DDC-SE-01

DDC-SE-01
DDC-SE-01
IQRF Development Daisy Chain
Sensor kit
User's Guide
© 2016 MICRORISC s.r.o.
www.iqrf.org
User_Guide_DDC-SE-01_160203
Page 1
DDC-SE-01
Description
A sensor development kit for IQRF wireless applications
with transceiver modules (TR) plugged in DK-EVAL-04
kit. Compatible with other DDC (Development Daisy
Chain) kits.
Ready-to-use examples are available demonstrating how
to use I2C and Dallas 1-wire buses and A/D converter
inside TR to measure temperature, voltage etc.
Applications
Key features
• Development of IQRF applications
• Compatible with other IQRF DDC kits
• I C and Dallas 1-wire bus demonstration
• Supplied from DK-EVAL-04
• A/D measurement demonstration
• I2C temperature sensor
2
• I2C bus connector to access external peripherals
• Dallas 1-wire temperature sensor
• Light intensity measurement using a photoresistor
• Voltage measurement using a potentiometer
Simplified schematics
© 2016 MICRORISC s.r.o.
• Internal voltage LDO regulator
www.iqrf.org
User_Guide_DDC-SE-01_160203
Page 2
DDC-SE-01
Electrical specifications
(typical values unless otherwise stated)
Power supply (VDD)
Internal supply voltage (VCC)
3.2 V to 5.5 V DC
3V
Supply current (when peripherals inactive)
650 µA
Temperature range
0 °C to +70 °C
Dimensions
Weight
48 mm x 27 mm x 11 mm
10 g
Absolute maximum ratings
Stresses above those values may cause permanent damage to the device. Exposure to maximum rating conditions for
extended periods may affect device reliability.
Supply voltage:
Storage temperature:
6.0 V
-40 °C to +85 °C
Hardware
Power supply
DDC-SE-01 should be supplied from DK-EVAL-04 via connector XC2.
Interface connectors
The XC2 male connector with square 0.635 mm, 2.54 mm pitch pins
is intended for I/Os and power supply.
Corresponding XC1 female connector serves for interconnection with
other DDC kits.
XC3 is a 1.25 mm pitch miniature connector DF13C-5P (Hirose).
Mating Hirose cable connector: DF13-5S (plastic shell), DF13 crimp
contacts.
Jumper JP1
•
•
In position 1 – 2 enables 1-wire sensor.
In position 2 – 3 enables I2C temperature sensor and I2C
external bus.
Sensors
I2C temperature sensor: MCP9802A3 (Microchip) with fixed I 2C
slave address 10010110 (in binary).
• External I2C device must have I2C slave address different from
10010110 (in binary).
• 1-wire temperature sensor: DS1820B20 (Dallas).
• Photoresistor: A906013 by Perkin Elmer. Resistance 8 kΩ at 100 lux, dark resistance ~1.5 MΩ.
•
Refer to datasheets of used devices.
Software
Ready-to-use examples are available in the Startup package at www.iqrf.org.
© 2016 MICRORISC s.r.o.
www.iqrf.org
User_Guide_DDC-SE-01_160203
Page 3
DDC-SE-01
Product information
Pack list
• DDC-SE-01
DDC sensor kit
Recommended options
•
•
•
•
•
DK-EVAL-04
DDC-IO-01
DDC-RE-01
DF13-5S
DF13
IQRF development kit for TR modules
DDC input/output kit
DDC relay kit
Cable connector fitting to XC3
Crimp contacts for cable connector fitting to XC3
Ordering code
• DDC-SE-01
IQRF sensor DDC kit
Document history
• 160203
• 110415
© 2016 MICRORISC s.r.o.
The value of pull-up resistor on Dallas bus added to simplified schematics.
First release
www.iqrf.org
User_Guide_DDC-SE-01_160203
Page 4
DDC-SE-01
Sales and Service
Corporate office
MICRORISC s.r.o., Prumyslova 1275, 506 01 Jicin, Czech Republic, EU
Tel: +420 493 538 125, Fax: +420 493 538 126, www.microrisc.com
Partners and distribution
Please visit www.iqrf.org/partners
Quality management
ISO 9001 : 2009 certified
Complies with Directive 2002/95/EC (RoHS)
Trademarks
The IQRF name and logo and MICRORISC name are registered trademarks of MICRORISC s.r.o.
PIC, SPI, Microchip and all other trademarks mentioned herein are property of their respective owners.
Legal
All information contained in this publication is intended through suggestion only and may be superseded by updates
without prior notice. No representation or warranty is given and no liability is assumed by MICRORISC s.r.o. with respect to
the accuracy or use of such information.
Without written permission it is not allowed to copy or reproduce this information, even partially.
No licenses are conveyed, implicitly or otherwise, under any intellectual property rights.
The IQRF products utilize several patents (CZ, EU, US)
On-line support: support@iqrf.org
© 2016 MICRORISC s.r.o.
www.iqrf.org
User_Guide_DDC-SE-01_160203
Page 5
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising