Operation Guide 5459/5460

Operation Guide 5459/5460
MA1607-EA
© 2016 CASIO COMPUTER CO., LTD.
Operation Guide 5459/5460
Contents
About This Manual
Basic Operations
General Guide
Using the Crown
Day Indicator Movement
Solar Charging
Using Mobile Link with a Mobile
Phone
Getting Ready
A Installing Applications
B Configuring Bluetooth settings
C Pairing the watch with a phone
Auto Time Adjustment
Configuring World Time Settings
Correcting Hand Alignment
Watch Settings
Setting the Time and Date
Configuring Dual Time Settings
Swapping the Home City Time and World Time
(Dual Time)
Hand Alignment Correction
Correcting Hand Alignment
Moving To Another Time Zone
Other Information
Summer Time Switching
Supported Phone Models
Specifications
Mobile Link Precautions
Copyrights and Registered Copyrights
Troubleshooting
Phone Finder
Configuring Watch Settings
Changing the Home City Summer Time Setting
Checking the Watch Charge Level
Connection
Connecting with a Phone
Disconnecting from a Phone
Using the Watch in a Medical Facility or
Aircraft
Unpairing
If you purchase another phone
Connecting a Different Watch to a Phone
1
Operation Guide 5459/5460
About This Manual
Basic Operations
This manual covers the operations of the
watch models described below. When there
are any differences between models,
separate explanations and illustrations will be
provided for each as required.
This section provides an overview of the watch
and its operations.
●
The module number and model name of
each watch is stamped on its back cover.
General Guide
Model without a Small 24-hour Hand
Module 5459 (Model Name: SHB-100)
①
Using the Crown
● Pulling Out and Pushing In the Crown
Before performing a crown operation, you
need to pull it out to the first or second click as
shown in the figure below. Do not pull the
crown with too much force.
First click
②
Does not have a small 24-hour hand.
③
Second click
30
⑤
Module 5460 (Model Name: SHB-200)
Normal timekeeping
30
④
⑥ ⑦ ⑧
Model with a Small 24-hour Hand
①
Has a small 24-hour hand.
②
Important!
30
④
●
30
⑤
Note
●
The illustrations included in this
operation guide have been created
to facilitate explanation. An
illustration may differ somewhat
from the item it represents.
⑨⑥ ⑦ ⑧
A Hour and minute hands
Indicate the current time in your Home City
zone.
B Day
Indicates the day in your Home City zone.
C A / P marks
When configuring the Dual Time setting, the
second hand will point to “A” for a.m. times,
and to “P” for p.m. times.
D Small hour and minute hands
Indicate the current time in your World Time
(Dual Time) City.
E Second hand
Indicates the current second in your Home
City zone.
F C mark
When the watch is connected with a phone,
the second hand points to “C”.
G F mark
When the watch is connected with a phone
that supports a phone finder function, the
second hand will point to “F”.
●
To prevent loss of water resistance
and/or damage due to impact, be
sure to push the crown in to its
normal position after you are
finished using it.
When pushing the crown back in,
take care not to apply too much
force.
● Fast Forward/Fast Reverse
After pulling out the crown, rotating it quickly
in succession in either direction will start a fast
forward or fast reverse operation. While a fast
forward or fast reverse hand operation is in
progress, quickly rotating the crown in
succession again will increase the speed even
further.
● Stopping Fast Forward/Fast Reverse
Rotate the crown in the direction opposite that
of the ongoing operation or press any button.
Note
●
If you do not perform any operation
for about three minutes after pulling
out the crown, crown operations will
automatically become disabled. If
that happens, push the crown back
in and then pull it out again.
H R mark
When the watch is standing by for connection
with a phone, the second hand points to “R”.
I Small 24-hour hand
Indicates the current time in your World Time
(Dual Time) City.
2
Operation Guide 5459/5460
Day Indicator Movement
Important!
●
30
Day indicator
The day indication changes each day
between 10:00 p.m. to 2:00 a.m. the next day.
●
The day may not be indicated correctly while
the watch’s crown is pulled out.
Solar Charging
This watch runs on power supplied from a
rechargeable (secondary) battery that is
charged by a solar panel. The solar panel is
integrated into the face of the watch, and
power is generated whenever the face is
exposed to light.
Depending on light intensity and
local conditions, the watch may
become hot to the touch when
exposed to light for charging. Take
care to avoid burn injury after
charging. Also, avoid charging the
watch under high-temperature
conditions like the ones described
below.
ー On the dashboard of a vehicle
parked in the sun
ー Near an incandescent light bulb or
other source of heat
ー Under direct sunlight or in other
hot areas for long periods
When you are not wearing the watch, put it in
a location where it is exposed to bright light.
The charge level is indicated by watch hand
movement. Functions become disabled as
battery power goes low.
●
Should battery go low or go dead,
expose the face (solar panel) to light
as soon as possible.
Note
●
While you are wearing the watch, make sure
that its face (solar panel) is not blocked from
the light by the sleeve of your clothing. Power
generation efficiency is reduced even when
the face of the watch is blocked only partially.
YES
NO
The second hand jumps at two-second
intervals.
30
Second hand
Dead Battery
All hands and the day indicator are stopped.
1
● Remaining Charge and Dead Battery
Important!
● Charging the Watch
Low Battery Power
Exposing the watch face to light after
the battery goes dead will cause the
second hand to revolve
counterclockwise until it stops at
second 57. This indicates charging
has started.
● Charging Time Guidelines
The table below shows guidelines for
approximate charging times.
Required Charging Time for 1-day Use
Light Intensity Approximate Charging Time
A
8 minutes
High
B
30 minutes
p
C
48 minutes
Low
D
8 hours
Time Required to Achieve Next Charge
Level
Approximate Charging Time
Light Intensity Charge Level Charge Level
1
2
A
3 hours
33 hours
High
B
8 hours
123 hours
p
C
12 hours
199 hours
Low
D
139 hours
Light Intensity
A Sunny day, outdoors (50,000 lux)
B Sunny day, near a window (10,000 lux)
C Overcast day, near a window (5,000 lux)
D Indoor fluorescent lighting (500 lux)
Charge Level 1:
Time from dead battery until hand movement
starts
Charge Level 2:
Time from hand movement starts until a full
charge
3
Operation Guide 5459/5460
Note
B Configuring Bluetooth settings
Enable the phone’s Bluetooth.
●
Actual charging time depends on the
local charging environment.
● iPhone Users
1. Y On the Home Screen, tap “Settings” n
“Bluetooth”.
● Power Saving
Leaving the watch in a dark location for
approximately one week will cause movement
all of the watch’s hands to stop in order to save
power.
●
Only the day indicator is operational.
2. Y Enable “Bluetooth”.
3. Y Tap “Settings” to return to the “Settings”
screen.
The watch can be set to adjust its time setting
automatically each day in accordance with the
phone time.
● Using Auto Adjust
Your watch adjusts its time setting four times
a day. It performs the adjustment operation
automatically as you go about your daily life,
without any operation required by you.
4. Y Tap in the following sequence: “Privacy”
11:00
n “Bluetooth Sharing”.
Recovering from Power Saving Operation
Press any button or place the watch in a welllit area to recover from power saving.
Auto Time Adjustment
5. Y Enable “CASIO WATCH+”.
● Android Users
Y Enable Bluetooth.
●
Using Mobile Link with
a Mobile Phone
While there is a Bluetooth connection
between the watch and phone, the watch time
setting is adjusted automatically in
accordance with the phone’s time setting.
Note
●
●
This function is available only while
CASIO WATCH+ is running on the
phone.
This section describes watch and
phone operations.
X : Watch operation
Y : Phone operation
If you are presented with a choice between
“Bluetooth” and “Bluetooth Smart”, select
“Bluetooth Smart”.
Important!
Note
●
For details about setting
procedures, see your phone
documentation.
C Pairing the watch with a phone
Before you can use the watch in combination
with a phone, you first need to pair them. Once
the watch is paired with a phone, you normally
do not need to pair them again.
close to (within one meter of) the watch.
WATCH+” icon.
A Installing Applications
To use the watch with a phone, first tap one of the
links below and install the “CASIO WATCH+” app
on the phone.
● AndroidTM (GALAXY, etc.) Users
https://play.google.com/store/apps/details?
id=com.casio.watchplus
Note
●
3. Y Tap “SHEEN”.
4. Y Perform operations as instructed by the
app.
●
●
● iOS (iPhone) Users
https://itunes.apple.com/us/app/
id760165998?ls=1&mt=8
The watch may not be able to
perform auto time setting
adjustment under the conditions
described below.
ー While it is too far away from its
paired phone
ー When communication is not
possible due to radio interference,
etc.
ー While the phone is updating its
system
1. Move the phone you want to pair with
2. Y On the Home Screen, tap the “CASIO
Getting Ready
●
●
The model name is stamped on the
back cover of the watch.
If a pairing prompt message appears,
perform the operation shown on the
phone screen.
●
If there is a World Time City specified
with CASIO WATCH+, its time will
also be adjusted automatically.
The watch will connect with the
phone and perform auto time
adjustment at around 5:00 a.m.,
11:00 a.m., 5:00 p.m. and 11:00 p.m.
The connection is automatically
terminated after auto time
adjustment is complete.
When pairing starts, the second hand
will move to 12 o’clock or to the “R”
mark. When pairing is complete, the
second hand will move to “C”.
C mark
4
Operation Guide 5459/5460
● Summer Time
Once the watch is connected with a phone and
its time is adjusted with the phone time, its
Home City time and World Time will
automatically switch between standard time
and summer time as required, even if the
watch is no longer connected with the phone.
l Summer Time Switching
●
●
Changing the time setting manually with a
watch operation will cancel auto standard
time/summer time switching.
Configuring World Time
Settings
Specifying a World Time City with CASIO
WATCH+ causes the city’s time to be
indicated by the small hour and minute hands.
Watch settings can be configured for auto
summer time switching for the World Time
City.
5. Perform the operation shown on the
phone screen. The World Time setting will
be reflected on the watch.
The small hour and minute hands of the
watch will indicate the current time in the
specified World Time City.
●
Model without a Small 24-hour Hand
World Time hour and minute
A CASIO WATCH+ screen shows
information about summer time periods.
● Triggering Immediate Time Adjustment
The watch will adjust its time setting to that of
the phone immediately after they are
connected with each other. Whenever you
want to adjust the watch’s time setting perform
the procedure below to connect with a phone.
●
If CASIO WATCH+ is already running, you
can skip step 1. In this case, advance to step
2 of this procedure.
30
30
Note
●
1. Y On the Home Screen, tap the “CASIO
WATCH+” icon.
CASIO WATCH+ World Time lets
you select from among
approximately 300 cities as the
World Time City.
●
Model with a Small 24-hour Hand
World Time hour (24-hour)
World Time hour and minute
2. X Press (B).
This causes the second hand to move to
“R”. The second hand will move to “C”
when a connection is established
between the watch and phone, and the
time setting of the watch will adjust to the
phone’s time setting.
●
The connection is terminated
automatically after time adjustment is
complete.
● Selecting a World Time City
1. Y Tap the “CASIO WATCH+” icon.
2. X Hold down the (B) button for about 1.5
seconds.
●
●
30
The second hand will move to “R”. Keep
(B) depressed until the second hand
starts moving again and then stop at
“R”.
The second hand will move to “C” when
a connection is established between
the watch and phone.
30
● Configuring the Summer Time Setting
1. Y Tap the “CASIO WATCH+” icon.
2. X Hold down the (B) button for about 1.5
seconds.
●
3. Y Tap “World Time”.
4. Y Specify a World Time City by inputting a
city name or by tapping its location on the
on-screen map.
●
The second hand will move to “R”. Keep
(B) depressed until the second hand
starts moving again and then stop at
“R”.
The second hand will move to “C” when
a connection is established between
the watch and phone.
5
Operation Guide 5459/5460
3. Y Tap “World Time”.
4. Y Specify a World Time City by inputting a
city name or by tapping its location on the
on-screen map.
If your currently specified World Time City
observes summer time, the summer time
period will appear on the display.
● Swapping Your World Time and Home
Time
1. Y Tap the “CASIO WATCH+” icon.
2. X Hold down the (B) button for about 1.5
seconds.
●
5. Y Select the summer time switching
method you want to use.
●
●
●
“Auto”
The watch switches between standard
time and summer time automatically.
“ON”
The watch always indicates summer
time.
phone screen.
Note
●
●
When “Auto” is selected for
standard/summer time switching,
the watch will switch between
standard time and summer time
automatically. Do not need to
change the time setting manually for
changes between summer time and
standard time. Even if you are in an
area that does not observe summer
time, you can leave the watch’s
summertime setting as “Auto”.
Changing the time setting manually
with a watch operation will cancel
auto standard time/summer time
switching.
A CASIO WATCH+ screen shows
information about summer time
periods.
If the hands are out of alignment even though
auto time adjustment is being performed, use
CASIO WATCH+ to adjust them.
1. Y Tap the “CASIO WATCH+” icon.
2. X Hold down the (B) button for about 1.5
seconds.
●
The second hand will move to “C” when
a connection is established between
the watch and phone.
●
“OFF”
The watch always indicates standard
time.
6. Perform the operation shown on the
●
●
The second hand will move to “R”. Keep
(B) depressed until the second hand
starts moving again and then stop at
“R”.
Correcting Hand Alignment
The second hand will move to “R”. Keep
(B) depressed until the second hand
starts moving again and then stop at
“R”.
The second hand will move to “C” when
a connection is established between
the watch and phone.
3. Y Tap y.
4. Perform the operation shown on the
phone screen to swap your Home Time
with your World Time.
3. Y Tap in the following sequence:
For example, if your Home City is Tokyo
and the World Time City is New York, they
will be swapped as shown below.
4. Y Tap “Adjusting the home positions”.
●
Model without a Small 24-hour Hand
Before swapping
Home City
(Tokyo)
●
Home City
(New York)
Home City (Tokyo)
phone screen.
Phone Finder
30
World Time City
(Tokyo)
Model with a Small 24-hour Hand
Before swapping
5. Y Perform the operation shown on the
After swapping
30
World Time City
(New York)
j n“Watch settings”.
You can use phone finder to trigger a tone on
the phone to make it easy to find. The tone is
forced to sound even if the phone is in the
manner mode.
Important!
●
After swapping
Home City (New York)
30
●
Do not use this function in areas
where phone call tones are
restricted.
The tone sounds at a high volume.
Do not use this function when
listening to phone output over
earphones.
30
1. X If the watch is connected with a phone,
World Time City
(New York)
World Time City (Tokyo)
press (B) to terminate the connection.
Connected
After disconnection
Note
●
Auto time adjustment is not
performed for 24 hours after
swapping of the Home Time and
World Time.
30
30
6
Operation Guide 5459/5460
2. X Hold down the (B) button for about three
seconds until the second hand points to
“F”.
This starts the phone finder operation.
The second hand will move to “C” when a
connection is established between the
watch and phone, and then the phone’s
ringtone will sound.
●
Checking the Watch Charge
Level
Changing the Home City
Summer Time Setting
1. Y On the Home Screen, tap the “CASIO
Use the procedure below to check the current
charge level with CASIO WATCH+.
2. X Hold down the (B) button for about 1.5
1. Y On the Home Screen, tap the “CASIO
WATCH+” icon.
WATCH+” icon.
seconds.
●
It will take a few seconds before the
phone tone sounds.
●
The second hand will move to “R”. Keep
(B) depressed until the second hand
starts moving again and then stop at
“R”.
2. X Hold down the (B) button for about 1.5
seconds.
●
The second hand will move to “C” when
a connection is established between
the watch and phone.
●
3. X Press any button to stop the tone.
●
You can press any watch button to stop
the phone tone only during the first 30
seconds after it starts to sound.
The second hand will move to “R”. Keep
(B) depressed until the second hand
starts moving again and then stop at
“R”.
The second hand will move to “C” when
a connection is established between
the watch and phone.
3. Y Tap in the following sequence:
j n“Watch settings”.
Configuring Watch Settings
You can use CASIO WATCH+ to specify the
amount of time until the Bluetooth connection
is automatically terminated, and to configure
other settings.
1. Y Tap the “CASIO WATCH+” icon.
4. Y Tap “Summer time setting for home
time”.
method you want to use.
●
●
seconds.
●
The second hand will move to “R”. Keep
(B) depressed until the second hand
starts moving again and then stop at
“R”.
The second hand will move to “C” when
a connection is established between
the watch and phone.
charge level.
5. Y Select the summer time switching
2. X Hold down the (B) button for about 1.5
●
3. Y Use CASIO WATCH+ to check the
●
“Auto”
The watch switches between standard
time and summer time automatically.
“OFF”
The watch always indicates standard
time.
“ON”
The watch always indicates summer
time.
6. Perform the operation shown on the
phone screen.
Connection
Connecting with a Phone
This section explains how to establish a
Bluetooth connection between a phone that is
paired with the watch. When a connection is
established, the watch will adjust its time
setting to that of the phone.
●
If the watch is not paired with the phone you
want to connect with, perform the procedure
under “C Pairing the watch with a phone” to
pair them.
1. Move the phone close to (within one meter
of) the watch.
2. X While the second hand is not pointing to
“C”, hold down the (B) button for about 1.5
seconds.
●
3. Y Tap in the following sequence:
j n“Watch settings”.
4. Y Select the setting you want to change
and then perform the operation shown on
the phone screen.
●
The second hand will move to “R”. Keep
(B) depressed until the second hand
starts moving again and then stop at
“R”.
The second hand will move to “C” when
a connection is established between
the watch and phone.
7
Operation Guide 5459/5460
Using the Watch in a Medical Facility
or Aircraft
Important!
●
If you have problems establishing a
connection, it could mean that
CASIO WATCH+ is not running on
the phone. On the phone’s home
screen, tap the “CASIO WATCH+”
icon. After the app starts up, hold
down the watch’s (B) button for
about 1.5 seconds.
Whenever you are in a hospital, on an aircraft,
or in any other location where auto time
adjustment may cause problems, you can
perform the procedure below to disable it.
Perform the same procedure again to reenable auto time adjustment.
1. Y On the Home Screen, tap the “CASIO
WATCH+” icon.
●
●
If you are unable to re-pair the watch
with a phone after unpairing them,
use the procedure below to delete
pairing information from the watch
and then perform the pairing
operation again.
A X Pull out the crown to the second
click.
2. X Hold down the (B) button for about 1.5
Note
●
Note
seconds.
The connection will be terminated if
you do not perform any operation on
the watch or phone for a fixed
amount of time.
To specify the connection limit time,
perform the following operation with
CASIO WATCH+: “Watch
settings”n“Set the time for
connecting to this app”. Next, select
a setting of 3 minutes, 5 minutes, or
10 minutes.
30
The second hand will move to “C” when a
connection is established between the
watch and phone.
●
The second hand will move to “R”. Keep
(B) depressed until the second hand
starts moving again and then stop at
“R”.
While the watch is connected with
the phone, the second hand makes
one revolution with each passing
minute.
Connected
After disconnection
30
The second hand will move to 12
o’clock. Keep (B) depressed until the
second hand moves to 12 o’clock.
This deletes pairing information from
the watch.
You need to perform the operation below
whenever you want to establish a Bluetooth
connection with a phone that is different from
the one you are currently connected with.
4. Y Tap “Time adjustment”.
5. Perform the operation shown on the
1. Unpair the watch from your current (old)
phone screen.
phone.
l Unpairing
Unpairing
30
seconds.
If you purchase another phone
j n“Watch settings”.
Pressing (B) terminates the Bluetooth
connection and returns the second hand to its
normal operation.
B X Hold down (B) for about five
C X Push the crown back in.
3. Y Tap in the following sequence:
Disconnecting from a Phone
Crown
1. X If the watch is connected with a phone,
press (B) to terminate the connection.
Connected
2. Pair the watch with your new phone.
l C Pairing the watch with a phone
After disconnection
30
30
2. Y On the Home Screen, tap the “CASIO
WATCH+” icon.
3. Y Tap the CASIO WATCH+ j icon.
4. Y In the “Previously registered watch” list,
tap the watch you want to unpair.
5. Y Tap “Delete pairing registration”.
6. Y Tap “Delete”.
This unpairs the watch from the phone.
8
Operation Guide 5459/5460
Connecting a Different Watch to a
Phone
You should perform the steps below before
pairing a different watch with the phone, such
as after you buy a new watch.
● Pairing the Watch with a Phone
1. Y On the Home Screen, tap the “CASIO
WATCH+” icon.
2. Y In the upper left corner of the screen, tap
x.
3. Y On the list that appears, tap the brand of
the phone you want to connect with.
4. Y Perform operations as instructed by the
app.
●
The model name is stamped on the
back cover of the watch.
Watch Settings
Use the procedure below to configure your
Home City (current location) time and your
Dual Time settings manually.
6. Rotate the crown to change the month
setting.
11
12
1
10
9
Setting the Time and Date
While the watch is connected to a phone, it will
automatically adjust its day and time settings
to those of the phone. If the watch is not
connected to a phone, use the procedure
below to adjust its day and time settings.
1. Pull out the crown to the second click.
This causes the second hand to move to
12 o’clock, and enables the minute setting
operation.
Minutes
2
3
4
8
7
6
5
Month
7. Press (A).
This enables the year 10’s digit setting
operation.
8. Rotate the crown to change the year 10’s
digit.
Year (10’s digit) 00
10
● Connecting with a Watch that is Already
20
Paired
90
1. Y On the Home Screen, tap the “CASIO
2. Y Swipe the screen to scroll through
3. X Perform watch operations in
2. Rotate the crown to change the minute
setting.
●
accordance with the instructions that
appear on the phone screen.
Important!
●
A phone can be connected with only
one watch at a time. To connect to
another watch, you need to
terminate the current connection.
40
80
Crown
WATCH+” icon.
available watches and display the one you
want to connect with.
30
30
The Dual Time setting is also adjusted
in accordance with the current time
setting.
70
60
9. Press (A).
This enables the year one’s digit setting
operation.
10. Rotate the crown to change the year one’s
digit.
3. Press (A).
0
This enables the time and day setting
operation.
4. Rotate the crown to change the time and
day settings.
●
50
1
2
9
3
4
8
Check the a.m./p.m. setting whenever
there is a change to another day.
7
6
5
Year (one’s digit)
Hours
11. On a time signal at the top of a minute,
push the crown back in.
30
Crown
Day indicator
5. Press (A).
This enables the month setting operation.
9
Operation Guide 5459/5460
Configuring Dual Time
Settings
●
Dual Time lets you keep track of the current
time in another time zone in addition to your
Home City zone.
●
If your watch has a small 24-hour hand,
you can find out whether the Dual Time
is showing an a.m. or p.m. time by
checking the position of the hand.
PM
Model without a Small 24-hour Hand
AM
Dual Time
+15
minutes
Second hand
-15
minutes
Small 24-hour hand Crown
Dual Time 24-hour
Dual Time
1. Pull out the crown to the first click.
2. Hold down (A) for about five seconds.
This enables adjustment of second and
minute hand alignment.
Second hand
You can swap your Home City with the Dual
Time by holding down (A) for about three
seconds.
●
Minute hand
30
3. Rotate the crown to align the second and
minute hands with 12 o’clock.
●
Model without a Small 24-hour Hand
Before swapping
After swapping
The minute hand of this watch moves in
conjunction with second hand
movement.
4. Press (A).
Home City
This enables adjustment of hour hand
alignment.
30
30
1. Pull out the crown to the first click.
2. Rotate the crown to change the Dual Time
setting.
●
Correcting Hand Alignment
Swapping the Home City
Time and World Time (Dual
Time)
Model with a Small 24-hour Hand
●
Strong magnetism or impact can cause the
time indicated by the hands and the day
indicator to go out of alignment. If this
happens, adjust hand and day indicator
alignment.
3. Push the crown back in.
30
●
Hand Alignment
Correction
You can set the Dual Time in 15-minute
increments.
30
Dual Time city
●
●
If the hand position is more than three
hours out of alignment, you will not be
able to use step 5 to correct it. If this is
the case, skip step 5 and go to step 6.
Next day
Model with a Small 24-hour Hand
Before swapping
After swapping
Today’s date
1
31
Home City
If your watch does not have a small 24hour hand, you can find out whether the
Dual Time is showing an a.m. or p.m.
time by checking the position of the
second hand.
Hour hand
30
1
31
30
5. Rotate the crown to align the hour hand
PM
Dual Time city
with 12 o’clock.
+15
minutes
AM
-15
minutes
Second hand
Crown
Note
●
If the current times were set
manually on the watch (not
automatically by the phone), the
dates will not be swapped. Only the
times are swapped.
10
Operation Guide 5459/5460
6. Press (A).
●
If your watch does not have a small 24hour hand, this enables adjustment of
the small hour and minute hands.
Small hour hand
Moving To Another
Time Zone
Use the procedure below to easily change day
and time settings of the watch to a destination
location.
1. Configure the World Time (Dual Time) to
the current time at your destination.
Current time
If your watch has a small 24-hour hand,
this enables adjustment of the small
hour and minute hands, and the small
24-hour hand.
Auto:
After the watch is connected with a phone,
summer time is displayed for the current
location time or World Time when it is within
the summer time period. Otherwise standard
time is displayed.
30
Small hour hand
Destination time
1
31
l Configuring World Time Settings
l Configuring Dual Time Settings
ON:
The watch always displays summer time.
2. Disable auto time adjustment.
l Using the Watch in a Medical Facility or
Aircraft
Small minute hand
Small 24-hour hand
7. Rotate the crown to align the small hour
and minute hands with 12 o’clock.
●
If your watch has a small 24-hour hand,
also align it with 12 o’clock (24).
8. Hold down (A) for about two seconds.
● After Arriving
destination time zone time.
●
Model without a Small 24-hour Hand
Before swapping
After swapping
Home City
30
30
The watch always displays standard time.
When the watch is connected to a phone, it is
sent summer time period information for your
Home City. If there is a World Time City
specified with CASIO WATCH+, information
for that city will also be sent. If the CASIO
WATCH+ summer time setting is “Auto”, the
watch will automatically keep track of the
summer time period and perform summer time
switching automatically, even if it is not
connected with the phone.
Supported Phone Models
Destination time
●
OFF:
● Auto Summer Time Switching
1. Swap the origin time zone time with the
This enables adjustment of day indicator
alignment. If the hour hand was
misaligned by more than three hours in
step 4, you can also correct hour hand
alignment here.
1
31
● Connecting with a Phone to Switch
After the watch is connected with a phone,
summer time switching of Home City time and
World Time is performed in accordance with
the CASIO WATCH+ setting (Auto/ON/OFF)
as described below.
Small minute hand
●
This section provides non-operational
information you also need to know. Refer to
this information as required.
Summer Time Switching
● Before Boarding
1
31
Other Information
For information about supported phone
models, visit the CASIO Website.
Model with a Small 24-hour Hand
Before swapping
1
31
After swapping
http://world.casio.com/os_mobile/wat/
Home City
Day indicator
30
30
9. Rotate the crown to center the day
indicator between “1” and “31”, and the
hour hand with 12 o’clock.
●
Note that date indicator and hour hand
movement are linked with each other.
10. Push the crown back in.
Destination time
l Swapping the Home City Time and
World Time (Dual Time)
2. Enable auto time adjustment.
l Using the Watch in a Medical Facility or
Aircraft
11
Operation Guide 5459/5460
Mobile Link Precautions
Specifications
Accuracy at normal temperature:
±15 seconds a month
● Legal Precautions
●
Timekeeping:
Hour, minute, second, day (2000 to 2099
full auto calendar)
Dual Time:
Hour and minute; Model equipped with 24hour timekeeping (small 24-hour hand)
only; Swapping with Home Time
Mobile Link:
Auto Time Adjustment
Auto time adjustment at regularly
scheduled times.
Phone Finder
Watch operation sounds the alert of the
mobile phone.
Auto Summer Time Switching
Automatic switching between standard
time and summer time.
Hand position correction
Data Communication Specifications
Bluetooth® SMART
Communication range: 2 meters max.
(depends on environment)
●
This watch complies with or has received
approval under the radio laws of various
countries and geographical areas. Using
this watch in an area where it does not
comply with or has not received approval
under applicable radio laws may be a
criminal offense. For details, visit the CASIO
Website.
http://world.casio.com/ce/BLE/
Use of this watch inside of aircraft is
restricted under the aviation laws of each
country. Be sure to follow the instructions of
airline personnel.
● Precautions when using Mobile Link
●
●
Other:
Power Saving, Low Battery Alert
Power Supply:
Solar panel and one rechargeable battery
Approximate Battery Life:
7 months
Conditions
Auto Time Adjustment: 4 times/day
Copyrights and Registered
Copyrights
●
When using this watch in combination with
a phone, keep the watch and phone close
to each other. A range of two meters is
recommended as a guideline, but the local
environment (walls, furniture, etc.), the
structure of a building, and other factors may
require a much closer range.
●
●
●
●
●
●
Bluetooth® is a registered trademark of
Bluetooth SIG, Inc.
iPhone and App Store are registered
trademarks of Apple Inc. in the United
States and other countries.
iOS is a trademark or registered trademark
of Cisco Systems, Inc.
GALAXY, GALAXY Note, and GALAXY S
are registered trademarks of Samsung
Electronics Co., Ltd.
Android and Google PlayTM are registered
trademarks of Google Inc.
Other company names and product names
used herein are trademarks or registered
trademarks of their respective companies.
This watch can be affected by other devices
(electrical devices, audio-visual equipment,
office equipment, etc.) In particular, it can be
affected by operation of a microwave oven.
The watch may not be able to communicate
normally with a phone if a microwave oven
is operating nearby. Conversely, this watch
may cause noise in radio reception and the
video image of a TV.
Bluetooth of this watch uses the same
frequency band (2.4 GHz) as wireless LAN
devices, and use of such devices in close
proximity of this watch may result in radio
interference, slower communication speeds
and noise for the watch and the wireless
LAN device, or even communication failure.
● Stopping Radio Wave Emission by This
Watch
The watch is emitting radio waves whenever
the second hand is pointing to “C” (Bluetooth
connected) or “R” (Bluetooth connection
standby). Even if the second hand is not
pointing at “C” or “R”, the watch will attempt to
connect with a phone four times a day to adjust
its time settings.
When in a hospital, on an aircraft, or in any
other area where the use of radio waves is not
allowed, use CASIO WATCH+ to disable
syncing between the watch and phone.
For details, see “Using the Watch in a Medical
Facility or Aircraft”.
12
Operation Guide 5459/5460
Troubleshooting
I can’t pair the watch with a
phone.
Q1 I’ve never been able to establish a
(pairing) connection between the
watch and phone.
Are you using a supported phone model?
Check if the phone model and its
operating system are supported by the
watch.
For information about supported phone
models, visit the CASIO Website.
http://world.casio.com/os_mobile/wat/
Is CASIO WATCH+ installed on your
phone?
The CASIO WATCH+ needs to be
installed in order to connect with the
watch.
l A Installing Applications
Q2 I can’t establish a connection
(pairing) between the watch and a
newly purchased phone.
To connect with a newly purchased phone,
you will need to perform the pairing operation
again with the new phone. Use CASIO
WATCH+ to delete the pairing information
from your current (old) phone, and then pair
the watch with the new phone.
l If you purchase another phone
Q2 The phone is in the Airplane Mode.
Connection with the watch is not possible while
the phone is in the Airplane Mode. After exiting
the phone’s Airplane Mode, go to its Home
Screen and tap the “CASIO WATCH+” icon.
Then on the watch, hold down the CONNECT
button (B) for about 1.5 seconds.
30
I can’t reconnect the watch
and phone.
Q1 The watch will not re-connect with the
phone after they are disconnected.
Is CASIO WATCH+ running on your
phone?
Check if CASIO WATCH+ is running on
the phone. On the phone’s Home Screen,
tap the CASIO WATCH+ icon. Then on
the watch, hold down the CONNECT
button (B) for about 1.5 seconds.
Q3 I changed the phone’s Bluetooth
from enabled to disabled, and now I
can’t connect anymore.
On the phone, disable and then re-enable
Bluetooth, and then go to the Home Screen
and tap the “CASIO WATCH+” icon. Next, on
the watch, hold down the CONNECT button
(B) for about 1.5 seconds.
30
Are your phone’s Bluetooth settings
configured correctly?
Configure the phone’s Bluetooth settings.
For details about setting procedures, see
your phone documentation.
Q4 I can’t connect after turning off the
phone.
iPhone Users
●
“Settings”n“Bluetooth”n On
●
“Settings” n “Privacy” n “Bluetooth
Sharing” n “CASIO WATCH+” n On
Android Users
●
Enable Bluetooth.
Have you tried turning your phone off and
then back on again?
Turn on the phone and tap the CASIO WATCH+
icon. Then on the watch, hold down the
CONNECT button (B) for about 1.5 seconds.
Turn the phone off and then back on, and
then tap the CASIO WATCH+ icon. Next,
on the watch, hold down the CONNECT
button (B) for about 1.5 seconds.
Other than the above.
Some phones need to have BT Smart
disabled to use CASIO WATCH+. For
details about setting procedures, see your
phone documentation.
On the Home Screen, tap: “Menu” n
“Settings” n “Bluetooth” n “Menu” n “BT
Smart settings” n “Disable”.
13
Operation Guide 5459/5460
Phone-Watch Connection
Phone Finder
Auto Time Adjustment
Q1 I can’t establish a connection
Q1 Phone Finder does not work.
Q1 When does the watch sync its time
between the phone and watch.
Have you tried turning your phone off and
then back on again?
Turn the phone off and then back on, and
then tap the CASIO WATCH+ icon. Next,
on the watch, hold down the CONNECT
button (B) for about 1.5 seconds.
Are the phone and watch disconnected?
Phone Finder does not work during
Bluetooth connection.
Is CASIO WATCH+ running on your
phone?
Phone Finder will not work unless CASIO
WATCH+ is running. On the Home
Screen, tap the CASIO WATCH+ icon.
Other than the above.
Has the watch been re-paired with the
phone?
After unpairing the watch and phone, repair them again.
l If you purchase another phone
If you are unable to establish a
connection...
Delete the pairing information from the
watch, and then re-pair the watch and
phone.
l See "Unpairing".
Changing to a Different
Phone Model
Q1 Connecting the current watch to
another phone.
Clear pairing information from the watch you
are currently using, and then pair with another
phone.
l If you purchase another phone
If the phone does not respond after a few
seconds, it could mean that the phone is
located too far from the watch. Change to
a different location and try again.
Q2 It takes some time before the phone
responds.
The phone will emit a tone when a connection
is established with the watch, which takes a
few seconds.
Q3 The phone cannot be found even
when it is close to the watch.
Since communication is performed using
radio waves, the watch may not be able to find
the phone even if it is within two meters.
Certain environments may make the
allowable communication range very short.
setting with the phone?
The watch will connect with the phone and
perform auto time adjustment at around 5:00
a.m., 11:00 a.m., 5:00 p.m. and 11:00 p.m.
The connection is automatically terminated
after auto time adjustment is complete.
Q2 The watch time setting is not
adjusted when an auto adjustment
time is reached.
Is auto time adjustment late relative to a
scheduled time?
Note that auto time adjustment is not
performed for 24 hours after swapping of
the Home Time and World Time, or after
the time setting is adjusted manually on
the watch. Auto time adjustment will
resume 24 hours after either of the above
operations is performed.
Is auto time adjustment enabled?
Auto time adjustment will not be
performed at the scheduled times unless
it is enabled. Establish a connection
between the watch and phone, and then
use CASIO WATCH+ to enable auto time
adjustment.
l Using the Watch in a Medical Facility or
Aircraft
Q3 Time is not displayed correctly.
The phone’s time setting may not be correct.
A Correct the phone’s time setting.
iPhone Users
●
“Settings” n “Privacy” n Turn on
“Location Services” n “System
Services” n Turn on “Setting Time
Zone”.
Android Users
●
Refer to your phone’s user
documentation.
B Establish a connection between the watch
and phone, and correct the time setting.
l Auto Time Adjustment
14
Operation Guide 5459/5460
World Time
Q1 The time for a World Time City is not
correct.
The summer time start date and time, end date
and time, or other rules were changed by
authorities.
Q5 Hands are stopped and buttons do
not work.
The watch is in the charge recovery mode.
Wait until the recovery process is complete
(for about 15 minutes). The watch will recover
more quickly if you place it in a brightly lit
location.
Q6 Hands and the day indicator are out
Hand Movement and
Indications
Q1 Why can’t I perform any button
operations while high-speed hand
movement is in progress?
Button operations are disabled while highspeed hand movement is in progress after a
watch setting is changed, etc. Wait until the
hands stop moving before performing button
operations.
Q2 The second hand is jumping at twosecond intervals.
Battery power is low. Keep the watch exposed
to light until it recharges sufficiently.
l Charging the Watch
Q3 All hands are stopped at 12 o’clock
and buttons do not work.
The battery is dead. Keep the watch exposed
to light until the battery recharges sufficiently.
l Charging the Watch
Q4 The hands suddenly start moving at
high speed.
This is due to one of the reasons below, and
does not indicate malfunction. Simply wait
until normal hand movement resumes.
The watch is recovering from a power
saving state.
l Power Saving
●
Establish a connection with the phone and
correct the time setting.
l Auto Time Adjustment
●
of alignment.
Strong magnetism or impact may cause the
hands of the watch to go out of alignment. Use
CASIO WATCH+ to correct hand alignment.
l Correcting Hand Alignment
Q7 The time setting is correct, but the
day indicator is between days.
The day is in the process of changing. For
information about how the day changes, see
the section below.
l Day Indicator Movement
Crown Operations
Q1 Nothing happens when I rotate the
crown.
Leaving the crown pulled out for more than
three minutes without performing any
operation will automatically disable crown
operation. Push the crown back in to its normal
position and then pull it out again.
l Using the Crown
Q2 Crown operation does not work.
Crown operation is disabled while high-speed
hand movement is in progress after a watch
setting is changed, etc. Wait until the hands
stop moving before performing crown
operations.
Charging
Q1 The watch does not work even
though it is exposed to light.
The watch stops operating whenever the
battery goes dead. Keep the watch exposed
to light until it recharges sufficiently.
l Solar Charging
15
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising