COMPACT Impact20 Cost-Efficient I/O Fieldbus Connection for the IP20 Range With its high channel density and its small dimensions, the Impact20 I/O fieldbus station is specifically suited for installations in terminal boxes and control panels. The excellent price/performance ratio ensures extreme cost savings! Different fieldbus interfaces make it possible to implement these modules in various bus systems. Flexible integration options and the choice between predefined input, output and hybrid modules enable a wide application range. The fieldbus interfaces are perfectly suited for applications with a high I/O density as in mechanical engineering, in materials-handling technology or in logistics. Impact20 offers planners and electrical engineers a solid base for minimizing project costs. EFFICIENT: CONCENTRATED ON THE ESSENTIALS Murrelektronik’s Impact20 is the perfect solution when the requirement is a costefficient application of fieldbus I/O modules in terminal boxes and control panels. Predefined Inputs and Outputs - Helps facilitate configuration Single Channel Diagnostic via LED - Indicate failures on the spot Group Diagnostic via the Bus - Facilitates failure analysis Channel-Related Shut Down - Only the failed port is cutoff MURRELEKTRONIK Related Products Impact67 MES Panel Pass Through EcoRail RJ45 Cable Murrelektronik, Inc. | 1327 Northbrook Parkway, Suite 460 | Suwanee, GA 30024 | P: 770-497-9292 | F: 770-497-9391 murrinc.com | email: 2sales@murrinc.com COMPACT MODEL OVERVIEW Input/Output Module IMPACT20-P IMPACT20-DN IMPACT20-C IMPACT20-E IMPACT20-EC IMPACT20-PNIO -digital IP20 protection Ordering Data Art. No. Art. No. Art. No. Art. No. Art. No. Art. No. 16 digital inputs 56900 56908 56904 56916 56912 56920 8 digital inputs, 8 digital outputs 56901 56909 56905 56917 56913 56921 16 digital outputs 56902 56910 56906 56918 56914 56922 Connection SUB-D 9-pole, female Open Style SUB-D 9-pole, male Transfer Protocol Profibus-DP DeviceNet acc. to ODVA CANopen Fieldbus Addressing Transfer Rate RJ45 Ethernet IP EtherCat ProfiNet Rotary Switch Automatic Automatic up to 100MBit/s Full Duplex up to 100MBit/s 10/100MBit/s Full Duplex Rotary Switch up to 12MBit/s 125Kbit/s, 250Kbit/s, 500Kbit/s up to 1MBit/s Supply Voltage Sensor and Actuator Supply Spring Clamp Terminal 2.5mm2 Transfer Protocol 24V DC (18-30.2V), acc. to EN61131-2 I/O Ports Connection Spring Clamp Terminals 2.5mm2 Inputs Single wire connection technology Sensor Supply 24V DC (18-30.2V), acc. to EN61131-2, <= 200mA/port Outputs Semiconductor output short-circuit/overload protected, with 0.5A or max. 2A; Total current 8A Overload Cut-Off channel-related Module Diagnostics Fieldbus RUN-LED Supply Voltage LED, alarm via the bus I/O Overload channel-related LED, group alarm via the bus Dimensions (HxWxD) 117 x 56 x 47mm From the control cabinet... via the interface... passive and active... into the field Murrelektronik has your connectivty solutions Murrelektronik, Inc. | 1327 Northbrook Parkway, Suite 460 | Suwanee, GA 30024 | P: 770-497-9292 | F: 770-497-9391 murrinc.com | email: 2sales@murrinc.com
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertising