Sharpener-X
Easy to Use and Convenient
Sharpener-X
With Cemented Carbide Tip
For Handy Sharpening of
Household Cutting Tools
■ FEATURES
● Super hard and wear-resistant cemented carbide tip.
● Can easily renew the edge sharpness of your household
cutting tools.
■ APPLICATIONS
Edge sharpening of
kitchen and other knives
Edge sharpening of sickles
Edge sharpening of scissors
for gardening
SAFETY PRECAUTIONS
● “Sharpener X” has sharp edges. Do not touch the edge
with a bare hand.
●
● When using the sharpener X, safety gloves and safety
glasses should always be used.
CAUTIONARY POINTS IN USE
● The tip of Sharpener-X is very brittle. It should not be
used for other than sharpening.
● Don't drop Sharpener-X on a hard object. And, don't rap
Sharpener-X with a hard object.
■ HOW TO USE SHARENER X
● As shown in Figure below, contact the Sharpener-X's edge
on the edge surface (rake face) of the tool to be sharpened,
and lightly scrape it several times from your side toward the
tip of the tool edge.
● Don't sharpen the inner edge face of scissors with SharpenerX.
● After using your Sharpener-X, the attached cap should be
put on the tip to prevent edge chipping.
Rake face
Direction of
scraping
Knife
sharpener-X
45°
A
A
45°
Small clearance angle
Sharpener-X
A-A
A-A section
of knife
2-7, Sugasawa-cho, Tsurumi-ku
Yokohama, 230-0027 Japan
TEL: +81-45-503-9040 (For English)
No.040: 06-11
■フリーダイヤル:0120-44-9512
■ホームページ:http://www.tungaloy.co.jp
No.040: 0907 (TJ)
0611(TD)
http://www.tungaloy.co.jp
No.040: 0907 (TJ)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising