series 12c - Pathway Lighting

series 12c - Pathway Lighting
Fixture Type
APPROVAL
Lamp Type
Job Ref. / Location
STANDARD FEATURES
q
q
q
q
q
q
q
Dual Voltage Input - 120/277 VAC 60 Hz.
Factory cycle tested for reliability.
Shipped assembled, ready to install.
Easy mounting with keyhole slots &universal knockout mounting cluster.
Rugged 20 gauge steel construction, buff white baked enamel finish.
Standard with (2) top mounted fixtures in buff white
Provisions for up to (3) additional fixtures.
SERIES 12C
12 Volt Emergency Lighting
CHARGER/BATTERY
q Solid state, patented POWER PULSE* charger.
q Sealed lead acid maintenance free battery –
8 to 15 year life expectancy.
q Low battery voltage disconnect, brownout, power-on latch,
solid state switch.
q Temperature compensation.
q Controls: Red LED power on. Yellow LED charge light.
q Push to test switch.
q D.C. fuse (1) 15 amp. * Patent No. 4890004
Listed
Available with
SVS
SAVE INSTALLATION TIME Our exclusive "QUIK-E" mounting
knockouts allow you to mount to a single gang or 4" octagon
junction box without removing the "J" box screws.
SELF VERIFIED SYSTEM
SELECTION GUIDE
MODEL NUMBER
WITHOUT
WITH (2) PAR-36
LIGHTING FIXTURES LIGHTING FIXTURES
LAMP
WATTAGE*
D.C.
VOLTS
TOTAL D.C. WATTAGE
FOR SUSTAINED ILLUMINATION
1.5 HOURS
2 HOURS
4 HOURS
12C50
12C50-2L
9
12
50
40
22
12C100
12C100-2L
9
12
100
84
44
*Note: Lamp type and/or wattage may be substituted to suit specific application requirements. (Specify below.)
NOMINAL DIMENSIONS
6-1/4"
13-1/2"
1/2"
K.O.'s
1/2"
K.O.'s
1/2"
K.O.
8"
13"
7-1/2"
5-1/4"
INDICATOR
LIGHTS
&
TEST
SWITCH
UNIVERSAL
MOUNTING
HOLES
AC ON
VOLTS WATTS SUFFIX #
q12 7.2 # ( 7.2 )
q12
12
# ( 12 )
SEALED BEAM
q 12
18
# (SB18)
q12
25
# (SB25)
HALOGEN
VOLTS WATTS
q12
8
q12
12
SEALED BEAM
q12
8
q12
12
SUFFIX#
# ( 8H )
# (12H )
HALOGEN
# (SBH8)
# (SBH12)
T
E
S
T
12-3/4"
TECHNICAL DATA
HIGH INTENSITY
INCANDESCENT
FULL CHARGE
12 Volt Wire Runs for Remote Loads*
OPTIONAL LAMPS
Total
Allowable Wiring Distance
Watts................. #12 Wire........... # 10 Wire
25............................85'....................... 135'
50............................42'........................ 67'
100...........................21'........................ 33'
*6 Volt – Multiply Distance by .24
INPUT....................120/277 VAC............60Hz - 24 Watts
OPTIONS AND ACCESSORIES
Options Add Suffix
Voltmeter....................................................... #– V
Ammeter ...................................................... #– A
3 Ft. Cord Set................................................. #– CP3
Time Delay for use with HID.............................. #– TD
Lamp Disconnect Switch................................... #– LD
Battery Disconnect Switch................................ #– BD
Self Verified System.......................................... #– SVS
220V 50Hz Input............................................ #– 220V50
Accessories Polycarbonate Shield........................................ #– PS5
Mounting Bracket............................................ #– MB1
Wire Guard.................................................... #– WG3
All exits manufactured in accordance with U.L. standard 924, and meet or exceed requirements as established by the
National Electrical Code Article 700 and Life Safety Code NFPA101. Specifications subject to change without notice.
EM10.0
CUCECL
Pathway Lighting Products, Inc., P.O. Box 591, Old Saybrook, CT 06475-0591
voice: 800.342.0592 • fax: 800.207.0090 • www.pathwaylighting.com • e-mail: sales@pathwaylighting.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising