Cordless Kettle - NT International
Cordless Kettle
1.7 Litre Capacity
240V~50Hz 1850-2200W
Product Use, Care and
Service Instructions
Read and follow all the instructions in this “Use and Care” leaflet even if you feel you are
familiar with the product. Keep in a safe place for future reference.
For your convenience record the complete model number (located on the product
identification plate) and the date you received the product, together with your purchase
receipt and attach to the warranty and service information card. Retain in the event that
warranty service is required.
When using any electrically powered product, basic safety precautions should
always be followed, including the following:
WARNING - to reduce the risk of fire, electrical shock or injury to persons or property:
• Always operate the product from a power source of the same voltage, frequency
and rating as indicated on the product identification plate.
• This appliance is not intended for use by persons with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
• Keep out of reach of children.
• Do not operate any product with a damaged cord or plug, or after the product
malfunctions, or is dropped or appears damaged in any way. Return the complete
product to the place of purchase for inspection, repair or replacement.
• To reduce the risk of electric shock, do not immerse or expose any of this appliance
to any liquid/water.
• Switch off and unplug from outlet before filling, emptying, or when not in use, and
before cleaning.
• Always keep kettle level when switched on.
• Do not overfill. If the kettle is overfilled beyond the Maximum fill mark, there is a risk
that boiling water may be ejected from the spout.
• CAUTION: Only operate the kettle on a flat surface. Do not operate the kettle unless
the element is fully immersed. Do not move the kettle while it is switched on.
• Do not boil unless the lid is firmly closed.
• Never leave a product unattended when in use.
• Do not let the power cord hang over the edge of work surface, table or touch any
hot surface.
• Do not operate or place any part of this product on or near any hot surface (such as
a gas or electric burner or hotplate or in a heated oven).
• Avoid touching hot surfaces, use handles and knobs.
•Use only with the power lead provided with this kettle.
•This product is intended for normal domestic/household use only.
•The appliance is not intended to be operated by means of an external timer or
separate remote-control system.
•With the power switch in the “OFF” position and the kettle removed from power
cord, fill the kettle to the desired level. Do not fill above the MAX mark. The first time
the kettle is used, or it has been unused for a long period of time, it is recommended
that the kettle be rinsed, filled to maximum and boiled. The water should then be
discarded, the kettle rinsed and refilled with cold water.
• Do not use the kettle below the Minimum mark.
• Before operating the kettle ensure that the kettle is filled to the Minimum mark.
•Ensure the kettle is in the “OFF” position (switch up) before connecting to the power
•To start the kettle heating, push the switch to the “ON” position (switch down). The
power indicator light will glow.
•When the water has boiled the kettle will switch “OFF”. If required, the water may be
brought back to the boil by pressing the switch to “ON”.
•The kettle may be switched “OFF” at any time by pressing the switch on the handle
to the “OFF” position.
•IMPORTANT: Make a habit of switching the power “OFF” at the power outlet before
removing or replacing the kettle on the base or when the kettle is not attended.
•Do not use hot tap water to fill the kettle. Use only cold water. Allow the cold water
to run for three to four seconds before filling the kettle.
•If any plastic taste from the kettle is found it can be removed by filling the kettle
to maximum and adding a teaspoon of bicarbonate of soda to the water. Boil and
discard the water, rinse out with cold water.
An automatic cutout is fitted for protection against boil-dry overheating. It will operate if
the kettle is switched on when containing insufficient water. If this should occur, switch off
and remove the power cord from the power outlet. Allow the kettle to cool for 10 minutes
then refill with cold water and connect to power supply.
•Avoid the use of solvents, polish, abrasive or aerosol cleaners as they may damage
surfaces of the product. The inside of the kettle may be cleaned using a mild
detergent; however it must be thoroughly rinsed before re-use. Clean the exterior
of the kettle by wiping with a slightly dampened soft cloth. Make sure the kettle is
thoroughly dried before reconnecting to the power supply.
NOTE: Do not immerse the base or kettle in water or any other liquid.
•Furring up is a common problem in hard water areas, and it is recommended to
descale the kettle regularly. To descale, purchase a descale product for kettles,
follow the given instructions for the descaler.
•Do not operate the kettle with a damaged cord or plug, or after the kettle
malfunctions, or appears damaged in any manner. Return the complete kettle to the
place of purchase or address noted in warranty information for inspection.
CAUTION: To reduce the risk of electric shock, do not dis-assemble the product. No user
serviceable parts inside. Refer all service to an authorised service facility.
Cordless Kettle
1.7 Litre Capacity
240V~50Hz 1850-2200W
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF