Emergency lighting luminaire

Emergency lighting luminaire
SPARK
Emergency lighting luminaire
IP40
1402/2012
General purpose
Spark luminaire, equipped with LED light source, is supposed
to indicate emergency escape routes and emergency exits with
suitable pictograms. Spark can be adopted in public facilities or in
workplaces and it is compatible with all emergency lighting systems
offered by Hybryd.
Additional information about emergency lighting luminaires - p. 24
Technical data
\
LIGHT SOURCE
LED
230VAC/50Hz
Power consumption
Protection class
Radio noice
Protection degree
Light source
Accumulator type
Recharging time
Emergency work time
Ambient temperature
<4W
I
Level N
IP 40
White LED
Ni-MH HT
24h
3h
+10°C ÷ +40°C
2
Connector
4 x 0,5 ÷2,5 mm (maintained)
2
3 x 0,5 ÷2,5 mm (non-maintained)
2
4 x 0,5 ÷1,5 mm (main. W1)
2
3 x 0,5 ÷1,5 mm (non-main. W1)
Dimensions
SPARK - one-sided
168
CATEGORY
Power supply
40
319
Casing
SPARK D - one-sided, big
202
– body material: aluminium
– casing colour: black (different colours available)
– lamp cover: plexiglass with pictogram
– lamp cover colour: frosted
40
404
SPARK DW - two-sided with raising
Available versions
40
35
205
165
40 35
Check final pages of this catalogue.
Mounting types
Check 3rd page of the catalogue cover.
315
SPARK D DW - two-sided with raising, big
242
202
40 35
40
35
404
Hybryd Ltd.
28 Sikorskiego Street, 44-120 Pyskowice
tel: +48 (32) 233 98 83
fax: +48 (32) 233 98 84
R
email: hybryd@hybryd.com.pl
www: hybryd.com.pl
Ltd.
29
Emergency lighting luminaires - versions for ordering
Version with fluorescent lamp
Casing coloure
(RAL code)
Luminaire
Execution
Taw [h]
Work mode
Mounting
CRYSTAL
ST
1
C
C5
9003
C6
*
…
*
P29
AT
2
CT
J
3
9005
C7
CB
W3
CB-MA
W4
9006
CRYSTAL
Pictogram
P01
Example of creating a name: CRYSTAL CT 2C C5 9003 P05
Version with LED
Casing coloure
(RAL code)
Luminaire
Execution
Work mode
Light source
Mounting
CRYSTAL
ST
C
LED
C5
9003
C6
*
…
*
P29
AT
J
CT
C7
CB
W3
CB-MA
Example of creating a name: CRYSTAL AT C LED W3 9003 P09
Version with fluorescent lamp
Luminaire Luminaire
Luminaire
size
type
Execution
Taw [h]
1
AT
2
CT
3
TS
CB
CB-MA
Example of creating a name: ALU AT 2J W2 9003 P02
D
DW
9006
P01
W4
Work mode
ALU
9005
Pictogram
Mounting
1
C
J
W1
W2
C1
C2
ALU
Casing coloure
Pictogram
(RAL code)
9003
9005*
*
9006
P01
…
P29
Version with LED
Luminaire
Luminaire Luminaire
size
type
Execution
Work mode
ALU
AT
C
DW
CT
J
D
TS
CB
CB-MA
Example of creating a name: ALU D CT C LED C2 9003 P12
1)
Mounting type W1 only for one-sided ALU luminaire.
Luminaire
Luminaire Luminaire
size
type
Execution
Work mode
SPARK
Light
source
LED
Light
source
AT
C
LED
D
DW
CT
J
CB
CB-MA
Example of creating a name: SPARK D AT J LED C25 9006 P05
1)
Mounting type W1 only for one-sided SPARK luminaire.
Mounting
W11
W2
C1
C2
Mounting
1
W1
C25
C30
W16
Casing coloure
Pictogram
(RAL code)
9003
9005*
9006*
P01
…
P29
SPARK
Casing coloure
Pictogram
(RAL code)
9006
9003*
*
9005
P01
…
P29
Legend - p. 63
Hybryd Ltd.
28 Sikorskiego Street, 44-120 Pyskowice
tel: +48 (32) 233 98 83
fax: +48 (32) 233 98 84
R
email: hybryd@hybryd.com.pl
www: hybryd.com.pl
Ltd.
59
Emergency lighting luminaires - versions for ordering
Luminaire
Type of housing
Execution
Power [W]
Taw [h]
Work mode
SFERA
N
ST
1x18W
2
J
P
AT
2x18W
CT
1x26W
CB
2x26W
SFERA
1x32W
Example of creating a name: SFERA N CT 2x18W 2J
Luminaire
Type of housing
Execution
Power [W]
Taw [h]
Work mode
SQUARE
N
ST
4x14W
2
J
P
AT
4x18W
CT
2x36W
SQUARE
CB
Example of creating a name: SQUARE P AT 4x18W 2J
Legend:
Photometric body type: see individual product data sheets.
Luminaire size:
Empty field – small
D – large.
Luminaire type or lamp cover:
N – surface mount
P – recessed
DW – luminaire two-sided or lamp cover two-sided.
Execution:
ST – standard
AT – autotest
CT – centraltest
TS – testsystem
CB – central battery,
CB-MA – central battery plus changeover module,
CB-MP – central battery plus addressing module,
CB-MAP – central battery plus changeover + addressing module .
Taw [h] - emergency work time: CB is not defined.
Work mode:
C – non-maintained
J – maintained
N – night (only for CT).
Defined for ST, AT, CT, TS, CB-MA (luminaires LED) i CB-MAP (luminaires fluorescent).
Temperature range:
Empty field - standard temperature range
T – extended temperature range (see technical data) with thermostat H-323.
Casing coloure: fields with “*” available - extended delivery time.
Hybryd Ltd.
28 Sikorskiego Street, 44-120 Pyskowice
tel: +48 (32) 233 98 83
fax: +48 (32) 233 98 84
R
email: hybryd@hybryd.com.pl
www: hybryd.com.pl
Ltd.
63
Accessories for emergency lighting luminaires
Mounting kit C101
Mounting kit designed to hang down luminaires PRYMAT, PRIMOS
and HERKULES-P.
ATTENTION!
Strings or chains should be ordered separately.
Mounting kit C105
Mounting kit designed for mounting luminaires PRIMOS, PRYMAT
and HERKULES-P in suspended ceilings.
Mounting kit W121
Wall mounting kit designed for luminaires PRIMOS, PRYMAT and
HERKULES-P. It allows mounting luminaire on the wall
perpendicularly to it and for folding luminaire from the level 15,
30, 45, 60, 75 or 90 °. Using a mounting W121 luminaire is directed
to the shorter side of wall.
Mounting kit W122
Wall mounting kit designed for luminaires PRIMOS, PRYMAT and
HERKULES-P. It allows mounting luminaire on the wall
perpendicularly to it and for folding luminaire from the level 15,
30, 45, 60, 75 °. Using a mounting W121 luminaire is directed to
the longer side of wall.
Mounting kit W131
Mounting kit designed for surface mounting of KWADRA luminaire
on the wall in the way that the light is directed to the floor. It is
recommended to use luminaire with SIDE type photometric body
with mounting kit W131.
Reinforcement for soft ceilings
Addition designed for recessed execution of KWADRA luminaire. It
allows mounting of luminaire in soft ceilings eg. in fiberglass
ceilings.
Strings , chains
Steel strings, galvanized chains DIN 5685-A – designed for
mounting pendant luminaires.
Chains available in dimension DIN 5685-A 1,5x12.
R
64
Ltd.
email: hybryd@hybryd.com.pl
www: hybryd.com.pl
tel: +48 (32) 233 98 83
fax: +48 (32) 233 98 84
Hybryd Ltd.
28 Sikorskiego Street, 44-120 Pyskowice
Versions, functions
Emergency lighting luminaires
Versions - testing, monitoring
ST = Standard - emergency work test executed by turning off power supply
AT = Autotest - automatic and periodic test execution:
TEST A - lamp efficiency test, monthly;
TEST B - emergency work time measurement, annually;
CT = Centraltest - communication with the central unit or PC, full addressing of the luminaires, luminaires visualisation, system status
reporting, many testing options, manual testing;
TS = Test System - communication with H-101TS central unit,
many testing options, manual testing with the use of H-101TS central unit
CB = Central Battery - 220V DC power supply from central battery, built-in LED 220VDC ballast and LED module;
BU = Buffer Supply - luminaire adapted for 12-24V DC buffer feeders, built-in LED 12-24V DC ballast and LED module.
Functions
1. Automatic power supply switch: basic work/emergency work. (only ST, AT, CT and TS).
2. Luminaire and accumulator state indication (only ST, AT, CT and TS).
3. Supervision of 230V power supply voltage and accumulator condition (only ST, AT, CT and TS).
4. Deep accumulator discharge protection (only ST, AT, CT and TS).
5. Automatic test execution (only AT, CT and TS).
6. Light source work supervision.
Indication
The luminaire condition is indicated by LED. There is no LED indication during emergency mode:
Green - accumulator condition (only ST, AT, CT, TS)
Red - luminaire condition (only AT, CT, TS).
More details described in product manuals.
Lighting versions
Maintained (M) - basic lighting provided all the time (uses 230V); in case of power supply failure switches automatically into emergency mode
(accumulator).
Non-maintained (NM) - standby mode as a standard (no lighting); in case of power supply failure switches automatically into emergency mode
(accumulator).
R
24
Ltd.
email: hybryd@hybryd.com.pl
www: hybryd.com.pl
tel: +48 (32) 233 98 83
fax: +48 (32) 233 98 84
Hybryd Ltd.
28 Sikorskiego Street, 44-120 Pyskowice
Mounting types
15 cm
C12
PROFIL
15 cm
C13*
C14*
C15
C16
C17
C18
W7
W8
W9
W10
W11
W12
CRYSTAL
C5
C6
C7*
W3
W4
ALU
6 cm
C1*
C2
W1
W2
SPARK
30 cm
6 cm
C30
C25
30 cm
30 cm
W1
W16
PROFILIGHT
15 cm
8,5 cm
C5
C24
C25
C32
C26
W4
W17
H-207 SUPERNOVA
H-207 TELESTO
*
OWA LED
KWADRA ORBIT LED
KWADRA ORBIT LED
OWA ATOM LED OWA POWER LED
KWADRA P
KWADRA N
W131
C101*
C105
W121
W122
PRIMOS
PRYMAT
PRYMAT DW
ACCESSORIES
(ordered separately)
* Strings or chains available on request.
1)
Requires access to ceiling void.
2)
Only for ST, CB.
- CONSTANT CEILING
LEGEND
- SUSPENDED CEILING
- MODULAR CEILING
Pictograms
P01
P15
P02
P16
P03
P17
P04
P18
P05
P20
P06
P21
P07
P22
P08
P23
P09
P24
P10
P25
P11
P26
P12
P27
P13
P28
P14
P29
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising