H.264 16 CH Digital Video Recorder
4
Record Data (Playback and Backup)
In this page, the data can be search or backup according to
channel, recording type, and time duration. The file is available
for .ifv or .avi format while backup.
Playback
Channel
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Type
Manual
Duration
Alarm
MTD.
SCH.
★Under the live viewing mode, press MOUSE (Right Button) to
enter the Quick Menu.
★Under the Main Menu Mode, press MOUSE (Left Button) to enter
Selection.
★Under the Menu mode, press MOUSE (Left Button) to go to the
Sub-Menu.
★Click right button to leave current submenu.
★On the Sub-Menu page, click the mouse or virtual keyboard
change setting.
2010-04-01 18:00:00
HDD Support List
2010-04-02 23:59:59
Suggest to install the Hard Driver listed below to make sure
the compatibility.
Store To
U-Disk
Search
BRAND
Play by Time
MODEL NUMBER
ST3250310CS
ST3320410SV
ST3500312CS
ST3750528AS
ST31000424CS
ST31500541AS
ST32000542AS
HCT721025SLA380
HCT721032SLA380
HCP725050GLA380
HCT721010SLA360
WD3200AVVS
WD3200AAKS
WD5000AVVS
WD10EVVS
WD2001FASS
SEAGATE
Backup
Menu Operation On OSD, Panel Control, Remote Control And Mouse
Menu Operation
Front Panel & Remote
Control Operation
Mouse
Select character from
virtual keyboard
[UP/Down/Left/Right]
[Move Cursor]
Key in the select character
[Enter]
[Left Click]
[MENU & ESC]
[Right click]out of
selection area
Exit the virtual keyborard
Stop
Lock
Record
Play
Step/Pause
Fast Rewind
Slow Forward
Fast Forward
Zoom in /out
PTZ Setup
Mute
Auto Switch
Up Selection
Left Selection
MENU
Down Selection
9 Disivion Display
Quad Display
PTZ IRIS
PTZ Focus
Search
Information
Enter
Right Selection
Cancel
13 Disivion Display
16 Disivion Display
Number 0-9,
Channel 1-16(Switchable)
Virtual Keyboard Operation
Using the virtual keyboard to enter words/numbers.
Description of Virtual Keyboard
B
I
P
W
C
J
Q
X
D
K
R
Y
E F G
L M N
S T U
Z
HITACHI
WD
CAPACITY
250G
320G
500G
750G
1T
1.5T
2T
250G
320G
500G
1T
320G
320G
500G
1T
2T
H.264 16 CH Digital Video Recorder
Quick Operating Instruction
2010 May. V1.0
Linux
16CH
H.264
USB Flash Disk Support List
Remote Controller
A
H
O
V
5
USB Mouse Operation
Num
Press to select ''Capital letter''
123
Press to select ''Number''
abc
Press to select ''Lowercase letter''
,
Press to select ''Symbol''
The following recommended flash drives have passed all testing
procedures and are safe to a:backup, b:Playback by PC, and
c:update firmware.
UNIT:GB
BRAND
1
4
8
16
32
LAN
480fps
XGA
Audio
RCA
SATA HDD
LAN H.264
SPEED
DVD/ RW
Extending
IR Lead
DOME
USERS
SATA HD
BNC
ALARM
GUI
MOTION
2 Way
Remote
Audio
Optional
Transcend
Adata
Before Power Up The System
SONY
SanDisk
Kingston
Systems Setting
★Connect camera to DVR with BNC connectors
Recommend using RG-59 Coaxial Cable or above.
★DVR Network Installation
Please connect DVR to HUB or router by using RJ-45 network
cable and make sure the DVR network indicator LED is on.
( Please refer to manual【7.2.7 Network Setup】for further
network setting information of using static IP,PPPoE or DHCP.)
★Alarm Installation
Please refer to manual【3. Rear Panel】for external alarm I/O
installation.Please refer to manual【7.2.4 Alarm In】&【7.2.5
Alarm Out】for further Sensor setting.
★Speed Dome Installation
The DVR supports a variety of PTZ cameras and 3 types of
communication protocol(Pelco D, Pelco P, MIKAMI).
★Power Installation
Please use the provided power cable and adaptor to connect the
DVR ( AC100V ~ AC230V ). Please refer to manual【3. Rear
Panel】. The DVR system will enter into live viewing mode when
power is connected. Please refer to manual【6. Display Setup】.
H12A1648F1
★Please install the SATA HDD and connect all of SATA power
lead & data cable before switch on the machine, otherwise the
system will not record normally.
★It is able to install HDD at any position of SATA If only one HDD
installed.
After Power Up The System
★The system boot up will take up to 1-2 minutes. Please be
patient.
★Please login your Account(admin) into system and set User
Account/Password. HDD format when being installed.
(After formatting the system will start recording automatically.)
Accessory
★Quick Reference x 1pcs
★Power Cord x 1 pc s
★HDD Screws x 8pcs
★Manual CD x 1pcs
★Remote Control x 1pcs
★Mouse(Optional)
2
1
Front Panel
3
2. Setup:Setup、Record、Video、Alarm in、Alarm out、
Schedule、Network、PTZ、MTD.
Installation
(2)
(3)
(5) (9)
(6)
(7)
Setup
Setup
MENU
Stop
Manual Record
Pause
Step Forward
Fast Forward
Slow Forward
UP
DOWN
LEFT
RIGHT
(1)
(8) (10)
3.VIDEO OUT:Video output(BNC).
menu under the playback mode.
4.AUDIO OUT:Audio output( RCA).
Press the Manual Record button to start
recording under the live mode.
5.AUDIO IN:1~4CH audio input. ( CH 4 is for external input )
To pause the playback under the playback mode.
6.ALARM:Includes 4 DI and 2 DO. ( Default N.O. )
To playback frame by frame in each time
7.AC IN : Power input. (115V-230V)
Under the live viewing mode, press the Play
button to enter the playback mode.
Forward speed: x2 / x4 / x8 / x16
Slow forward speed: 1/2、1/4、1/8
To move up of the selection setting in menu.
Under the live mode of Single/Quad/9 splits, use
the button to control video display.
To move down of the selection setting in menu.
Under the live mode of Single/Quad/9 splits, use
the button to control video display.
To move left of the selection setting in menu.
Change to Single/Quad/9/13/16 splits under the
live viewing mode.
To move right of the selection setting in menu.
Change to Single/Quad/9/13/16 splits under the
live viewing mode.
Press the Enter button to confirm the setup or go
into sub-menu.
Exit To exit the system.
Power Indicator The LED will light on when power on.
1.USB Mouse Port:1.0 USB mouse.
Schedule
2.VIDEO IN:1~16 CH video input (BNC).
POWER
HDD
HDD Indicator LED ON when data recording is in progress.
ALARM
Alarm Indicator LED ON when the alarm is triggered.
Network Indicator The LED will light on when network connected.
The LED ON when the buttons on front panel or
Status Indicator
mouse operating malfunction or video loss.
Quad/9/16 display Quad/9/13/16 splits under the live viewing mode.
Under the live viewing mode, press the button to
Auto Switching
start/stop the auto switching function.
For USB 2.0 flash memory stick to backup and
USB 2.0 Slot
firmware update.
NETWORK
STATUS
Alarm in Alarm out
Network
PTZ
MTD.
Device ID, Language, HDD overlay etc.
3. Log: Allow user to check system login、remote site
login、alarm and system operation history.
Log
Type
Local Opa
8.XGA:LCD monitor output.
9.LAN:RJ45 network connection.
10.RS-485:RS-485 connection, for speed dome use.
Search
Duration 2010-03-31 00:00:00
2010-04-02 23:59:59
Time
Info
Index
1
2
3
4
2010-04-02
2010-04-02
2010-04-02
2010-04-02
15:04:58
15:04:23
15:04:22
15:04:21
001 / 001
Goto
System Parameter
Stop Video->Channel 8
Stop Video->Channel 16
Start Video->Channel 15
11.Power Switch:DVR main power switch.
4. Log out:To Log out、Restart the system.
System Operation
Log Out
★Menu: Tools、Setup、Log、Log Out.
Restart
Menu
Log out
Restart
Quick Setup for Manual Recording
Tools
Setup
Log
Log Out
HDD management, user management, software upgrade, time setting and clear alarm.
Enter
LOCK
Video
(11)
Under the live viewing mode, press MENU
to enter the main menu.
Under the menu mode, press MENU to go
to the upper menu.
To stop the operation or go to the upper
under the pause mode during the playback.
Play
(4)
Record
1. Tools:HDD、User、Default、Clear、Upgrade、Time、Info.
Select the channel for manual recording; this page contents
each camera status, operation and indicator as follows:
:No Record.
1.
:Record.
2.
:No Record, Internet Monitoring.
3.
:Record and Internet Monitoring.
4.
Tools
Record
Channel
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Status
HDD
User
Default
Clear
Set
Channel
Status
Upgrade
Format HDD
Time
Info
Set
Start All
Stop All
Exit
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising