DM6010 - Wilkerson Instrument Co., Inc.

DM6010 - Wilkerson Instrument Co., Inc.
DM6010
AC TRUE RMS INPUT, ISOLATED
FIELD RANGEABLE TRANSMITTER
FEATURES
·
Spans from 0.16 V rms to 256 Vrms ·
·
Selectable Response Time & Filter
·
Plug-In Terminal Blocks
·
Standard DIN-Rail Mount with Easy
Snap-On Snap-Off
·
User-Settable Input and
Output Ranges
Fully Labeled Jumper Positions
for Easy Range Settings
·
Connections and Ranging
Readily Accessible from
the Front
·
Choice of Power Options
·
User Write-On Label
·
Permanent Warranty
DESCRIPTION
The DM6010 provides an isolated
voltage or current output proportional
to the RMS value of an AC voltage or
current input. The true RMS
measurement capability allows
accurate measurements of distorted
sine wave sources as well as complex
wave shapes such as a phase angle
modulated SCR drive output.
All Wilkerson products are designed
with RFI filters and lightning protection
to reduce susceptability to electrical
noise and damage by lightning. It
utilizes a feedback VCO to develop a
pulse train with a duty cycle
proportional to the input signal
amplitude. This pulse train is coupled
through a pulse transformer to the
output circuitry, where the duty cycle
data is converted to a proportional DC
output level.
Connections are made via two 4-pin
plug-in terminal blocks. These terminal
blocks allow the product to be removed
without unwiring the connections.
OUTPUT
Voltage
0/.25
0/1
1/5
0/5
0/10
-5/+5
-10/+10
OPERATING TEMPERATURE
14 to 140 °F/-10 to +60 °C
TYPICAL APPLICATIONS
Useful for measuring and control,
accurate AC measurements, and data
acquisition.
SPECIFICATIONS
INPUT
Span
Voltage
0.016 V to 256 V
Current
0.8mA to 100 mA
Frequency
47 Hz to 1000 Hz
SPAN ADJUSTMENT
+5% to -55% of selected range
ZERO ADJUSTMENT
50% elevated
INPUT IMPEDANCE
Voltage
1 megohm
Current
20 ohms
CREST FACTOR
PEAK/RMS + 6.3 max
(±1% accuracy)
Current (mA)
0/1
0/4
4/20
0/20
OUTPUT LOGIC
Normal or Reverse Acting
TEMPERATURE STABILITY
±(0.01% of span) /°C
POWER
Standard
115 VAC + 10%, 50/60 Hz
230 VAC + 10%, 50/60 Hz
Optional
115/230 VAC Selectable
±10%, 50/60 Hz
24 VAC + 10%, 50/60 Hz
24 VDC (21 to 32 VDC)
12 VDC (10 to 16 VDC)
DRIVE CAPABILITY
Voltage: 5 mA
Current: >24 Compliance
OUTPUT RIPPLE (Peak-to-Peak)
<0.1% of full scale
ISOLATION
Resistance
>500 megohms
Voltage Rating
>1000 VAC rms Sinewave
ACCURACY
±0.3% of span
Wattage
2.5 W max
*
For inputs above 100 mA, use
P/N689 0.1 ohm Shunt.
DM6010
ORDERING
INFORMATION
Wilkerson Instrument Co., Inc.
POWER
115 VAC, 50/60 Hz Power
230 VAC, 50/60 Hz Power
24 VAC, 50/60 Hz Power
24 VDC Power, Transformer Isolated
12 VDC Power, Transformer Isolated
INPUT
Select Units
VAC
mAAC
AAC
Enter Input
Zero Scale
Copy and Fax to Place Order.
OPTIONS
Conformal Coating
TAGS
Specify Tag Numbers
Tag number is typed on product label
at no charge.
Enter Tag Number(s)
Full Scale
OUTPUT
Select Units
VDC
mADC
Enter Output
Zero Scale
Full Scale
ACCESSORIES
DM6010
DR1
DIN-Rail, 35 mm Symmetrical, 39 inches (1 meter)
DIMENSIONS
Inches [mm]
QTY _____
CONNECTIONS
TERM HI V
TERM Common
TERM Common
TERM LO V /CUR
TERM Output +
TERM Output TERM L1
TERM L2
High Range Input
Input Common
Input Common
Low Range Input
Output +
Output Power AC L1 or DC +
Power AC L2 or DC -
www.wici.com · Email: sales@wici.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising