D ME-325 O
Professional lighting systems for industrial imaging
DOME-325
Dome light
>> large-sized dome light
>> extremely homogeneous, diffuse illumination
>> optional segment control (4 or 8 channels)
>> optional front cover for the LED structure
>> for continuous, switched and pulsed operation
(depending on type)
DOME-325
DOME-325
Technical specifications
Housing
Total weight
Operating / ambient temperature
IP protection class
Connector
Supply voltage**
Number of LEDs
LED lifetime
Aluminium, high-quality plastic
approx. 1810g
max. 50°C recommended
depending on the version
M12 plug (5-pin) / 4-Channel-Operation: M12 plug (5-pin) / 8-Channel-Operation: M12 plug (17-pin) *
24VDC type or 12VDC type: 24VDC resp. 12VDC
SC type: For use in conjunction with a controller
32
The LED lifetime of our lights is very high, but depends on many different factors such as ambient
temperature, current load, and so on. Further information is available in the Technical information LED
lifetime.
** Cable not included in the scope of supply
** more information see section Operating modes
Characteristics
LED characterisitcs
Wavelength
(approx.)
Viewing angle
red
635nm
120°
white
6500K
120°
850nm
120°
Colour *
IR
typical characteristics per light
Current demand (24V type) ** /
constant current max. (SC type) Pulse current max. (SC type) ***
[mA]
[mA]
Intensity ****
[W/m²]
**** other colours and types from UV to infrared on request
**** stated current values ?
of the 24V types should be considered approximate values
**** depending on the strobe conditions, recommended maximum values ?
for a flash time of 1ms
**** approximately data measured in DC mode; Measuring distance 10mm below housing
Safety note!
LED light systems can produce very intense radiation, which may possibly damage the eyes on improper use. Do not
look directly into the light beam with unprotected eyes! Use eye protection!
Operating modes
24VDC type / 12VDC type
The lights are designed depending on the version for continuous operation at 24VDC or 12VDC.
The following operating modes are possible:
technical changes reserved
- DC operation at an appropriate power supply with 24VDC or 12VDC
- Switched operation with a matching power supply e.g. via PLC, opto-relay or controller (GS or SC series)
- Brightness-controlled operation via controller (GS or SC series) in conjunction with suitable power supply
- Pulsed mode via controller (GS or SC series) in conjunction with suitable power supply. The LED current can be increased in pulse mode up
to a factor of 2 to 3.
SC type
For pulsed, switched or brightness-controlled operation, the lights are also available as optimized SC versions. They can be used in
combination with our controllers of the GS and SC series and provide optimized and maximum current flow, especially in pulsed operation.
We will assist you in selecting the right components.
Büchner Lichtsysteme GmbH
Uzstrasse 2
86465 Welden
Germany
Version: 2.0
Tel.: +49 (0)8293 | 909 112
Fax: +49 (0)8293 | 909 111
E-mail: info@buechner-lichtsysteme.de
Web: www.buechner-lichtsysteme.de
www.imaging-light-technology.com
Page 1 of 3
Professional lighting systems for industrial imaging
DOME-325
Dome light
Dimensions
aerial view
4 x mounting threads for
camera adjustment
4x M3 pitch point 90°
pitch circle D 60
M12 plug (5-pin)
90°
profile
approx 166
D 75
D 325
bottom view
pitch circle
D 380,0
6 x mounting threads
D 50
60°
D 260
technical changes reserved
drill D3,2
6x pitch point 60°
345
Benchmark 1:5
Büchner Lichtsysteme GmbH
Uzstrasse 2
86465 Welden
Germany
Version: 2.0
Tel.: +49 (0)8293 | 909 112
Fax: +49 (0)8293 | 909 111
E-mail: info@buechner-lichtsysteme.de
Web: www.buechner-lichtsysteme.de
www.imaging-light-technology.com
Page 2 of 3
Professional lighting systems for industrial imaging
DOME-325
Dome light
PIN assignment connector
M12 plug 5-pin
(Front view on housing)
3
4
5
1
13 3
4
2 12
1
11
10
7
Function
+ 24V
- Ch. 1
- Ch. 2
- Ch. 3
- Ch. 4
24VDC type
PIN Colour
17 white/grey
1
brown
2
blue
3
white
green
4
5
rose
6
yellow
7
black
8
grey
Function
+ 24V
- Ch. 1
- Ch. 2
- Ch. 3
- Ch. 4
- Ch. 5
- Ch. 6
- Ch. 7
- Ch. 8
12VDC type
PIN Colour
1
white
2
3
4
5
Function
+ 12V
- Ch. 1
- Ch. 2
- Ch. 3
- Ch. 4
SC type
PIN Colour
1
black
2
3
4
5
Function
+ common
- Ch. 1
- Ch. 2
- Ch. 3
- Ch. 4
2
M12 plug 17-pin
(Front view on housing)
17
5
14
6
15
24VDC type
PIN Colour
1
brown
2
white
3
black
4
blue
5
gr/ye
8 169
12VDC type
PIN Colour
Function
+ 12V
- Ch. 1
- Ch. 2
- Ch. 3
- Ch. 4
- Ch. 5
- Ch. 6
- Ch. 7
- Ch. 8
SC type
PIN Colour
Function
+ common
- Ch. 1
- Ch. 2
- Ch. 3
- Ch. 4
- Ch. 5
- Ch. 6
- Ch. 7
- Ch. 8
Application notes
Dome application
The optical opening for the camera is
located symmetrically on the top of
the dome and has a diameter of
14mm.
Other diameters on request!
Camera
optical opening
The DOME is typically positioned
close to the object.
Object
Options
technical changes reserved
The DOME-170 can optional be configured so that the LED ring can be controlled in 4 or 8 segments, which are all individually controllable.
Therefor other connectors are used, dependent on the number of channels:
M12 (5-pin) (1 channel), M12 (5-pin) (4 channels) or M12 (17-pin) (8 channels).
Büchner Lichtsysteme GmbH
Uzstrasse 2
86465 Welden
Germany
Version: 2.0
Tel.: +49 (0)8293 | 909 112
Fax: +49 (0)8293 | 909 111
E-mail: info@buechner-lichtsysteme.de
Web: www.buechner-lichtsysteme.de
www.imaging-light-technology.com
Page 3 of 3
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising