Battery Charger digital disPlay
ntee •
rA
• gua
tee
DE
CE • MA
2 years
Battery charger digital display
a
• gu rAn
arAntee
gu
IN FRA
E • MA
NC
DE
IN FRAN
General Characteristics
•Display characteristics
LCD display 2 lines, 16 digits. Integrated back light.
• Displayed parameters
• Charger ON
- Voltage of each battery output : BATD, BAT1 and BAT2
- Functioning time of the charger
- Current delivered by the charger
- Over voltage defect charger output
• Charger OFF
- Voltage of each battery output : BATD, BAT1 and BAT2
- BATD, BAT1 and BAT2 battery charge status (%)
BATD, BAT1 and BAT2 battery discharged defect
• Consumption :
0,5mA in stand-by mode. 30mA in normal using.
The CRISTEC digital displays enable to get accurate information on the battery
voltage, the current delivered by the charger, the battery charge status and the
historic of possible defects (discharged batteries, output overvoltage, etc.).
Only suitable with the CRISTEC - 12V and 24V - CPS2 and CPS3 standard
charger and shore-power unit ranges - YPOWER : consult us -, the configuration
of the charger type is made through switch combination present on the digital
display electronic board.
User-friendly connection and easy installation, the CRISTEC digital displays
are supplied with a 10 meter cable and 2 phone type connectors. They check
automatically the number of batteries connected to the charger (1, 2 or 3) and
can be mounted on the main on-board panel (no additional furniture to be
supplied except the screws).
In order to ensure an optimal readability, the digital displays have an integrated
back light. They will automatically switch OFF when the charger is disconnected
from AC to reduce consumption.
Physical Characteristics
1 ON/OFF push button if the charger is stopped
and the LCD powered from the batteries only
• Stand-alone electronic remote panel 110 x 110mm
• Protective front to be fixed to the panel
• Finish matt black label with yellow text
• Fixings : opening from 90 x 90 mm + 4 drillings ø 4mm
• Connection : include 10m cable supplied with phone type connectors
• Natural cooling
• Operating temperature : from -10°C to +50°C
•
Part number : SEEL009104
We reserve the right to make modifications to the specification without prior notice. Please consult us.
S.A.S. Cristec Industries
31 rue Marcel Paul - Z.I. Kerdroniou Est - 29000 Quimper - FRANCE
Tel. +33 (0)2 98 53 80 82 - Fax +33 (0)2 98 55 64 94 - e-mail : info@cristec.fr
www.cristec.fr
F-MON1-00-D
Presentation
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising