owner`s manual
Car Double Din DVD Navigation Entertainment System
Table of contents
Function summary ··············································································································2
Notice for use ······················································································································2
Audio and Video knowledge ·······························································································3
Menu operation····················································································································4
1. Main interface ···············································································································4
2. PIP function ··················································································································4
3. Radio interface ·············································································································4
4. Multimedia player ·········································································································5
Play disc ··················································································································5
Play SD/USB ···········································································································5
Detailed operation····································································································6
5. GPS navigation system ································································································6
6. Bluetooth ······················································································································7
7. TV function ···················································································································7
8. IPod function ················································································································8
9. Setting interface ···········································································································9
System setting ··········································································································9
Vedio setting ···········································································································10
Audio setting ···········································································································10
Time setting ············································································································10
Language setting·····································································································10
SWC setting ············································································································11
System info. Setting ································································································11
Start logo setting ·····································································································12
Off-screen setting ····································································································12
Navigation audio setting ··························································································12
10. User friendly ·············································································································13
Remote control ··················································································································14
Troubleshooting ················································································································15
System Parameter ·············································································································16
Thank you for selecting our products! Hope this user’s manual facilitate your
understanding of product operating method. Our company has the right to make final
description of the Operating Instructions of this product. Before use, please be sure to read it
carefully for safe operation and better entertainment.
Main features:
1. High Definition TFT-LCD digital screen.
2.Built-in AM/FM receiver, with 30 preset stations , RDS available
3.Compatible with DVD/VCD /CD/MP3/WMA/MP4/JPGE/AVI
4.With multi-language
5.Built-in GPS multimedia system
6.Built-in bluetooth function, with touch input
7.GPS sound output mode can be defined.
8.With AV output, can be connected with amplifier and monitor
9.Aux-in function, can be connected with external AV output device
10.Support USB/SD audio/vedio/picture display
11.Auto recognition of NTSC/PAL system
12.Hi-fi highpower output
13.Real time display
14. Rearview camera input, automatically change to rearview when reversing (A camera is
15.Built-in CMMB digital TV(optional)
16.Full function remote control
17.Easy for installation
Notice of use
Attention: Before installation, please carefully read all the instructions. Car audio
professional vendors’ guidance are recommended for the installation.
This model fits automobile 12V power supply system( ground wire should
be connected). Please do not install it directly in truck or bus with 24V
power supply, otherwise will cause machine damage.
Original disc is required. Please do not use non-standard or inferior
disc, otherwise may cause machine malfunction or serious impact on
its service life.
Replace of power fuse without professional instruction is prohibited.
The improper use of fuse will cause machine damage or a fire.
Do not place the unit in moist and humid conditions to avoid electric
shock, damage and fire caused by short circuit.
Do not touch the screen with hard objects to avoid touch screen
Attention: To avoid short circuit, please stall the car and disconnect ACC and the
connection with B+.
Audio and Video knowledge
Disc types
Sound & Picture
Sound & Picture
Sound & Picture
Sound & Picture
Notice: This product supports VCD dis of 1.0/1.1/2.0/3.0 version
Disc size
Main interface
In the status of ON, touch the top left of the screen to enter intomain interface.
The system provides functions of Navigation,Radio,TV,USB,DVD,SD card,BT music,3G
Network,Setup,AUX,Ipod,Bluetooth. Touch the icons in the main interface to enter into the
relavent function.
The main interface is made of several icons for different functions. Touch the icons in the
main menu to enter into the second-level menu. Under second-level mune, touch
icon to return to previsous menu.
Navigation system
1. Be careful to use the GPS system. The functions of this system is for navigation reference
only, so please do use it for accurate measurement of the position, distance, location, terrain,
2. During the first GPS satellite positioning, please stay in the same location, where there
shall be open area and without any shelter on the topappropriate open space at the top of
may not have shelter. It may need more than two minutes to finish the positioning, depending
on the environment and satellite signal strength.
3. For your driving safety, please finish the navigation setup before going out on the road.
Please do not operate the system when driving because it may lead to a traffic accident if the
area ahead is neglected.
4. When passing through the tunnel, or the car is located in the building, the underpass,
climatic factors, or the surrounding tall obstacles, or nearby mobile phone base stations,
satellite signal reception quality will be affected, then the system will be temporarily unable to
provide you with positioning and navigation. While leaving the sources of influence, you can
quickly restore the positioning and navigation.
5. Please note that any wireless telecommunication products(such as mobile phones or
speed alarms), are likely to interfere with satellite reception, resulting in signal reception
6. Path planning is for reference only. The road conditions may be adjusted according to the
local traffic situation, or because of some factors such as road construction, government and
commercial activities. Please be sure to follow the current road situation and other traffic
rules.If the road situation is different from display display, please judge which way to take.
★Detailed instructions of GPS
■ Set navigation path. Click “Set-up” in the home page to enter into setting interface,
then click”Navi set” to set the Navigation path,shown as below:
■ After navigation path setup, return to the main interface, click navigation icon to turn to
navigation interface, then the system will turn to navigation interface and start running the
navigation software.shown as below picture:
Radio interface
Radio menu,this product is built-in high quality AM/FM/RDS radio receiver, which supports
AM/FM auto search function, frequency display, etc.
---Sound button. When it shows
, you can adjust the volume; Press this
button, the icon will be changed to
, which is mute state.
---Short press this button to upward adjust the station gradually; Long press this
button to upward search the station semi-automatically.
--- Short press this button to downward adjust the station gradually; Long press this
button to downward search the station semi-automatically.
BAND--- Press this button to switch radio bands.
Scan--- Short press this button to scan the stations in prestored district; Long press this
button to automatically search station and put the searched stations into the prestored
district orderly according to signal strength.
ST--- Single track. In FM band, press this button to switch between ST and MONO. The
default setting is ST. AM band doesn’t have this function.
DX---In FM band, press this button to switch between LOC and DX. The default setting
is DX. AM band doesn’t have this function.
BK--- Short press this button to switch radio skin.
Both sides are for prestored station region. Short press any station number of this
region, it will play the station that chose; Long press any station number, the station that
being played will be restored.
Note: This function can be achieved by short/long press number 1-6 of the remote
TV function
The system is built-in TV function. It supports TV signal inputs of all colour and sound
systems. shown as follow picture:
★ Enter
Click TV icon in main interface/press MODE key in remote controll to switch and enter TV
mode. Touch "Auto Search" button to start automatic search of TV channels. The channels
that searched will be stored automatically.
touch screen, the "Auto Search" button to start automatic search TV channels, the search
range for the entire TV channel range, automatic memory search to TV channels to the serial
number increments preset channel bodyin
★ Exit
Select or automatically turn to other play mode.
Play USB
When the device is under running state,the system will automatically switch to USB/SD play
mode after connecting to USB/SD,When USB/SD is connected to the device that is not under
running state,it shall click “USB”/”SD” icon in main interface/prss mode key in remote controll
to switch play source to USB/SD play mode after the device runs. Formats supported by
USB/SD: MP3/WMA/MP4/JPEG/ BMP etc.Shown as below picture:
★Play DVD
Attention: Please use standard and genius discs and keep the discs clean. Proper use can
assure normal service life of this product.
Insert the disc into disc inlet slightly, the disc will be suctioned into the device and played
When there is a disc in the device, press MODE or click DVD icon in the main interface, it will
turn to disc display menu. If the disc is stucked or cannot be suctioned, please longly press
exit button to exit the disc by the strong hand.
★Detailed operation
When playing disc, if no operation within a certain time, both upper and lower menu will
disappear and it will be full screen display. Touch the screen, the menu will come out again.
This device has bluetooth and hand free function. If your mobile has bluetooth function, it can
set up point-to-point connection with this device. To make and receive calls as well as play
music are achieveable on the screen.
★ Pairing
Press Bluetooth icon in main interface to switch to bluetooth interface.
1.Click “Pairing” ,then “pairing” will come out
2.Whilst open the phone’s bluetooth device, and search for new pairing. When phone search
out the device bluetooth, that is the name of native bluetooth device, select this device and
connect it.
3.Input a password( default password 0000), the phone will Pair with the device automatically.
★ Bluetooth operation
Press ‘Dial’to enter bluetooth phone call interface, shown as below picture:
2. Pairing. Enter into bluetooth interface, then touch, “Phone Pairing” will come out. Whilst
open the phone’s bluetooth device, and search for new pairing. When phone search out the
device bluetooth, that is the name of native bluetooth device, select this device and connect it.
Input a password( default password 0000), the phone will pair with the device automatically.
3. Make a call
Enter the phone number by the number key-press in bluetooth interface. Click dialing key to
make a call. Or select the phone number from missed calls, received calls, dialed calls list
and then click dialing key to make a call.
4. Answer a call
When this device is on, if a call is in, the system will automatically switch to bluetooth and
hands free mode interface. If bluetooth setting of system menu is Auto Answer Mode, the
system will answer a call automatically. If setting is Manual Answer Mode, click dialing key to
answer a call. Click hang up key to end the call. While calling, users can click hang up key to
end the call.
5. Play phone’s music
★Operasi rinci
Ketika memainkan disc, jika ada operasi dalam kurun waktu tertentu, baik menu atas dan
bawah akan hilang dan, tampilan dilayar menjadi penuh. Jika ingin mengembalikan menu
dilayar, sentuh
layar tersebut dan menu akan keluar.
★Virtual Six CD Function:
After finished recording, put USB into USB Slot, even though it’s not the real CD/DVD/DB
driver, the Virtual Six CD can take recorded USB as CD driver, the same function of real
CD/DVD/DB driver.
★CD Recording processes:
Put the genuine CD into DVD slot, meanwhile, put USB into Mainframe slot.
Press CD Recording icon on main page.
Press red button, then begin to record.
After finishing recording, eject CD.
After ejecting CD, you can enjoy favorite music on Virtual Six CD on the base of having USB.
★Navi set
1.GPS navigation path setting.
2.Cick system setting, then click “
” to enter into navigation routing menu to select
correct routing, in order to run the map.Remarks: only when the correct navigation map
routing is selected, can you run theGPS navigation function.
3. Brake wire testing
Click to select it, you can test the hand brake wire during driving, this wire is to avoid the
driver to watch dvd during driving, which is hazardous, and it can cause severe injury.
★Time setting
It includes time setting and date setting, the user can select either 12 hour or24 hour system.
Click it and input the digit,then click “OK”.
★ Sound setting
Here the user can adjust tweeter, woofer, front, rear, left, right channel, EQ setting(cinema,
user,classic,popular,rocl, etc.), and Loud on
★ Backlight setting
Click the”backlight” icon to adjust the backlight, bright screen in the night might hinder the
(Remarks: you can reset to the default value, it is 100%).
★Language setting
Click to select the language. The system is built-in multi-languages: Chinese, English,
Portugese, Franch, Spanish,Deutsch,Russian,japanese.
★Option setting
User can select”Beep” and “Break detect”
★Background setting
The user can can select the backgroud images,then clike the”OK” .
★Steering wheel control setting
Learn the buttons between steering wheel and dvd unit one by one, then you can control dvd
unit through steering wheel button.
★Car Logo
Here the user select the car logo according to your car brand.
★Standby setting
The uer can set off-screen time here,: 3 minutes; 5 minutes; 10 minutes; standby sofor now. It
will be on all the time if setting is cancelled.
★Radio setting
The user can select the radio area:Europe,Russia,N.ANERICA,S.ANERICA,JAPAN
★System info.
Here the user can get the software version no, adjust the touch panel, reset to factory setting.
User friendly
★Visual parking system
When back-up the car, switch to the reverse
gear, the dvd unit will automatically switch to
Camera input mode; if a car camera already
installed on the back, the screen will show the
picture from the camera to help you reverse the
★ Hand brake testing
Connect hand brake wire between dvd unit and car hand brake to activate parking testing
function, then it will show video signal on the dvd screen only when the car is parked. If the
passenger wants to watch dvd during driving, you can turn off this hand brake testing function,
however it is not suggested to do so.
★Car headlight testing
Connect lamp wire to car headlight wire, when turning on car headlight, the screen brightness
will be automatically reduced.
★Off-screen function
Driving in the evening, for safety purpose, short press TUNE button to turn off the screen,
while the dvd unit still keeps working and you can listen to the audio; press TUNE again or
click the touch screen to turn on the screen again.
Remarks: there are some models which have no TUNE button, the user can enter into
backlight setting to adjust it.
★Telephone mute
Connect telephone mute wire to car telephone signal wire, the dvd unit will be mute when the
call comes in.
Remote control
1.Service life of the battery is about 6 months under normal
conditions.If the remote control cannot be operated
normally,battery shall be replaced in time.
2.If the remote control is out of service for a long time,the battey
shall be taken out to prevent liquid leakage that can damage the
remote controller.
3.Avoid dropping the remote controll to prevent damage.
4.Do not dismantle and cushion the battery,or put battery into fire
or place with other metal articles.
5.Place the battery of remote controller in a safe place to prevent
the children from swallowing the battery.If the child swallows the
battery by accident,please bring him/her to see the doctor
Key name
Power switch on/off key
Key for ejecting/suctioning disc
Switch mode
Key for opening and closing screen
Screen angle adjustment
Under disc mode,select previous/next section;under
mode,select privous/next saved radio station
Increase/decrease volume
Enter peimary interface of the system
Mute key
Select AM/FM bands,stop play under other modes
Under DVD mode,key for image zoom
Under DVD mode,key for entering primary menu of the disc
Numeric key
Under VCD mode,key for entering PBC menu
Enter system setting menu
Search and play
Under other modes,key for switching audio sound tracks
Under DVD mode,key for switching audio sound tracks
Repeat key
Not operating
No or low sound
Remote control
doesn’t work
Inferior quality of
sound; Distortion
of sound
Fuse of machine power supply and
auto vehicle battery is burnt;
Voltage of power supply is
Automatic protection system avoids
fault due to illegal operation
Volume setting is low volume;
Loudspeaker fault
Big deviation of volume balance
Earthing in loudspeaker conection
Battery is out of power;
Battery is not placed correctly
Inferior disc is prohibited;
Loudspeaker does not match
impedance of the machine
Speaker fault
Machine reset by
itself when it is
shut down
No image
Connection of ACC and B+ is not
Unstable output
of image
DVD does not correspond with the
present system video setting;
Video signal line is not connected
Incorrect ratio settings of icons
Image stretching
or compressing
Weak signal
Connection of brake wire is not
Not braking state.
during playing
Auto antenna does not reach out
LOC function is under working state.
Adverse antenna grounding;antenna
is broken
Disc is stained or scratched;
Documents or records are damaged.
Not into the disc
The disc is available in the machine.
Disc does not
Disc is scratched;
Disc is put in the opposite side;
Laser head is stained
PBC function is under working state.
No repeat and
search function
when VCD is
Change for fuse of the
correct types;
Adjust voltage;
Reset the system by
pressing the Reset key
Check the connection;
increase volume
Adjust the volume balance
setting to middle place;
Keep insulation of
loudspeaker connection
Change new battery;
Reinstall battery;
Use genuine discs;
Change a matched
Check the connection of
Check and reconnect ACC
and B+
Check brake wire and
connect them corerectly;
Keep braking state after the
car is placed safely.
Adjust systerm video setting;
Check and replace video
signal line.
Use correct ratio settings of
Connect auto antenna line
Close LCC function
Clean or replace the disc;
Replace the disc or choose
stored file.
Eject the disc and put into a
new one.
Change a good disc; put the
disc up into the laser and
then wash the disc and laser.
Close PBC function
System parameter
Rated voltage: DC12V (DC9.0 V~DC 16V allowed)
Grounding system: Negative polarity
Maximum current: 10A
Maximum output power: 50W*4
Load impedance: 4Ω
Bass: ±7dB(100Hz)
Treble: ±7dB(10kHz)
DVD player:
ESP: DVD---4seconds, VCD---10seconds
SNR: 85dB(A)
Frequency characteristic: 20~20,000Hz
RCA Audio output: 1.8V max (adjustable)
RCA Vedio output: 1V p-p
Electric antenna control: 12V (500mA)
Frequency range: 87.5~108MHz
Effective sensitivity: 10dB
SNR: 60dB
THD: ﹤1%(1KHz)
Frequency response: 30-15, 000Hz
Stereo crosstalk: 35dB(1KHz)
Frequency range: 522-1620MHz
Effective sensitivity: 30dB
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF