Sonic Jet pdf

Sonic Jet pdf
Connecting Pegs
Please read this manual before you begin!
Failure to follow this manual’s instructions may
result in damage to the Triangle Power Base, AC
Adapter and/or Laser Pegs®. Not adhering to
these instructions will void the manufacturer’s
warranty. The packaging must be kept because
it contains important information.
1000
For Boys And Girls
Ages 5 And Up
30 Models+
WARNING:
ANY CREATION YOU CAN BUILD
CHOKING HAZARD-Small parts.
LIGHTED
Not for children under 3 yrs.
Do not submerge in water.
CONSTRUCTION SET INCLUDES:
• 38 Laser Pegs®
• 159 Construction parts
• Laser Pegs® Peg Cord
• Triangle Power Base
• Instruction Manual
SONIC JET
To construct with Laser Pegs®, slide two pieces together to form a
connection. Slide each piece on and off smoothly. To build away from the
Triangle Power Base, use the Peg Cord in one of the top three peg holes to
light up your model! The 90° Pegs are essential to construction but they DO
NOT LIGHT UP.
Push button to
turn on/off
Push Red Power Button to
cycle through 3 different
light settings
OFF/ON/FLASH/FLASH FASTER.
Construction Compatible
Requires 3-AA Batteries
Compatible with other construction kits
Batteries NOT
Included
EN71, RoHS COMPLIANT
SONIC JET - The first official breaking of the sound barrier was in 1947, but there are several other
claims dating back to World War II.
Red
Button Power
STEP
4
Model
Difficulty
Level
Peg Holes
AC Adapter
Connection
Connect Laser Pegs® TRIANGLE POWER BASE
This product complies to
all safety requirements
of ASTM F 963
A
Connect cord to model.
B
MODEL INSTRUCTIONS
All additional model instructions can
be downloaded at www.LaserPegs.com
Laser Pegs® Parts List
x3
To build away from the Laser Pegs®
Triangle Power Base use the Peg
Cord in one of the top three holes to
illuminate your model!
x4
There is No LED In The 90 Degree Peg
When you remove a peg from another
peg or model DO NOT PULL ON CORD!
STEP
1
Replacing Batteries
Y PEG
x8
x7
SQUARE
PEG
x2
x4
90° PEG
45° PEG
SQUARE
M-M PEG
STRAIGHT
T-PEG
x6
x4
STACKABLE
WHEEL PEG
Each Laser Peg® is color coded on the circuit board inside
each shape. There is No LED In The 90 Degree Peg.
Color
Code
Laser Pegs® Stackable
Laser Pegs® link that
allows you to connect to
other construction kits.
Triangle Power
Base
Laser Pegs®
Peg Cord
Construction Parts List
x6
x7
x20
x10
x5
x7
x2
x4
x10
*To avoid short-circuits, keep metal objects and
other unauthorized materials from obstructing
the peg holes.
x14
x16
x4
x2
x2
x2
x8
x10
x2
x6
x4
x2
www.LaserPegs.com
Using an
AC Adapter
Remove all batteries
from Laser Pegs® Power
Base before using the
5-volt AC adapter.
x4
x2
1. Remove the three (3) screws.
2. Place three (3) AA batteries in the correct
position - as displayed inside the Triangle Power Base. (Batteries are to be inserted
with the correct polarity.)
3. Reassemble the Triangle Power Base.
4. Replace the three (3) screws.
5. Push RED Power Button to turn on!
6. Do not mix old and new batteries.
7. Do not mix alkaline, standard (carbonzinc), or rechargeable (nickel-cadmium,
NiMH) batteries!
8. Exhausted batteries are to be removed
from the Triangle Power Base.
9. Never connect more than 200 Laser Pegs®
10. Non-rechargeable batteries are not to be recharged.
11. Rechargeable batteries are only to be recharged under adult supervision.
12. Rechargeable batteries are to be removed
from the toy before being recharged.
13. The supply terminals are not to be shortcircuited.
x5
x5
This manual is copyright and cannot be reproduced or used online without Laser
Pegs®Ventures LLC permission. Copyright 2013 © All Rights Reserved US Patent
#7,731,558 Additional Global & Multiple Patents Pending. Laser Pegs®Ventures
LLC. 8304 Consumer Ct Sarasota FL. 34240. Contact: Support@LaserPegs.com
Add 3-AA Batteries
STEP
5
3-AA Batteries
STEP
2
Remove LR-44 Batteries
The LR-44 batteries are only for the
“Try-Me” function, they should be removed from the Triangle Power Base
and replaced with 3 - “AA” batteries
before giving it to the child.
When using an AC
Adapter, NEVER
place the Adapter
plug into the Triangle Power Base
top peg holes.
Never connect more than 200
Laser Pegs® when using a 5-volt
(2000mA) AC Adapter.
STEP
3
STEP
6
The AC Adapter and the Triangle Power Base are to be regularly examined for
damage to the cord, plug, enclosure and other parts, and in the event of such
damage, they must not be used until the damage has been repaired.
WARNING! Each Laser Peg® draws current from the batteries. Therefore, the more
pegs you use, the quicker you will deplete your battery power! As the power
weakens, the current will slowly fail and some Laser Pegs® will light up (typically
the reds and yellows) and some won’t. When the Laser Pegs® dim, the Laser Pegs®
are not broken, they just need stronger batteries or an AC Adapter.
You have 3 simple options...
1. Use a 5-volt AC Adapter –available from www.LaserPegs.com
2. Change the batteries.
3. Use high quality batteries. They will last a little longer, but they will still deplete rapidly the more laser pegs you connect!
www.LaserPegs.com
Copyright 2013© All Rights Reserved Global & Multiple Patents Pending.
US Patent #7,731,558
C
STEP
7
STEP
13
STEP
11
STEP
STEP
8
14
STEP
STEP
15
9
STEP
10
STEP
STEP
12
16
www.LaserPegs.com
Copyright 2013© All Rights Reserved Global & Multiple Patents Pending.
US Patent #7,731,558
STEP
STEP
STEP
17
21
25
ATTACH MODEL TO THE
TRIANGLE POWER BASE
STEP
STEP
18
22
STEP
STEP
23
19
STEP
20
COMBINE A
COMBINE B
STEP
26
STEP
24
www.LaserPegs.com
Copyright 2013© All Rights Reserved Global & Multiple Patents Pending.
US Patent #7,731,558
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising