4-channel MJPEG Video Server for Remote Surveillance via TCP/IP

4-channel MJPEG Video Server for Remote Surveillance via TCP/IP
Video Networking Solutions
2140
4-channel MJPEG Video Server for Remote Surveillance via TCP/IP
Networks
Features
VPort 2140
• Digitizes analog video signals INSTANTLY
• Remote access with built-in web server for
viewing and configuring
• Auto-sensing 10/100 Mbps Ethernet port and
Modem dial-in connection
• Built-in Video Motion Detection (VMD)
• Supports PTZ (PAN/TILT/ZOOM) motorized camera
control via 2 RS-232/RS-485 COM ports
• Equipped with 4 DIs and 2 DOs for external sensors and alarms
• Snapshot images can be sent via FTP or E-mail
• MOXA SoftDVR Lite for viewing and recording bundled free
* ActiveX Control SDK supports flexible interface and sample codes for third-party developers.
(Please contact a MOXA sales representative if you require this SDK.)
Overview
MOXA VPort 2140 Video Server, equipped with 4-ch video
input and 4-ch video output (75Ω switch off), image digitizer,
image compressor with Motion-JPEG compression, and web
server with 10/100 Mbps Ethernet/Modem interface, can digi-
tize analog video sources and distribute digital images over a
computer network, turning your CCTV video surveillance system into a “Video over IP” Network System INSTANTLY.
Built-in Web Server for video management and control
MOXA VPort 2140 has a built-in Web Server that gives users
complete management and control of the camera and video
images. In addition to viewing and camera/video settings,
advanced functions, such as VMD (Video Motion Detection),
PTZ camera control, and sequential viewing, are also provided
by VPort 2140. Snapshot images taken by either VMD or
sequential mode can be obtained by email or FTP to inform
users of the status of events.
Typical Application
4-10
e-mail: info@moxanet.com
www.moxa.com
Industrial Ethernet Solutions for
Control and Automation
Integrated Network System Structure
System integrators can use VPort 2140 Video Server to integrate
various functions, such as camera management, video storage,
video recording and playback, VMD (Video Motion Detection), video
interaction with DI/DO devices, etc., over an IP-based network.
Automatic Video Surveillance System via interaction with I/O sensors
and alarms
MOXA VPort 2140 Video Server comes equipped 4 Digital Inputs
and 2 Relay Outputs to connect with sensors and alarms. By using
system software (such as MOXA SoftDVR™ Pro IP Surveillance
Software) or Script Command programming, users can construct
an automatic video surveillance system by setting up the interaction
between cameras and DI/ DO devices.
Specifications
Technology
External Power Input: Terminal Block for DC 12V, min. 1.5A
Power Output: Terminal block for DC 12V, max. 500 mA
Video Inputs (BNC): 4
Video Outputs (BNC): 4 (75 Ω resistance switch off)
NTSC/PAL: Auto-sensing
Mechanical
Dimensions: 193.71 x 195 x 44 mm (W x H x D)
Weight: 890 g
Network
Protocols: TCP/IP, HTTP, SMTP, FTP, Telnet, NTP, DNS, and DHCP
Modem: PPP (Dial-in, direct cable connection)
Ethernet: Auto sensing 10/100 Mbps
LED Indicators: Network: ACTIVE, LINK, FDX (full duplex)
System: POWER, CONNECT, SERIAL
Serial Port
GPIO:
Ditital Input: 4 (max. 12 VDC @ 50 mA)
Relay Output: 2 (max. 24 VDC @ 1A, 125 VAC @ 0.5A)
Video
Video Compression: JPEG, MJPEG
Video Viewing:
• Adjustable image size and quality • B/W or color control
• Timestamp and text overlay
• QUAD screen display
Video Resolution:
NTSC: Up to 30 frames at 176 × 112
Up to 30 frames at 352 × 240
Up to 9 frames at 704 × 480 or QUAD
PAL: Up to 25 frames at 176 × 144
Up to 25 frames at 352 × 288
Up to 8 frames at 704 × 576 or QUAD
Environmental
Operating Temperature: 0 to 60oC (32 to 140oF),
Storage Temperature: -40 to 70oC (-40 to 158oF)
Ambient Relative Humidity: 5% to 95% (non-condensing)
Regulatory Approvals: FCC, CE
Warrany: 5 years
Alarm Features:
• Motion detection with percentage and sensitivity
• Daily-repeated timing schedule
• 3-color images per camera for pre/post alarm
• Automatic transfer of stored images via email or FTP with
event-triggered actions
VPort 2140
COM 1: Male DB9 RS-232, max. 115.2 Kbps
COM 2: Male DB9 RS-232, max. 115.2 Kbps
RS-485: Terminal Block for Data+, Data-, max. 115.2 Kbps
Installation: Wall Mounting
PAN/TILT/ZOOM
• Multiple PTZ camera control through RS-232/485
• Supported devices and protocols:
Sony VISCA, Cannon VC-C3//VC-C1/VC-C4, Dynacolor
Smart DOME, Pelco D protocol, Liling, Ernitec, Custom camera
Remote Software Upgrade
System firmware upgradable via bundled upgrade wizard or FTP
Security: User level password protection
Viewing System requirements
• Internet Explorer 4.x or above
• Netscape Navigator 4.x or above
Power
Software Bundled Free
Input Voltage: 12 VDC, 1.5A
Consumption: near 7.8 W
MOXA SoftDVR™ Lite: 1- to 4-ch IP Surveillance Software
for viewing & recording
Ordering Information
VPort 2140: 4-ch MJPEG Video Server with 100 to 240V power adaptor (12 VDC, 1.5A, or 12 VDC, 1.25A for UK plug)
Items included:
• 1 VPort 2140 Video Server
• Quick Installation Guide
• CD with User’s Manual, SoftDVR Lite IP Surveillance Software
• Power Adaptor
• Null Modem Cable
• PTZ Camera Control Cable
• I/O Terminal Block Kit
e-mail: info@moxanet.com
www.moxa.com
4-11
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising