
- One required for each PM635
- Nuts must be torqued to 110.6 lb-ft (149.5 Nm)
30mm
[1.18"]
1.5mm
[0.06"]
P-0D1 (hex flat up) shown
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
P-0E1 (hex point up) also available
56
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
Molded Extension Cables
Available only for DC Power Mollers that require extra cable length
Cables available in the following standard lengths:
- 600mm (23.62"), 1200mm (47.24"), and 2700mm (106.30")
Allows for easy hook up between Power Moller roller cable and driver card
Available in the following configurations:
- 9 pin male to 9 pin female
- 9 pin male to 10 pin female
- 10 pin male to 10 pin female
- 12 pin male to 12 pin female
Example Model Numbers:
M-F
—
Male
Female
M-F
—
Male
Female
EXT
—
9 PIN
—
Notes
- Maximum distance from
roller to card - 3000mm
-Ambient Temperature
-22~140º F (-30~60ºC)
600
Extension
Cable
Number
of Pins
Cable
Length
EXT
— 9 PIN/10 PIN —
1200
Extension
Cable
Number
of Pins
Cable
Length
Length
30mm
[1.18"]
9 Pin Male
9 Pin Female
10mm
[0.39"]
37mm
[1.46"]
60mm
[2.36"]
M-F-EXT-9 PIN-LENGTH (MM)
Length
32.5mm
[1.28"]
10 Pin Male
10 Pin Female
37mm
[1.46"]
10mm
[0.39"]
60mm
[2.36"]
M-F-EXT-10 PIN-LENGTH (MM)
Length
37.5mm
[1.48"]
12 Pin Male
12 Pin Female
10mm
[0.39"]
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
37mm
[1.46"]
60mm
[2.36"]
M-F-EXT-12 PIN-LENGTH (MM)
57
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
Technical Information
LOCKING:
As a special outer rotor is used for the Power Moller's motor, the coil will not burn out when the
POWER MOLLER is locked under conductance for a short period of time. But repeated locking
will raise the temperature of the motor coil and result in gradual deterioration of the insulation and
eventually cause the motor to burn out. It’s unnecessary to turn off the power when the POWER
MOLLER is locked under conductance for a few seconds. However, if locking longer than 10
seconds is required, it is necessary to turn off the power or use the accumulation type.
TYPE
Standard
Accumulation
Incidental locking time without rise of motor damage
PM570AS
PM605AS Maximum 20 minutes
PMT50AS
PM570AU
Continuous locking allowed
PM605AU
CONTACT TIME / CYCLE TIME / DUTY CYCLE:
Due to temperature rise of the coil winding, the minimum contact time during intermittent
operation is approximately as specified below:
TYPE
Minimum Contact Time
PM486 1 second ON / 1 second OFF
PM570AS
PM605AS 3 seconds ON / 2 seconds OFF
Standard
PMT50AS
Accumulation
PM570AU
Limitless
PM605AU
DUTY CYCLE= TIME ON / TIME ON + TIME OFF
Example:
DUTY CYCLE = 20 SECONDS ON / 20 SECONDS ON + 20 SECONDS OFF DUTY CYCLE =
0.5 OR 50%
TEMPERATURE RISE:
The POWER MOLLER is designed to operate within an ambient temperature of -10°- C (14°- F)
to 40°- C (104°- F). The temperature of the roller tube rises about 20°- C (68°- F) above the
ambient during normal usage. The following graphs represent the temperature characteristics of a
typical POWER MOLLER. Please contact your Itoh Denki representative for information on
additional POWER MOLLER models.
INERTIA AND INTERMITTENT OPERATION:
A. As a result of motor inertia, the POWER MOLLER will not instantly stop rotating after the
power is disconnected.
B. Inertia values differ in accordance with motor type, speed, operation time as well as weigh of
the load.
C. Inertia can be eliminated by using the POWER MOLLER with built-in brake
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
58
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
Technical Information
BRAKE INFORMATION:
A - In automated conveyor lines, it is sometimes necessary to precisely stop or position the article
being transferred. In these cases, the optional built-in electromagnetic brake should be used.


When not powered, the built-in electro-magnet uses spring force to lock the motor and
prevent the tube rotation. The motor is released when the brake is powered (energized).
Ordinarily, the power to the brake and motor is controlled simultaneously.
In most cases, an external mechanical stop can be eliminated by using the POWER
MOLLER with the built-in brake. However, the stopping distance may vary slightly
depending on the load, speed, etc.
B. - In gravity lines, it is often necessary to control the descent of the load to prevent damage to
the articles accumulated at the end of the line. In this case, the standard POWER MOLLER can
act as a brake roller.

When the rotation speed of the POWER MOLLER is increased by 10-20% from its
nominal speed, it functions as an induction generator and braking torque is applied to the
load.

By incorporating POWER MOLLERs at several points in a self-traveling gravity line,
speeding or congestion of the loads will be prevented.
Braking characteristics vary by POWER MOLLER model and weight transferred. Please contact
your Itoh Denki representative for additional information.
LEVEL OF CONVEYING SURFACE:
A. - If the bottom surface of the load is not flat or the conveyor rollers are not level, then the
POWER MOLLER may rotate freely and the load may not be transferred or may tend to drift. It is
especially important when transferring relatively heavy loads that the static load limit of the
POWER MOLLER is not exceeded.
B. - Transferring light loads (less than 5kg) may be impeded by the resistance of idler rollers.
Check to be sure that the idlers spin freely.
C. - Due to packing (binding) bands, bulging of the bottom of the load, etc., the load may lean to
one side during transfer. The use of rubber lagging on each end of the POWER MOLLER would
facilitate a straight transfer of the load.
When the diameters of the roller tube and the shafts of the POWER MOLLER are the same as
that of idler rollers, the existing shaft holes in the conveyor frame can be used without any
modification. If these dimensions are not the same, the level of the POWER MOLLER must be
adjusted by hanging the height of the shaft holes in the frame so that the load will be evenly
applied to all the rollers.
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
59
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
Technical Information
STATIC LOAD:
TYPE
Outside
Wall Thickness
Diameter
of Tube
of Tube
mm
PM380AS
in
mm
in
GA
1.50 1.2 0.05
18
PM427AS 42.7 1.68 1.5 0.06
16
48.6 1.91 1.4 0.05
17
Small
1.97 1.6 0.06
16
57
2.25 1.6 0.06
16
PM605
60.5 2.38 3.2 0.13
11
PM635
63.5 2.50
0.12
11
PM763BS 76.3 3.00 3.6 0.14
10
PM486
PMT50AS
PM570
IP-G
38
Ø 50
115 4.53
3
4
0.16
8
Tube lengths - mm (in)
200
(7.8)
250 300 400 500 600 700 800 900 1000
(9.8) (11.8) (15.7) (19.7) (23.6) (27.6) (31.5) (35.4) (39.4)
Thrust
Load
Maximum Static Load Per Power Moller - kg (lbs)
50
45
45
40
35
30
----(110) (99) (99) (88) (77) (66)
75
65
65
55
45
35
30
25
--30 (66)
(165) (143) (143) (121) (99) (77) (66) (55)
65
65
65
55
45
35
30
25
20
20
(143) (143) (143) (121) (99) (77) (66) (55) (44) (44)
100 100 80
80
60
60
----(220) (220) (176) (176) (132) (132)
120 100 100 100 80
80
60
60
50
50
50 (110)
(266) (220) (220) (220) (176) (176) (132) (132) (110) (110)
190 160 160 160 130 130 100 100 80
80
(419) (353) (353) (353) (287) (287) (220) (220) (176) (176)
Any length - 306.8 kg (675 lbs.)
250 250 225 200 200
-----(551) (551) (496) (440) (440)
70 (154)
400 400 350 350 300
-----(880) (880) (770) (770) (660)
IMPACT LOADING:
In applications where the article being transferred is dropped onto the POWER MOLLER, reduce static load limits
in the above table by 50% to compensate for the increased forces generated from impact. As the load limit will
vary considerably in accordance with the intensity of impact, allow a substantial margin of safety.
CHANGE IN TRANSPORTING SPEED:
The peripheral velocity (transportation speed) of the POWER MOLLER is dependent upon the weight and material
composition of the load as well as the ambient temperature. Please contact your Itoh Denki representative for
additional technical information.
Care should be taken to avoid exposing the POWER MOLLER too excessive shock as a result of drastic load
speed changes with-in a line or between adjoining lines. Although depending on the weight and speed of the load,
typically no harm is done by load speed changes within 50% of nominal POWER MOLLER speed. Also slave
driving idlers and load weights can have an effect on the speed of the POWER MOLLER.
INVERTER USE:
When using a frequency inverter / variable frequency drive for AC rollers Itoh Denki recommends utilizing a
surge protector into the line to decrease the possibility of high voltage spikes. Note - change in frequency
may affect performance.
Safe operating frequencies
PM570BP
PM486BS
PM605BP
PM570AS
30-90 Hz
30-70 Hz
PM605AS
PM763BS
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
60
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
Options
RUBBER LAGGINGS – NR, UR, NB, CR
Prevents light loads from slipping and protects the surface of loads during transfer. Lagging is
molded (vulcanized) on to tube to assure permanent adhesion. Options include
Type
NR
UR
NB
CR
Material
Natural Rubber
Urethane
NBR
Neoprene
Use
General
Abrasion Resistant
Oil Resistant
Heat Resistant
Color
black
grey
black
black
Hardness
60-65 durometer
90 durometer
60-65 durometer
60-65 durometer
*Different thicknesses are available most common 3mm thick
Contact an Itoh Denki representative for more details
FREE CLUTCH - EC
* When power is on, the POWER MOLLER functions normally.
* When power is off, the POWER MOLLER functions as an idler roller.
* Available for PM570AS/PM605AS series models.
* The minimum tube length that Free Clutch option can be
attached to is 11". In case the POWER MOLLER has a
spring-loaded end cap, the said minimum length is 13".
* Free Clutch option can be added to the POWER MOLLER with
brake. In this case, the minimum tube lengths are 13" without
a spring-loaded end cap and 15" with a spring-loaded end cap.
CLEAN ROOM
Designed for the handling line that requires a high degree of cleanliness, such as in the
electronics, food and pharmaceuticals industries etc.
Model
FS
FE
FP
POWER MOLLER CLEAN ROOM CLASSIFICATIONS
Class 10,000
Class 1000
Class 100
Yes, no option needed Yes, DR with SS tube, SS shaft
Yes, with WA
Yes, no option needed Yes, DR with SS tube, SS shaft
Yes, with WA
Yes, no option needed Yes, DR with SS tube, SS shaft
N/A
WATERPROOF - WA
Designed for outdoor lines or lines subject to water spray (washdown).
Output and attaching shafts, end caps and tubes are made of stainless steel to resist corrosion.
Waterproof specification IP-65, IEC 529.
* Direct Water Spray to Shafts in Washdown Application may reduce life of the roller.
* Waterproof Option may affect speed and torque
LOW TEMP ROLLER – LT
Operates in temperatures down to -30° C (-22° F). Includes low temperature grease, air removal
inside tube, rust-proof internal circuitry, reinforced gearbox and low temperature mechanical
operation.
DRIP PROOF - DR
Designed for conveyor lines in high moisture areas. Rubber seals and o-rings protect internals
Meets or exceeds IP-55 specifications.
MOUNTING BRACKETS NOT INCLUDED - KF
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
61
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
Options
BUILT-IN BRAKE – BR
Eliminate load inertia and enable precise holding. Electromagnetic brake is engaged by spring
force when power to the motor is interrupted.
Standard Brake
DC Model*
PM380DS-2
PM380DS-5
PM380DS-10
PM380DS-15
PM486FE-5,8,10,15,17
PM486FE-20,30,45,55,60
PM486FE-70,100,140,180,210
PM486FS-5,8,10,15
PM486FS-20,30,45,55
PM486FP-5,8,10,15
PM486FP-20,30,45,55
PM486FP-70,100,140,180
PM570FE-5,8,10,15
PM570FE-20,30,45,55
PM570FE-70,100,140,180
Diameter
(mm)
38
38
38
38
48.6
48.6
48.6
48.6
48.6
48.6
48.6
48.6
57
57
57
*Contact an Itoh representative for AC models.
Effective static brake
Torque
Tangential force
(N·m) (lb·ft)
(N)
(lb)
46.6
34.5
2452.5
551.8
20.6
15.2
1083.9
243.9
7.9
5.8
418.3
94.1
3.4
2.5
180.6
40.6
9.2
6.8
379.9
85.5
2.2
1.6
90.6
20.4
0.6
0.4
22.8
5.1
9.0
6.7
370.7
83.4
2.0
1.5
83.5
18.8
9.0
6.7
370.7
83.4
2.0
1.5
83.5
18.8
0.4
0.3
16.4
3.7
9.2
6.8
323.9
72.9
2.2
1.6
77.2
17.4
0.6
0.4
19.4
4.4
HIGH TORQUE BRAKE – BR-OS
Available for FS, FE, and FP rollers
Up to 39% more torque than standard brake, designated by blue band on cable
Can be controlled with CB-016 and HB-510 series driver cards (Not to be used with
CB-005 or HB-508)
High Torque Brake
DC Model*
PM486FE-5,8,10,15,17
PM486FE-20,30,45,55,60
PM486FE-70,100,140,180,210
PM486FS-5,8,10,15
PM486FS-20,30,45,55
PM486FP-5,8,10,15
PM486FP-20,30,45,55
PM486FP-70,100,140,180
PM570FE-5,8,10,15
PM570FE-20,30,45,55
PM570FE-70,100,140,180
Effective static brake
Diameter
Torque
Tangential force
(mm)
(N·m) (lb·ft)
(N)
(lb)
48.6
12.8
9.5
526.1
118.4
48.6
3.0
2.2
125.4
28.2
48.6
0.8
0.6
31.5
7.1
48.6
12.5
9.3
513.3
115.5
48.6
2.8
2.1
115.6
26.0
48.6
12.5
9.3
513.3
115.5
48.6
2.8
2.1
115.6
26.0
48.6
0.6
0.4
22.7
5.1
57
12.8
9.5
448.5
100.9
57
3.0
2.2
106.9
24.1
57
0.8
0.6
26.9
6.1
*Contact an Itoh representative for AC models.
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
62
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
Belt Pulley and Grooves
VP V-Belt Pulley
Applicable Models: PM380AS, PM427AS, All PM486, All PM570, All PM605
20mm
[0.79"] 7.6mm
[0.30"]
Features:
- Special end cap designed to accommodate small V-belts
- Provides maximum clearance between
Power Moller and idler rollers power transmission belts
- Spring loaded shaft is standard for all tube lengths
- Between Frame - 35mm = Tube Length**
42mm
[1.65"]
32mm
[1.26"]
4.8mm
[0.19"]
2.2mm
[0.09"]
PM570 with VP end cap shown
37°
RP Round Belt Pulley
Applicable Models: PM380AS, PM427AS, All PM486, All PM570, All PM605
Features:
- Special end cap designed to accommodate round belts
- Provides maximum clearance between
Power Moller and idler rollers power transmission belts
- Spring loaded shaft is standard for all tube lengths
- Between Frame - 35mm = Tube Length**
R
[R 3mm
0.1
2"]
42mm
[1.65"]
36mm
[1.42"]
5mm
[0.20"]
20mm
[0.79"] 8mm
[0.31"]
6mm
[0.24"]
PM486 with RP end cap shown
VG Poly V-Belt Pulley
Applicable Models: PM486FE, PM486XE, PM486XP, PM635FS, PM635KE
Features:
26mm
[1.02"]
42.3mm
[1.67"]
- Special end cap designed to accommodate Poly V-belts
- High efficiency power transmission
- Provides maximum clearance between
Power Moller and idler rollers power transmission belts
- Spring loaded shaft is standard for all tube lengths
- Between Frame - 41mm = Tube Length for PM486 series**
- Between Frame - 66mm = Tube Length for PM635 series
21.1mm
[0.83"]
PM486 with VG shown
P2 Double Grooved Tube
Applicable Models: All PM486, PM570, PM605
50mm
[1.97"]
Features:
32mm
[1.26"]
- Simple and effective power transfer design
- Groove locations are measured from the end of the tube
to the center of the first groove, the second groove measured
from the center of the first groove to the center of the second
- Standard locations for a PM486 are 50/32 (mm)*
- Standard locations for a PM570, PM605 are 65/30 (mm)*
PM486 with P2 shown
*Other groove locations are available
Contact an Itoh Denki representative for details
**Note if using the JQ shaft option subtract an additional 6mm
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
63
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
Installation Precautions
Installation Precautions – IMPORTANT, PLEASE READ BEFORE INSTALLATION
Precaution
Power supply
Action
Reason
If the power supply is not sized
appropriately for the number of
cards/rollers it provides power to,
then a low voltage condition may
occur.
-
If the voltage drops below 15V DC
and remains low for 1s, then the low
voltage error will appear
If the voltage drops below 15V DC
five times in 0.5s, then the low
voltage error will appear
If the voltage drops below 15V DC
less than five times in 0.5s or does
not remain low for 1s, the roller may
stutter – quickly turning off then on.
Multiple power
supplies
0V line of all power supplies on the
same conveyor line (powering the
card/rollers, & controls) need to be
physically linked together.
This completes the signal path from one
section of the conveyor (powered by a
power supply) to the adjacent section of
conveyor (powered by another power
supply) and allows for proper
communication through the cable and
external interfaces.
Voltage drop across
the power bus
Use suitable gauge wire in relation to
distance and current draw to prevent
voltage drop.
When running long distances from a DC
power supply, the voltage drop during
motor operation across the power bus
may be significant (may drop below 15V!).
If there is a large enough drop in voltage,
the roller(s) may behave in a strange
manner. In order to prevent this, a larger
gauge wire must be used.
Operating DC voltage is 24V ±10%
Grounding
Ensure the control card is securely
grounded to the conveyor frame. The
conveyor frame should also be at the
same potential reference as earth
ground. Standard grounding
practices should be followed.
Static discharge may interfere and
damage internal components.
Electrical
24V DC ±10%
4A maximum current limiter
(motor lock is 4A)
Diode protection for miswiring
Sensor power short circuit protection
5A fuse for power supply protection
Improper power will damage the card.
The motor/card should not be subject to
locked conditions repeatedly.
Internal fuse is not replaceable. If the
fuse has blown, more serious damage has
occurred within the card/motor.
Environment
Ambient temperature is 32~104°F
Ambient humidity is < 90%RH
Atmosphere has no corrosive gas
Vibration is < 0.5G
Indoor use only
Extreme environmental variables may
cause poor or no performance and
damage the card.
Over-speeding
Over-speeding of the roller’s no-load
speed by more than 50% may cause
damage.
Back EMF will be generated.
Speed Variation
Speed Tolerance +/- 3%-10%
depending on model.
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
64
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
AC Wiring
Single Phase
Three Phase
For reverse rotation switch the position
For reverse rotation switch the position
of the black and white wires
of any two (2) of the three (3) wires
Basic wiring for Power Moller
Main Switch
Condenser
Condenser
AC 115V Single Phase
AC 115V Single phase motors
Terminal
Block
Black
Red
Power
Moller
White
Black
Red
Black
Red
White
Terminal
Block
White
Power
Moller
Power
Moller
Black
Red
White
Power
Moller
Main Switch
AC 230V 3-Phase
AC 230V Three phase motors
Black
Red
Power
Moller
White
Yellow Green*
PM763BS and IP-G Wiring
Main Switch
AC 230V 3-Phase
Ground
AC 230V Three phase motor
*Yellow green ground wire is an option (GW) however its not necessary for operation
BR Brake voltage same as motor voltage
Terminal
Block
Condenser
Main Switch
AC 115V Single Phase
AC 115V Single phase brake and motor
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
Red
Black
White
Yellow
Yellow
Power
Moller
White
Black
Red
Gray
Gray
Power
Moller
Terminal
Block
Main Switch
AC 230V 3-Phase
AC 230V Three phase brake and motor
65
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
AC Wiring
BR-OS Brake voltage DC, motor voltage AC
Terminal
Block
Main Switch
Red
White
Black
Green
Green
Power
Moller
Red
Black
White
Brown
Brown
Power
Moller
Terminal
Block
AC 230V 3-Phase
Main Switch
AC 230V 3-Phase
DC Power Supply
DC Power Supply
DC 100V Brake, motor voltage AC
DC 24V Brake, motor voltage AC
EC Free Clutch voltage same as motor
Terminal
Block
Condenser
Main Switch
Red
Black
White
Orange
Orange
Power
Moller
White
Black
Red
Green
Green
Power
Moller
AC 115V Single Phase
AC 115V Single phase free clutch and motor
Terminal
Block
Main Switch
AC 230V 3-Phase
AC 230V Three phase free clutch and motor
EC-OS Free Clutch voltage DC, motor voltage AC
Terminal
Block
Main Switch
AC 230V 3-Phase
Red
Black
Terminal
Block
Main Switch
AC 230V 3-Phase
DC Power Supply
DC Power Supply
DC 100V Free clutch, motor voltage AC
Itoh Denki USA, Inc.
135 Stewart Road
Wilkes-Barre, PA 18706
White
Yellow
Yellow
Power
Moller
Red
White
Black
Gray
Gray
Power
Moller
DC 24V Free clutch, motor voltage AC
66
www.itohdenki.com
Phone 888-310-8811
Specifications subject to change without notice.
Itoh Denki USA, Inc.
135 Stewart Road
Hanover Industrial Estates
Wilkes-Barre, PA 18706-1462
Telephone: 888-310-8811
Fax: 570-820-8838
www.itohdenki.com
E-mail: info@itohdenki.com
Itoh Denki Co., LTD
1146-2 Asazuma-Cho, Kasai
Hyogo Ken 679-0180, Japan
Telephone: 81(0790) 47-0955
Fax: 81(0790) 47-1325
E-mail: info@itohdenki.co.jp
www.itohdenki.co.jp
Itoh Denki Europe S.A.
490 Avenue des Jourdies
ZAE les Jourdies-BP323, 74807
St Pierre en Faucigny
Cedex, France
Telephone: (33) 4-50-030999
Fax: (33) 4-50-030760
E-mail: info@itoh-denki.com
www.itoh-denki.com
Itoh Denki Asia LTD
Itoh Denki Shanghai Co., LTD
Unit F. 22nd Floor
Add: No 689, room 1812
Tsim Sha Tsui, Kowlon, Hong Kong
Shanghai P.R. 200001, China
No.8 Hart Avenue
Guangdong Rd.
Telephone: (852) 2427-2576
Telephone: +86-21-63410181
Fax: (852) 2427-2203
Fax: +86-21-63410180
www.itohdenki.com.cn
2014
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising