DS-1273ZJ-135
DS-1273ZJ-135
Wall Mounting Bracket for Dome Camera
Features:




Order Model:
DS-1273ZJ-135
Aluminum alloy material with surface spray
treatment
Design of cable entrance hole
Better water proof design
Convenient installation coordinating with adaptor
cap
Dimension:
Parameter:
Model
Parameters
Appearance
Range of
Application
Material
Dimension
Weight
DS-1273ZJ-135
Wall Mounting Bracket for
Dome Camera
Hikvision White
Suitable for dome camera wall mounting
Aluminum Alloy
Φ136×183.5×230mm
704g
Notice:



The bracket should be installed on flat wall
The wall must be capable of supporting over 3 times as
much as the total weight of the camera and the mount.
The maximum load capacity of the bracket is 4.5KG
Model Suitable:
DS-2CC52X1P(N)-VP, DS-2CC52X1P(N)-AVPIR2,
DS-2CD2712F-I(S), DS-2CD2732F-I(S)
Installation Step:
① Choose appropriate wall
to install the bracket and
thread the cable
A: Cable entry hole
⑤ Install dome module to
adaptor cap and fix with
screw
② Fix adaptor to bracket and
thread the cable
③ Screw up and complete
the fixation of adaptor
④ Take off lower dome
and lining
⑦ Install lower dome to
module and screw up
⑧ Installation complete
B: Fastening screw
⑥ Install lining to inner module
and adjust view of angle
Note: The actual bracket may vary from the picture above.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising