ReferenceMate portable reference source REF2510 industrial

REF2510 industrial monitoring kits
Key features
Front panel
controls
REF2510
REF2510R
The ReferenceMate portable vibration reference source enables users in the field to easily verify
sensor performance and the integrity of the cabling between the sensor and the online system.
A built-in reference accelerometer assures that a 1 g test level is maintained for sensors weighing up to 250 grams.
Frequency of operation and measurement type (peak/RMS) are push button selected.
• 61.4 Hz for imperial measurements, where 1 g is equal to 1 inch per second (ips), for
verification of acceleration and velocity
• 100.0 Hz to confirm sensor calibration value
• 159.2 Hz for metric measurements, where 1 g is equal to 9.81 m/sec2 and 9.81 mm/sec
LEDs notify the user when battery condition falls below operational levels or if the unit is
overloaded. For calibration verification, reference test points are provided to verify the output of
the internal sensor.
1
4-28 UNF-2B
0.36 DEEP
MOUNTING HOLE
0.31 [7.9]
OOR
ON/OFF
HOLD FOR
PEAK/RMS
Ø2.10 [Ø53.3]
BAT
PEAK
100
Ø1.0 [Ø25.4]
61.4
max
FREQ
159.2
1
4-28 UNF-2B
0.39 DEEP
MOUNTING HOLE
RMS
g
ReferenceMate portable reference source
9.06 [230.2]
DC JACK
Meggitt Sensing Systems
Additional product lines and services
Piezoelectric accelerometers | Piezoresistive accelerometers | Variable capacitance accelerometers |
IEPE and Isotron® accelerometers | 4-20 mA vibration sensors | Cable assemblies | Transmitter modules
99189 B 08/15
• 1 g selectable reference source
(61.4, 100.0 or 159.2 Hz)
• Crossover frequencies designed
for easy velocity verification
• Verify and adjust entire
systems from transducers to
measurement equipment
• User selections retained on
power off
• Test vibration sensors weighing
up to 250 g
• Accessories for every application
• Optional cube for checking triaxial
sensor ouputs simultaneously
• Standard AA battery operation for
field use
• Optional rugged boot offers
protection in harsh plant
environments
Certifications
ReferenceMate portable reference source
REF2510 industrial monitoring kits
Specifications
Applications
Operating frequency
± 1%
61.4 Hz
Acceleration output
± 3%
1.00 g (9.81 m/s )
1.00 g (9.81 m/s )
1.00 g (9.81 m/s )
1.00 ips (25.4 mm/s)
0.61 ips (15.6 mm/s)
0.39 ips (9.8 mm/s)
2.6 mils (65.9 μm)
0.98 mils (24.8 μm)
0.39 mils (9.8 μm)
1,280
320
240
1
100.0 Hz
2
Velocity output
1
Displacement output1
Operating cycles, 250 gram load2
Mounting thread
1/4-28 female
Mounting torque, maximum
10 in-lb (112 N-cm)
Distortion, 100-250 gram load
<3%
Load, min - max
none - 8.8 oz (250 g)
Automatic switch off time
approximately 90 ±10 sec defeatable
Temperature range
+15 to +130° F (-10 to +55° C)
-40 to +185° F (-40 to +85° C)
operating
storage
159.2 Hz
2
Ramp-up time
<3 sec
Internal battery
4x AA alkaline batteries
DC power
6 VDC ±5%, 1A, center positive
Shaker dimensions
diameter: 2.10 in (5.33 cm), height: 9.25 in (23.50 )
Weight, with batteries
32 oz (900 g)
Case material
6061 aluminum, black hard-coat anodized
IP rating
IP54
Boot material (REF2510R)
thermoplastic rubber
2
User selectable: peak or rms
2
Using supplied alkaline batteries
1
Ordering information
REF2510R rugged industrial kit
REF2510 industrial kit
Handheld shaker
REF2500
Handheld shaker w/ rugged boot
REF2500R
AA batteries (4x)
A69203
AA batteries (4x)
A69203
Calibration sheet
94511
Calibration sheet
94511
Belt clip
A61164
Belt clip
A61164
Wrench
A61088
Wrench
A61088
Carrying case with foam insert
80315-01/80311-01
Carrying case with foam insert
80315-01/80311-02
1/4-28 to 1/4-28 mounting stud
SF6
1/4-28 to 1/4-28 mounting stud
SF6
Note: Due to continuous process improvement, specifications are subject to change without notice.
This document is cleared for public release.
Meggitt Sensing Systems
Additional product lines and services
Piezoelectric accelerometers | Piezoresistive accelerometers | Variable capacitance accelerometers |
IEPE and Isotron® accelerometers | 4-20 mA vibration sensors | Cable assemblies | Transmitter modules
• Industrial and manufacturing
equipment
• Rotating machinery
• Online monitoring systems
• Cable integrity checks
ReferenceMate portable reference source
REF2510 industrial monitoring kits
Contact
Optional accessories
REF001 universal mounting kit
1/4-28 to 10-32 adaptor stud
1/4-28 to 8-32 adaptor plate for 997 and 712 sensors
1/4-28 to 10-32 adaptor plate
90° adaptor plate for 993 series sensors
SF3
13249-01
13249-02
13267-01
REF002 metric mounting kit
1/4-28 to M6 adaptor stud
1/4-28 to M8 adaptor stud
1/4-28 to M4 adaptor plate for 997 and 712 sensors
1/4-28 to M6 adaptor plate for captive screw sensors
1/4-28 to M8 adaptor plate for captive screw sensors
SF6M-1
SF6M
13249-03
13249-04
13249-05
Universal AC adaptor, international compatibility
REF003
2 pole magnet
MD055
Triaxial accelerometer angled adaptor
TAA01
Meggitt Sensing Systems
20511 Seneca Meadows Parkway
Germantown MD 20876, USA
Tel: +1 (301) 330 8811
Fax: +1 (301) 330 8873
wilcoxon@meggitt.com
www.wilcoxon.com
www.meggitt.com
Carrying case with portable shaker
REF2510
REF2510R
Note: Due to continuous process improvement, specifications are subject to change without notice.
This document is cleared for public release.
Meggitt Sensing Systems
Additional product lines and services
Piezoelectric accelerometers | Piezoresistive accelerometers | Variable capacitance accelerometers |
IEPE and Isotron® accelerometers | 4-20 mA vibration sensors | Cable assemblies | Transmitter modules

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project