roller laminators

roller laminators
ROLLER LAMINATORS
JetMounter™ Roller Laminators
The design of JetMounter™ roller laminators is the
culmination of three decades of experience in the
mounting and laminating business. Equipped with
the performance features our customers demand,
JetMounter™ roller laminators are unmatched for
value.
JetMounter™ JM63Pro
Heated top roller laminator gives maximum flexibility.
The JM63 is a versatile wide-format roller laminator with roll to roll
capability at a price you didn’t think was possible. The addition
of the heated top roller allows it to be used with Heatset™ and
single-sided thermal overlaminates as well as pressure sensitive
laminates and adhesives.
Features:
• Top silicone roller has an adjustable temperature range from
room temperature to 120o Celsius (248oF)
• Effective laminating width of 1600mm (63”)
• Auto and foot pedal operation mode
• Speed control 0 - 3.65m (12 ft) per minute
• Maximum 5.08cm (2”) nip opening
• Nip pressure indicator
• Fold away front table
• Heavy duty lockable casters
• Two top mounted emergency stops
• “Hold flat” paper in-feed guide
• Large 14cm (5.5”) diameter non-stick silicone rollers
• Self-checking photo cells for finger protection
• Top and bottom auto-grip supply shafts with brake tension
JM63 SPECIFICATIONS
Max Laminating Width
63”
Max Nip Opening
5.08 cm (2”)
Uncrated Weight
440 kg (970 lbs.)
Width
210.8 cm (83”)
Depth
73.7 cm (29”) w/o table up
81.3 cm (32”) w/ table up
Height
124.4 cm (49”)
Roller Diameter
13.97cm (5.5”)
Speed Range
0 - 4 m/minute (0-13 ft/minute)
Power (U.S. and Canada)
220V 50/60Hz, 13A Single
Phase
Power Consumption
2700 Watts
control
• Top and bottom wind-up with shafts adjustable speed.
• Single mechanical height/pressure adjustment (No
compressor needed)
• Extra rear windup shaft for rewinding roll to roll
JetMounter™ JM63SHA, JM54SHA & JM44SHA
In addition to the standard features offered by all JetMounter™
electric models, including variable speed electric drive, silicone
rollers, all-steel construction, forward and reverse, foot pedal and
photo-electric safety stop, the JM63SHA, the JM54SHA and the
JM44SHA offer these additional features:
JM63SHA
• Single height adjuster to set even pressure more easily
• LCD pressure gauge display allows greater control over the
process
• Front-mounted media unwind tray with supply shaft can be
used for feeding media, mounting adhesive or kraft paper
(JM63SHA and JM54SHA only)
• Heavy duty metal stand with locking castors (comes standard
with all three models)
JM54SHA & JM44SHA
(Front mounted media unwind tray on JM54SHA only)
JM44SHA, JM54SHA & JM63SHA SPECIFICATIONS
JM63SHA
JM54SHA
JM44SHA
Max Laminating Width
162 cm (63.75”)
134.4 cm (54.50”)
113 cm (44.5”)
Max Nip Opening
2.5 cm (1”)
2.5 cm (1”)
2.5 cm (1”)
Uncrated Weight
170 kg (375lbs)
150 kg (331lbs)
110 kg (243lbs)
Width
211 cm (83”)
179.1 cm (70.5”)
153.9 cm (61”)
Depth
48 cm (19”)
48 cm (19”)
48 cm (19”)
Height (without stand)
48 cm (19”)
48 cm (19”)
48 cm (19”)
Height (with stand)
123.7 cm (48.7“)
123.7 cm (48.7“)
123.7 cm (48.7”)
Roller Diameter
127mm (5”)
12.7 cm (5”)
10.2 cm (4”)
Speed Range
0.6-3 mpm (2-10 fpm)
0.6-3 mpm (2-10 fpm)
0.6-3 mpm (2-10 fpm)
Front Media Unwind Tray
Yes
Yes
N/A
Power
220V 50/60Hz, Single Phase
220V 50/60Hz, Single Phase
115 VAC or 230 VAC 50/60Hz
JetMounter™ JM18, JM26 & JM34
The JM18, JM26 and JM34 are motorized table top laminators
operated by a foot switch, leaving both hands free to handle the
work being processed. These models are designed for mounting
and laminating inkjet outputs, but are equally capable of handling
photographic or any printed media. All models include a supply
shaft and photo cells for finger protection.
Note: There are no rewind shafts on these models.
Now available in a
34 inch model!
JM18, JM26 & JM34 SPECIFICATIONS
JM34
JM26
JM18
Max Laminating Width
86.9 cm (34.25”)
66.7 cm (26.25”)
46.4 cm (18.25”)
Max Board Thickness
1.9 cm (.75”)
1.9 cm (.75”)
1.9 cm (.75”)
Unpacked Weight
32 kg (70.5 lbs)
24 kg (53 lbs)
23kg (51lbs)
Width
105 cm (41.33”)
84.5 cm (33.25”)
64.8 cm (25.5”)
Depth
30 cm (11.8”)
31 cm (12.2”)
29.9 cm (11.75”)
Height
34 cm (13.38”)
31 cm (12.2”)
33 cm (13”)
Speed Range
0.76.-5.5 mpm (2.5-18 fpm)
0.76.-5.5 mpm (2.5-18 fpm)
0.76.-5.5 mpm (2.5-18 fpm)
Power
115 VAC or 230 VAC 50/60 Hz
115 VAC or 230 VAC 50/60 Hz
115 VAC or 230 VAC 50/60 Hz
ML25
This table-top manual laminator is an inexpensive option for small
photo studios or copy shops that want a quick solution to mount
or laminate small pieces. Simple, durable construction makes this
model easy to use. It also folds up for easy storage and transport.
ML25 SPECIFICATIONS
Max Laminating Width
64.8 cm (25.5”)
Max Nip Opening
1 cm (.375”)
Weight
14 kg (32 lbs.)
Width
69.5 cm (27.375”)
Depth
62.2 cm (24.5”)
Height
26 cm (10.25”)
Roller Diameter
6.3 cm (2.5 in. )
CONTACT :
Tel
+44 (0)117 958 6500/0845 070 0660
Emailbristol@drytac.com
Webwww.drytac.com
RevDec2111
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising