Video Surveillance Remote Devices and Sensors

Video Surveillance Remote Devices and Sensors
DIVISION 28 ELECTRONIC SAFETY AND SECURITY
JVC U.S.A.
Professional Products Group
1700 Valley Road
Wayne, New Jersey 07470
(800) 582-5825
www.jvc.com/pro
This product specification is based on recognized industry standards for project documentation found within the
Construction Specification Institute (CSI) Project Resource Manual – CSI Manual of Practice [5th Edition],
MasterFormat™ [2004 Edition], SectionFormat™ [1997 Edition] and PageFormat™ [1999 Edition].
This specification is based on JVC model VN-X235U/VPU and may be used as a manufacturer based proprietary
specification or edited to a performance based specification. Optional text is presented in brackets [ ]; delete optional
text as required in final project documentation. Specifier Notes are intended to provide information and guidance
relative to the specific product or system ensuring proper configuration, performance and operation; delete these notes in
final project documentation.
Section 28 23 29
Video Surveillance Remote Devices and Sensors
PART 1 GENERAL
1.01 SUMMARY
A.
Section includes: One third inch Progressive Scan CCD Internet Protocol (IP) surveillance camera
with automatic color to black and white switching and dual stream output
B.
Related Requirements:
Specifier Note: Projects may vary in scope and complexity; as such it is important to identify those sections which may
have an impact on system operation or integrity. Closed circuit television systems often interface or integrate with other
building systems. Within certain projects communication and electrical cabling may often be related to requirements
found in the overall building wiring requirements. Edit or revise those sections as required for specific project or are
specification practices. It is important these sections be reviewed and addressed if the project warrants or are
specification practices. Contact a JVC Representative for further assistance.
1.
2.
3.
4.
26 05 19
26 41 23
26 55 53
26 56 00
Low-Voltage Electrical Power Conductors and Cables
Lighting Protection, Surge Arrestors and Suppressors
Security Lighting
Exterior Lighting
Specifier Note: The convergence of IT Infrastructures and Network Video technology may often require the integration
of equipment enclosures and related hardware typically found in data center environments. Edit or revise those sections
as required for specific project or are specification practices
5.
27 11 16
Communication Cabinets, Racks, Frames and Enclosures
© Copyright 2008, Victor Company of Japan, Limited. All rights reserved. “JVC” is the trademark or registered trademark of Victor Company of Japan.
All non-metric weights and measures are approximate. Features and specifications are subject to change with out notice.
MasterFormat, SectionFormat and PageFormat are trademarks of the Construction Specification Institute.
1 of 11
VN-X235U_VPU_v1_1202
Section 28.23.29 Video Surveillance Remote Devices and Sensors
6.
7.
C.
27 21 00
27 22 00
Data Communication Network Equipment
Data Communication Hardware
Multi-Section Requirements:
Specifier Note: Product(s) in this section require interface to or integration with other closed circuit television
components to operate as a complete system. As projects vary in scope and complexity; it is important to identify those
sections which may require product integration, have an impact on system operation or infrastructure integrity. Edit or
revise those sections which may apply to a specific project. Contact a JVC Representative for further assistance.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
01 61 13
01 86 33
28 01 20
28 05 00
28 06 20
28 08 00
28 13 33.33
28 16 33.33
28 23 13
28 23 16
28 23 19
28 23 26
28 23 23
28 31 33.33
Software Licensing Requirements
Electronic Safety and Security Performance Requirements
Operation and Maintenance of Electronic Surveillance
Common Work Results for Electronic Safety and Security
Schedules for Electronics Surveillance
Commissioning of Electronic Safety and Security Systems
Access Control Interfaces to Video Surveillance
Intrusion Detection Interfaces to Video Surveillance
Video Surveillance Control and Management Systems
Video Surveillance Monitoring and Supervisory Devices
Digital Video Recorders and Analog Recording Devices
Video Surveillance Remote Positioning Equipment
Video Surveillance Infrastructure
Fire Detection and Alarm Interfaces to Video Surveillance
1.02 REFERENCE STANDARDS
A.
National Television System Committee - NTSC (North America)
B.
Joint Photographic Experts group - JPEG
C.
Motion Joint Photographic Experts Group - MJPEG
D. Moving Picture Experts group - MPEG
E.
Underwriters Laboratory – UL
F.
Federal Communications Commission - FCC
G. Interference Causing Equipment Standard – ICES (Canada)
H. Institute of Electronic and Electrical Engineers - IEEE
I.
International Standards Organization – ISO
J.
International Electrotechnical Commission -IEC
K. Restriction of Hazardous Substances Directive (RoHS)
© Copyright 2009, Victor Company of Japan, Limited. All rights reserved. “JVC” is the trademark or registered trademark of Victor Company of Japan.
All non-metric weights and measures are approximate. Features and specifications are subject to change with out notice.
MasterFormat, SectionFormat and PageFormat are trademarks of the Construction Specification Institute.
2 of 11
VN-X235U_VPU_v.1_1202
Section 28.23.29 Video Surveillance Remote Devices and Sensors
1.03 ADMINISTRATIVE REQUIREMENTS
Specifier Note: Closed Circuit Television systems are often installed in multiple phases, similar to certain electrical
components. It is important to schedule these phases in conjunction with construction phases. Improperly run wires or
undesirable mounting locations may degrade system performance, and, may void the manufacturer’s warranty.
A.
Coordination: Ensure Closed Circuit Television System installation is fully coordinated with
provisions of Division 1, section 01 31 00 – Project Management and Coordination
B.
Scheduling: Ensure pre-installation of cabling, mounting hardware and equipment installation is
fully coordinated with Division 1, Section 01 32 00 – Construction Progress Documentation
1. Building envelop must be substantially completed and HVAC systems installed and
operationally prior to final equipment installation
1.04 SUBMITTALS
A.
General: In compliance with Conditions of the Contract and Division 1, Section 01 33 00
Submittal Procedures
B.
Product and technical data:
1. Manufacturers technical data sheets and bulletins
2. Manufacturers installation and operation manuals
3. Manufacturer Maintenance data
4. Spare parts list and recommended hardware
a. Recommended maintenance contract
C.
Shop Drawings:
1. Wiring diagrams
2. Equipment placement locations
3. Schedules and tables: Product quantity and placement
Specifier Note: When comparing/choosing digital video security equipment, many products may be derivatives of
consumer electronics. The following language ensures the Owner the proper equipment is being used for the intended
purpose.
1.05 QUALITY ASSURANCE
A.
The system shall be manufactured for the intended purpose in a commercial / industrial, 24 hour
day, 7 days per week, and 365 days per year operating environment
B.
Manufacturer Qualifications:
1. Obtain [products] [systems] from a manufacturer experienced in the engineering, production
and support of closed circuit television systems, and, with sufficient production capability to
meet the required project schedule
2. Manufacturer capable of providing field representation during design, installation and
commissioning of systems
© Copyright 2009, Victor Company of Japan, Limited. All rights reserved. “JVC” is the trademark or registered trademark of Victor Company of Japan.
All non-metric weights and measures are approximate. Features and specifications are subject to change with out notice.
MasterFormat, SectionFormat and PageFormat are trademarks of the Construction Specification Institute.
3 of 11
VN-X235U_VPU_v.1_1202
Section 28.23.29 Video Surveillance Remote Devices and Sensors
Specifier Note: Regulations specific to this section vary by geographic location and Owner requirements. Coordinate
article below with Local Authority Having Jurisdiction and/or Owner for requirements. Edit or revise article below as
required for a specific project or specifiers practice.
C.
Regulatory Requirements:
1. Video Compression:
a. MPEG-4: Part 2 – ISO/IEC 1449602
b. MJPEG
2. Emission / Immunity:
a. FCC Part 15, Subpart B, Class A Digital Device
3. Transmission
a. Ethernet: IEEE 802.3 / 802.3u / 802.3af
4. Safety:
a. UL Listed 60950-1
5. Ingress Protection:
a. IEC IP66
6. Environmental Sustainability:
a. RoHS Directive Compliant
1.06 DELIVERY, STORAGE AND HANDLING
A.
General: Comply with Division 1, Section 01 61 00 Common Product Requirements and the
manufacturers recommended procedures for receiving and protection of the equipment
B.
Storage and Protection: Store materials protected from exposure to extreme or harmful
environmental conditions and at temperature and humidity levels recommended by the
manufacturer:
1. Deliver individual components in the manufacturers original packaging and labeling
2. Prevent physical damage, soiling or wetting
3. Provide secure storage prior to and during installation
1.07 PROJECT/SITE CONDITIONS
A.
Environmental Requirements:
1. Site should be substantially enclosed and secure prior to installation of hardware
2. Environmental systems should be in place and operational
3. Deliver materials onsite at least 24 hours prior to installation to allow materials to reach
temperature and humidity equilibrium
1.08 WARRANTY
A.
Provide original equipment manufacturers warranty documentation for acceptance by the Owner
Specifier Note: Coordinate sub-paragraph below with manufacturers warranty policies and procedures if different from
General Conditions, specifically Division 01, Section 01 78 36 - Warranties
1. Warranty Period: [specify term] commencing with the Date of Substantial Completion
PART 2 PRODUCTS
© Copyright 2009, Victor Company of Japan, Limited. All rights reserved. “JVC” is the trademark or registered trademark of Victor Company of Japan.
All non-metric weights and measures are approximate. Features and specifications are subject to change with out notice.
MasterFormat, SectionFormat and PageFormat are trademarks of the Construction Specification Institute.
4 of 11
VN-X235U_VPU_v.1_1202
Section 28.23.29 Video Surveillance Remote Devices and Sensors
2.01 INTERNET PROTOCOL CAMERA
Specifier Note: The following specification is for a common camera with two different housing options. Differences will
be noted by part numbers and enclosed with [brackets]. Select the appropriate camera/housing combinations and delete
the specifications for the remaining camera/lens combination.
A.
Manufacturer:
1. JVC Professional Products Company
Division of JVC AMERICAS CORP.
1700 Valley Road, Wayne, NJ; (800) 582-5825
www.JVC.com/pro
B.
General:
1. Provide Internet Protocol (IP) camera with simultaneous (Dual Stream) distribution of
Motion-JPEG and MPEG-4 at 15 frames per second for each video stream
2. One third inch 1.25 mega pixel Progressive Scan CCD Chip
3. Resolution
a. MJPEG
1. 1280 x 960
b. MPEG-4
1. 640 x 480
2. 320 x 240
4. Provide Color to Black and White Switching (Day/Night) Automatic switching IR cut filter
mechanism, increases or decreases sensitivity (color mode) based on ambient light conditions
5. Provide Power over Ethernet (PoE)
6. [VN-X235VPU] Provide IP66 rated vandal proof dome housing
7. [VN-X235U] Provide vandal-resistant dome housing
Specifier Note: There are no industry standards for testing or determining Scene Illumination, or Sensitivity. Light
source, scene reflectance, lens type and aperture opening all play a critical role is determining sensitivity (LUX) of a
camera. Prior to selecting and specifying cameras you are encouraged to perform a side by side comparison with all
variables being equal between cameras. Contact your JVC Representative for further information.
8.
Scene illumination
a. Color Mode:
1. 0.8 lx F1.2, AGC SUPER, 50% video
2. 0.4 lx, F1.2, AGC SUPER, 25% video
b. B/W Mode:
1. 0.08 lx F1.2, AGC SUPER, 50% video
2. 0.04 lx F1.2, AGC SUPER, 25% video
9. Sensitivity Adjustment (Sens Up):
a. Off
b. x2 – x22
10. Back Light Compensation: On/Off (switchable)
11. White Balance:
a. Continuous Auto Tracking White (ATW)
b. Auto White Control (AWC)
12. Electronic Shutter:
© Copyright 2009, Victor Company of Japan, Limited. All rights reserved. “JVC” is the trademark or registered trademark of Victor Company of Japan.
All non-metric weights and measures are approximate. Features and specifications are subject to change with out notice.
MasterFormat, SectionFormat and PageFormat are trademarks of the Construction Specification Institute.
5 of 11
VN-X235U_VPU_v.1_1202
Section 28.23.29 Video Surveillance Remote Devices and Sensors
13.
14.
15.
16.
17.
18.
C.
a. Automatic 1/15 – 1/10000
b. Flickerless control
Provide Integrated Manually Variable Focal Length Lens with Auto Iris:
a. Focal Length: 3.0 mm to 9.0 mm, x3.0
b. Aperture: F1.2 to F2.1
c. View Angle:
1. 3.0 mm: 93 degrees horizontal x 68 degrees vertical
2. 9.0 mm: 31 degrees horizontal x 23 degrees vertical
d. Iris: DC
Provide manually adjustable lens angle adjustment range of:
a. Horizontal: plus or minus 175 degrees
b. [VN-X235U] Vertical: plus or minus 80 degrees
c. [VN-X235VPU] Vertical: plus or minus 70 degrees
d. [VN-X235U] Rotation: plus or minus 100 degrees
e. [VN-X235VPU] Rotation: plus or minus 175 degrees
Alarm Management:
a. Provide IP camera with two (2) hardwired alarm inputs.
b. Alarm outputs:
1. Two (2) hardwire alarm outputs
2. Image upload over FTP
3. Network notification via TCP, UDP or email
c. Provide IP camera with digital motion detection using a programmable 8x6 grid, with
user definable sensitivity levels:
d. Privacy Mask: Free shape building
e. Provide 8MB for pre and post alarm image recording buffer
Viewing adjustments:
a. Free Scaling image clipping
b. Digital Pan, Tilt and Zoom functions
c. Focus Assistance
Display Mode
a. Custom
b. LCD1
c. LCD2
d. CRT
Provide Audio:
a. Two Way
1. Full or Half Duplex
b. One Way
c. Mike. input
d. Monaural line level audio output
Hardware
1. Provide IP camera with built in FTP Client capability for storage of alarm images
2. Minimum Personal Computer requirements:
a. Operating system: Windows Vista Business Service Pack 1 or Windows XP
(Professional or Home Edition) Service Pack 2
b. Processor: Pentium 4 2GHz or higher
c. Memory: 2GB or higher
d. Hard Disk space: 512MB or more
© Copyright 2009, Victor Company of Japan, Limited. All rights reserved. “JVC” is the trademark or registered trademark of Victor Company of Japan.
All non-metric weights and measures are approximate. Features and specifications are subject to change with out notice.
MasterFormat, SectionFormat and PageFormat are trademarks of the Construction Specification Institute.
6 of 11
VN-X235U_VPU_v.1_1202
Section 28.23.29 Video Surveillance Remote Devices and Sensors
3.
e. Video Card: 1600 x 1200 pixels or higher, True Color, 24 or 32 bit
f. VRAM: 256MB
g. Web Browser: Internet Explorer 7.0 (Windows Vista) or 6.0 (Windows XP)
Provide firmware update via HTTP
D. Software
1. Access security:
a. Provide three (3) password protected User Access levels
b. Provide IP filter to deny or allow access from a specific IP address
2. Video Compression:
a. Motion JPEG - Selectable Compression Levels:
1. VFS: Seven (7) steps
2. AFS: 3KB - 200KB
b. MPEG-4
1. Adjustable bit rate: 64kbps - 8000kbps
3. Audio Compression:
1. µ-law 64kbps
2. AD/DA 16 bits, Fs=8kHz
4. Provide built in ActiveX Viewer
a. Monitor from personal computer
b. Snapshot function
c. Viewer shall be customizeable via camera setup menu
5. Camera setup menu via Web Browser:
a. Backlight Compensation
b. Video Compression level
c. Image Resolution
d. Auto/Manual White Balance
e. Black level
f. Color level
g. Gamma Curve
h. Enhance
i. Shutter speed
j. Sensitivity Up
k. AGC
l. Exposure Value
m. Monitor Type
n. Day/Night
o. Motion Detection
p. Snapshot function
q. Video Overlay
1. Camera ID
2. Time/Date
3. Privacy Mask
6. Provide dual Application Program Interface (API):
a. Compatibility:
1. JVC
2. Verint VSIP
E.
Networking
© Copyright 2009, Victor Company of Japan, Limited. All rights reserved. “JVC” is the trademark or registered trademark of Victor Company of Japan.
All non-metric weights and measures are approximate. Features and specifications are subject to change with out notice.
MasterFormat, SectionFormat and PageFormat are trademarks of the Construction Specification Institute.
7 of 11
VN-X235U_VPU_v.1_1202
Section 28.23.29 Video Surveillance Remote Devices and Sensors
1.
2.
3.
4.
5.
Provide IP Camera with TCP/IP, UDP/IP, HTTP, FTP, ICMP, ARP, RTP, DHCP, SNTP,
SMTP, IGMP, DSCP, IPv4, IPv6 and VSIP communication protocol(s)
LAN compliance shall be IEEE802.3, 802.3u and 802.3af
Data transmission
a. Unicast
b. Multicast: IGMP Versioin 2
Maximum Clients
a. 20 simultaneous users
b. Unlimited users by multicast
Network functions:
a. Mail notice
b. Web server
c. FTP client
d. DHCP client
e. SNTP client
F.
Electrical
1. Input voltage:
a. Power Over Ethernet (PoE) IEEE802.3af compliant
b. 24 VAC, 50/60 hertz
2. Power consumption:
a. 48 VDC (PoE): 7W without heater
b. 24 VAC: 0.35A without heater
c. 24 VAC: 1.0A with heater
3. Alarm input: NPN Open collector, low level, latch or momentary, (500 ms and above). 1 mA
current during low level. 3.3 VDC applied voltage during high level
4. Alarm output: NPN Open collector. 12 VDC, 50mA maximum inflow current
5. White Balance: Continuous Auto Tracking White (ATW) or Auto White Control (AWC)
6. Black level: 3 level adjustment
7. Gamma Level: Adjustable
8. Automatic Gain Control
9. Monitor output: NTSC composite video, 1.0 volt peak to peak, 75 ohms resistance
10. Signal to Noise Ratio: 50dB, AGC OFF
G.
Mechanical
1. Dimensions:
a. [VN-X235U] 5 3/4 inches (145mm) diameter by 4 3/4 inches (120mm) high
b. [VN-X235VPU] 6 1/4 inches (160mm) diameter by 4 7/8 inches (125mm) high
2. Weight:
a. [VN-X235U] 1.8 pounds (800g)
b. [VN-X235VPU] 2.9 pounds (1300g)
3. Base controls, connectors or indicators:
a. Flying leads: Alternative power connection
b. Flying leads: 2 alarm input and 2 alarm output
c. Flying leads: Audio connection
d. RJ-45 (Category 5) 10BASE-T/100BASE-TX Network connection (auto negotiation)
e. RCA jack for monitor output (for installation only)
f. Monitor out setting switch
g. Status indicator
© Copyright 2009, Victor Company of Japan, Limited. All rights reserved. “JVC” is the trademark or registered trademark of Victor Company of Japan.
All non-metric weights and measures are approximate. Features and specifications are subject to change with out notice.
MasterFormat, SectionFormat and PageFormat are trademarks of the Construction Specification Institute.
8 of 11
VN-X235U_VPU_v.1_1202
Section 28.23.29 Video Surveillance Remote Devices and Sensors
h.
i.
Camera reset button
[VN-X235VPU] Heater power connector
H. Environmental
Specifier Note: JVC provides environmental specifications for optimal operation while achieving maximum in service
life of its products. JVC will not mislead owners with the maximum thresholds products will operate to if they reduce the
product life cycle. JVC products may operate to more extreme (higher/lower) ratings if required, however the product
lifecycle may be shortened. Should you require different environmental conditions please contact your JVC
Representative for assistance in specifying the proper products and/or optional accessories.
1.
2.
3.
4.
Temperature Range:
a. 14 to 122 degrees Fahrenheit (-10 to 50 degrees Celsius)
b. Recommended: 32 to 104 degrees Fahrenheit (0 to 40 degrees Celsius)
c. [VN-X235VPU] With heater: -22 to 122 degrees Fahrenheit (-30 to 50 degrees Celsius)
Relative Humidity Range:
a. Storage: up to 85%, non-condensing
b. Operating: up to 85%, non-condensing.
[VN-X235U] The unit is suitable for indoor operation.
[VN-X235VPU] The unit is suitable for outdoor operation.
2.02 MANUFACTURED UNITS
A.
JVC Model Number:
1. VN-X235U: Fixed IP Dome Camera with IR cut off filter and Vandal-resistant housing
2. VN-X235VPU: Fixed IP Dome Camera with IR cut off filter and Vandal Proof IP66 rated
housing
B.
Included Accessories:
1. Safety precautions
2. Read me First
3. CD-ROM including installation manual, setting manual and API guide
4. Service information card
5. Warranty card
6. Mounting template
7. [VN-X235VPU] Wrench
8. [VN-X235VPU] Silica gel
C.
Optional accessories:
1. [VN-X235VPU] KA-ZH215U - Heater unit
2. JVC V.NETWORKS Products
3. VR-N900U/1600U Network Video Recorder
4. VN-RS800U Video Management Sofware
PART 3 EXECUTION
3.01 INSTALLATION
© Copyright 2009, Victor Company of Japan, Limited. All rights reserved. “JVC” is the trademark or registered trademark of Victor Company of Japan.
All non-metric weights and measures are approximate. Features and specifications are subject to change with out notice.
MasterFormat, SectionFormat and PageFormat are trademarks of the Construction Specification Institute.
9 of 11
VN-X235U_VPU_v.1_1202
Section 28.23.29 Video Surveillance Remote Devices and Sensors
Specifier Note: Certification or licensing requirements for contractors, installers or integrators of safety and security
systems vary from state to state in the continental United States. Verify requirements with the Authority Having
Jurisdiction for the specific project. Coordinate article with Section 28 08 00 Commissioning of Electronic Safety and
Security. Edit or revise articles below as required for a specific project or specification practices.
A.
Installer Qualifications:
1. Engage Installer with [license] [certification] [specify type] as required by the [State of] [City
of] with demonstrated successful experience designing, installing, commissioning, training
and servicing closed circuit television systems
2. Installer shall have completed factory approved training and be certified by the manufacturer
as qualified to install, operate and maintain product(s) specified
B.
Install the system in accordance with the equipment manufacturers recommended procedures
C.
Install system using generally acceptable industry practices for closed circuit television systems
D. Install system using generally acceptable industry practices for network appliances
E.
Ensure system and network configuration is fully coordinated with the Owner’s Information
Technology Department.
Specifier Note: The following may be deleted for projects of smaller scope in which full Division 1 project
documentation is not provided or required. It is recommended that performance requirements be specified within the
project documentation to ensure proper configuration and operation of the system. Contact your JVC Representative for
assistance in developing a system performance specification specific to a particular project.
F.
Ensure system and all related components are configured to support performance requirements
outlined in Division 1, 01.86.33 Electronic Safety and Security Performance Requirements
3.02 EXAMINATION
Specifier Note: There are often changes to building interior structures during the course of construction. It is imperative
as built mounting locations be assessed to ensure the desired field of view can be achieved. Owners often require very
specific views of their facility and physical changes to the structure may prevent ideal mounting locations. Coordinate
and/or revise Division 1, Section 01 86 33 Electronic Safety and Security Performance Requirements
A.
Verification of Conditions:
1. Ensure wiring cable chase requirements are available
2. Ensure substrate for physical mounting locations meet manufacturer recommendations
B.
Examination and Assessment:
1. Review mounting location of each device to ensure required field of view is achievable
3.03 FIELD QUALITY ASSURANCE
A.
Provide Manufacturer Authorized Field Representation for engineering, installation, testing and
commissioning assistance as required in Division 1
3.04 COMMISSIONING
© Copyright 2009, Victor Company of Japan, Limited. All rights reserved. “JVC” is the trademark or registered trademark of Victor Company of Japan.
All non-metric weights and measures are approximate. Features and specifications are subject to change with out notice.
MasterFormat, SectionFormat and PageFormat are trademarks of the Construction Specification Institute.
10 of 11
VN-X235U_VPU_v.1_1202
Section 28.23.29 Video Surveillance Remote Devices and Sensors
Specifier Note: Edit and revise paragraphs below for projects of smaller scope in which full Division 1 project
documentation is not provided or required, it is recommended that performance requirements be specified within the
project documentation to ensure proper configuration and operation of the system. Contact your JVC Representative for
assistance in developing performance specification for a particular project.
A.
Testing: Ensure system operates to manufacturers specifications
B.
Ensure system and all related components are configured to and comply with performance
requirements in
1.
2.
C.
Division 1, Section 01.86.33 Electronic Safety and Security Performance Requirements
Division 28, section 28.01.20 Operation and Maintenance of Electronic Surveillance
User/Owner Training:
1. Provide original manufacturers [approved] [certified] training for system administrators and
operators designated by the Owner
D. Documentation: Provide [x] set(s) of manufacturers hardware installation and/or software user
guides for each level of authorized users
3.05 INSPECTION/MAINTANENCE
A.
Follow manufacturers recommended practices for preventative maintenance
B.
Comply with Division 28, section 28.01.20 Operation and Maintenance of Electronic Surveillance
C.
Ensure continuous, unrestricted airflow in environment where equipment is installed
END OF SECTION
Window, Windows XP, Windows Vista and Internet Explorer are trademarks or registered trademarks of Microsoft Corporation in the United States
and/or other countries. All product names stated in this document are trademarks or registered trademarks of their respective companies.
© Copyright 2009, Victor Company of Japan, Limited. All rights reserved. “JVC” is the trademark or registered trademark of Victor Company of Japan.
All non-metric weights and measures are approximate. Features and specifications are subject to change with out notice.
MasterFormat, SectionFormat and PageFormat are trademarks of the Construction Specification Institute.
11 of 11
VN-X235U_VPU_v.1_1202
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising