TRMS AC, DC, AC+DC digital multimeters To order State at delivery

TRMS AC, DC, AC+DC digital multimeters To order State at delivery
TRMS AC, DC, AC+DC digital multimeters
Category IV for safety,
versatility for use in the field
IP
54
600 V CAT IV
C.A 5271
Display
C.A 5273
6,000 counts
Bargraph
61 + 2 elements
Acquisition
C.A 5275
2 x 6,000 counts with backlighting
61 + 2 elements, dual mode (full scale/central zero)
TRMS AC /DC
Measurement range
C.A 5277
TRMS AC / DC / AC+DC
5 measurements / second
Autorange / Deactivatable
Yes / No
Automatic AC /DC detection
Ranges
Yes / Yes
Yes
No
600 mV / 6V / 60V / 600 V / 1,000 V
60 mV / 600 mV / 6 V / 60 V / 600 V / 1,000 V
V DC
Typical accuracy
0.2 % + 2 cts
0.09 % + 2 cts
Resolution
0.1 mV to 1 V
0.01 mV to 1 V
V AC
600 mV / 6 V / 60 V / 600 V / 1,s000 V
60 mV / 600 mV / 6V / 60 V / 600 V / 1,000 V
Resolution
0.1 mV to 1 V
0.01 mV to 1 V
Bandwidth
40 Hz to 3 kHz
40 Hz to 10 kHz
VLow AC (low impedance
+ low-pass filter)
V AC + DC
Ranges
Ranges
600 mV / 6V / 60V / 600V / 1,000 V
Resolution
0.1 mV to 1 V
Ranges
60 mV / 600 mV / 6V / 60 V / 600 V / 1,000 V
Resolution
0.01 mV to 1 V
Ranges
A DC
A AC
A AC + DC
Resistance
Audible continuity
6 A / 10 A (20 A / 30 s)
6,000 µA / 60mA / 600 mA / 6 A / 10 A (20 A / 30 s)
0.001 A to 0.01 A
Resolution
1 µA to 0.01 A
Ionization current: 0.2 µA to 20.0 µA
Ranges
6 A / 10 A
Resolution
6,000 µA / 60 mA / 600 mA / 6 A / 10 A (20 A / 30 s)
0.001 A to 0.01 A
1 µA to 0.01 A
Ranges
6,000 µA / 60 mA / 600 mA / 6 A / 10 A (20 A / 30 s)
Resolution
1 µA to 0.01 A
Ranges
600 Ω / 6,000 Ω / 60 kΩ / 600 kΩ / 6 MΩ / 60 MΩ
Resolution
0.1 Ω to 0.1 MΩ
Yes
Test diode
Hz
Capacity
T°
Hold
Yes
Ranges
600 Hz / 6 kHz / 50 kHz
Resolution
0.1 Hz to 10 Hz
Ranges
6 nF / 60 nF / 600 nF / 6 µF / 60 µF / 600 µF / 6 mF / 60 mF
Resolution
-59.6 °C to +1,200 °C
-4 °F to +2,192 °F
Ranges
Resolution
0.1° to 1 °
0.1° to 1 °
No
Peak+ / Peak- (1 ms)
Yes
Differential measurement (X) / Relative (DX/X%)
Automatic power-off
No
Yes
No
Yes
Yes (deactivatable)
Power supply
1x9V
Dimensions / Weight
90 x 190 x 45 / 400 g
C.A 5270 multimeter delivered with a set of banana leads, a set of test probes, a 9 V battery and
a CD containing the operating manual and the start-up guide.
C.A
C.A
C.A
C.A
To order
-59.6 °C to +1,200 °C
-4 °F to +2192 °F
Hold
Min / MAX (100 ms)
State at delivery
0.001 nF (1pF) to 10 µF
5271
5273
5275
5277
standard state
with additional
with additional
with additional
at delivery
K thermocouple temperature sensor
bag and Multifix adapter
K thermocouple temperature sensor, bag and Multifix adapter
C.A 5271 TRMS AC/DC multimeter
P01196771
C.A 5273 TRMS AC/DC multimeter
P01196773
C.A 5275 TRMS AC+DC multimeter
P01196775
C.A 5277 TRMS AC+DC multimeter
P01196777
11
Universal Testing and Measurement
Digital multimeters
IP 67
The MX 57Ex is certified ATEX & IECEx
and can be used in both explosive and
non-explosive environments.
The MX HD range of IP 67
multimeters fulfils the requirements
for difficult environments.
They are totally protected against:
- dust
- the effects of temporary immersion
MX0022-Z
MX0024-G
MX 24B
MX 44HD
MX 58HD
MX 59HD
MX 57Ex
4,000 counts
5,000 counts
4,000 counts
5,000 / 50,000 counts
50,000 counts
50,000 counts
Type of measurement
AVG
TRMS
AVG
DC voltage
600 V
1,000 V
1,000 V
600 V
750 V
750 V
Bandwidth
500 Hz
1 kHz
1 kHz
Reference
Display
Bargraph
AC voltage
MX0044HD
MX0058HD
Yes
MX0059HD
MX0057CX
Analogue, 34 segments, 20 meas./s
TRMS AC & AC+DC
5 calibres from 500 mV to 600 V
50 kHz
5 calibres from 500 mV to 600 V
100 kHz
50 kHz
500 µA, 5 mA, 50 mA and 500 mA
400 µA,
4-40-400 mA,
4 A, 10 A
500 mA/10 A
40 mA/10 A
Frequency
4 MHz
500 kHz
–
Range from 0.62 Hz to 500 kHz
Resistance
40 MΩ
50 MΩ
6 ranges from
400 Ω to 40 MΩ
6 ranges from 500 Ω to 50 MΩ
Detection threshold from 10 Ω to 20 Ω - resp. time 1 ms
AC/DC current
other measurements
Audible continuity
Diode test
Capacitance
Temperature
Other measurements
Protection rating
Safety
Dimensions
Weight
State at delivery
12
MX 22
< 40 Ω
10 to 20 Ω
20 to 40 Ω
0à4V
0 to 2 V
0 to 3 V
–
50 nF to 50 mF
4 nF to 40 µF
–
–
–
Min / Max
Min / Max
5 mA, 50 mA
500 mA, 20 A (30s)
20 A (30s)
from 0 to 2 V
7 ranges from 50 nF to 50 mF
-200 °C to +800 °C / Pt100 and Pt1000 probes
–
Duty cycle
– dB function
Duty cycle
IP 40
IP 67
Duty cycle
– dB function and U2/R
resistive power
Pulse width – timer
Event counting
CAT III 600 V
CAT III 600 V
IEC 61010-1
CAT IV 600 V
170 x 80 x 35 mm
189 x 82 x 40 mm
230 x 155 x 65 mm
ATEX 94/9/CE directive,
EN/IEC 60079-0-EN:
IEC 60079-11,
EN/IEC 61241-11-EN/IEC
61241-0,
EN/IEC 61010-1-600 V
CAT III, CE inspection
certificate type LCIE 02
ATEX 6005X &
additional clauses
01, 02, 03, 04
189 x 82 x 40 mm
300 g
400 g
500 g
400 g
Elastomer sheath, set of 2 safety
leads, 9 V battery (installed),
verification certificate and
operating manual
Set of safety test-probe
leads, protective
sheath, 2 x 1.5 batteries,
2 fuses installed and
operating manual
Set of PVC safety
test-probe leads,
protective sheath,
9 V battery, 2 fuses
installed and
operating manual
Set of silicone safety
test-probe leads,
protective sheath,
9 V battery, 2 fuses
installed and
operating manual
Carrying case, set
of safety test-probe
leads, 1 spare
intrinsic-safety fuse,
operating manual
Digital multimeters
MTX Mobile range
MTX 3283
MTX 3282
MTX 3281
Multimeters in the MTX Mobile family:
Direct one-handed access to the functions thanks to the electronic measurement switch
• Large orientable graphic LCD screen • Dedicated "A" or "V" measurement terminals allowing
automatic selection of the corresponding function, in mode AC +DC with automatic range by default
• Optical RS232 and USB ports, BlueTooth port
Reference
Display resolution
Analogue display
Graph of measurements over time
Backlighting / Auto power-off
TRMS measurements
Basic accuracy for DC voltage
Bandwidth
AutoPeak for crest factor
Measurements available
AC & DC voltage ranges
Basic accuracy for AC voltage
AC & DC current
Basic accuracy for DC / AC current
Single A terminal / simultaneous U & I
Resistance / Continuity test
Frequency / Period / Duty cycle
Pulse width / Metering
Capacitance / Diode test
Temperature Pt100/1000 / J/K TC
dBm / Resistive power
U & I peak / Crest factor
Measurement processing
Display hold
Min / Max / Avg monitoring
Relative measurements
Measurements of physical quantities
Measurement storage
Time/date-stamping
SPEC function
Interfaces (depending on model)
Measurement processing
EMC / Safety
V/A selection / Input alarm
Orientable protected display
Electronic switch
Protected battery/fuse access
"Closed-case" software calibration
See below
1 or 4 simultaneous displays of 100,000 counts each
Fast bargraph associated with the graph or the digital measurements
automatic display of the measurements from the last 60 s
backlighting time adjustable from 10 s to permanent / Activatable by the user
AC & AC+DC for voltages and currents
0.02 % +8 D
0.03 % +8 D
0.1 % +8 D
200 kHz
100 kHz
50 kHz
detection and automatic management of the crest factor of the signals measured
ranges from 100.000 mV to 1,000.00 V
0.3 % +40 D
0.7 % +40 D
ranges from 1,000.00 mA to 20.000 A
0.08 % +8 D / 0.3 % +30 D
0.08 % +8 D / 1 % +30 D
automatic ranges on single A terminal, 1 fuse / using 3 leads
Ranges from 1000.00 Ω to 50.000 MΩ / 5 ms fast continuity test
0.6200 Hz to 2.000 MHz / yes / yes
100 μs to 12.5 s / 99,999
no / no
ranges from 10.00 nF to 10.00 mF / from 0 to 2.6000 V
yes / yes
no / yes
yes / yes
no / no
periodic or single peaks lasting 250 ms min. / calculation of signal crest factor
0.3 % +40 D
Manual (Hold) Or Automatic On Stable Measurement (AutoHold)
calendar date and time
relative date and time
absolute deviation, deviation in % and reference / display of frequency and deviation in dB
"Favourite measurement" key , scaling and physical unit
6,500 measurements + graph
4 x 150 measurements + graph
calendar date and time
relative date and time
display of the instrument’s tolerances for each type of measurement
insulated optical RS232 / insulated optical USB / wireless BlueTooth (100 m without obstructions)
emission and immunity as per EN61326-1 / IEC61010 Cat. IV-600 V, Cat. III-1,000 V
automatic according to lead position / buzzer and visual alarm for A
use on benchtop or worn on belt (hands-free) / protection during transport
no more mechanical failures / all-round safety management
separate compartments with mandatory disconnection of leads
optimization of adjustments (optional SX-MTX328x calibration software)
State at delivery
References
MTX3281B: MTX 3281 delivered with 1 set of banana leads Ø 4 mm,
3 x LR6 batteries, HRC fuse, 10 x 38 mm 1,000 V-T11A-20 kA, and
an abbreviated operating manual in 5 languages
MTX3281B-COM: MTX3281B + USB cable and SX-DMM software
MTX3282B-COM: MTX3282B + USB cable and SX-DMM software
MTX3283B-COM: MTX3283B + USB cable and SX-DMM software
MTX3282B: MTX 3282 delivered with 1 set of banana leads Ø 4 mm,
3 x AA NiMH rechargeable batteries with mains adapter/charger, HRC fuse,
10 x 38 mm 1,000 V-T11A-20 kA, and an abbreviated operating manual in
5 languages
MTX3281B-BT: MTX3281B + Bluetooth and SX-DMM software
MTX3282B-BT: MTX3282B + Bluetooth and SX-DMM software
MTX3283B-BT: MTX3283B + Bluetooth and SX-DMM software
MTX3283B: MTX 3283 delivered with 1 set of banana leads Ø 4 mm,
3 x AA NiMH rechargeable batteries, HRC fuse, 10 x 38 mm
1,000 V-T11A-20 kA, and an abbreviated operating manual in 5 languages.
MTX3281B-P: Delivered in hard case with HX0052 "hands-free" kit
and 1 MN09 current clamp, 1 set of 2 crocodile clips, 1 set of 2 hook
wire-grips, 1 CD-Rom containing the operating manuals in 5 languages
MTX3282B-P: Delivered in hard case with HX0052 "hands-free" kit and
1 K-thermocouple probe adapter, 1 USB cable and SX-DMM acquisition
software, 1 set of 2 crocodile clips, 1 set of 2 hook wire-grips, 1 CD-Rom
containing the operating manuals in 5 languages
MTX3283B-P: Delivered in hard case with HX0052 "hands-free" kit and
1 banana lead with clamp for SMD components (HX0064), 1 USB cable
and SX-DMM acquisition software, 1 set of 2 crocodile clips, 1 set of 2 hook
wire-grips, 1 CD-Rom containing the operating manuals in 5 languages
13
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising