Air/Oxygen Blender Brochure

Air/Oxygen Blender Brochure
An extensive
ex
x
line
of bl
blenders
le
with
unique
uniq
qu features
Ohio Medical’s Medical Air/O2 blenders combine compressed Medical Air and Oxygen
to deliver blended pressurized gas at a precise oxygen concentration (FiO2) determined
by the user.
DESCRIPTIONS
AND
APPLICATIONS
Some models are equipped with a unique gas bleed ON/OFF switch to increase accuracy
when needed, conserve gas and reduce worries.
We offer models with multiple outlet ports that deliver the same highly accurate
selected FiO2. Most models can be customized to include a flowmeter attachment with
a variety of flow rates available. The blenders contain an audible alarm which warns the
user if either of the gas sources changes by more than 20 psi from the other.
These blenders are suitable for respiratory applications including routine therapy,
ventilator gas supply, sophisticated life-support and critically-limited NICU procedures.
Did You Know...
All
A Medical Air and Oxygen
blen
blenders
require a bleed for
accuracy. The bleed on a blender
is activated any time something is
connected to the right port.
This means that gas is constantly
being bled into the air even when
the blender is not in use.
The NEO2 Blend offers an impressive and economical feature - the unique Bleed Switch. Unlike most other
blenders, the NEO2 Blend allows you to turn off the low flow gas bleed without disconnecting anything from
the blender. The blender is always ready to use when you need it.
This NEO2 Blend was specifically designed for use in the Neonatal Intensive Care Unit; it comes with two assembled
flowmeters. The built-in left side Flowmeter flows from 1-15 lpm, while the right side Flowmeter flows from 0.1-1 lpm.
These built-in Flowmeters allow for a smaller footprint in the NICU where space is very limited.
The NEO2 Blend conserves gas when the blender is not in use. The right flowmeter is part of the switch. When not in
use, rotate the flowmeter forward 45º to turn off the bleed. Rotate the flowmeter back to vertical to turn the bleed back
on. The Bleed ON/OFF switch is both easy to do and clearly visible.
Our switch saves you time, gas and money.
You can easily tell if the
bleed is on or off from
accross the room.
Easily turn off gas bleed by
simply pushing in and rotating
the flowmeter on the right-hand
side of the blender.
Save time because there are never any
parts to disconnect.
Save money by restricting
g gas
g from
being bled into the air.
BLEED ON
BLEED OFF
Side view of NEO2 Blender
in OFF position
Ohio Medical makes a
b l e n d e r for your e v e r y n e e d !
LOW
FLOW BLENDERS
NEO2 Blend with
Unique Bleed Switch
Blender with
ON/OFF Knob
Standard Low Flow
6750-0018-907
6750-0019-907
6750-0020-907
Unique ON/OFF Bleed
switch blender with two
assembled Flowmeters
Blender equipped with
ON/OFF Bleed knob
Versatile 2 port blender
Perfect for NICU
and Newborn
Nursery or for a
flow of 30 lpm
or less. Increased
accuracy at even the
lowest flow range.
These blenders allow the ability to
choose the bleed flow for accuracy at
low flows or to turn off the bleed for
significant gas savings
HIGH/LOW
FLOW BLENDERS
Versatile dual
range blender. Ideal
for equipment
needing flows from
2 -120 lpm, yet also
capable of increased
accuracy even at a
low flow range.
•
JUST
THE
FACTS
•
•
•
•
•
High/Low with
Unique Bleed Switch
3 Ports
Standard
High/Low Flow
6750-0026-910
6750-0025-907
6750-0024-907
Unique ON/OFF Bleed
switch blender with one
assembled Flowmeter
High/Low Blender
with 3 Ports
Versatile blender with
right and bottom port
Configure the blender exactly how you need it by choosing exactly what
flowmeter type suits your needs
3 models offer gas savings ON/OFF bleed feature
Available in very low to high flow capability
Suited to specialty and general needs
Mounting solutions for all situations
All blenders are equipped with an audible alarm
www.ohiomedical.com
MOUNTING
BRACKETS
6600-0031-900
Bracket, Dovetail Rail
6600-0032-900
6700-0642-800
Bracket, Dovetail Rail
Fairfield Rail Bracket
6600-0044-500
6700-0645-800
Dovetail Rail Bracket
Wall Version
6600-0045-500
6700-0643-800
Dovetail Rail Bracket
Wall Version
Pole Mount Blender
Bracket
Pole Mount Blender Bracket
6700-0641-800
Vertical Wall Bracket
Other configurations available; please speak to your sales representative for details.
3ft Hose Kit
10ft Hose Kit
3’ Air and 3’ Oxygen supply hoses
10’ Air and 10’ Oxygen supply hoses
HOSE
KITS
DISS Hexnut:
DISS Handtight:
Ohmeda®:
Chemetron®:
Puritan Bennett®:
6700-4003-815
6700-4010-815
6700-4001-815
6700-4002-815
6700-4004-815
DISS Hexnut:
DISS Handtight:
Ohmeda:
Chemetron:
Puritan Bennett:
DESCRIPTION
6700-4008-815
6700-4011-815
6700-4005-815
6700-4007-815
6700-4009-815
PART NUMBER
NEO2 Blend with assembled 0-15 lpm and 0-1 lpm Flowmeters.
Also equipped with a unique on/off bleed switch
6750-0018-907
NEO2 Blend with assembled 0-15 lpm and 0-3.5 lpm Flowmeters.
Also equipped with a unique on/off bleed switch
6750-0018-919
NEO2 Blend with assembled 0-15 lpm and 0-15 lpm Flowmeters.
Also equipped with a unique on/off bleed switch
6750-0018-910
Low Flow Blender with on/off Bleed Knob (Left and Bottom Port)
ORDERING
MATRIX
Plain/No Flowmeters
6750-0019-907
Attached 0-1 lpm Flowmeter (left)
6750-0019-908
Attached 0-3.5 lpm Flowmeter (left)
6750-0019-909
Attached 0-15 lpm Flowmeter (left)
6750-0019-910
Low Flow Blender (Left and Right Port)
Plain/No Flowmeters
6750-0020-907
Empty (left)/ Attached 0-15 lpm (right) Flowmeter
6750-0020-910
Attached 0-15 lpm (left) / 0-1 lpm (right) Flowmeters
6750-0020-918
Attached 0-15 lpm (left)/ 0-3.5 lpm (right) Flowmeters
6750-0020-919
High/Low Blender (Right and Bottom Port)
Plain/No Flowmeters
6750-0024-907
Attached 0-15 lpm Flowmeter
6750-0024-910
High/Low Blender with 3 Ports
Plain/No Flowmeters
6750-0025-907
Empty (left)/ Attached 0-15 lpm (right) Flowmeter
6750-0025-910
High/Low Blender with an assembled 0-15 lpm Flowmeter and
unique on/off bleed switch
6750-0026-910
Specifications are nominal, subject to change without notice. International options are also available.
Note: Ohio Medical Air/O2 Blenders are compatible with Ethylene Oxide Gas (ETO) cold sterilization.
Attached Flowmeters are connected with DISS Handtight fittings.
Other configurations available; please speak to your sales representative for details.
© 2015 Ohio Medical Corporation. This document contains information that is proprietary and confidential to Ohio Medical Corporation. Use of this information is under license from Ohio Medical Corporation. Any use other than that authorized
by Ohio Medical Corporation is prohibited. Ohio Medical Corporation and the Ohio Medical logo are registered trademarks of Ohio Medical Corporation.Ohmeda is a registered trademark of GE Healthcare Finland Oy Corporation. Chemetron is
a registered trademarks of Allied Healthcare Products, Inc. Puritan Bennett is a registered trademark of Mallinckrodt Inc.
Ohio Medical Corporation
1111 Lakeside Drive. Gurnee, IL 60031-4099
1.866.549.6446 | www.ohiomedical.com
255462 06/15
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising