design pro led controller

design pro led controller
PROJECT:
TYPE:
ORDERING # :
COMMENTS:
DESIGN PRO LED CONTROLLER – FEATURES
Height = 13.73"
Depth = 4.46"
Width = 8.62"
Height = 14.11” w/Adaptor
Depth = 4.46"
Width = 13.51"
Height = 14.11" w/Adaptor
Depth = 4.46"
Width = 13.51"
15DC100
15DC200
200W/VA
100W/VA
Zones
2 independently controlled zones
4 independently controlled zones
6 independently controlled zones
Weight
5.5 lbs
8 lbs
11 lbs
Description
All-in-one power supply and controller provides
personalization, versatility, and efficiencies to a
professional LED installation.
Potting
Fully encapsulated / potted electronics.
Warranty
Housing & Finish
UV stable and weather-proof polymeric
material with textured gray finish.
Industry-leading warranty.
For details see: landscapelighting.com/warranty
Timer
AC or DC &
Output Voltage
Direct current (DC), 15V constant DC
Integrated astronomical clock programmable
by geolocation.
Input Voltage
108-132AC 50-60 Hz
Stainless
Grade
Corrosion resistant high grade stainless steel
components.
Minimum Load &
Fixture Loading
None. Use Watts (not VA) to load fixtures
on controller.
Efficiency on
Primary Power
Side
Min 90% (power-in, power-out)
Grounded Cord
Type/Length
66" of usable #18-3 SJTW Cord.
UL Listing & FCC
ANSI/UL 1838 CSA 250.7. FCC Part 15B
Battery
Back-up
Saves date and time only. All other settings
saved to nonvolatile memory.
Outdoor/Indoor
Use
Wet Location Rated. Indoor acceptable by
local code.
Terminal Lugs
Can fit #8-18 GA.
Transformer
Type
Electronic DC (low ripple and acceptable for use
LED Landscape fixtures).
Breaker Protection
Type/Amps.
Electronically controlled 7 Amp.
System
Information
Calculates live watts and amperage
within zone summary.
Surge
Protection
Primary surge protection protects against surges
going down the line.
Overload
Protection
Yes
Event Schedules
Up to 12 programmable schedules.
Menu Diagnostics
Yes, to aid in troubleshooting common problems.
Vandal Resistant
Yes, with integrated locking tab (lock not included).
Temperature
Range
Operates at -40° F to 140° F (-40° C to 60° C)
Conduit
Adaptor
1" trade size PVC slip fit conduit adaptor for a
clean and professional installation. Can also
accept 1.25" trade size PVC conduit.
Mounting
Hardware
Included. Integrated easy-positionable keyhole
mounts allow for a simple installation.
Wireless Type
& Range
Z-Wave® See www.z-wave.com for additional
options. 250ft line of sight range.
Network
Multiple controllers can be wirelessly synced
together to create a network (maximum 4
controllers in one network). Multiple networks
can be set-up in installations with more than
4 controllers.
GENERAL SPECIFICATIONS
MORE
300W/VA
15DC300
Wattage (VA)
PROJECT:
TYPE:
ORDERING # :
COMMENTS:
DESIGN PRO LED CONTROLLER – ACCESSORIES
Length = 3.93"
Width = 1.33"
Length = 1.83"
Width = 1.83"
16080BK Remote
16081WH Range Extender
EZPull
250’ Boxes
16088WH – #14-2
16089BK – #16-2 Wire
Now 14 and 16 guage direct burial
wire can now be used with Kichler’s
Design Pro LED Controller. Available
in 250’ EZ Pull boxes for added
convenience. To be used only with
the Kichler Design Pro LED Controller.
See Kichler DC voltage drop calculator
to calcualte wire runs.
Description
Allows the user to independently
control lighting zones based on
pre-defined programs. This enables
the homeowner to temporarily
override schedules on individual
zones by turning the lights on/off at
any given time. Can also be used as a
secondary programmer.
Allows for wireless range extension
between wireless devices (ex. power
supply-to-power supply) Plugs into any
standard 120V outlet (dry location).
Input
Voltage
Internal lithium battery charges via provided USB cable.
108-132AC 50-60 Hz
N/A
UL Listing
NA, battery powered.
UL listed for dry location: must be
used indoors or put in an approved
enclosure.
UL listed for 12V outdoor lighting
applications. UV stabalized PVC
insulated. For direct burial.
Wireless
Type
Z-Wave®
See www.z-wave.com for additional
options.
Z-Wave®
See www.z-wave.com for additional
options.
N/A
Notes
Add/remove devices, create scenes,
and control an entire Z-Wave network
with one remote.
Amplifies Z-Wave wireless signals.
Ranges differ depending line of sight
and interior building materials used.
Use proper direct burial connectors
with the approved cable combinations.
Z-Wave is a registered trademark of Sigma Design and its subsidiaries in the United States and other countries.
MORE
PROJECT:
TYPE:
ORDERING # :
COMMENTS:
WIRE GAUGE / LENGTH / WATTAGE CHART
Length of Wire Shown in Maximum
Feet/Meters
10 GAUGE WIRE
1,860 ft / 567 m
0-20W
930 ft / 283 m
40W
620 ft / 189 m
60W
470 ft / 143 m
80W
370 ft / 113 m
100W
Length of Wire Shown in Maximum
Feet/Meters
12 GAUGE WIRE
0-20W
1,150 ft / 351 m
40W
580 ft / 177 m
60W
390 ft / 119 m
80W
100W
Length of Wire Shown in Maximum
Feet/Meters
14 GAUGE WIRE
0-20W
80W
100W
370 ft / 113 m
240 ft / 73 m
180 ft / 55 m
140 ft / 43 m
16 GAUGE WIRE
0-20W
40W
60W
80W
100W
Length of Wire Shown in Maximum
Feet/Meters
730 ft / 233 m
40W
60W
Length of Wire Shown in Maximum
Feet/Meters
290 ft / 88 m
230 ft / 70 m
450 ft / 137 m
230 ft / 70 m
150 ft / 46 m
110 ft / 34 m
90 ft / 27 m
18 GAUGE WIRE
0-20W
40W
60W
80W
100W
290 ft / 88 m
140 ft / 43 m
90 ft / 27 m
70 ft / 21 m
50 ft / 15 m
NOTE: Distances are maximums based on 5V drop.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising