user manual - Accident Cameras

FULL HD CAR DVR
USER MANUAL
702E
701E
700E
HD 720P
Rear Camera (Optional)
●1080P full HD ●WDR Function (Wide Dynamic Range) ●Lighting Keyboard ●CPL& UV Lens available
Product pictures& Function
a Device Introduction.
700E Device Introduction:
6
7
1
8
2
9
10
3
4
15
16
1. TF Card Slot
4. Lens
7. Charging Light (Red)
10. Mode Button
13. OK Button
16. Holder Connector
19. Reset Button
5
12
13
14
18 19
11
20
17
2. HDMI Port
5. Speaker
8. Menu Button
11. LCD Display
14. Down Button
17. Photo Button
20. Microphone
1
3. LED Light
6. Status Light (Blue)
9. File Protection Button
12. Up Button
15. Power Button
18. USB Port
701E Device Introduction:
3
6
7
1
8
2
9
10
15
1. TF Card Slot
4. Lens
7. Charging Light (Red)
10. Mode Button
13. OK Button
16. Holder Connector
19. Reset Button
4
5
16
17
12
13
14
18 19
2. HDMI Port
5. Speaker
8. Menu Button
11. LCD Display
14. Down Button
17. Photo Button
20. Microphone
2
11
20
3. LED Light
6. Status Light (Blue)
9. File Protection Button
12. Up Button
15. Power Button
18. USB Port
702E Device Introduction:
3
6
7
1
8
2
9
10
15
1. TF Card Slot
4. Lens
7. Charging Light (Red)
10. Mode Button
13. OK Button
16. Holder Connector
19. Reset Button
4
5
16
17
12
13
14
18 19
2. HDMI Port
5. Speaker
8. Menu Button
11. LCD Display
14. Down Button
17. Photo Button
20. Microphone
3
11
20
3. LED Light
6. Status Light (Blue)
9. File Protection Button
12. Up Button
15. Power Button
18. USB Port
2
3.0 Holder Introduction:
1.Power Input
2.3M Sticker for Holder
1
3.Holder connect with Device Port
3
2.0 Holder Introduction:
1.Power Input
1
2.Holder connect with Device Port
2
Note: Only one Holder for one Device, the details please check package
4
b. Button Function
Power Button
Press this button for 2~3 sec. to turn on/ off the device
Photo Button
In video mode, press this button to take picture
In playback mode, when replaying video, press this button to take picture from current video
Reset Button
When the device crashed, press this button to shut down the device
Menu Button
Press this button during standby status or playback mode, menu list of current mode will appear
When the device is recording, press this button to set the flash light status(auto/off/on)
File Protection Button
In video mode, press this button to set the recording video to be protected manually, so as to prevent it from being
overwritten by loop recording
When file protection is active, the icon will appear on LCD display
Mode Button
The device only have two mode, video mode and playback mode
Press this button during standby status, can switch device in video mode and playback mode.
When the device is in recording, press the button to open/close the display
Up Button
Press this button during standby status or video mode to switch dual camera mode( while connect rear camera
effectived)
In menu setting, press this button to up item
In playback mode, press this button to choose previous file
In playback mode, when playing video file, press this button to backward playing
5
OK Button
In video mode, press this button to start/ stop recording.
In playback mode, press this button to play/pause video file
In menu setting, press this button to confirm the menu setting
Down Button
In video mode, press this button to open/close the recording sounds
In playback mode, press this button to choose next file
In playback mode, when playing video file, press this button to forward playing
c. LED Light Status List
LED Light
Status
Meaning
Status Light( Blue)
ON
Device is standby or Playback Mode
Flash
Device is in Recording
Off
Device is off
On
Charging Battery
Off
Charging finish
Charging Light (Red)
d. Product Accessories
1. Car DVR*1
2. Car Charger*1
3. Camera Holder*1
5. Sucker*1
6. USB Cable*1
7. User's Manual*1
6
4. 3M Sticker*1
Basic Operation
a. TF Card Installation
Install the TF card into TF car slot as picture shown:
The same location and way for 700E, 701E, 702E to install the TF card.
7
b. CPL Installation(Optional)
CPL:Circular-Polarizing Filters, could reduce the reflection of inner car on the car window
Without CPL
With CPL
adjustment circle ring
Install CPL onto device thru screw on device camera.
And after install CPL onto device and install device onto
car window, rotate the adjustment circle ring on CPL to
get the good Polarized effect to car window reflection.
The same way for 700E, 701E, 702E install CPL Lens and UV Lens.
8
c. Rear Camera (Optional) Installation
3.0 Camera holder connect with rear
camera as picture shown:
Connect the extension cable of
rear camera with holder thru USB port
2.0 Camera holder connect with rear
camera as picture shown:
Adapter
Power input
Connect the extension cable of rear camera
with holder thru adapter AV-IN port
9
Power input
d. Power Supplied
Connect USB port and car cigarette with car charger, then start engine, the device will automatically
power on and recording
Connect device USB port available
Note: There are two mini USB port, one is on device, another is on camera holder
e. G- Sensor Function
When there is a collision, Gravity Sensor (G-Sensor) can get the direction and exact data of collision.
Meanwhile, according to setting value in G-Sensor sensitivity, the device determine whether set current
recorded video to protection mode or not, which will not be overwritten by loop recording.
G-Sensor direction as below picture:
700E, 701E, 702E G-Sensor direction are same.
10
f. Video Mode
In video mode, in standby status, LCD display will be shown as below:
Resolution
License plate number
1080FHD
Video mode
Loop recording time
3
picture size
12M
WDR mode
WDR
AAAAAA
LED light on
TF card
LED light off
LED light auto
G-Sensor
Auto Exposure
01:07:38
Recording time remaining
(calculated from the card
remaining space)
1
3
2013/11/06
Date
14:25:30
Time
11
F
Motion detection
P
Parking control
Sounds on
Sounds off
Remaining power
In video mode, in recording status, LCD display will be shown as below:
Rear camera picture
Resolution
License plate number
1080FHD
Video mode
3
picture size
12M
G-Sensor
Auto Exposure
TF card
00:03:38
File protection lock
720FHD
Loop recording time
WDR mode
AAAAAA
Recording time remaining
(calculated from the card
remaining space)
LED light
WDR
1
3
2013/11/06
Date
14:25:30
F
Motion detection
P
Parking control
Sounds on
Sounds off
Remaining power
Time
Note: Only connect with rear camera the LCD display will show 720P and picture in picture( without rear
camera no display)
12
g. Take picture
In video mode, in any time, press photo button to take picture
In playback mode, when video playing, press photo button to take snapshot of current video
i. Playback mode
Press mode button to enter playback mode, then press menu button to choose preview video/picture file.
Use the direction button to control playback operation.
Preview
Up Button
Previous file
Down Button
Next file
OK Button
Confirm
Mode Button
Switch mode
Play
Up Button
Playback
Down Button
Forward playing
OK Button
Confirm
Menu Button
Enter menu list (delete/ protect/slide show)
Mode Button
Back to nine grids preview
13
Menu Setting
The device has two mode: Video Mode and Playback Mode.
a. Video Mode:
Video
Menu Item
Remark
Video Resolution 1080p/720p/WVGA
Set video resolution
Dual Record
Off/ On
Set Dual Record off/ on
Loop Setting
Off/ 2min/3min/5min
Set recording time
Picture
Resolution
12M/8M/5M/2MHD
Set picture resolution
Exposure
-2.0~+2.0
Set "+" can avoid exposure weaker, set "-" avoid exposure
stronger
White Balance
Auto/ Daylight/ Cloudy/
Tungsten/ Fluorescent
In normally choose auto, if in auto status no have nature color,
please set white balance depend on light condition
WDR
Off/ On
Set WDR off/ on
Motion Detection Off/ Low/Medium/ High
Set motion detection
Parking Monitor
Set parking monitor off/on
Off/ On
G SENSOR SET Off/ Low/ Medium/ High
Set G Sensor
Record Audio
Off/ On
Set record auto off/ on
Date Stamp
Off/ On
Set date stamp off/on
Plate number on
movie
AAAAAA
Set plate number
Car Plate Stamp
Off/ On
Set car plate stamp
Image Rotation
Off/ On
Set image rotation
14
Setup
Menu Item
Remark
Date
YY/ MM/ DD
Set date/ time
Power on delay
Off/ 10sec/ 20sec/3 0sec
Set power on delay
Power off delay
Off/ 10sec/ 20sec/ 30sec
Set power off delay
Auto Power Off
Off/ 1min/ 3min/ 5min
Set this item, in standby status, if no motion the device will
turn off auto in set time
Beep Sound
Off/ On
Set beep sound off/ on
Screen savers
Off/ 30sec/ 60sec
Set this item, if no motion, the screen will closed depend on
the set time, into sleep mode, enter free button can wake up.
Note: press up button can closed manual or set close screen
on menu list. it will light press any button.
Keyboard
backlight
Auto/ Off/ On
To set the key light function. when set "auto", the key light on/
off will synchronize with LCD screen, when LCD screen is on,
key light will on, when LCD screen is off, key light will be off.
When this value set "on" the key light will be on all the time
after device is powered on. when this item set "off", key light
will be off all the time.
Lamp setting
Auto/ Off/ On
Set lamp setting auto/ off/ on
TV Mode
NTSC/ PAL
Set TV mode
Frequency
50Hz/ 60Hz
Set frequency
Language
English/ Russia/ etc
Set language
Format
Cancel/ OK
Format All data will be deleted
Default Setting
Cancel/ OK
Return menu setting to defaults
Version
CR700E_V1.3_20150410
15
b. In playback mode:
Delete file
No/ Only this/ All
Delete currently or all unlock file, lock file need to be unlock then
can delete
File Protection
protect current file/
unprotected current file
protect all file/ unprotected all file
Slide show
2sec/ 5sec/ 8sec
If set this item, the video will automatically play one by one
Connection
A. Connect to TV
The device can output the video to Video equipment (TV or Monitor) to playback the data or adjust the
setting.
1. Insert SD card to device
2.Connect the HDMI cable to the video equipment (TV or Monitor) and the device
3. Power on the device
4. Adjust the channel of the video equipment to HDMI input
5. Installation completed
Note: When connect with TV, the device LCD screen will automatically shut off.
B. Connect to Computer
1. Insert SD card to device
2. Connect USB cable to device and computer, "Memory/Video" will be shown on screen, and choose
memory, the removable disk will be shown on computer.
3. Enter the removable disk, you could replay picture file or video file
4. Connect computer with device, choose video, can set device in normal
16
Product Specification
Chipset
Resolution
View Angle
Standard
Video
Resolution
Rear Camera (Optional)
Auto
Still Image
LCD
Camera
G-Sensor
Filter Lens (Optional)
Other Function
SD Card Slot
OSD Language
Interface
USB
AV Terminal
Battery
Power
Color
Size
NTK96655
3Mega CMOS Sensor, AR0330
110° Horizon Angle in 1080P
MOV file, H.264
1920x1080 30fps / 1280*720 30fps
720p rear camera
Built-in Microphone, could be turn off by menu or button
4032*3024 / 3264*2448 / 2592*1944 / 2048*1536 / 1920*1080
2.7inch LCD Display
When encounter heavy hit, the device will automatically protect the latest files, so they can't
be deleted
CPL: Circular-Polarizing Filters, could reduce the reflection of inner car on the car window
UV Lens: Protect the DVR lens
Light Keyboard for Night Operation
Uninterrupted Cycle Recording, Over-write first file if memory is full, no interruption between
Video File
File Protection Function, once file is protected, it wouldn't be delete during cycle recording
Automatically Recording after Car power on
Support Micro SD Card, up to 32GB
English/ Chinese/ Russian/ etc
USB 2.0
HDMI
700E. 701E built-in 500mAh Battery, 702E built-in 250mAh Battery
12~24V Car Charger
Black
700E: 103*51*40mm 701E: 103*51*41mm 701E: 103*51*41mm
17

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project