optional motion activated led dimmer control

optional motion activated led dimmer control
®
OPTIONAL
MOTION ACTIVATED
LED DIMMER CONTROL
FOR REACH-IN GLASS DOORS
AND MULTI-DECK MERCHANDISERS
INSTALLATION AND
OPERATION MANUAL
P/N 0503155_A
November 2008
P/N 0503155_A
LED Dimmer Control
Installation and Operation Manual
Parts List
Item
1.
2.
3.
4.
Quantity
Description
. . . . . . . . . . . . . 1 . . . . . . . . . . . . . . . . . . . . . . . Motion Detector
. . . . . . . . . . . . . 1 . . . . . . . . . . . . . . . . . . . . . . . Motion Detector Cover
. . . . . . . . . . . . . 1 . . . . . . . . . . . . . . . . . . . . . . . Motion Detector Mounting Bracket
. . . . . . . . . . . . . 2 . . . . . . . . . . . . . . . . . . . . . . . Screw Self-Tapping Hex Head 6-32 x 5/8 in.
REVISION HISTORY
REVISION A
1. Original Issue Nov. 2008
ANSI Z535.5 DEFINITIONS
• DANGER – Indicate[s] a hazardous situation which, if
not avoided, will result in death or serious injury.
• WARNING – Indicate[s] a hazardous situation which,
if not avoided, could result in death or serious injury.
• CAUTION – Indicate[s] a hazardous situation which,
if not avoided, could result in minor or moderate injury.
• NOTICE – Not related to personal injury – Indicates[s]
situations, which if not avoided, could result in damage to
equipment.
IMPORTANT
KEEP IN STORE FOR FUTURE REFERENCE
Quality that sets industry standards!
12999 St. Charles Rock Road • Bridgeton, MO 63044-2483
U.S. & Canada 1-800-922-1919 • Mexico 1-800-522-1900
www.hussmann.com
© 2008 Hussmann Corporation
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A. • WWW.HUSSMANN.COM
iii
P/N 0503155_A
LED Dimmer Control
Installation and Operation Manual
GENERAL INFORMATION
The HUSSMANN ® Motion
Activated LED Dimmer
Control regulates the brightness of the merchandiser’s
LED lighting. A passive
infrared motion detector located on the top front center of
merchandisers or on the wall
for wall mounts, detects the
presence of approaching
individuals.
N OTE : T HE
Motion Sensor
LED Indicator
Motion Detector
MOTION DETECTOR
IS AVAILABLE IN GRAY, BLACK
P1
P2
P3
P4
AND PEARL .
A signal is passed to the
dimmer control, which is conne cted to the LED lighting
power supp ly.
The dimmer control receives a
signal from the motion detector and adjusts the brightness
of the merchandiser’s LED
lights accordingly.
The amount of LED brightness
emitting from the merchandiser
lights can be modulated from
100% to 0%, 20% or 50% as
selected by the installer. The
Motion Activated Dimmer
Control regulates the application of power to the LED
lighting and is powered by a
LED 24vdc power supply.
Program Selector Button
LED Indicator
Dimmer Control
LED 24VDC Power Supply
! CAUTION
To avoid overheating and possible damage to
other equipment, DO NOT use dimmers to
control receptacles, or fluorescent
lighting fixtures.
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A. • WWW.HUSSMANN.COM
1
P/N 0503155_A
®
OPERATION
Canopy LEDs
When power is first applied to
the Motion Activated LED
Dimmer Control, The LED
Indicator flashes two times and
the LED lights are set to dim
at 20%. The dimmer control
can be set to dim the LED
lights to 0%, 20% and 50%
respectively.
The dimmer level remains at
20% for five seconds, and is
then elevated to 100%. After
one minute, the motion
detector “learns” the background environment. During
this time, the output will
remain at 100%. If no motion
is detected after 30 seconds,
the LED brightness will dim to
the selected output minimum
from the dimmer control.
This dimming takes place over
a period of three seconds as
the lighting is reduced from
100% to the selected minimum
as programmed on the dimmer
control. The minimum setting
can be set to 0% (off), 20%
(default setting), or 50%.
Shelf LEDs
D6X Multi-deck Merchandiser
Door LEDs
When motion is detected again,
the LED brightness will
increase to 100% over one
second. Lighting will again
remain at 100% until 30
seconds of no detected motion.
RL Merchandiser
2
U.S. & Canada 1-800-922-1919 • Mexico 1-800-522-1900 • WWW.HUSSMANN.COM
P/N 0503155_A
LED Dimmer Control
Installation and Operation Manual
PROGRAM
DIMMER CONTROL
The Motion Activated LED
Dimmer Control is factory
installed and set to 20%
minimum LED brightness. The
dimmer control is located near
the merchandiser’s LED lighting power supplies. This may
require the installer to remove
the case bumper and front
panel to access the wireway or
to open the canopy lamp panel.
Locate the dimmer control.
Press and hold the program
selector button on the dimmer
control for three seconds. This
enters the Motion Activated
LED Dimmer Control’s
program mode. The LED on
the dimmer control will flash
four times.
From program mode, press the
program selector button one
time, and the LED on the
dimmer control will flash one
time. Case LEDs will turn off.
The case LED lights are now
set to dim to 0%minimum.
MOTION DETECTOR
SWITCH
From program mode, press the
program selector button twice,
and the LED on the dimmer
control will flash two times,
Case LEDs will illuminate to
20%. The case LED lights are
now set to 20% minimum.
From program mode, press the
program selector button three
times, and the LED on the
dimmer control will flash three
times. Case LEDs will illuminate to 50%. The LED lights
are now set to 50% minimum.
Program mode times out after
30 seconds. (This is the only
way to exit program mode.)
After 30 seconds, the case
LEDs will illuminate to 100%
to indicate exit from program
mode.
A switch on the side of the
motion detector has two
settings ON and DIM.
When the switch is set to ON,
the merchandiser LEDs will
power to 100%, bypassing the
motion sensor.
The motion sensor will operate
normally when the switch is set
to DIM.
SWITCH
NOTE: Dimmer Control is
factory set to 20% minimum
LED brightness.
P1
P2
P3
P4
Dimmer Switch in
“ON” position.
NOTE:
Do not paint motion detector.
Painting motion detector may
cause overheating, or loss of
motion sensing capability.
Do not mount motion
detector in outdoor areas.
Program Selector Button
LED Indicator
Dimmer Control
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A. • WWW.HUSSMANN.COM
3
P/N 0503155_A
®
INSTALLATION
INSTRUCTION FOR
MULTI-DECK CASES
1. D ISCONNECT
POWER TO THE
Remove all
packaging materials, and check
parts list. Place mounting
bracket at top, front center of
canopy. The bracket mounts 1 1/4
in. from the front edge of the canopy.
Mark canopy bracket screw
locations using the bracket
holes as a reference.
MERCHANDISER .
2. Drill two self-tapping sheet
metal screws (Item 4) through
mounting bracket into the top
of the case canopy. Secure
mounting bracket in place.
(See Detail A for mounting
screw locations).
Drill Screws here
DETAIL A
Mounting Bracket
Motion Detector
with cover removed
RJ-11 connector
through bushing
Insert Screws here
3. Remove motion detector
cover. The factory installed
RJ-11 connector cord can be
found on top of case.
4. Mount motion detector to
mounting bracket using screws
as shown in Detail B. Replace
cover.
DETAIL B
! WARNING
— LOCK OUT / TAG OUT —
To avoid serious injury or death from electrical
shock, always disconnect the electrical power
at the main disconnect when installing,
servicing or replacing any electrical
component. This includes, but is not limited
to, such items as dimmer controls, doors,
lights, fans, heaters, and thermostats.
4
U.S. & Canada 1-800-922-1919 • Mexico 1-800-522-1900 • WWW.HUSSMANN.COM
P/N 0503155_A
LED Dimmer Control
Installation and Operation Manual
INSTALLATION
INSTRUCTION FOR
REACH-IN CASES
Motion Activated LED
Dimmer Control Installation
instructions for reach-in cases
are similar to multi-deck cases.
The factory-installed RJ-11
connector cord is positioned
from the top to the back of the
case and underneath case to
front wireway on RL/RLN case
models. Dimmer Control may
be accessed by removing the
bumper and front panel for
RL/RLN merchandisers.
For RLT cases, the factory
installed RJ-11 cord is routed
through a knockout recess at
the top front center of the
case, and the Dimmer Control
is located in the canopy
wireway. The motion detector
bracket is to be mounted at the
top front center edge of the
case for all RL case models.
Dimmer Control
RJ-11
Connector Cord
Dimmer Control in RL
front Wireway near Floor
20ft RJ-11 Connector Cord
Installed on RL Case
Insert Screws here
Motion Detector Installed
on RLT Case
Motion Detector Installed
on RL Case
INSTALLATION
INSTRUCTION FOR
WALL MOUNTS
The motion detector can be
mounted on most hard
surfaces. Select a mounting
location for the bracket. Use
the bracket for reference, and
mark the screw locations on
the wall with a marker. Insert
appropriate wall anchor,
(depending on type of wall
surface), and attach with two
screws (not provided).
Tighten Screws here
Bracket Hole Locations for
Motion Detector
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A. • WWW.HUSSMANN.COM
Motion Detector
Mounted on Wall
5
P/N 0503155_A
®
TROUBLE SHOOTING
GUIDE
Problem
Case LEDs stay at 100%
after one and a half
minutes of operation.
Case LEDs stay at 100%.
What to Check for
Possible Causes
Solution / Action
Dimmer Control has a
startup delay of about
one and a half
minutes, and the
Motion Sensor had
not warmed up.
Wait more than two minutes
for Motion Sensor to dim to
programmed setting on
Dimmer Control.
LED Indicator on Motion Detector is
Sensor sensing
“ON.”
motion.
Ensure all objects remain
motionless in the view of
Motion Detector for more
than 30 seconds.
LED Indicator on Motion Detector is
“ON.”
Dimmer Control LED Indicator is lit.
Dimmer Control LED Indicator is lit.
LED Indicator on Motion Detector is
Case LEDs stay at 100%.
“ON.”
Dimmer Control LED Indicator is lit.
Case LEDs stay at 100%.
Switch on Motion
Move Motion Detector switch
Detector is in the “ON” to “DIM” position.
position, bypassing
the Dimmer Control.
LED Indicator on Motion Detector is
Dimmer Control is
Wire Power Supply to the
“ON.”
wired backwards.
Dimmer Control input and the
LEDs to the Dimmer Control
Dimmer Control LED Indicator is lit.
Case LEDs stay at 100%.
output.
LED Indicator on Motion Detector is
RJ-11 connector is not Install new RJ-11 Connector
“OFF.”
properly seated or bad Cord.
RJ-11 Connector Cord.
Dimmer Control LED Indicator is lit.
No motion is present.
Bad Dimmer Control.
Install new Dimmer Control.
Bad Motion Detector.
Install new Motion Detector.
Case LEDs stay at 100%.
Dimmer Control LED Indicator flashes
at 1-second interval.
Motion Detector detects no motion.
Case LEDs stay at dimmed LED Indicator on Motion Detector is
“OFF.”
level.
Dimmer Control LED Indicator flashes
at 1-second interval.
6
U.S. & Canada 1-800-922-1919 • Mexico 1-800-522-1900 • WWW.HUSSMANN.COM
P/N 0503155_A
LED Dimmer Control
Installation and Operation Manual
Motion sensor range when mounted on an 8ft.
Feet from sensor
Feet from sensor
8ft.
6ft.
0
Sensor
4ft.
Front of
merchandiser
4ft.
6ft.
8ft.
Front of
merchandiser
2ft.
2ft.
4ft.
4ft.
6ft.
6ft.
8ft.
8ft.
10ft.
10ft.
12ft.
12ft.
14ft.
14ft.
16ft.
16ft.
Top
Direction walking
Merchandiser
8ft.
Floor
Side View
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A. • WWW.HUSSMANN.COM
7
P/N 0503155_A
®
Motion sensor range when mounted on a 8ft.
Feet from sensor
8ft.
6ft.
4ft.
Feet from sensor
2ft.
0
2ft.
4ft.
6ft.
8ft.
Sensor
Front of
merchandiser
Front of
merchandiser
2ft.
2ft.
4ft.
4ft.
6ft.
6ft.
8ft.
8ft.
10ft.
10ft.
12ft.
12ft.
14ft.
14ft.
16ft.
16ft.
Direction walking
Top
DETECTION PATTERN
Merchandiser
8ft.
© IR-TEC International Ltd.
Reprinted with permission.
Ceiling Mount
Front View
Side View
2.4 m
Floor
C
Side View
8
B
A
B
C
5m
U.S. & Canada 1-800-922-1919 • Mexico 1-800-522-1900 • WWW.HUSSMANN.COM
P/N 0503155_A
LED Dimmer Control
Installation and Operation Manual
Motion sensor range when mounted on a 5ft.
merchandiser facing straight ahead
Feet from sensor
8ft.
6ft.
4ft.
Feet from sensor
2ft.
Front of
merchandiser
0
Sensor
2ft.
4ft.
6ft.
8ft.
Front of
merchandiser
2ft.
2ft.
4ft.
4ft.
6ft.
6ft.
8ft.
8ft.
10ft.
10ft.
12ft.
12ft.
Top
Direction walking
Merchandiser
5ft
DETECTION PATTERN
Floor
© IR-TEC International Ltd.
Reprinted with permission.
Side View
Wall Mount
Side View
Top View
90°
1.5m
10m
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A. • WWW.HUSSMANN.COM
9
P/N 0503155_A
®
RL WITH ONE POWER SUPPLY
Motion Detector
DIM
1
2
3
4
ON
P1
1
10
LED Dimmer
Control
CASE LEDS
P2
1
P3
P4
1
5
2
4
3
3
4
2
5
1
U.S. & Canada 1-800-922-1919 • Mexico 1-800-522-1900 • WWW.HUSSMANN.COM
P/N 0503155_A
LED Dimmer Control
Installation and Operation Manual
RL WITH TWO POWER SUPPLIES
Motion Detector
DIM
1
2
3
CASE LEDS
4
ON
P1
1
24VDC Power Supply
LED Dimmer
Control
P2
1
P3
P4
1
5
2
4
3
3
4
2
5
1
24VDC Power Supply
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A. • WWW.HUSSMANN.COM
11
P/N 0503155_A
®
MULTI-DECK MERCHANDISERS
LED Dimmer Control
4 in.
P1
P2
1
1
CASE LEDS
12 in.
Left Canopy
Power Supply #2
4 in.
8 in.
30 in.
60 in.
110 in.
P3
P4
1
5
2
4
3
3
4
2
5
1
12 in.
12 in.
12 in.
60 in.
100 in.
Power Supply #1
Right Canopy
Motion Detector
DIM
Power Supply #3
1
2
3
4
ON
Left Shelf
Power Supply #4
Center Shelf
Power Supply #5
Right Shelf
12
U.S. & Canada 1-800-922-1919 • Mexico 1-800-522-1900 • WWW.HUSSMANN.COM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising