Bogen | WBS810T725 | Datasheet | Bogen WBS810T725 loudspeaker

Wall Baffle Wooden
Speaker Assemblies
Models
WBS8T725 & variations,
WBS810T725
Description
Features
WBS8T725
Bogen Wall Baffle Speakers consist of 8" cone speakers (S86 or S810) pre-assembled into a simulated walnut-finished wooden enclosure with a black grille cloth on front.These wall baffles are handsomely styled
and ruggedly built with 3/8" particle board reinforced at the corners. Designed for wall mounting, the face
is angled downward 13.5 degrees. Available options include recessed volume control and terminal strip.
• 4-watt capacity
• 6 oz. or 10 oz. magnet weights
• 6 power taps available (4, 2, 1, 1/2, 1/4, 1/8 watts)
• Recessed volume control available (V models only)
• Works with both 70V and 25V amplifier outputs
• Screw terminals available (BR models only)
• Simulated walnut finish
• Easy wall-mount installation
• Pre-assembled for faster installation
• Mounting hardware included
• 8" cone speaker for excellent audio quality
●
WBS8T725
WBS8T725V
WBS8T725BR
4, 2, 1, 1/2, 1/4, 1/8
@25V & 70V
50 Hz12 kHz
95
dBspl
6 oz.
●
WBS8T725BRV
WBS810T725
Specifications subject to change without notice.
© 2008 Bogen Communications, Inc.
54-7777-09A 0808
70 Hz15 kHz
96
dBspl
10 oz.
●
●
●
18 lb. /
carton
●
●
19 lb. /
carton
20 lb. /
carton
Dimensions
Shipping Weight
(4/Carton)
Screw Terminals (BR)
Recessed Volume
Control (V)
No Volume Control
Magnet Weight
Sensitivity (4 ft./1W)
Frequency Response
Model
Power Taps
(in Watts)
Technical
Specifications
9-1/2" W x
9-1/2" H x
5-1/4" D
(3-1/4" D
@ bottom)
Architect
and Engineer
Specifications
WBS8T725 The surface-mounting loudspeaker
assembly shall be a Bogen model WBS8T725
(or WBS8T725V, WBS8T725BR, or
WBS8T725BRV), or equivalent, 8" cone-type
loudspeaker having a frequency response of at least
50 Hz to 12 kHz. Axial sensitivity shall be 95 dB,
measured at 1-watt/4 feet. The loudspeaker shall
have a 6 oz. ceramic magnet and a 3/4" voice coil. A
transformer, capable of matching an 8-ohm loudspeaker to a 25-volt or 70-volt line, and providing
power taps of 4, 2, 1, 1/2, 1/4, and 1/8 watts shall be
included. The transformer primary and secondary
leads shall be stripped, tinned, and shall be at least 6"
in length.
The loudspeaker shall be assembled in a wall baffle
for surface mounting, angled 13.5 degrees for downward sound dispersion. The baffle shall be constructed of 3/8” particle board, glued and covered in
simulated walnut vinyl. Glue blocks shall be used to
reinforce all side corner joints. The speaker opening
shall be covered with a black grille cloth. Overall
dimensions shall be 9-1/2" W x 9-1/2" H x 5-1/4" D
(top) x 3-1/4" D (bottom).
(For WBS8T725V add) The assembly shall include
a control for adjusting the volume of the loudspeaker.
(For WBS8T725BR add) A terminal strip shall
be included for connection of the audio line.
Terminals shall be labeled for 4, 2, 1, 1/2, 1/4, and
1/8-watt power connection.
(For WBS8T725BRV add) A terminal strip shall
be included for connection of the audio line.
Terminals shall be labeled for 4, 2, 1, 1/2, 1/4, and 1/8watt power connection.A control shall also be included for adjusting the volume of the loudspeaker.
WBS810T725 The surface mounting loudspeaker
shall be a Bogen model WBS810T725, or equivalent, 8" cone-type loudspeaker having a frequency
response of at least 70 Hz to 15 kHz. Axial sensitivity shall be 96 dB, measured at 1-watt/4-feet. The
loudspeaker shall have a 10 oz. ceramic magnet and
a 1" voice coil. A transformer, capable of matching
an 8-ohm loudspeaker to a 25-volt or 70-volt line,
and providing power taps of 4, 2, 1, 1/2, 1/4, and 1/8
watts shall be included. The transformer primary
and secondary leads shall be stripped, tinned, and
shall be at least 6" in length.
The loudspeaker shall be assembled in a wall baffle
for surface mounting, angled 13.5 degrees for downward sound dispersion. The baffle shall be constructed of 3/8" particle board, glued and covered in
simulated walnut vinyl. Glue blocks shall be used to
reinforce all side corner joints. The speaker opening
shall be covered with a black grille cloth. Overall
dimensions shall be 9-1/2" W x 9-1/2" H x 5-1/4" D
(top) x 3-1/4" D (bottom).
Line
Drawings
WBS8T725BR
Rear View
Side View
50 Spring Street, Ramsey, NJ 07446, U.S.A.
Tel: 201-934-8500; FAX: 201-934-9832; www.bogen.com
Download PDF

advertising