Bogen | CSD1X2NBU | Datasheet | Bogen CSD1X2NB loudspeaker

Drop-In Ceiling Speaker
CSD1X2NB & Variations
(Exposed Driver without Back Can)
Bogen’s CSD1X2NB Drop-In Ceiling Speakers
are full-range speakers that allow for fast and
easy installation. Just make one simple cut to
the ceiling tile, lay the support rail crossbar
(included) across the ceiling grid, and drop the
speaker into place.
• Finely perforated grille over the entire front of speaker
• Fully enclosed, industrial grade steel construction
• Exposed driver without back can
SUPPORT RAIL CROSSBAR
(Included)
• 8'' wide range loudspeaker
• Seismic attachment point
CEILING TILE
• 70V/25V, 4-watt transformer (4, 2, 1, 0.5, 0.25, 0.125 watt)
taps; selected by stripped & tinned leads
• Available in off-white and bright white (“U” versions)
grille finish
• ''VR'' versions have a Recessed Volume Control
(front-mounted)
• Support Rail Crossbar (included)
CSD1X2NB
CEILING GRID
Drop-In Ceiling Speaker CSD1X2NB & Variations
(Exposed Driver without Back Can)
FINELY PERFORATED
FINISHED METAL GRILLE
8” SPEAKER
4 WATT 25V/70V
TRANSFORMER
SUPPORT RAIL
CROSSBAR
SEISMIC
ATTACHMENT
POINT
FRONT-MOUNTED
VOLUME CONTROL
(''VR'' VERSIONS)
CSD1X2NB
CSD1X2NBVRU
Recessed Volume
Control (VR)
●
CSD1X2NBU
CSD1X2NBVR
Bright White Finish (U)
CSD1X2NB
Model
Variations
Off-White Finish
S P E C I F I C AT I O N S
●
●
●
●
●
Frequency Response . . . . . . . . . .78 Hz - 16 kHz
SPL @ 1W / 1m . . . . . . . . . . . . . . . 93 dB
Power Taps . . . . . . . . . . . . . . . . . . 4, 2, 1, 0.5, 0.25, 0.125 watts
Dispersion @ 2 kHz
(6 dB down) . . . . . . . . . . . . . . . . . .100°
Cone Material & Surround . . . . . . Treated paper
Cone . . . . . . . . . . . . . . . . . . . . . . . . 8"
Magnet Weight . . . . . . . . . . . . . . . . 6 oz.
Connection . . . . . . . . . . . . . . . . . . . Via wire nuts (included)
Dimensions . . . . . . . . . . . . . . . . . .12-7/8" W x 4-3/4" H x 23-3/4" D
Product Weight . . . . . . . . . . . . . . .7 lb.
70V and 25V compatible.
Architect and Engineer Specifications
The speaker shall be a Bogen Model CSD1X2NB. It shall be a 1 ft. x 2 ft. steel assembly with non-reflective, finished metal grille; damped highcompliance factory-mounted 8" loudspeaker with a treated paper cone; and 70V/25V transformer. Transformer shall have power taps of 4, 2, 1, 0.5,
0.25, and 0.125 watts, selectable by stripped and tinned leads. The 8" main speaker cone shall have a 6 ounce magnet. The back of the assembly will
have an exposed driver without back can. The speaker shall include a seismic attachment point. Output shall be 93 dB @ 1W/1m (min.). Frequency
response shall be 78 Hz - 16 kHz (min.) The speaker shall measure 12-7/8" W x 4-3/4" H x 23-3/4" D. The speaker shall weigh 7 lb. A support rail crossbar shall be included.
For CSD1X2NB: Front grille finish shall be off-white in color.
For CSD1X2NBU: Front grille finish shall be bright white in color.
For CSD1X2NBVR: Front grille finish shall be off-white in color. An easily accessible, front-mounted, recessed volume control shall be included.
For CSD1X2NBVRU: Front grille finish shall be bright white in color. An easily accessible, front-mounted, recessed volume control shall be included.
50 Spring Street, Ramsey, NJ 07446, U.S.A.
Tel: 201-934-8500 • Fax: 201-934-9832 www.bogen.com
Specifications subject to change without notice.
© 2007 Bogen Communications, Inc.
Part No. 54-9279-01C 0902
Download PDF

advertising